Sol–gel synthesis and optical properties of titanium dioxide thin film

2018 ◽  
Vol 32 (09) ◽  
pp. 1850076 ◽  
Author(s):  
Irfan Ullah ◽  
Shaukat Ali Khattak ◽  
Tanveer Ahmad ◽  
Saman ◽  
Nayab Ali Ludhi
Keyword(s):  
Thin Film ◽  
Titanium Dioxide ◽  
Optical Properties ◽  
Band Gap ◽  
Surface Defects ◽  
Sol Gel ◽  
Luminescent Properties ◽  
Localized States ◽  
Indirect Transition ◽  
Transmission And Absorption

The titanium dioxide (TiO2) is synthesized by sol–gel method using titanium-tetra-iso-propoxide (TTIP) as a starting material, and deposited on the pre-cleaned glass substrate using spin coating technique at optimized parameters. Energy dispersive X-ray (EDX) spectroscopy confirms successful TiO2 growth. The optical properties concerning the transmission and absorption spectra show 85% transparency and 3.28 eV wide optical band gap for indirect transition, calculated from absorbance. The exponential behavior of absorption edge is observed and attributed to the localized states electronic transitions, curtailed in the indirect band gap of the thin film. The film reveals decreasing refractive index with increasing wavelength. The photoluminescence (PL) study ascertains that luminescent properties are due to the surface defects.

Properties of TiO2 Thin Film Prepared by Sol-Gel Dip Coating

2015 ◽  
Vol 723 ◽  
pp. 528-531
Author(s):  
Jun Wang ◽  
Ling Yun Bai
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Refractive Index ◽  
Optical Properties ◽  
Band Gap ◽  
Optical Band Gap ◽  
Sol Gel ◽  
Dip Coating ◽  
Gel Method ◽  
Glass Substrates

TiO2 thin films were prepared on glass substrates by sol-gel method. The effect of withdraw speed on the thickness and optical properties of TiO2 thin films was investigated. The films were transparent in the visible wavelength. The thickness of the TiO2 films was increased from 90 nm for the withdraw speed of 1000 μm/s to 160 nm for the withdraw speed of 2000 μm/s. While, The refractive index of the TiO2 thin film decreased from 2.38 to 2.07. It may be due to the porosity of the film was increased. The optical band-gap of the films was around 3.45 eV.

Optical Properties of Fe-Doped TiO2 Thin Film Prepared by Sol-Gel

2013 ◽  
Vol 395-396 ◽  
pp. 20-23 ◽  
Author(s):  
Jun Wang ◽  
Long Huang
Keyword(s):  
Thin Film ◽  
Contact Angle ◽  
Optical Properties ◽  
Band Gap ◽  
Anatase Phase ◽  
Sol Gel ◽  
Cutoff Wavelength ◽  
X Ray Diffraction ◽  
X Ray ◽  
Fe Ions

Undoped and Fe-doped (Fe ions content was 0.1) TiO2thin film prepared by Sol-gel method. X-ray diffraction (XRD) results showed that TiO2gel annealed at 500°C was crystallized anatase phase. The contact angle for undoped and Fe-doped TiO2thin film was 47.1° and 8.8°. The transparent spectra showed that the cutoff wavelength of was red shift. The band-gap of Fe-doped TiO2film was 3.47 eV.

Structural and Optical Properties of Al Co-Doped ZnCoO Thin Film

2014 ◽  
Vol 989-994 ◽  
pp. 656-659
Author(s):  
Ping Cao ◽  
Yue Bai
Keyword(s):  
Thin Film ◽  
Optical Properties ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
Structural And Optical Properties ◽  
Al Doping ◽  
X Ray ◽  
Uv Emission ◽  
Uv Absorption Spectroscopy ◽  
Co Doped

Al co-doped ZnCoO thin film has been prepared by a sol-gel method. The structural and optical properties of the sample were investigated. X-ray diffraction and UV absorption spectroscopy analyses indicate that Al3+ and Co2+ substitute for Zn2+ without changing the wurtzite structure. With the Al doping, the visible emission increased and the UV emission decreased, which is attributed to the increase of O vacancies and Zn interstitials.

Synthesis and Film Investigation of Titania

2013 ◽  
Vol 832 ◽  
pp. 128-131
Author(s):  
Sharipah Nadzirah ◽  
Uda Hashim
Keyword(s):  
Thin Film ◽  
Electron Microscopy ◽  
Thin Films ◽  
Scanning Electron Microscopy ◽  
Titanium Dioxide ◽  
Sol Gel ◽  
Titanium Butoxide ◽  
Before And After ◽  
Scanning Electron ◽  
Spin Coater

Titania or titanium dioxide (TiO2) thin film has been synthesized via sol-gel method with monoethanolamine (MEA) as a catalyst. The mixing of titanium butoxide as a precursor, ethanol as a solvent and MEA were stirred using magnetic stirrer under ambient temperature [. The TiO2solution prepared then was deposited on SiO2substrates using spin-coater and the coated films were annealed at 600°C. Finally, both before and after annealed TiO2thin films were characterized using Field Emission Scanning Electron Microscopy (FESEM). The obtained results show the different TiO2particles formation before and after annealed.

Optical Properties of Alq3/TiO2 BDR Structure Processed by Spin Coating Technique

MRS Advances ◽  
2019 ◽  
Vol 4 (11-12) ◽  
pp. 661-666
Author(s):  
L. Ajith DeSilva ◽  
Sarahn Nazaret ◽  
A. G. U. Perera ◽  
T. M. W. J. Bandara
Keyword(s):  
Thin Films ◽  
Titanium Dioxide ◽  
Optical Properties ◽  
Band Gap ◽  
Spin Coating ◽  
Light Emission ◽  
Wide Band ◽  
Bragg Reflector ◽  
Distributed Bragg Reflector ◽  
Pl Quenching

ABSTRACTOne-dimensional hybrid Distributed Bragg Reflector (DBR) is constructed using Tris (8-hydroxy) quinoline aluminum (Alq3) molecules and Titanium dioxide (TiO2) nanoparticles via spin coating process. Light emission from thin films of low molecular weight organic semiconductor of Alq3 is dominated by excitons. This material has been widely used as a superior emitter for organic light emitting diodes. Titanium dioxide (TiO2) is an inorganic semiconductor with a high band gap. Photoluminescence (PL) of thin films of Alq3 showed a broad PL peak at 530 nm. In DBR structures, PL quenching is observed but there is no shift in the PL peak of the Alq3. The PL quenching is tentatively attributed to energy transfer via sensitization to wide band gap TiO2 layers. A simple excitonic model is suggested to explain the observation. Fabrication process and optical properties of the structure are presented.

The effects of intrinsic defects on the structural and optical properties of ZnO thin film prepared via a sol-gel method

2019 ◽  
Vol 6 (11) ◽  
pp. 115901 ◽  
Author(s):  
Fucheng Yu ◽  
Tianyun Song ◽  
Bolong Wang ◽  
Boyu Xu ◽  
Haishan Li ◽  
...  
Keyword(s):  
Thin Film ◽  
Optical Properties ◽  
Sol Gel ◽  
Zno Thin Film ◽  
Structural And Optical Properties ◽  
Intrinsic Defects ◽  
Gel Method ◽  
Sol Gel Method

Optical properties of SiO2–TiO2 thin film waveguides obtained by the sol–gel method and their applications for sensing purposes

2005 ◽  
Vol 27 (9) ◽  
pp. 1501-1505 ◽  
Author(s):  
Anna Łukowiak ◽  
Rafal Dylewicz ◽  
Sergiusz Patela ◽  
Wieslaw Stręk ◽  
Krzysztof Maruszewski
Keyword(s):  
Thin Film ◽  
Optical Properties ◽  
Tio2 Thin Film ◽  
Sol Gel ◽  
Gel Method ◽  
Sol Gel Method ◽  
Thin Film Waveguides

Effect of ZnO on a Superhydrophilic Self-Cleaning Properties of TiO2/SiO2 Thin Film on Glass Slide Substrate

2015 ◽  
Vol 1131 ◽  
pp. 237-241 ◽  
Author(s):  
Akkarat Wongkaew ◽  
Chanida Soontornkallapaki ◽  
Naritsara Amhae ◽  
Wichet Lamai
Keyword(s):  
Thin Film ◽  
Contact Angle ◽  
Visible Light ◽  
Band Gap ◽  
Sol Gel ◽  
Dip Coating ◽  
Band Gap Energy ◽  
Gap Energy ◽  
Coating Method ◽  
Dip Coating Method

This work aims to study the effect of ZnO containing in TiO2/SiO2 film on the superhydrophilic property after exposed to different types of light. The metal solutions were prepared by sol-gel technique and the film was deposited on glass slides by dip coating method. The parameter studied was the amount of ZnO in the TiO2/SiO2 film. The contents of ZnO were 5-20% weight (increased by 5%). The amount of TiO2 was constant at 30% weight. The obtained films were analyzed for their roughness. The results indicated that film roughness changed according to the ZnO contents. With 5%ZnO in the thin film, the roughness was 0.726 nm while 20%ZnO obtained the roughness of 2.128 nm. UV-Vis spectrophotometer was used for measuring of transmittance of films. At wavelength of 550 nm, the transmittances of each film were greater than 90%. Band gap energy of each film was calculated from the transmittance data. It was found that the average band gap energy of the films was 2.47 eV. Then, the films contained various amount of ZnO were grouped into 2 sets. The first set was exposed to visible light while the other set was exposed to UV. The duration of exposure was 5 hr. Both sets of films after exposed to any light were kept in a black box controlled relative humidity of 85%. Each film was measured contact angle every day. It was found that the 30%TiO2/5%Zn/SiO2 film exposed to visible light showed the best superhydrophilic property. The contact angle was about 0-5° within 3 days. This may due to the reduction of band gap energy in the presence of ZnO in TiO2/SiO2 films to 2.41 eV and the roughness of the film.

Sign in / Sign up

Export Citation Format

Share Document