UPGRADE FOR THE CBELSA/TAPS EXPERIMENT AT ELSA FOR η AND η′ DECAYS

2010 ◽  
Vol 19 (05n06) ◽  
pp. 938-945 ◽  
Author(s):  
◽  
MICHAEL LANG

The CBELSA/TAPS experiment is a set up installed at the accelerator facility ELSA in Bonn. It is used to measure cross sections of hadronic reactions by observing final state particles. The set up is well suited for the identification of neutral particles such as neutrons and photons (e.g. from π0 decay). It is planed to access the major part of η and η′ photo production and decays as also strangeness. This requires a neutral trigger capability for the detector set up and a tracking detector for charged particles.

2020 ◽  
Vol 56 (9) ◽  
Author(s):  
Gábor Balassa ◽  
György Wolf

Abstract In this work, we extended our statistical model with charmed and bottomed hadrons, and fit the quark creational probabilities for the heavy quarks, using low energy inclusive charmonium and bottomonium data. With the finalized fit for all the relevant types of quarks (up, down, strange, charm, bottom) at the energy range from a few GeV up to a few tens of GeV’s, the model is now considered complete. Some examples are also given for proton–proton, pion–proton, and proton–antiproton collisions with charmonium, bottomonium, and open charm hadrons in the final state.


2020 ◽  
Vol 2020 (9) ◽  
Author(s):  
Markus A. Ebert ◽  
Bernhard Mistlberger ◽  
Gherardo Vita

Abstract We demonstrate how to efficiently expand cross sections for color-singlet production at hadron colliders around the kinematic limit of all final state radiation being collinear to one of the incoming hadrons. This expansion is systematically improvable and applicable to a large class of physical observables. We demonstrate the viability of this technique by obtaining the first two terms in the collinear expansion of the rapidity distribution of the gluon fusion Higgs boson production cross section at next-to-next-to leading order (NNLO) in QCD perturbation theory. Furthermore, we illustrate how this technique is used to extract universal building blocks of scattering cross section like the N-jettiness and transverse momentum beam function at NNLO.


2021 ◽  
Vol 2021 (3) ◽  
Author(s):  
Vincenzo Cirigliano ◽  
Kaori Fuyuto ◽  
Christopher Lee ◽  
Emanuele Mereghetti ◽  
Bin Yan

Abstract We present a comprehensive analysis of the potential sensitivity of the Electron-Ion Collider (EIC) to charged lepton flavor violation (CLFV) in the channel ep→τX, within the model-independent framework of the Standard Model Effective Field Theory (SMEFT). We compute the relevant cross sections to leading order in QCD and electroweak corrections and perform simulations of signal and SM background events in various τ decay channels, suggesting simple cuts to enhance the associated estimated efficiencies. To assess the discovery potential of the EIC in τ-e transitions, we study the sensitivity of other probes of this physics across a broad range of energy scales, from pp→eτX at the Large Hadron Collider to decays of B mesons and τ leptons, such as τ→eγ, τ→eℓ+ℓ−, and crucially the hadronic modes τ→eY with Y∈π, K, ππ, Kπ, …. We find that electroweak dipole and four-fermion semi-leptonic operators involving light quarks are already strongly constrained by τ decays, while operators involving the c and b quarks present more promising discovery potential for the EIC. An analysis of three models of leptoquarks confirms the expectations based on the SMEFT results. We also identify future directions needed to maximize the reach of the EIC in CLFV searches: these include an optimization of the τ tagger in hadronic channels, an exploration of background suppression through tagging b and c jets in the final state, and a global fit by turning on all SMEFT couplings, which will likely reveal new discovery windows for the EIC.


2020 ◽  
Vol 174 ◽  
pp. 01048
Author(s):  
Elena Kassikhina ◽  
Vladimir Pershin ◽  
Nina Rusakova

The existing structures of the steel sinking headgear and permanent headframe do not meet the requirements of resource saving (metal consumption and manpower input at installation), and the present methods of the headframe designing do not fully reflect recent possibilities of applying of the advanced information technologies. Technical level of the modern software makes it possible for designers to set up multiple numerical experiments to create a computer simulation that allows solving the problem without field and laboratory experiments, and therefore without special costs. In this regard, a mathematical simulation has been developed and based on it, software to select cross-sections of multi- purpose steel headframe elements and to calculate proper weight of its metal structures depending on the characteristics and hoisting equipment. A headframe drawing is displayed, as the results of the software work, including list of elements, obtained optimal hoisting equipment in accordance with the initial data. The software allows speeding up graphic work and reducing manpower input on calculations and paper work. The software allows developing a three-dimensional image of the structure and its functional blocks, based on the obtained initial parameters, as well as developing control software for units with numerical control (NC) in order to manufacture multi-purpose headframes.


Author(s):  
Ane Bang-Kittilsen ◽  
Terje Midtbø

AbstractGeologists struggle to communicate the uncertainty that arise when mapping and interpreting the geological subsurface. Today, open data sharing policies make new value of geological information possible for a broader user group of non-experts. It is crucial to develop standard methods for visualizing uncertainty to increase the usability of geological information. In this study, a web experiment was set up to analyze whether and how different design choices influence the sense of uncertainty. Also, questions about the intuitiveness of symbols were asked. Two-hundred ten participants from different countries completed the experiment, both experts and non-experts in geology. Traditional visualization techniques in geology, like dashed lines, dotted lines and question mark, were tested. In addition, other visualizations were tested, such as hatched area and variations of symbol size, zoom levels and reference information. The results show that design choices have an impact on the participants’ assessment of uncertainty. The experts inquire about crucial information if it is not present. The results also suggest that when visualizing uncertainty, all the elements in the representation, and specifically the line and area symbols that delineate and colour the features, must work together to make the right impression.


2014 ◽  
Vol 35 ◽  
pp. 1460440
Author(s):  
ALBERTO LUSIANI

We report recent measurements on τ leptons obtained by the BABAR collaboration using the entire recorded sample of electron-positron collisions at and around the Υ(4S) (about 470fb-1). The events were recorded at the PEP-II asymmetric collider at the SLAC National Accelerator Laboratory. The measurements include high multiplicity τ decay branching fractions with 3 or 5 charged particles in the final state, a search for the second class current the τ decay τ → πη′ν, τ branching fractions into final states containing two KS mesons, [Formula: see text], with h = π, K, and preliminary measurements of hadronic spectra of τ decays with three hadrons (τ- → h-h+h-ντ decays, where h = π, K). The results improve the experimental knowledge of the τ lepton properties and can be used to improve the precision tests of the Standard Model.


2015 ◽  
Vol 77 (32) ◽  
Author(s):  
Rabiatuladawiyah Danial ◽  
Luqman Chuah Abdullah ◽  
Mohsen Nourouzi Mobarekeh ◽  
Shafreeza Sobri ◽  
Nordayana Mohd Adnan

This study was intended to compare the performance of electrocoagulation process using aluminium and iron electrodes for glyphosate removal in aqueous solution. The effects of initial glyphosate concentration, electrocoagulation time and distance between electrodes, were discussed in detail. An electrocoagulation tank of 500mL with two metal plates electrodes, same in dimensions and metal types, was set up to perform batch mode laboratory experiment and the glyphosate in white powder was first diluted with deionized water. Production of metal cations showed an ability to neutralize negatively charged particles, which then encouraged to bind together to form aggregates of flocs composed of a combination of glyphosate and metal hydroxide. Compared with iron electrodes, aluminium electrodes were more effective for glyphosate removal, with a removal efficiency of over than 80%. This study revealed that electrocoagulation process using aluminium electrodes is reliable, especially designed for initial concentration 100 mg/L, electrocoagulation time 50 min, and distance between electrodes 6 cm. Finally, it can be concluded that electrocoagulation process using aluminium electrodes is efficient for glyphosate removal from aqueous environments.


2007 ◽  
Vol 333 ◽  
pp. 227-230
Author(s):  
Valeria Cannillo ◽  
Luca Lusvarghi ◽  
Tiziano Manfredini ◽  
M. Montorsi ◽  
Cristina Siligardi ◽  
...  

The present work was focused on glass-alumina functionally graded materials. The samples, produced by plasma spraying, were built as multi-layered systems by depositing several layers of slightly different composition, since their alumina and glass content was progressively changed. After fabricating the graded materials, several, proper characterization techniques were set up to investigate the gradient in composition, microstructure and related performances. A particular attention was paid to the observation of the graded cross sections by scanning electron microscopy, which allowed to visualize directly the graded microstructural changes. The scanning electron microscopy (SEM) inspection was integrated with accurate mechanical measurements, such as systematic depth-sensing Vickers microindentation tests performed on the graded cross sections.


2020 ◽  
Vol 15 ◽  
pp. 249
Author(s):  
V. Ch. Chasioti ◽  
T. S. Kosmas ◽  
P. Divari

Inelastic neutrino-nucleus reaction cross sections are studied focusing on the neutral current processes. Particularly, we investigate the angular and initial neutrino-energy dependence of the differential and integrated cross sections for low and intermediate energies of the incoming neutrino (or antineutrino). Contributions coming from both, the vector and axial-vector components of the corresponding hadronic currents have been included. The initial and final state nuclear wave-functions have been calculated in the context of the Quasi-particle Random Phase Approximation (QRPA) tested on the reproducibility of the low-lying energy spectrum (up to about 5 MeV) of the studied nuclei. The results presented here refer to the nuclear isotopes 16O and 98Mo. As it is well known, O plays a significant role in supernova evolution phenomena and Mo is used as a target in the MOON neutrino experiment at Japan.


Sign in / Sign up

Export Citation Format

Share Document