PEPTIDE NANOFILAMENTS USED FOR REPLICA-MOLDING: A COMBINATION OF "BOTTOM-UP" AND "TOP-DOWN"

2007 ◽  
Vol 14 (02) ◽  
pp. 301-307 ◽  
Author(s):  
YUZHAO TANG ◽  
XIAODONG ZHANG ◽  
JIELIN SUN ◽  
JUN HU ◽  
FENG ZHANG ◽  
...  
Keyword(s):  
Nanometer Scale ◽  
Top Down ◽  
Bottom Up ◽  
Polymeric Surfaces ◽  
Replica Molding ◽  
Force Microscopy ◽  
Self Assembling ◽  
Atomic Force ◽  
New Applications

A novel nanofabrication method that combines both "bottom-up" (template-assisted peptide self-assembling) and "top-down" (replica molding) techniques is introduced. A designer peptide, GAV-9 (NH2-VGGAVVAGV-CONH2), can epitaxially self-assemble into nanofilaments on the surface of mica, which is further used as the diversified masters for the application of replica molding. With in situ atomic force microscopy monitoring, several typical masters are fabricated by peptide self-assembling on the surface of mica. These masters can be easily molded into hard poly(dimethylsiloxane) surfaces, and then further replica-molded into polyurethane surfaces. The polymeric surfaces with regular 1D and 2D patterns on the nanometer scale are expected to have new applications in nanostructure's fabrication.

scholarly journals Surface Sensitivity Effects With Local Probe Scanning Auger-Scanning Electron Microscopy

1999 ◽  
Vol 589 ◽  
Author(s):  
D. T. L. Van Agterveld ◽  
G. Palasantzas ◽  
J.Th.M. De Hosson
Keyword(s):  
Electron Microscopy ◽  
High Vacuum ◽  
Ultra High Vacuum ◽  
Precipitate Size ◽  
Nanometer Scale ◽  
Force Microscopy ◽  
Surface Sensitivity ◽  
Atomic Force ◽  
Microscopy Analysis

AbstractUltra-high-vacuum segregation studies on in-situ fractured Cu-Sb alloys were performed in terms of nanometer scale scanning Auger/Electron microscopy. S contamination leads to the formation of Cu2S precipitates which, upon removal due to fracture, expose pits with morphology that depends on the precipitate size and shape. Local variations of S and Sb distributions inside the pits were correlated to local surface orientations as Atomic Force Microscopy analysis revealed.

In Situ Electrochemical Scanning Probe Microscopy of Lithium Battery Cathode Materials: Vanadium Pentoxide (V2O5)

2002 ◽  
Vol 756 ◽  
Author(s):  
Joseph W. Bullard ◽  
Richard L. Smith
Keyword(s):  
Scanning Probe Microscopy ◽  
Lithium Battery ◽  
Structural Evolution ◽  
Scanning Probe ◽  
Nanometer Scale ◽  
Force Microscopy ◽  
Atomic Force ◽  
Electrochemical Cycling ◽  
Pit Nucleation

ABSTRACTAtomic force microscopy was used to characterize the structural evolution of the V2O5(001) surface during the electrochemical cycling of lithium. With Li insertion, nanometer-scale pits develop at the V2O5(001) surface. The pits first appear as the composition of the crystal approaches Li0.0006V2O5. Pit nucleation and growth continue through further discharge, resulting in a micro-porous (001) surface morphology. During subsequent Li extraction, cracks develop along the V2O5 <010> axis. Surface regions in the vicinity of these cracks “swell” during ensuing lithiation reactions, suggesting that the cracks locally facilitate Li uptake.

scholarly journals Ultrafine metal-polymer catalysts based on polyconjugated systems for Fisher–Tropsch synthesis

2020 ◽  
Vol 92 (6) ◽  
pp. 977-984
Author(s):  
Mayya V. Kulikova ◽  
Albert B. Kulikov ◽  
Alexey E. Kuz’min ◽  
Anton L. Maximov
Keyword(s):  
Tropsch Synthesis ◽  
X Ray Diffraction ◽  
Fischer Tropsch ◽  
Force Microscopy ◽  
Composite Catalysts ◽  
Fe Catalyst ◽  
Atomic Force ◽  
And Function ◽  
Metal Polymer

AbstractFor previously studied Fischer–Tropsch nanosized Fe catalyst slurries, polymer compounds with or without polyconjugating structures are used as precursors to form the catalyst nanomatrix in situ, and several catalytic experiments and X-ray diffraction and atomic force microscopy measurements are performed. The important and different roles of the paraffin molecules in the slurry medium in the formation and function of composite catalysts with the two types of aforementioned polymer matrices are revealed. In the case of the polyconjugated polymers, the alkanes in the medium are “weakly” coordinated with the metal-polymer composites, which does not affect the effectiveness of the polyconjugated polymers. Otherwise, alkane molecules form a “tight” surface layer around the composite particles, which create transport complications for the reagents and products of Fischer-Tropsch synthesis and, in some cases, can change the course of the in situ catalyst formation.

scholarly journals Dynamic friction energy dissipation and enhanced contrast in high frequency bimodal atomic force microscopy

Friction ◽  
2021 ◽  
Author(s):  
Xinfeng Tan ◽  
Dan Guo ◽  
Jianbin Luo
Keyword(s):  
Atomic Force Microscopy ◽  
Energy Dissipation ◽  
Contact Friction ◽  
Measuring Instruments ◽  
Dynamic Friction ◽  
Contact Mode ◽  
Force Microscopy ◽  
Atomic Force ◽  
Friction Energy ◽  
New Applications

AbstractDynamic friction occurs not only between two contact objects sliding against each other, but also between two relative sliding surfaces several nanometres apart. Many emerging micro- and nano-mechanical systems that promise new applications in sensors or information technology may suffer or benefit from noncontact friction. Herein we demonstrate the distance-dependent friction energy dissipation between the tip and the heterogeneous polymers by the bimodal atomic force microscopy (AFM) method driving the second order flexural and the first order torsional vibration simultaneously. The pull-in problem caused by the attractive force is avoided, and the friction dissipation can be imaged near the surface. The friction dissipation coefficient concept is proposed and three different contact states are determined from phase and energy dissipation curves. Image contrast is enhanced in the intermediate setpoint region. The work offers an effective method for directly detecting the friction dissipation and high resolution images, which overcomes the disadvantages of existing methods such as contact mode AFM or other contact friction and wear measuring instruments.

Atomic force microscopy of in situ deformed nickel thin films

1999 ◽  
Vol 353 (1-2) ◽  
pp. 194-200 ◽  
Author(s):  
C. Coupeau ◽  
J.F. Naud ◽  
F. Cleymand ◽  
P. Goudeau ◽  
J. Grilhé
Keyword(s):  
Thin Films ◽  
Atomic Force Microscopy ◽  
Force Microscopy ◽  
Nickel Thin Films ◽  
Atomic Force

scholarly journals Degradation Mechanism of Porous Metal-Organic Frameworks by In Situ Atomic Force Microscopy

Nanomaterials ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 722
Author(s):  
Ioanna Christodoulou ◽  
Tom Bourguignon ◽  
Xue Li ◽  
Gilles Patriarche ◽  
Christian Serre ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Degradation Mechanism ◽  
Metal Organic Frameworks ◽  
Porous Metal ◽  
Force Microscopy ◽  
Atomic Force ◽  
Metal Organic ◽  
The Media ◽  
Ph Conditions

In recent years, Metal-Organic Frameworks (MOFs) have attracted a growing interest for biomedical applications. The design of MOFs should take into consideration the subtle balance between stability and biodegradability. However, only few studies have focused on the MOFs’ stability in physiological media and their degradation mechanism. Here, we investigate the degradation of mesoporous iron (III) carboxylate MOFs, which are among the most employed MOFs for drug delivery, by a set of complementary methods. In situ AFM allowed monitoring with nanoscale resolution the morphological, dimensional, and mechanical properties of a series of MOFs in phosphate buffer saline and in real time. Depending on the synthetic route, the external surface presented either well-defined crystalline planes or initial defects, which influenced the degradation mechanism of the particles. Moreover, MOF stability was investigated under different pH conditions, from acidic to neutral. Interestingly, despite pronounced erosion, especially at neutral pH, the dimensions of the crystals were unchanged. It was revealed that the external surfaces of MOF crystals rapidly respond to in situ changes of the composition of the media they are in contact with. These observations are of a crucial importance for the design of nanosized MOFs for drug delivery applications.

In Situ Characterization of the Mechanical Behavior of Gecko's Spatulae by Atomic Force Microscopy

2013 ◽  
Vol 22 ◽  
pp. 85-93
Author(s):  
Shuang Yi Liu ◽  
Min Min Tang ◽  
Ai Kah Soh ◽  
Liang Hong
Keyword(s):  
Mechanical Behavior ◽  
Hierarchical Level ◽  
Intrinsic Properties ◽  
In Situ Characterization ◽  
Force Microscopy ◽  
Atomic Force ◽  
Theoretical Predictions ◽  
Multi Mode

In-situ characterization of the mechanical behavior of geckos spatula has been carried out in detail using multi-mode AFM system. Combining successful application of a novel AFM mode, i.e. Harmonix microscopy, the more detail elastic properties of spatula is brought to light. The results obtained show the variation of the mechanical properties on the hierarchical level of a seta, even for the different locations, pad and stalk of the spatula. A model, which has been validated using the existing experimental data and phenomena as well as theoretical predictions for geckos adhesion, crawling and self-cleaning of spatulae, is proposed in this paper. Through contrast of adhesive and craw ability of the gecko on the surfaces with different surface roughness, and measurement of the surface adhesive behaviors of Teflon, the most effective adhesion of the gecko is more dependent on the intrinsic properties of the surface which is adhered.

Sign in / Sign up

Export Citation Format

Share Document