STUDY ON PERFORMANCE-BASED SEISMIC DESIGN OF SHANGHAI WORLD FINANCIAL CENTER TOWER

2009 ◽  
Vol 03 (04) ◽  
pp. 273-284 ◽  
Author(s):  
XILIN LU ◽  
JIEJIANG ZHU ◽  
YUN ZOU
Keyword(s):  
Seismic Performance ◽  
Seismic Design ◽  
Time History ◽  
Shaking Table ◽  
Nonlinear Time History Analysis ◽  
Distribution Analysis ◽  
Element Analysis ◽  
Analytical Studies ◽  
Performance Based Seismic Design ◽  
Financial Center

The height of 101-storey Shanghai World Financial Center Tower is 492 m above ground. According to the philosophy of performance-based seismic design, the seismic performance design objectives and corresponding parameters were proposed for the structure under various seismic actions from frequent to rare earthquake levels. Analytical studies including refined finite element analysis, nonlinear time-history analysis, and stress distribution analysis on the important joint have been conducted to evaluate the structural seismic performance. Along with the analytical studies, shaking table model test and the important joint tests have been carried on in order to verify the accuracies of the analytical results as well as to complement the analytical studies. The results obtained from the studies demonstrate that the structural system meets the performance-based design objectives presented in the paper.

Direct Displacement Procedure for Performance-Based Seismic Design of Mid-Rise Wood-Framed Structures

2009 ◽  
Vol 25 (3) ◽  
pp. 583-605 ◽  
Author(s):  
Wei Chiang Pang ◽  
David V. Rosowsky
Keyword(s):  
Seismic Design ◽  
Response Spectrum ◽  
Design Procedure ◽  
Time History ◽  
Time History Analysis ◽  
Nonlinear Time History Analysis ◽  
Framed Structures ◽  
History Analysis ◽  
Performance Based Seismic Design ◽  
Nonlinear Time History

This paper presents a direct displacement design (DDD) procedure that can be used for seismic design of multistory wood-framed structures. The proposed procedure is applicable to any pure shear deforming system. The design procedure is a promising design tool for performance-based seismic design since it allows consideration of multiple performance objectives (e.g., damage limitation, safety requirements) without requiring the engineer to perform a complex finite element or nonlinear time-history analysis of the complete structure. A simple procedure based on normalized modal analysis is used to convert the code-specified acceleration response spectrum into a set of interstory drift spectra. These spectra can be used to determine the minimum stiffness required for each floor based on the drift limit requirements. Specific shear walls can then be directly selected from a database of backbone curves. The procedure is illustrated on the design of two three-story ATC-63 archetype buildings, and the results are validated using nonlinear time-history analysis.

Seismic Performance of Self-Centering UHPC Retainers Applied to Medium-Small Span Concrete Bridges

2019 ◽  
Author(s):  
Wenpeng Wu ◽  
Shiguo Long ◽  
Huihui Li
Keyword(s):  
Seismic Performance ◽  
Seismic Design ◽  
High Performance ◽  
Load Transfer ◽  
High Performance Concrete ◽  
Design Method ◽  
Structural Characteristics ◽  
Time History ◽  
Nonlinear Time History Analysis ◽  
Seismic Resistant

<p>Seismic resistant retainer is an important component for seismic design of the medium‐small span bridges. However, it’s difficult for the bridge engineers to design a reasonable transverse retainer due to deficiency of design detail in most of current seismic design specifications. Therefore, this paper proposed a prestressed prefabricated concrete retainer that utilize the ultra‐high performance concrete (UHPC). Firstly, the structural characteristics and the seismic design method of the new proposed retainer is illustrated. The OpenSEES model of the case‐study bridge were simulated by considering three different types of seismic resistant retainers. A total of ten high intensity ground motions were selected to conduct the nonlinear time history analysis (NTHA). Subsequently, to investigate the seismic performance of the proposed UHPC retainer, this paper performs the comparative study of seismic responses for different bridge components. It is concluded that, the proposed retainer can provide excellent displacement capacity and help to reduce the seismic damage of bridge piers significantly. In addition, the new retainer has strong ability to keep self‐centering to help the bridge reducing the residual displacement of superstructure under strong seismic events. The proposed UHPC retainer is applicable to the rapid prestressed prefabricated construction process and has a clear load transfer mode under earthquake actions. Therefore, it is a good candidate to the multi‐level performance‐based seismic design of the medium‐small span bridges.</p>

Evaluating the Performance of Urban Water Pipelines Using Hybrid HFA-FEA Approach

2013 ◽  
Author(s):  
Seyed Kazem Sadat Shokouhi ◽  
Azam Dolatshah ◽  
Hamid Reza Vosoughifar ◽  
Yousef Rahnavard
Keyword(s):  
Seismic Performance ◽  
Time History ◽  
Vital Role ◽  
Nonlinear Time History Analysis ◽  
Piping System ◽  
Urban Water ◽  
Element Analysis ◽  
Significant Difference ◽  
Water Pipelines ◽  
Recent Earthquakes

Seismic behavior of the urban water pipelines has been considered due to its vital role, and also experiences of recent earthquakes which demonstrate poor seismic performance of mentioned pipelines. Previous experiences such as Bam (2003), Chile (2010) and Japan (2011) earthquakes indicated that urban water pipelines were out of service after earthquake and numerous problems were apparent on the post-disaster management. In this research, the water pipeline network of a zone in Tehran city was selected as a case study. The Hydraulic Failure Analysis (HFA) of the water pipelines in the proposed zone was carried out and failure potential points of the pipelines were determined. In addition, these points were investigated using orifice theory of leakage problem. Then, the proposed network was modeled using Finite Element Analysis (FEA). Also, nonlinear time-history analysis has been undertaken using three seismic scaled records of different earthquakes. Eventually, a statistical test demonstrated that there is a significant difference in the seismic performance of piping system before and after an earthquake.

Probabilistic Peak Displacement Analysis of Bridge Structures with P-Δ Effect

2013 ◽  
Vol 405-408 ◽  
pp. 1674-1677
Author(s):  
Bo Yu ◽  
Di Liu ◽  
Lu Feng Yang
Keyword(s):  
Time History ◽  
Dynamic Responses ◽  
Nonlinear Time History Analysis ◽  
Bridge Structure ◽  
Vibration Period ◽  
Peak Displacement ◽  
Sdof System ◽  
Bridge Structures ◽  
Performance Based Seismic Design ◽  
Nonlinear Time History

Peak displacement is one of the most important parameters for the performance based seismic design of bridge structure, while the peak displacement is often significantly impacted by the P-Δ effect. In this study, the influence of the P-Δ effect on the statistics of peak displacement of bridge structure was quantificationally investigated based on a series of nonlinear time-history analysis. The bridge structure was idealized as the single degree of freedom (SDOF) system and the hysteretic behaviour was represented by the improved Bouc-Wen model. The statistic analysis was implemented based on the inelastic dynamic responses of the SDOF system under 69 selected earthquake records. The results show that the P-Δ effect has significant impact on the mean and dispersion of peak displacement of bridge structures, especially if the normalized yield strength and the natural vibration period are small.

Effect of bidirectional excitation on seismic performance of regular RC frame buildings designed for modern codes

2021 ◽  
pp. 875529302110478
Author(s):  
Payal Gwalani ◽  
Yogendra Singh ◽  
Humberto Varum
Keyword(s):  
Seismic Performance ◽  
Time History ◽  
Nonlinear Time History Analysis ◽  
Inelastic Behavior ◽  
Moment Frame ◽  
Frame Buildings ◽  
Bidirectional Excitation ◽  
Rc Frame Buildings ◽  
Nonlinear Time History ◽  
Hinge Model

The existing practice to estimate seismic performance of a regular building is to carry out nonlinear time history analysis using two-dimensional models subjected to unidirectional excitations, even though the multiple components of ground motion can affect the seismic response, significantly. During seismic shaking, columns are invariably subjected to bending in two orthogonal vertical planes, which leads to a complex interaction of axial force with the biaxial bending moments. This article compares the seismic performance of regular and symmetric RC moment frame buildings for unidirectional and bidirectional ground motions. The buildings are designed and detailed according to the Indian codes, which are at par with the other modern seismic codes. A fiber-hinge model, duly calibrated with the biaxial experimental results, is utilized to simulate the inelastic behavior of columns under bidirectional bending. A comparison of the estimated seismic collapse capacity is presented, illustrating the importance of considering the bidirectional effects. The results from fragility analysis indicate that the failure probabilities of buildings under the bidirectional excitation are significantly higher as compared to those obtained under the unidirectional excitation.

scholarly journals Analysis of the Effects of Soil on the Seismic Energy Responses of an Equipment-Structure System via Substructure Shaking Table Testing

2019 ◽  
Vol 2019 ◽  
pp. 1-11 ◽  
Author(s):  
Lanfang Luo ◽  
Nan Jiang ◽  
Jihong Bi
Keyword(s):  
Seismic Design ◽  
Seismic Energy ◽  
Shaking Table ◽  
Input Energy ◽  
Test Results ◽  
Element Analysis ◽  
Testing Method ◽  
Shaking Table Testing ◽  
Soil Effects ◽  
Substructure Approach

This study investigated the real-time substructure shaking table testing (RTSSTT) of an equipment-structure-soil (ESS) system and the effects of soil on the seismic energy responses of the equipment-structure (ES) subsystem. First, the branch modal substructure approach was employed to derive the formulas needed for the RTSSTT of the ESS system. Then, individual equations for calculating the energy responses of the equipment and the structure were provided. The ES subsystem was adopted as the experimental substructure, whereas the reduced soil model was treated as the numerical substructure when the RTSSTT was performed on the ESS system. The effectiveness of the proposed testing method was demonstrated by comparing the test results with those of the integrated finite element analysis. The energy responses of the ES subsystem in the case of rigid ground (i.e., the ES system) were compared with those considering the effects of soil (i.e., the ESS system). The input energy responses of the ES subsystem were found to decrease significantly after taking the effects of soil into account. Differences due to the soil effects should be considered in the seismic design for the ES system.

Strengthening Research in the Longitudinal Frames of Prefabricated Structures with Viscous Dampers

2013 ◽  
Vol 671-674 ◽  
pp. 782-785
Author(s):  
Bin He ◽  
Jin Lai Pang ◽  
Cheng Qing Liu
Keyword(s):  
Seismic Performance ◽  
Pushover Analysis ◽  
Vertical Direction ◽  
Time History ◽  
Nonlinear Time History Analysis ◽  
Viscous Dampers ◽  
Existing Building ◽  
Concrete Frame ◽  
Uniform Drift ◽  
Nonlinear Time History

For the lack of research in the longitudinal frame of prefabricated structure for its weak lateral stiffness, pushover analysis is conducted to evaluate the seismic performance of a fabricated concrete frame. Based on case study, the strengthening strategies with viscous dampers are analyzed. In view of the undesirable drift distribution and failure mode in the existing building, it is believed that arrangement of dampers should be designed to attain a uniform drift distribution. Based on the nonlinear time history analysis method, the strategy of damper allocation in vertical direction of the structure is investigated .Results indicate that a proper design might be attained based on the property of existing system, leading to a uniform drift distribution and better seismic performance.

Shaking Table Test for Base-Isolated Nuclear Island Structure Model

2017 ◽  
Author(s):  
Yang Jie ◽  
Li ShaoPing ◽  
Yuan Fang ◽  
Xia ZuFeng ◽  
Huang XiaoLin
Keyword(s):  
Shaking Table Test ◽  
Three Dimensional ◽  
Time History ◽  
Response Spectra ◽  
Shaking Table ◽  
Nonlinear Time History Analysis ◽  
Earthquake Simulation ◽  
Maximum Displacement ◽  
Island Structure ◽  
Reduced Scale

In this paper, the base-isolated design of Nuclear Island structure will be introduced, including the general requirement and the goal of the base-isolated design. Integrated assessment has been performed for the base-isolated design of Nuclear Island structure in the earthquake 0.6g. A series of nonlinear time-history analysis were performed to predict the maximum displacement and acceleration of the isolation layer, the maximum stress of the isolation units, and the floor response spectra of each story of the superstructure in the earthquake 0.6g, considering the realistic mechanical properties and the layout of the isolators. In order to provide realistic data to validate the numerical method, a reduced-scale earthquake simulation of base-isolated nuclear structure on a shaking table was carried out. The study was primarily focused on the response of superstructure and the isolation unit. The dynamic characteristic was examined, together with the vibration acceleration and displacement under different levels of seismic wave. The test results of a reduced-scale nuclear island model previously tested on a shaking table were compared with three-dimensional finite element simulation results. The results of this study provide the technical basis for the base-isolated design of Nuclear Island structure.

The Passive Control Seismic Strengthen about RC Frame Infilled Wall Structure

2013 ◽  
Vol 405-408 ◽  
pp. 1056-1062
Author(s):  
Qing Li Meng ◽  
Jun Chen ◽  
Chun Yu Chu
Keyword(s):  
Seismic Performance ◽  
Passive Control ◽  
Time History ◽  
Nonlinear Time History Analysis ◽  
Wall Structure ◽  
Rc Frame ◽  
Reinforced Concrete Frame ◽  
Direction Parallel ◽  
Plane Direction ◽  
Performance Target

In this paper, a four-storey reinforced concrete frame infilled wall structure does not meet the seismic perform target, based on the seismic behavior target of both frame and infilled wall, to carry out the study on the passive control seismic strengthen of RC infilled wall structure with attached dampers. First, two kinds of passive control strengthen schemes were put forward. Scheme 1: Dampers were installed in the in-plane direction parallel with all 1-storey infilled walls; Scheme 2: Dampers were installed in the in-plane direction parallel with all 1-storey and 2-storey infilled walls. Then to establish the two types of passive control seismic strengthen model in OpenSees, carry out the rare earthquake nonlinear time-history analysis under El Centro, Parkfield and San Fenando ground motions. Finally, in accordance with the seismic performance target quantization index of RC Frame infilled wall structure used as hospital, i.e. considering storey drift ratio limit and infilled wall damage, judge the scheme 2 can meets the seismic performance target.

Shaking Table Test on Unreinforced Stone Masonry Pagoda

2012 ◽  
Vol 166-169 ◽  
pp. 730-733 ◽  
Author(s):  
Fei Zhu ◽  
Feng Lai Wang ◽  
Xu Jie Sun ◽  
Y. Zhao
Keyword(s):  
Dynamic Behavior ◽  
Seismic Performance ◽  
Seismic Design ◽  
Shaking Table Test ◽  
Shaking Table ◽  
Cultural Value ◽  
Scale Model ◽  
Stone Masonry ◽  
Experimental Program ◽  
Ancient China

Unreinforced stone masonry pagodas have great cultural value and should be detailed investigation its mechanical properties. These buildings were not designed to resist earthquakes in ancient China, at least not in the way of current methods. The objectives of this research were to understand the dynamic behavior of unreinforced stone masonry pagoda and its seismic performance. To accomplish these, a 1/12 scale model of China Dinosaurs Pagoda was constructed and tested on shaking table. The octangle model height is 3.96m, with aspect ratio of height to width is 2.93, both parameters exceed the stipulated limit of Code for Seismic Design of Building. The model built with the stones and motars similar to the prototype materials and the arrangements. Its dynamic behavior and seismic performance were tested on the shaking table towards the free vibration and three earthquake waves. The experimental program adopted in the research is explained in this paper.

Sign in / Sign up

Export Citation Format

Share Document