scholarly journals Malachite Green Dye Removal Using the Seaweed Enteromorpha

2011 ◽  
Vol 8 (2) ◽  
pp. 649-656 ◽  
Author(s):  
R. Jayaraj ◽  
M. Chandra Mohan ◽  
P. Martin Deva Prasath ◽  
T. Hidhayathullah Khan
Keyword(s):  
Aqueous Solution ◽  
Malachite Green ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Model Parameters ◽  
Adsorption Method ◽  
Malachite Green Dye ◽  
Equilibrium Data ◽  
Pseudo Second Order

Malachite green adsorption from an aqueous solution onto activatedEnteromorphacarbon has been studied experimentally using batch adsorption method. Adsorption kinetics and equilibrium were investigated as a function of initial dye concentration, pH, contact time and adsorbent dosage. Kinetics studies indicated that the adsorption followed pseudo second order reaction. Equilibrium data was analyzed using Langmuir and Freundlich isotherm models. The adsorption capacity ofEnteromorphawas found to be 94.74%. On the basis of experimental results and the model parameters, it can be inferred that the carbonaceousEnteromorphais effective for the removal of malachite green from aqueous solution.

scholarly journals Batch Adsorption of Maxilon Red GRL from Aqueous Solution by Natural Sugarcane Stalks Powder

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Gamal Owes El-Sayed ◽  
Talaat Younis Mohammed ◽  
Ashraf Abd-Allah Salama
Keyword(s):  
Aqueous Solution ◽  
Dye Removal ◽  
Dye Adsorption ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Textile Dye ◽  
Initial Ph ◽  
Equilibrium Data ◽  
Pseudo Second Order

Sugarcane stalks powder was tested for its efficiency of removing a textile dye Maxilon Red GRL from aqueous solution. Different parameters affecting dye removal efficiency were studied. These parameters include contact time, initial dye concentration, adsorbent dose, ionic strength, pH, and temperature. Langmuir and Freundlich isotherm models were applied to the equilibrium data. The data fitted well with the Langmuir isotherm (). The maximum monolayer adsorption capacity () was found to be 20.96 mg/g at an initial pH of 7.2. The temperature variation study showed that dye adsorption is exothermic and spontaneous with increased randomness at the solid solution interface. The results indicated that sugarcane stalks could be an alternative for more costly adsorbents used for dye removal. The kinetic of the adsorption process followed the pseudo second-order kinetics model.

Equilibrium and Thermodynamic Studies on Biosorption of Malachite Green from Aqueous Solution by Fungal Biomass

2011 ◽  
Vol 148-149 ◽  
pp. 470-473
Author(s):  
Li Fang Zhang
Keyword(s):  
Aqueous Solution ◽  
Malachite Green ◽  
Fungal Biomass ◽  
Ph Value ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Thermodynamic Studies ◽  
Biosorption Process ◽  
Initial Ph ◽  
Equilibrium Data

The biosorption of Malachite Green from aqueous solution was investigated by using pretreated fungal biomass in a batch system. The effects of initial pH, NaCl concentration, initial dye concentration and temperature on dye biosorption were studied. The results showed that the pretreated fungal biomass exhibited higher dye removal at initial pH value of 5.0-6.0. The bosorption capacity was increased with the increasing temperature in studied temperature range. The Langmuir and Freundlich isotherm models were applied to experimental equilibrium data and the Langmuir model better described the equilibrium dye uptake than the Freundlich model. Thermodynamic studies revealed that the biosorption process was successful, spontaneous and endothermic in nature.

scholarly journals Adsorption of Methylene Blue from aqueous solution using Senegal River Typha australis

2020 ◽  
Vol 10 (1) ◽  
pp. 22-32
Author(s):  
Abdoulaye Demba N'diaye ◽  
Youcef Aoulad El Hadj Ali ◽  
Mohamed Abdallahi Bollahi ◽  
Mostafa Stitou ◽  
Mohamed Kankou ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Low Cost ◽  
Activation Parameters ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Senegal River ◽  
Typha Australis ◽  
Equilibrium Data

In this work, batch adsorption experiments were carried out for the removal of Methylene Blue (MB) from aqueous solutions using Typha australis leaf as a low cost adsorbent. The effects of some variables governing the efficiency of the process such as adsorbent mass, pH, ionic strength, contact time and temperature were investigated. The adsorption kinetic data were analyzed using the Pseudo First Order (PFO) and Pseudo Second Order (PSO) models. The experimental equilibrium data were analyzed using Langmuir and Freundlich isotherm models. The results show that the PSO model is the best for describing the adsorption of MB by Typha australis for all initial MB concentrations. The equilibrium data fitted well with the Langmuir model with the monolayer adsorption capacity for MB-Typha australis leaf system was of 103.12 mg g-1. The values of activation parameters such as free energy (ΔG°), enthalpy (ΔH°) and entropy (ΔS°) were also determined as - 4.44 kJ mol−1, 55.13 kJ mol−1 and 203.21 J mol−1 K−1, respectively. The thermodynamics parameters of MB-Typha australis system indicate spontaneous and endothermic process. These results indicate that the Typha australis leaf can be feasibly employed for the eradication of MB from aqueous solution.

scholarly journals Removal of Copper (II) Ions from Aqueous Solutions by Adsorption with Low Cost Acid Activated Cynodon Dactylon Carbon

2011 ◽  
Vol 8 (s1) ◽  
pp. S377-S391 ◽  
Author(s):  
U. Gayathri ◽  
B. R. Venkatraman ◽  
S. Arivoli
Keyword(s):  
Aqueous Solution ◽  
Cynodon Dactylon ◽  
Low Cost ◽  
Copper Ion ◽  
Freundlich Isotherm ◽  
Experimental Results ◽  
Ion Concentration ◽  
Isotherm Models ◽  
Model Parameters ◽  
Equilibrium Data

The main purpose of this work was to exploit low cost and efficient sorbents for the removal of copper from aqueous solution usingCynodon dactyloncarbon. It was observed from the experimental results that almost 90-100% copper can be removed from the aqueous solution. Adsorption kinetics and equilibrium have been investigated as a function of initial copper ion concentration. pH, contact time and adsorbent dosage. Kinetics studies suggested that the adsorption allowed first order reaction. Equilibrium data were analyzed using Langmuir and Freundlich isotherm models. On the basis of experimental results and the model parameters, it can be concluded that the carbonaceousCynodon dactylonis effective for the removal of copper ion from aqueous solution.

scholarly journals Sustainable adsorption method for the remediation of malachite green dye using nutraceutical industrial fenugreek seed spent

2021 ◽  
Author(s):  
Syed Noeman Taqui ◽  
Mohan C. S. ◽  
Bibi Ahmadi Khatoon ◽  
Manzoore Elahi M. Soudagar ◽  
T. M. Yunus Khan ◽  
...  
Keyword(s):  
Malachite Green ◽  
Low Cost ◽  
Aqueous Media ◽  
Freundlich Isotherm ◽  
Study Data ◽  
Isotherm Model ◽  
Adsorption Method ◽  
Fenugreek Seed ◽  
Malachite Green Dye ◽  
Pseudo Second Order

AbstractNutraceutical industrial fenugreek seed spent (NIFGS), a relatively low-cost material abundantly available with nearly negligible toxicity for the bioremediation of malachite green (MG) dye from aqueous media, is reported. Studies on the various parameters affecting the adsorption capacity of NIFGS were carried out to evaluate the kinetics and the equilibrium thermodynamics. All the experiments were designed at about pH 7. The adsorption isotherm model proposed by Langmuir fits better than the Freundlich isotherm model. Kinetic study data confirms the viability of pseudo-second-order model. Calculated thermodynamic factors suggest that the adsorption phenomenon is endothermic, almost instantaneous, and physical in nature.

Adsorption Characteristics of Phenol in Aqueous Solution by Pinus massoniana Biochar

2013 ◽  
Vol 295-298 ◽  
pp. 1154-1160 ◽  
Author(s):  
Guo Zhi Deng ◽  
Xue Yuan Wang ◽  
Xian Yang Shi ◽  
Qian Qian Hong
Keyword(s):  
Aqueous Solution ◽  
Ph Value ◽  
Pinus Massoniana ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Adsorbent Dosage ◽  
Salt Ions ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order

The objective of this paper is to investigate the feasibility of phenol adsorption from aqueous solution by Pinus massoniana biochar. Adsorption conditions, including contact time, initial phenol concentration, adsorbent dosage, strength of salt ions and pH, have been investigated by batch experiments. Equilibrium can be reached in 24 h for phenol from 50 to 250 mg• L-1. The optimum pH value for this kind of biochar is 5.0. The amount of phenol adsorbed per unit decreases with the increase in adsorbent dosage. The existence of salt ions makes negligible influence on the equilibrium adsorption capacity. The experimental data is analyzed by the Freundlich and Langmuir isotherm models. Equilibrium data fits well to the Freundlich model. Adsorption kinetics models are deduced and the pseudo-second-order kinetic model provides a good correlation for the adsorbent process. The results show that the Pinus massoniana biochar can be utilized as an effective adsorption material for the removal of phenol from aqueous solution.

scholarly journals Investigation on adsorption capacity of TiO2-P25 nanoparticles in the removal of a mono-azo dye from aqueous solution: A comprehensive isotherm analysis

2014 ◽  
Vol 20 (1) ◽  
pp. 97-107 ◽  
Author(s):  
Mohammad Behnajady ◽  
Shahrzad Yavari ◽  
Nasser Modirshahla
Keyword(s):  
Aqueous Solution ◽  
Crystallite Size ◽  
Surface Area ◽  
High Surface ◽  
High Surface Area ◽  
Correlation Coefficients ◽  
Average Crystallite Size ◽  
Isotherm Models ◽  
Equilibrium Data ◽  
Pseudo Second Order

In this work TiO2-P25 nanoparticles with high surface area have been used as adsorbent for the removal of C.I Acid Red 27 (AR27), as an organic contaminant from aqueous solution. Characteristics of phases and crystallite size of TiO2-P25 nanoparticles were achieved from XRD and the surface area and pore size distribution were obtained from BET and BJH techniques. TiO2-P25 nanoparticles with almost 80% anatase and 20% rutile phases, the average crystallite size of 18 nm, have specific surface area of 56.82 m2 g-1. The effect of various parameters like initial AR27 concentration, pH, contact time and adsorbent dosage has been carried out in order to find desired adsorption conditions. The desired pH for adsorption of AR27 onto TiO2-P25 nanoparticles was 3. The equilibrium data were analyzed with various 2-, 3- and 4-parameter isotherm models. Equilibrium data fitted very well by the 4-parameter Fritz-Schluender model. Results of adsorption kinetics study indicated that the pseudo-second order kinetics provided the best fit with correlation coefficients close to unity.

scholarly journals Adsorption of As(V) from Aqueous Solution on Chitosan-Modified Diatomite

2020 ◽  
Vol 17 (2) ◽  
pp. 429 ◽  
Author(s):  
Qintao Yang ◽  
Liang Gong ◽  
Lili Huang ◽  
Qinglin Xie ◽  
Yijian Zhong ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Removal Efficiency ◽  
Ph Effect ◽  
Freundlich Isotherm ◽  
Xrd Analysis ◽  
Optimal Value ◽  
Equilibrium Data ◽  
Pseudo Second Order ◽  
Adsorption Desorption ◽  
Modified Diatomite

A novel chitosan (CS)-modified diatomite (Dt) was prepared by a simple mixture in the mass ratio to remove As(V) from aqueous solution in this research. The CS-modified Dt adsorbent was characterized by scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), and X-ray powder diffraction (XRD) analysis. The parameters to influence the adsorption of As(V) ion were studied under such conditions as kinetics, adsorption isotherm, and pH effect. The results revealed that adsorption of As(V) was initially rapid and the equilibrium time was reached after 40 min. The optimal value of the pH was 5.0 for better adsorption. The equilibrium data were well fitted to the Langmuir isotherm compared to the Freundlich isotherm, and exhibited the highest capacity and removal efficiency of 94.3% under an initial As(V) concentration of 5 mg/L. The kinetic data were well described by the pseudo-second-order model. In addition, 0.1 M NaOH has the best desorption efficiency of As(V) adsorbed on CS-modified Dt, and the removal efficiency of As(V) was still higher than 90% when after six adsorption-desorption cycles. These results showed that the CS-modified Dt could be considered as a potential adsorbent for the removal of As(V) in aqueous solution.

scholarly journals Adsorption of Toluene and Paraxylene from Aqueous Solution Using Pure and Iron Oxide Impregnated Carbon Nanotubes: Kinetics and Isotherms Study

2017 ◽  
Vol 2017 ◽  
pp. 1-11 ◽  
Author(s):  
Aamir Abbas ◽  
Basim Ahmed Abussaud ◽  
Ihsanullah ◽  
Nadhir A. H. Al-Baghli ◽  
Halim Hamid Redhwi
Keyword(s):  
Carbon Nanotubes ◽  
Aqueous Solution ◽  
Iron Oxide ◽  
Multiwall Carbon Nanotubes ◽  
Freundlich Isotherm ◽  
Nitrogen Adsorption ◽  
Isotherm Models ◽  
Batch Adsorption ◽  
Adsorption Analysis ◽  
Kinetics And Isotherms

Multiwall carbon nanotubes (CNTs) and iron oxide impregnated carbon nanotubes (CNTs-iron oxide) were investigated for the adsorption of hazardous toluene and paraxylene (p-xylene) from aqueous solution. Pure CNTs were impregnated with iron oxides nanoparticles using wet impregnation technique. Various characterization techniques including thermogravimetric analysis, scanning electron microscopy, elemental dispersion spectroscopy, X-ray diffraction, and nitrogen adsorption analysis were used to study the thermal degradation, surface morphology, purity, and surface area of the materials. Batch adsorption experiments show that iron oxide impregnated CNTs have higher degree of removal of p-xylene (i.e., 90%) compared with toluene (i.e., 70%), for soaking time 2 h, with pollutant initial concentration 100 ppm, at pH 6 and shaking speed of 200 rpm at 25°C. Pseudo-second-order model provides better fitting for the toluene and p-xylene adsorption. Langmuir and Freundlich isotherm models demonstrate good fitting for the adsorption data of toluene and p-xylene.

scholarly journals Equilibrium, Kinetics, and Thermodynamics of the Removal of Nickel(II) from Aqueous Solution Using Cow Hooves

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
I. Osasona ◽  
O. O. Ajayi ◽  
A. O. Adebayo
Keyword(s):  
Aqueous Solution ◽  
Contact Time ◽  
Room Temperature ◽  
Physical Adsorption ◽  
Low Cost ◽  
Freundlich Isotherm ◽  
Isotherm Models ◽  
Order Kinetic ◽  
Equilibrium Studies ◽  
Equilibrium Data

The feasibility of using powdered cow hooves (CH) for removing Ni2+ from aqueous solution was investigated through batch studies. The study was conducted to determine the effect of pH, adsorbent dosage, contact time, adsorbent particle size, and temperature on the adsorption capacity of CH. Equilibrium studies were conducted using initial concentration of Ni2+ ranging from 15 to 100 mgL−1 at 208, 308, and 318 K, respectively. The results of our investigation at room temperature indicated that maximum adsorption of Ni2+ occurred at pH 7 and contact time of 20 minutes. The thermodynamics of the adsorption of Ni2+ onto CH showed that the process was spontaneous and endothermic. Langmuir, Freundlich, and Dubinin-Radushkevich (D-R) isotherm models were used to quantitatively analysed the equilibrium data. The equilibrium data were best fitted by Freundlich isotherm model, while the adsorption kinetics was well described by pseudo-second-order kinetic equation. The mean adsorption energy obtained from the D-R isotherm revealed that the adsorption process was dominated by physical adsorption. Powdered cow hooves could be utilized as a low-cost adsorbent at room temperature under the conditions of pH 7 and a contact time of 20 minutes for the removal of Ni(II) from aqueous solution.

Sign in / Sign up

Export Citation Format

Share Document