scholarly journals Accessing 3D Location of Standing Pelvis: Relative Position of Sacral Plateau and Acetabular Cavities versus Pelvis

2012 ◽  
Vol 2012 ◽  
pp. 1-10
Author(s):  
E. Berthonnaud ◽  
R. Hilmi ◽  
J. Dimnet
Keyword(s):  
Femoral Head ◽  
Relative Position ◽  
Optimal Location ◽  
Bone Modeling ◽  
X Rays ◽  
Standing Posture ◽  
X Ray ◽  
Geometric Models ◽  
Articular Surfaces ◽  
Best Fit

The goal of this paper is to access to pelvis position and morphology in standing posture and to determine the relative locations of their articular surfaces. This is obtained from coupling biplanar radiography and bone modeling. The technique involves different successive steps. Punctual landmarks are first reconstructed, in space, from their projected images, identified on two orthogonal standing X-rays. Geometric models, of global pelvis and articular surfaces, are determined from punctual landmarks. The global pelvis is represented as a triangle of summits: the two femoral head centers and the sacral plateau center. The two acetabular cavities are modeled as hemispheres. The anterior sacral plateau edge is represented by an hemi-ellipsis. The modeled articular surfaces are projected on each X-ray. Their optimal location is obtained when the projected contours of their models best fit real outlines identified from landmark images. Linear and angular parameters characterizing the position of global pelvis and articular surfaces are calculated from the corresponding sets of axis. Relative positions of sacral plateau, and acetabular cavities, are then calculated. Two hundred standing pelvis, of subjects and scoliotic patients, have been studied. Examples are presented. They focus upon pelvis orientations, relative positions of articular surfaces, and pelvis asymmetries.

X-RAY SPECTRAL ANALYSIS OF SU UMa TYPE DWARF NOVAE OBSERVED WITH ROSAT

2003 ◽  
Vol 12 (04) ◽  
pp. 739-755 ◽  
Author(s):  
GÜLNUR ÝKİS GÜN ◽  
E. NİHAL ERCAN
Keyword(s):  
Spectral Analysis ◽  
Quiescent State ◽  
X Rays ◽  
Dwarf Novae ◽  
Spectral Parameters ◽  
X Ray ◽  
Spectral Models ◽  
Accretion Rates ◽  
Mass Evaporation ◽  
Best Fit

X-ray spectral parameters were determined for eight SU UMa type Dwarf Novae observed with the ROSAT PSPC. The raw data were fitted with various spectral models and the best fit spectral models are found to be that of Raymond–Smith and Thermal Bremsstrahlung. The best fit temperatures were estimated to be between kT ~ 1.1-1.8 keV while the Column Densities were found to be between NH ~ 2.4×1020-4.1×1020 cm -2. The estimated 0.1-2.4 keV fluxes were in the range of log FX=-13 to -11 ergs cm-2 s-1. FX/F UV and FX/F opt rates were calculated to be between ~0.09 and ~0.37. This shows that most of the energy is radiated in the Optical and Ultraviolet band from the accretion disk in the quiescent state. Many of the SU UMa type Dwarf Novae show an Ultraviolet lag in their outburst spectrum, the Coronal Siphon Flow Model of Meyer and Meyer-Hofmeister may explain this phenomenon. This model proposes a corona at the boundary layer of a system when it is a quiescent state and suggests that some parts of the X-rays come from the corona. For these reasons, the equations of this model were applied to the results of the spectral analysis. Using this model, the mass accretion rates, the mass evaporation rates, and the radii of the coronas were calculated to be ~10-12.3-10-11.3 M⊙ yr -1, ~10-6.5-10-5.5 g cm -2 s -1 and ~109.1-109.9 cm , respectively. The pressures in the coronas were less than ~1200 g cm -2 s -1 for (z) up to ~10×109 cm . The obtained values suggest that the Corona model can indeed operate in SU UMa type Dwarf Novae.

scholarly journals Modelling the Soft X-ray Excess in E1615+061

1994 ◽  
Vol 159 ◽  
pp. 317-317
Author(s):  
M. Bałucińska-Church ◽  
L. Piro ◽  
H. Fink ◽  
F. Fiore ◽  
M. Matsuoka ◽  
...  
Keyword(s):  
Power Law ◽  
Column Density ◽  
High Energy ◽  
X Rays ◽  
Hard Component ◽  
X Ray ◽  
Simple Power ◽  
High Energy Tail ◽  
Photon Index ◽  
Best Fit

SummaryWe report results of an international UV – X-ray campaign in 1990–1992 involving the IUE, Rosat and Ginga satellites to observe E1615+061, a Seyfert 1 galaxy with peculiar spectral and intensity behaviour over the last 20 years. The source has been found to be stable in its medium state during the observations. The Ginga (1–20 keV) spectrum of E1615+061 is adequately represented by a simple power law with a photon index α = 1.8 ± 0.1. However, α ∼ 2, as expected for the intrinsic power law component in a reflection model, cannot be ruled out statistically. The Rosat PSPC (0.1–2 keV) spectra collected during the All Sky Survey and the AO-1 phase can be well-described by a simple power law (α = 2.2 ± 0.1) with cold absorber (NH = 3.5 ± 0.3 · 10λ20 H/cmλ2). Both the photon index being significantly different than that obtained from the Ginga spectrum and the column density being smaller than the galactic column (NH ∼ 4.2 · 10λ20 H/cmλ2) give an indication of a soft excess over and above the hard component seen in the Ginga spectrum. E1615+061 has been observed with IUE in 1990 and in 1992. The source was stable and the colour excess E(B-V) derived from the data = 0.1 is in good agreement with that expected from the galactic absorption.To parameterise the soft excess we fitted the Rosat data with a two-component model consisting of a power law, and a blackbody or thermal bremsstrahlung, with a single galactic absorption term. The column density and the slope of the power law were kept constant. The blackbody temperature was 80 ± 6 eV and 63 ± 12 eV for photon index equal to 1.8 and 2.0, respectively, whereas the bremsstrahlung temperature was 220 ± 40 eV and 115 ± 30 eV for the two cases.An attempt to model the soft excess seen in the Rosat PSPC spectrum has been made assuming that the soft excess is the high energy tail of a disc spectrum which peaks in the UV part of the spectrum. Additionally it was assumed that there is a hard component contributing to the spectrum from UV to X-rays with parameters as described by the Ginga spectrum. The best fit parameters: the mass of the central source and the mass accretion rate were around 5 ± 1 · 10λ6 M⊙ and 0.2 ± 0.04 M⊙/yr, respectively.Our modelling shows that the soft X-ray excess can be described (χredλ2 < 1.2) as the high energy tail of an accretion disk spectrum if the intrinsic power law is quite steep (α = 2). The main contribution to the residuals in the Rosat PSPC range comes from 0.3–0.6 keV, with a tendency for these residuals to increase when the slope gets flatter. The accretion luminosity is ∼ 6.5 · 10λ44 erg/s for the best fit parameters, i.e. about the Eddington luminosity.

scholarly journals X-Ray Observations of VY Scl-Type Nova-Like Binaries in the High and Low State

2015 ◽  
Vol 2 (1) ◽  
pp. 269-272
Author(s):  
P. Zemko ◽  
M. Orio
Keyword(s):  
Previous Article ◽  
X Rays ◽  
High State ◽  
Plasma Model ◽  
X Ray ◽  
Polar Caps ◽  
Thermonuclear Burning ◽  
Best Fit ◽  
Tt Ari

Four VY Scl-type nova-like systems were observed in X-rays both during the low and the high optical states. They are BZ Cam, MV Lyr, TT Ari, and V794 Aql. Using archival ROSAT, <em>Swift</em> and <em>SUZAKU</em> observations we found that the X-ray flux for BZ Cam is higher during the low state, but there is no supersoft X-ray source (SSS) that would indicate the thermonuclear burning predicted in a previous article. The X-ray flux is lower by a factor 2–10 in the low than the high state in other systems, and does not reflect the drop in <em>˙M</em> inferred from optical and UV data. The best fit model for the X-ray spectra is a collisionally ionized plasma model. The X-ray flux may originate in a shocked wind or in accretion onto polar caps in intermediate polar systems that continues even during the low state.

White-Light Coronal Structures: Streamers and CMEs

1994 ◽  
Vol 144 ◽  
pp. 82
Author(s):  
E. Hildner
Keyword(s):  
Emission Line ◽  
Electron Density ◽  
White Light ◽  
Coronal Mass Ejections ◽  
X Rays ◽  
Solar Cycles ◽  
Temperature Function ◽  
X Ray ◽  
Eclipse Observations ◽  
Coronal Structures

AbstractOver the last twenty years, orbiting coronagraphs have vastly increased the amount of observational material for the whitelight corona. Spanning almost two solar cycles, and augmented by ground-based K-coronameter, emission-line, and eclipse observations, these data allow us to assess,inter alia: the typical and atypical behavior of the corona; how the corona evolves on time scales from minutes to a decade; and (in some respects) the relation between photospheric, coronal, and interplanetary features. This talk will review recent results on these three topics. A remark or two will attempt to relate the whitelight corona between 1.5 and 6 R⊙to the corona seen at lower altitudes in soft X-rays (e.g., with Yohkoh). The whitelight emission depends only on integrated electron density independent of temperature, whereas the soft X-ray emission depends upon the integral of electron density squared times a temperature function. The properties of coronal mass ejections (CMEs) will be reviewed briefly and their relationships to other solar and interplanetary phenomena will be noted.

Chemical Species Identification in an SEM by Changes in Emitted X-Ray Energies

1974 ◽  
Vol 32 ◽  
pp. 570-571
Author(s):  
R. H. Duff
Keyword(s):  
Species Identification ◽  
Valence Electron ◽  
Chemical Species ◽  
X Rays ◽  
Chemical Bonds ◽  
Small Shift ◽  
X Ray ◽  
Electron Transitions ◽  
Peak Energy ◽  
Chemical Combination

A material irradiated with electrons emits x-rays having energies characteristic of the elements present. Chemical combination between elements results in a small shift of the peak energies of these characteristic x-rays because chemical bonds between different elements have different energies. The energy differences of the characteristic x-rays resulting from valence electron transitions can be used to identify the chemical species present and to obtain information about the chemical bond itself. Although these peak-energy shifts have been well known for a number of years, their use for chemical-species identification in small volumes of material was not realized until the development of the electron microprobe.

Influence of X-Ray Induced Fluorescence on Energy Dispersive X-Ray Analysis of Thin Foils

1977 ◽  
Vol 35 ◽  
pp. 328-329
Author(s):  
E. A. Kenik ◽  
J. Bentley
Keyword(s):  
Thin Foil ◽  
Electron Excitation ◽  
Simple Approach ◽  
Foil Thickness ◽  
X Rays ◽  
X Ray ◽  
Hole Spectrum ◽  
Illumination System ◽  
Thin Foils ◽  
Intensity Ratios

Cliff and Lorimer (1) have proposed a simple approach to thin foil x-ray analy sis based on the ratio of x-ray peak intensities. However, there are several experimental pitfalls which must be recognized in obtaining the desired x-ray intensities. Undesirable x-ray induced fluorescence of the specimen can result from various mechanisms and leads to x-ray intensities not characteristic of electron excitation and further results in incorrect intensity ratios.In measuring the x-ray intensity ratio for NiAl as a function of foil thickness, Zaluzec and Fraser (2) found the ratio was not constant for thicknesses where absorption could be neglected. They demonstrated that this effect originated from x-ray induced fluorescence by blocking the beam with lead foil. The primary x-rays arise in the illumination system and result in varying intensity ratios and a finite x-ray spectrum even when the specimen is not intercepting the electron beam, an ‘in-hole’ spectrum. We have developed a second technique for detecting x-ray induced fluorescence based on the magnitude of the ‘in-hole’ spectrum with different filament emission currents and condenser apertures.

X-ray micro tomography in the scanning electron microscope

1978 ◽  
Vol 36 (1) ◽  
pp. 106-107 ◽  
Author(s):  
W. Brünger
Keyword(s):  
Electron Beam ◽  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
Target Surface ◽  
The Body ◽  
X Rays ◽  
Cross Sectional ◽  
X Ray ◽  
Micro Tomography ◽  
Scanning Electron

Reconstructive tomography is a new technique in diagnostic radiology for imaging cross-sectional planes of the human body /1/. A collimated beam of X-rays is scanned through a thin slice of the body and the transmitted intensity is recorded by a detector giving a linear shadow graph or projection (see fig. 1). Many of these projections at different angles are used to reconstruct the body-layer, usually with the aid of a computer. The picture element size of present tomographic scanners is approximately 1.1 mm2.Micro tomography can be realized using the very fine X-ray source generated by the focused electron beam of a scanning electron microscope (see fig. 2). The translation of the X-ray source is done by a line scan of the electron beam on a polished target surface /2/. Projections at different angles are produced by rotating the object.During the registration of a single scan the electron beam is deflected in one direction only, while both deflections are operating in the display tube.

Digital x-ray mapping of nanometer-size supported bimetallic catalysts

1988 ◽  
Vol 46 ◽  
pp. 530-531
Author(s):  
L. T. Germinario
Keyword(s):  
Background Radiation ◽  
Metal Cluster ◽  
Single Element ◽  
Beam Diameter ◽  
X Rays ◽  
X Ray ◽  
Major Interest ◽  
Induced Changes

Understanding the role of metal cluster composition in determining catalytic selectivity and activity is of major interest in heterogeneous catalysis. The electron microscope is well established as a powerful tool for ultrastructural and compositional characterization of support and catalyst. Because the spatial resolution of x-ray microanalysis is defined by the smallest beam diameter into which the required number of electrons can be focused, the dedicated STEM with FEG is the instrument of choice. The main sources of errors in energy dispersive x-ray analysis (EDS) are: (1) beam-induced changes in specimen composition, (2) specimen drift, (3) instrumental factors which produce background radiation, and (4) basic statistical limitations which result in the detection of a finite number of x-ray photons. Digital beam techniques have been described for supported single-element metal clusters with spatial resolutions of about 10 nm. However, the detection of spurious characteristic x-rays away from catalyst particles produced images requiring several image processing steps.

X-ray diffraction properties of curved crystal diffractors

1992 ◽  
Vol 50 (2) ◽  
pp. 1734-1735
Author(s):  
W. Z. Chang ◽  
D. B. Wittry
Keyword(s):  
Diffraction Theory ◽  
X Rays ◽  
Diffraction Image ◽  
X Ray Diffraction ◽  
Rocking Curve ◽  
X Ray ◽  
Bent Crystal ◽  
Diffraction Geometry ◽  
Crystal Parameter ◽  
Quantitative Procedure

Since Du Mond and Kirkpatrick first discussed the principle of a bent crystal spectrograph in 1930, curved single crystals have been widely utilized as spectrometric monochromators as well as diffractors for focusing x rays diverging from a point. Curved crystal diffraction theory predicts that the diffraction parameters - the rocking curve width w, and the peak reflection coefficient r of curved crystals will certainly deviate from those of their flat form. Due to a lack of curved crystal parameter data in current literature and the need for optimizing the choice of diffraction geometry and crystal materials for various applications, we have continued the investigation of our technique presented at the last conference. In the present abstract, we describe a more rigorous and quantitative procedure for measuring the parameters of curved crystals.The diffraction image of a singly bent crystal under study can be obtained by using the Johann geometry with an x-ray point source.

Studies of metaphase chromosomes in the scanning transmission x-ray microscope: Image fidelity, radiation damage and specimen preparation

1992 ◽  
Vol 50 (2) ◽  
pp. 1038-1039
Author(s):  
Shawn Williams ◽  
Xiaodong Zhang ◽  
Susan Lamm ◽  
Jack Van’t Hof
Keyword(s):  
Visible Light ◽  
Radiation Damage ◽  
Cross Section ◽  
Imaging Techniques ◽  
Dose Range ◽  
Specimen Preparation ◽  
X Rays ◽  
Metaphase Chromosomes ◽  
X Ray ◽  
Scanning Transmission

The Scanning Transmission X-ray Microscope (STXM) is well suited for investigating metaphase chromosome structure. The absorption cross-section of soft x-rays having energies between the carbon and oxygen K edges (284 - 531 eV) is 6 - 9.5 times greater for organic specimens than for water, which permits one to examine unstained, wet biological specimens with resolution superior to that attainable using visible light. The attenuation length of the x-rays is suitable for imaging micron thick specimens without sectioning. This large difference in cross-section yields good specimen contrast, so that fewer soft x-rays than electrons are required to image wet biological specimens at a given resolution. But most imaging techniques delivering better resolution than visible light produce radiation damage. Soft x-rays are known to be very effective in damaging biological specimens. The STXM is constructed to minimize specimen dose, but it is important to measure the actual damage induced as a function of dose in order to determine the dose range within which radiation damage does not compromise image quality.

Sign in / Sign up

Export Citation Format

Share Document