scholarly journals Effect of Magnesium Borates on the Fire-Retarding Properties of Zinc Borates

2014 ◽  
Vol 2014 ◽  
pp. 1-12 ◽  
Author(s):  
Azmi Seyhun Kipcak ◽  
Nil Baran Acarali ◽  
Emek Moroydor Derun ◽  
Nurcan Tugrul ◽  
Sabriye Piskin
Keyword(s):  
Raw Materials ◽  
High Strength ◽  
High Heat ◽  
Zinc Borate ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Magnesium Borate ◽  
Sem Images ◽  
Ir And Raman Spectroscopies ◽  
Coefficient Of Elasticity

Magnesium borate (MB) is a technical ceramic exhibiting high heat resistance, corrosion resistance, great mechanical strength, great insulation properties, lightweightness, high strength, and a high coefficient of elasticity. Zinc borate (ZB) can be used as a multifunctional synergistic additive in addition to flame retardant additives in polymers. In this study, the raw materials of zinc oxide (ZnO), magnesium oxide (MgO), and boric acid (H3BO3) were used in the mole ratio of 1 : 1 : 9, which was obtained from preexperiments. Using the starting materials, hydrothermal synthesis was applied, and characterisation of the products was performed using X-Ray diffraction (XRD) and Fourier transform infrared (FT-IR) and Raman spectroscopies. The forms of Zn3B6O12·3.5H2O, MgO(B2O3)3·7(H2O), and Mg2(B6O7(OH)6)2·9(H2O) were synthesised successfully. Moreover, the surface morphology was investigated using scanning electron microscopy (SEM), and the B2O3content was determined. In addition, the reaction yields were calculated. The results of the B2O3content analysis were in compliance with the literature values. Examination of the SEM images indicated that the obtained nanoscale minerals had a reaction efficiency ranging between 63–74% for MB and 87–98% for ZB. Finally, the fire-retarding properties of the synthesised pure MBs, pure ZBs, and mixtures of MB and ZB were determined using differential thermal analysis and thermal gravimetry (DTA-TG) and differential scanning calorimetry (DSC).

Design and synthesis of high heat-resistant, soluble, and hydrophobic fluorinated polyimides containing pyridine and trifluoromethylthiophenyl units

2017 ◽  
Vol 31 (1) ◽  
pp. 107-115 ◽  
Author(s):  
Xiaohua Huang ◽  
Hua Li ◽  
Chanjuan Liu ◽  
Chun Wei
Keyword(s):  
Raw Materials ◽  
High Heat ◽  
Amorphous Structure ◽  
X Ray Diffraction ◽  
Hydrophobic Property ◽  
Scanning Calorimetry ◽  
Design And Synthesis ◽  
Fluorinated Polyimides ◽  
And Performance ◽  
Tetracarboxylic Dianhydride

In this study, a novel diamine monomer, 4-(4-trifluoromethylthiophenyl)-2,6-bis(4-aminophenyl)pyridine (FTPAP) was synthesized through two-step reaction from 4-trifluoromethylthiobenzaldehyde and 4-nitroacetophenone as raw materials, and then the structure of FTPAP was characterized by Fourier transform infrared (FTIR) spectroscopy, nuclear magnetic resonance, and mass spectrometry. A series of fluorinated polyimides were prepared from FTPAP with five commercial dianhydrides, namely, pyromellitic dianhydride, biphenyl tetracarboxylic dianhydride, oxydiphtahalic anhydride, benzophenone tetracarboxylic dianhydride, and 4,4′-(hexafluoroisopropylidene) diphthalic anhydride. The structure and performance of the fluorinated polymers were fully characterized by FTIR, differential scanning calorimetry, thermogravimetric analysis, and wide-angle X-ray diffraction (WAXD). The inherent viscosity of polymers ranged from 0.41 to 1.45 dL g−1. These polymers displayed good solubility in polar aprotic solvents, such as N, N-dimethylformamide, N, N-dimethylacetamide, dimethyl sulfoxide, and N-methyl-2-pyrrolidone, at room temperature or on heating. Furthermore, they exhibited outstanding thermal stability with glass transition temperatures beyond 305°C, and the temperature of 10% weight loss was in the range of 514–573°C with more than 56% residue at 800°C under nitrogen. Moreover, they showed high optical transparency with the cutoff wavelengths in the range of 385–457 nm and excellent hydrophobic property with contact angle in the range of 82.8–97.6°. In addition, the results of WAXD indicated that all of the polymers presented amorphous structure.

Ultrasonic-Assisted Synthesis of Zinc Borates: Effect of Boron Sources

2020 ◽  
Vol 42 (6) ◽  
pp. 839-839
Author(s):  
Fatma Tugce Senberber Dumanli Fatma Tugce Senberber Dumanli ◽  
Azmi Seyhun Kipcak Azmi Seyhun Kipcak ◽  
Duygu Sena Vardar and Nurcan Tugrul Duygu Sena Vardar and Nurcan Tugrul
Keyword(s):  
Raw Materials ◽  
Inorganic Compounds ◽  
Zinc Borate ◽  
X Ray Diffraction ◽  
Ultrasonic Probe ◽  
Total Mass Loss ◽  
Minimum Particle Size ◽  
Ir And Raman Spectroscopies ◽  
Ultrasonic Assisted ◽  
Ft Ir

Sonochemistry meaning ultrasound-assisted chemistry plays an important role in the synthesis of inorganic compounds. Among these inorganic compounds, zinc borates are used for the flame-retarding agent. In this study using zinc chloride (ZnCl2), boric acid (H3BO3), Na2B4O7and#183;10H2O, Na2B4O7and#183;5H2O and NaOH as raw materials, a zinc borate compound in the formulae of Zn3B6O12and#183;3.5H2O was obtained using an ultrasonic probe. Crystal structures of samples were identified using X-ray diffraction (XRD). The symmetric and asymmetric stretching between boron and oxygen atoms were searched by Fourier-transform infrared (FT-IR) and Raman spectroscopies. The effects of boron sources on sample morphology were examined by scanning electron microscopy (SEM). From the results, it was seen that Zn3B6O12and#183;3.5H2O can easily be produced from these raw materials with the synthesis parameters of 80-90and#176;C and 40-55 min. From the SEM results, it was seen that the minimum particle size obtained was 172 nm. Reaction efficiencies were calculated between 79.6 and 94.0 and#177; 0.5%. Thermal feature of the obtained pure phase, investigated with the thermogravimetric analyses. The dehydration of the synthesized Zn3B6O12and#183;3.5H2O was seen between 262 and 413and#176;C with a total mass loss of 13.25%.

Synthesis of Spherical LiFePO4/C Composites as Cathode Material of Lithium-Ion Batteries by a Novel Glucose Assisted Hydrothermal Method

2013 ◽  
Vol 787 ◽  
pp. 58-64 ◽  
Author(s):  
Xiang Feng Li ◽  
Zhao Zhang ◽  
Fang Liu ◽  
Shu Ping Zheng
Keyword(s):  
Hydrothermal Method ◽  
Raw Materials ◽  
Lithium Ion ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
High Discharge ◽  
X Ray ◽  
High Discharge Capacity ◽  
Optimal Sample ◽  
Structure Morphology

The LiFePO4/C composites with different morphology are synthesized by a novel glucose assisted hydrothermal method at various glucose concentrations (from 0 to 0.25mol/L) and the insoluble lithium source Li2CO3, (NH4)2Fe (SO4)2·6H2O and (NH4)2HPO4(n (Li):n (Fe):n (P)=1:1:1) are used as raw materials. The structure, morphology, thermal performance and electrochemical properties of the synthesized composites are characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), thermogravimetry/differential scanning calorimetry (TG-DSC), galvanostatic charge/discharge tests and cyclic voltammetry (CV). The results show that the LiFePO4/C synthesized with 0.125mol/L glucose has the relatively small particles size (0.1~0.5μm) and the well spherical morphology. The optimal sample exhibits a high discharge capacity of 160.0mAh/g at the first cycle and exhibits a good reversibility and stability in CV tests.

scholarly journals Sonochemical-assisted magnesium borate synthesis from different boron sources

2017 ◽  
Vol 19 (1) ◽  
pp. 81-88 ◽  
Author(s):  
Meral Yildirim ◽  
Azmi Seyhun Kipcak ◽  
Emek Moroydor Derun
Keyword(s):  
High Efficiency ◽  
Synthesis Method ◽  
Spectroscopic Studies ◽  
X Ray Diffraction ◽  
Magnesium Borate ◽  
Ir And Raman Spectroscopies ◽  
Ft Ir ◽  
Surface Morphologies ◽  
Ir And Raman ◽  
Good Agreement

Abstract In this study, sonochemical-assisted magnesium borate synthesis is studied from different boron sources. Various reaction parameters are successfully applied by a simple and green method. X-ray diffraction (XRD), Fourier transform infrared (FT-IR) and Raman spectroscopies are used to characterize the synthesized magnesium borates on the other hand surface morphologies are investigated by using scanning electron microscope (SEM). The XRD analyses showed that the products were admontite [MgO(B2O3)3 · 7(H2O)] with JCPDS (Joint Committee on Powder Diffraction Standards) no. of 01-076-0540 and mcallisterite [Mg2(B6O7(OH)6)2 · 9(H2O)] with JCPDS no. of 01-070-1902. The results that found in the spectroscopic studies were in a good agreement with characteristic magnesium borate bands in both regions of infra-red and visible. According to SEM results, obtained borates were in micro and sub-micro scales. By the use of ultrasonication, reaction yields were found between 84.2 and 97.9%. As a result, it is concluded that the sonochemical approach is a practicable synthesis method to get high efficiency and high crystallinity in the synthesis magnesium borate compounds.

scholarly journals Synthesis and Crystal Structure of the Bioinorganic Complex [Sb(Hedta)]·2H2O

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Di Li ◽  
Guo-Qing Zhong
Keyword(s):  
Crystal Structure ◽  
Ethylenediaminetetraacetic Acid ◽  
Raw Materials ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Cell Parameters ◽  
Composition And Structure ◽  
Decomposition Processes ◽  
Distorted Trigonal Bipyramid

The antimony(III) complex [Sb(Hedta)]·2H2O was synthesized with ethylenediaminetetraacetic acid (H4edta) and antimonous oxide as main raw materials in aqueous solution. The composition and structure of the complex were characterized by elemental analysis, infrared spectra, single crystal X-ray diffraction, X-ray powder diffraction, thermogravimetry, and differential scanning calorimetry. The crystal structure of the antimony(III) complex belongs to orthorhombic system, space group Pna2(1), with cell parameters ofa=18.4823(18) Å,b=10.9408(12) Å,c=7.3671(5) Å,V=1489.7(2) Å3,Z=4, andDc=1.993 g cm−3. The Sb(III) ion is five-coordinated by two amido N atoms and three carboxyl O atoms from a single Hedta3−ligand, forming a distorted trigonal bipyramid geometry. The thermal decomposition processes of the complex include dehydration, oxidation, and pyrolysis of the ligand, and the last residue is Sb2O3at the temperature of 570°C.

Preparation, characterization, and properties of polystyrene/Na-montmorillonite composites

2018 ◽  
Vol 32 (8) ◽  
pp. 1078-1091 ◽  
Author(s):  
Sibel Erol Dağ ◽  
Pınar Acar Bozkurt ◽  
Fatma Eroğlu ◽  
Meltem Çelik
Keyword(s):  
Electron Microscopy ◽  
Interlayer Spacing ◽  
Decomposition Temperature ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Sem Images ◽  
Specific Pore Volume ◽  
Transmission Electron ◽  
Thermal Stability Of

A series of polystyrene (PS)/unmodified Na-montmorillonite (Na-MMT) composites were prepared via in situ radical polymerization. The prepared composites were characterized using various techniques. The presence of various functional groups in the unmodified Na-MMT and PS/unmodified Na-MMT composite was confirmed by Fourier transform infrared spectroscopy. Morphology and particle size of prepared composites was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). According to the XRD and TEM results, the interlayer spacing of MMT layers was expanded. SEM images showed a spongy and porous-shaped morphology of composites. TEM revealed the Na-MMT intercalated in PS matrix. The thermal stability of PS/unmodified Na-MMT composites was significantly improved as compared to PS, which is confirmed using thermogravimetric analysis (TGA). The TGA curves indicated that the decomposition temperature of composites is higher at 24–51°C depending on the composition of the mixture than that of pure PS. The differential scanning calorimetry (DSC) results showed that the glass transition temperature of composites was higher as compared to PS. The moisture retention, water uptake, Brunauer–Emmett–Teller specific surface area, and specific pore volume of composites were also investigated. Water resistance of the composites can be greatly improved.

Synthesis of V2O5 Powders by EDTA Assistance Ultrasound Sol-Gel Process

2012 ◽  
Vol 512-515 ◽  
pp. 207-210
Author(s):  
Quan Wen ◽  
Jian Feng Huang ◽  
Li Yun Cao ◽  
Jian Peng Wu
Keyword(s):  
Activation Energy ◽  
Raw Materials ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Calcination Temperatures ◽  
Sol Gel Process ◽  
Ft Ir ◽  
Precursor Powders ◽  
Influence Of Ph

V2O5 powders were successfully synthesized by the EDTA assistanced ultrasound sol-gel process using NH4VO3 and EDTA, NH3•H2O as raw materials. The synthesized activation energy and the influence of pH values and the calcination temperatures on the phases and microstructures of powders were particularly investigated. The precursor powders and the V2O5 powders were characterized by X-ray diffraction (XRD), fourier transform inelectron microscopy (FT-IR), scanning electron microscopy (SEM) and differential scanning calorimetry-thermal gravimetric (DSC-TG). Results show that the obtained products exhibit good crystallization under the conditions of pH=4, calcination temperature 400~500 °C and calcination time 0.5 h during the synthesizing process. The as-prepared V2O5 powders show preferred growth orientation along (001) plane at the pH=4. By DSC analysis, the ultrasonic cavitation result in the decrease in synthesized activation energy obviously than that was prepared without ultrasonic irradiation.

Synthesis of a Novel B3CN3 Compound by Pyrolysis of Precursor

2007 ◽  
Vol 336-338 ◽  
pp. 1080-1083 ◽  
Author(s):  
Jian Yang ◽  
Tai Qiu ◽  
Chun Ying Shen
Keyword(s):  
Raw Materials ◽  
Pyrolysis Product ◽  
X Ray Diffraction ◽  
Sem Images ◽  
Organic Precursor ◽  
Xps Spectra ◽  
N2 Atmosphere ◽  
Graphite Structure ◽  
Approximate Composition ◽  
C And N

An organic precursor was synthesized with C3N6H6 and H3BO3 as raw materials in aqueous solution. A novel amorphous BCN compound was obtained by thermolysis of the precursor at 1900°C in flowing N2 atmosphere. Single crystal X-ray diffraction analysis reveals that the precursor is a supramolecular compound with a formula C3N6H6(H3BO3)2. The pyrolysis product was characterized by XRD, XPS, FTIR, and SEM. XRD results reveal that the pyrolysis product has a turbostratic graphite structure. XPS analysis confirms the formation of nitrogen-rich BCN ternary compound with an approximate composition of B3CN3. Both the deconvoluted XPS spectra and FTIR spectrum indicate that B-N, B-C, and C-N chemical bonds have been established and there is no phase separation of graphite and h-BN occurred, which suggests an atomic-level hybrid of B, C, and N in the compound. SEM images show that the crystal shape of the B3CN3 compound is columnar, which is similar to the precursor.

Synthesis and Characterization of New Polyurethane Adhesives

2006 ◽  
Vol 514-516 ◽  
pp. 843-847 ◽  
Author(s):  
Cristina Borges Correia ◽  
João C. Bordado
Keyword(s):  
Raw Materials ◽  
Impact Resistance ◽  
Inert Atmosphere ◽  
Stray Field ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Polyurethane Adhesives ◽  
Dimer Acids

Polyurethane adhesives provide excellent flexibility, impact resistance and durability. Polyurethanes are formed through the reaction of an isocyanate component with polyether or polyester polyols or other active hydrogen compounds. This paper refers to polyurethane adhesives made from polyester polyols with long aliphatic chains (up to 36 carbon atoms) and MDI (diphenylmethane-4,4’-diisocyanate). The polyester polyols have been made from dimer acids obtained from renewable sources and short chain diols. The polyols that were used presented different degrees of unsaturation. The influence of the different raw materials in the adhesives performance is studied. The polyurethanes were produced by reaction between quasi-stoichiometric quantities of polyol and MDI, at several temperatures. The reaction was carried under inert atmosphere and at temperatures below 100°C. Performance of the adhesives was tested by carrying adhesion, hardness and water absorption tests. Characterization of both the polyester polyols and polyurethane adhesives was carried by Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), Magnetic Nuclear Resonance (NMR), X-Ray Diffraction (WAXD), Scanning RMN Imaging of 1H of Stray- Field b (MRI) and Brookfield viscometry.

scholarly journals Effects of annealing parameters on phase, structure and thermochromic properties of VO2 (M) derived from nanostructured VO2(B)

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Hamdi Muhyuddin Barra ◽  
Soo Kien Chen ◽  
Nizam Tamchek ◽  
Zainal Abidin Talib ◽  
Oon Jew Lee ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Phase Transition ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Sem Images ◽  
X Ray ◽  
Thermogravimetric Analyzer ◽  
Different Temperatures ◽  
Thermochromic Properties ◽  
Scanning Electron

Abstract Synthesis of thermochromic VO2 (M) was successfully done by annealing hydrothermally-prepared VO2 (B) at different temperatures and times. Conversion of the metastable VO2 (B) to the thermochromic VO2 polymorph was studied using thermogravimetric analyzer (TGA) under N2 atmosphere. Moreover, the phase and morphology of the synthesized samples were studied using X-ray diffraction (XRD) and field-emission scanning electron microscopy (FE-SEM), respectively. Accordingly, the XRD scans of all the annealed samples exhibited the presence of monoclinic VO2 (M), while the FE-SEM images of the samples showed the formation of nanorods and nanospheres, particularly those heated at high temperatures (650 °C and 700 °C). Meanwhile, differential scanning calorimetry (DSC) was used to measure the phase transition temperature (τc), hysteresis, and enthalpy of the prepared VO2. Based on these results, all samples displayed a τc of about 66 °C. However, the hysteresis was high for the samples annealed at lower temperatures (550 °C and 600 °C), while the enthalpy was very low for samples heated at lower annealing time (1.5 h and 1 h). These findings showed that crystallinity and nanostructure formation affected the thermochromic properties of the samples. In particular, the sample annealed at 650 °C showed better crystallinity and improved thermochromic behavior.

Sign in / Sign up

Export Citation Format

Share Document