scholarly journals Feasibility of Using Palmyrah Strips as Reinforcing Material in Cost Effective Houses

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
K. Baskaran ◽  
H. E. Mallikarachchi ◽  
M. J. P. L. M. Jayasekara ◽  
G. A. T. Madushanka
Keyword(s):  
Building Materials ◽  
Residential Buildings ◽  
Cost Effective ◽  
Capital Investments ◽  
Economic Resource ◽  
Moment Capacity ◽  
Reinforced Beams ◽  
Failure Loads ◽  
Predicted Values ◽  
The Moment

Construction of cost effective houses is a dilemma among the impoverished population in developing countries. The ever increasing price of traditional building materials results in high capital investments for residential buildings. Palmyrah is a significant economic resource, widely spread all over the northeast region of Sri Lanka. This research explores the technical feasibility of using heartwood of Palmyrah as a reinforcing member in lightly loaded concrete elements. Initially, mechanical properties of Palmyrah were examined through static bending, tensile, and compressive tests. Percentages of water absorption, dimensional stability, and anchorage bond strength were investigated to envisage the suitability of Palmyrah as reinforcement. Next, several short span slabs and beams reinforced with Palmyrah strips were subjected to tests. It was observed that Palmyrah reinforcement enhanced the moment capacity of the slabs and beams compared to unreinforced sections. Experimental failure loads of slabs and beams were higher than theoretically predicted values with Palmyrah reinforcement. Further, Palmyrah reinforced beams and slabs underwent flexural failures. Thus, it is concluded that heartwood of Palmyrah has the potential to be used as reinforcement in lightly loaded slabs and beams. Further research is recommended to investigate the durability and serviceability issues.

Pre-Treatment of Vegetable Waste in the Production of Composite Materials

2017 ◽  
Vol 743 ◽  
pp. 53-57 ◽  
Author(s):  
Ruslan R. Safin ◽  
Farida V. Nazipova ◽  
Ruslan R. Khasanshin ◽  
Alexander E. Voronin
Keyword(s):  
Building Materials ◽  
Raw Materials ◽  
Soluble Sugars ◽  
Research Process ◽  
Water Soluble ◽  
Capital Investments ◽  
Long Distance ◽  
Wood Material ◽  
Pre Treatment ◽  
The Moment

Currently, the use of technogenic raw materials, including wood waste is one of the trends in manufacturing of building materials. This is due to the limited resources, the need for long-distance transportation, the high material and energy cost of some technological processes of raw materials extraction and processing. All of them greatly hamper the development of the industry of building materials based on natural resources. Different cellulosic fillers of vegetable origin are used for the production of wood-cement compositions at the moment. Organic fillers along with the inherent valuable properties have a number of specific properties which have a significant effect on the processes of structure formation, structural-mechanical and construction properties of composites. The results of the research of the processes of water-soluble components removal from raw wood material are presented in the article. Processing of raw wood material was carried out in water and weak alkali solution in the research process. It is established that additional ultrasonic treatment considerably intensifies and increases the extraction of water-soluble sugars. The conducted research shows the possibility of improving the composite wood materials manufacturing technology with the aim of improving their performance without significant capital investments.

Behavior of Non-Shear-Strengthened UHPC Beams under Flexural Loading: Influence of Reinforcement Percentage

2021 ◽  
Vol 11 (23) ◽  
pp. 11346
Author(s):  
Mohammad Iqbal Khan ◽  
Galal Fares ◽  
Yassir M. Abbas ◽  
Fahad K. Alqahtani
Keyword(s):  
Crack Opening ◽  
Shear Cracks ◽  
Initial Stiffness ◽  
Moment Capacity ◽  
Reinforced Beams ◽  
Before And After ◽  
Cause Of Failure ◽  
Compressive And Flexural Strengths ◽  
The Moment ◽  
Cracking Pattern

In the present work, the structural responses of 12 UHPC beams to four-point loading conditions were experimentally and analytically studied. The inclusion of a fibrous system in the UHPC material increased its compressive and flexural strengths by 31.5% and 237.8%, respectively. Improved safety could be obtained by optimizing the tensile reinforcement ratio (ρ) for a UHPC beam. The slope of the moment–curvature before and after steel yielding was almost typical for all beams due to the inclusion of a hybrid fibrous system in the UHPC. Moreover, we concluded that as ρ increases, the deflection ductility exponentially increases. The cracking response of the UHPC beams demonstrated that increasing ρ notably decreases the crack opening width of the UHPC beams at the same service loading. The cracking pattern the beams showed that increasing the bar reinforcement percentages notably enhanced their initial stiffness and deformability. Moreover, the flexural cracks were the main cause of failure for all beams; however, flexure shear cracks were observed in moderately reinforced beams. The prediction efficiency of the proposed analytical model was established by performing a comparative study on the experimental and analytical ultimate moment capacity of the UHPC beams. For all beams, the percentage of the mean calculated moment capacity to the experimentally observed capacity approached 100%.

Flexural Resistance of Steel-Coconut Shell Concrete-Steel Composite Beam with Normal and J-Hook Shear Studs

2020 ◽  
Vol 12 (9) ◽  
Author(s):  
Lakshmi Thangasamy ◽  
◽  
Gunasekaran Kandasamy ◽  
Keyword(s):  
Concrete Strength ◽  
Steel Plates ◽  
Coconut Shell ◽  
Core Material ◽  
River Sand ◽  
Concrete Core ◽  
Conventional Concrete ◽  
Moment Capacity ◽  
The Moment ◽  
Core Concrete

Many researches on double skin sandwich having top and bottom steel plates and in between concrete core called as steel-concrete-steel (SCS) were carried out by them on this SCS type using with different materials. Yet, use of coconut shell concrete (CSC) as a core material on this SCS form construction and their results are very limited. Study investigated to use j-hook shear studs under flexure in the concept of steel-concrete-steel (SCS) in which the core concrete was CSC. To compare the results of CSC, the conventional concrete (CC) was also considered. To study the effect of quarry dust (QD) in its place of river sand (RS) was also taken. Hence four different mixes two without QD and two with QD both in CC and CSC was considered. The problem statement is to examine about partial and fully composite, moment capacity, deflection and ductility properties of CSC used SCS form of construction. Core concrete strength and the j-hook shear studs used are influences the moment carrying capacity of the SCS beams. Use of QD in its place of RS enhances the strength of concrete produced. Deflections predicted theoretically were compared with experimental results. The SCS beams showed good ductility behavior.

Growth of housing sector in India - application of Cost-effective Construction Technologies to reduce Greenhouse Gas Emission

2019 ◽  
Author(s):  
Nilanjan Sengupta
Keyword(s):  
Greenhouse Gas ◽  
Building Materials ◽  
Greenhouse Gas Emission ◽  
High Growth ◽  
Cost Effective ◽  
Construction Technology ◽  
Gas Emission ◽  
Sustainable Building ◽  
Skilled Manpower ◽  
Energy Consuming

Building construction sector can play a major role in reducing Greenhouse Gas emission through application of technologies aimed at reduction of use of building materials. Energy consumed during production of building materials and components plays a crucial role in creating environmental pollution. India is witnessing high growth in urban and rural housing, which needs more production of building materials. Permanent or semi-permanent type buildings which consume easily available conventional materials like brick, reinforced cement concrete etc. can be made Economic and Eco-friendly by lowering use of energy-consuming building materials through Cost-effective Construction Technologies. Buildings with Cost-effective Construction Technology can be designed within the parameters of the existing Indian Standards. Awareness generation among the users, proper technical and architectural guidance and easy availability of skilled manpower are of utmost importance for promotion of cost-effective technologies in India and to make them as the most acceptable case of sustainable building technologies both in terms of cost and environment.

scholarly journals Testing a Gypsum Composite Based on Raw Gypsum with a Direct Admixture of Paraffin and Polymer to Improve Thermal Properties

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3241
Author(s):  
Krzysztof Powała ◽  
Andrzej Obraniak ◽  
Dariusz Heim
Keyword(s):  
Thermal Conductivity ◽  
Heat Capacity ◽  
Thermal Properties ◽  
Phase Change ◽  
Large Scale ◽  
Building Materials ◽  
Residential Buildings ◽  
Energy Performance ◽  
Polymer Content ◽  
Volumetric Heat Capacity

The implemented new legal regulations regarding thermal comfort, the energy performance of residential buildings, and proecological requirements require the design of new building materials, the use of which will improve the thermal efficiency of newly built and renovated buildings. Therefore, many companies producing building materials strive to improve the properties of their products by reducing the weight of the materials, increasing their mechanical properties, and improving their insulating properties. Currently, there are solutions in phase-change materials (PCM) production technology, such as microencapsulation, but its application on a large scale is extremely costly. This paper presents a solution to the abovementioned problem through the creation and testing of a composite, i.e., a new mixture of gypsum, paraffin, and polymer, which can be used in the production of plasterboard. The presented solution uses a material (PCM) which improves the thermal properties of the composite by taking advantage of the phase-change phenomenon. The study analyzes the influence of polymer content in the total mass of a composite in relation to its thermal conductivity, volumetric heat capacity, and diffusivity. Based on the results contained in this article, the best solution appears to be a mixture with 0.1% polymer content. It is definitely visible in the tests which use drying, hardening time, and paraffin absorption. It differs slightly from the best result in the thermal conductivity test, while it is comparable in terms of volumetric heat capacity and differs slightly from the best result in the thermal diffusivity test.

scholarly journals The Improvement of Indoor Air Quality in Residential Buildings in Dubai, UAE

Buildings ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 250
Author(s):  
Chuloh Jung ◽  
Jihad Awad
Keyword(s):  
Computer Simulation ◽  
Air Quality ◽  
Indoor Air Quality ◽  
Indoor Air ◽  
Building Materials ◽  
Field Survey ◽  
Residential Buildings ◽  
Radon Gas ◽  
Volatile Organic ◽  
Residential Projects

Due to unprecedented urbanization, UAE had built many new residential projects with poor choices of material and ventilation. This social phenomenon is leading UAE to Sick Building Syndrome (SBS) faster than any other countries. The Dubai Municipality regulates the indoor air quality with strict stipulation, but the detailed regulations are still insufficient. The objective of this paper is to measure the indoor air quality of new residential projects in Dubai to suggest the improvement of the regulations for indoor air quality. As a methodology, a field survey was conducted to investigate the status of indoor air pollution in residential buildings. Based on the field survey data, lab experiments for building materials were conducted and a computer simulation on radon gas was conducted. The result had shown that radon gas was mainly detected in new townhouses and labor camp houses, and its concentration was found to exceed the standard. Volatile organic solvents (VOCs) and formaldehyde (CH2O) were mainly detected in showhouses and new townhouses, and the concentration distribution was about 10 times higher than that of outdoors. It was proven that emission concentration of radon gas from various building materials were detected, and the order was red clay, gypsum board, and concrete. Volatile organic solvents (VOCs) are mainly detected in oil paints and PVC floor and the radiation amount of all pollutants increased with temperature increase. In computer simulation, it was found that a new townhouse needs a grace period from 20 days to 6 months to lower the radon gas concentration by 2 pCi/L. This study will serve as a basic data to establish more detailed regulation for the building materials and improve the IAQ standards in Dubai.

scholarly journals The Effect of the Thermal Mass of the Building Envelope on Summer Overheating of Dwellings in a Temperate Climate

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4117
Author(s):  
Tadeusz Kuczyński ◽  
Anna Staszczuk ◽  
Piotr Ziembicki ◽  
Anna Paluszak
Keyword(s):  
Building Materials ◽  
Heat Waves ◽  
Residential Buildings ◽  
Building Envelope ◽  
Temperate Climate ◽  
Maximum Temperature ◽  
Thermal Mass ◽  
Occupant Behavior ◽  
Average Maximum ◽  
Night Ventilation

The main objective of this paper is to demonstrate the effectiveness of increasing the thermal capacity of a residential building by using traditional building materials to reduce the risk of its excessive overheating during intense heat waves in a temperate climate. An additional objective is to show that the use of this single passive measure significantly reduces the risk of overheating in daytime rooms, but also, though to a much lesser extent, in bedrooms. Increasing the thermal mass of the room from light to a medium heavy reduced the average maximum daily temperature by 2.2K during the first heat wave and by 2.6K during the other two heat waves. The use of very heavy construction further reduced the average maximum temperature for the heat waves analyzed by 1.4K, 1.2K and 1.7K, respectively, giving a total possible reduction in maximum daily temperatures in the range of 3.6 °C, 3.8 °C and 4.3 °C. A discussion of the influence of occupant behavior on the use of night ventilation and external blinds was carried out, finding a significant effect on the effectiveness of the use of both methods. The results of the study suggest that in temperate European countries, preserving residential construction methods with heavy envelopes and partitions could significantly reduce the risk of overheating in residential buildings over the next few decades, without the need for night ventilation or external blinds, whose effectiveness is highly dependent on individual occupant behavior.

scholarly journals Energy Retrofitting Opportunities Using Renewable Materials—Comparative Analysis of the Current Frameworks in Bosnia-Herzegovina and Slovenia

2021 ◽  
Vol 13 (2) ◽  
pp. 603
Author(s):  
Darija Gajić ◽  
Slobodan Peulić ◽  
Tim Mavrič ◽  
Anna Sandak ◽  
Črtomir Tavzes ◽  
...  
Keyword(s):  
Developing Countries ◽  
Residential Buildings ◽  
Cost Effective ◽  
Primary Energy ◽  
Low Carbon ◽  
Resource Exploitation ◽  
Renewable Materials ◽  
Building Stock ◽  
Low Carbon Economy ◽  
Eu Member States

Sustainable approaches for retrofitting buildings for energy efficiency are becoming necessary in a time when the building sector is the largest energy consumer. Retrofitting building stock is effective for reducing global energy consumption and decreasing resource exploitation. Less developed EU member states and neighboring developing countries show reluctance towards healthy and renewable materials. Implementation of sustainable materials for energy retrofitting is slowed down due to gaps in legislation and effective strategic programs, availability of bio-based materials, lack of knowledge regarding use and maintenance of renewable products, and marketing lobbies. Use of bio-based materials in refurbishment is important due to their negative or low global warming potential (GWP), low primary energy (PEI) need for production, cost-effective benefits, and recycling/reuse potential. Role of environmentally friendly solutions and low-carbon economy growth is particularly relevant in developing countries, such as Bosnia-Herzegovina, that cannot afford innovative energy recovery systems, yet possess a significant amount of poorly managed building stock. This research aims to analyze frameworks regarding retrofitting of residential buildings in Bosnia-Herzegovina and Slovenia. The analysis tackles indirect causes, studies the legal background, and examines strategic frameworks; thus, it indicates potential barriers for implementation of recommended retrofitting solutions based on renewable materials.

Development of a numerical approach to assess the effect of coupled heat and moisture transfer on energy consumption of residential buildings in Moroccan context

2021 ◽  
pp. 174425912110560
Author(s):  
Yassine Chbani Idrissi ◽  
Rafik Belarbi ◽  
Mohammed Yacine Ferroukhi ◽  
M’barek Feddaoui ◽  
Driss Agliz
Keyword(s):  
Energy Consumption ◽  
Building Materials ◽  
Moisture Transfer ◽  
Residential Buildings ◽  
Building Design ◽  
Energy Performance ◽  
Climatic Conditions ◽  
Heat And Moisture Transfer ◽  
Coupled Heat And Moisture ◽  
Heat And Moisture

Hygrothermal properties of building materials, climatic conditions and energy performance are interrelated and have to be considered simultaneously as part of an optimised building design. In this paper, a new approach to evaluate the energy consumption of residential buildings in Morocco is presented. This approach is based on the effect of coupled heat and moisture transfer in typical residential buildings and on their responses to the varied climatic conditions encountered in the country. This approach allows us to evaluate with better accuracy the response of building energy performance and the indoor comfort of building occupants. Annual energy consumption, cooling and heating energy requirements were estimated considering the six climatic zones of Morocco. Based on the results, terms related to coupled heat and moisture transfer can effectively correct the existing energy consumption calculations of the six zones of Morocco, which currently do not consider energy consumption due to coupled heat and moisture transfer.

Sign in / Sign up

Export Citation Format

Share Document