scholarly journals Research of Flow Field of Alkaline/Surfactant/Polymer Solution in the Annular Depressurization Slot by PIV Experiment

2018 ◽  
Vol 2018 ◽  
pp. 1-7
Author(s):  
Cheng Fu ◽  
Tingting Zhu ◽  
Di Wu ◽  
Ying Wang ◽  
Bin Huang
Keyword(s):  
Flow Field ◽  
Velocity Distribution ◽  
Internal Flow ◽  
Outer Wall ◽  
Vortex Center ◽  
Experimental Conditions ◽  
Molecular Weights ◽  
New Research ◽  
Principle Of Similarity ◽  
Alkaline Surfactant Polymer

In order to study the flow field changes of ASP (alkaline/surfactant/polymer) solutions with different molecular weights and flow rates when flowing through the annular depressurization slot in the laboratory, the annulus pipeline model was designed based on the principle of similarity. The particle image velocimetry (PIV) system was used to continuously capture the transient images when the ASP solution flows in the model under different experimental conditions. Tecplot software was used to analyze and process the nephrograms of the velocity distribution of ASP solution when flowing through the partially pressured injection tool with different depressurization slots. The experimental results showed that the vortex occurred at the bottom of the depressurization slots; the greater the flow rate, the closer the vortex center to the outer wall; higher molecular weight of the polymer in the ASP solution caused larger velocity gradient towards the wall. The number of the slots has no significant effect on the position of the vortex. This experiment provides a new research method for the velocity distribution of the internal flow field in the partially pressured injection tool.

scholarly journals Numerical Simulation and Experimental Study on Flow Field in a Swirl Nozzle

2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Yicheng Sun ◽  
Yufan Fu ◽  
Baohui Chen ◽  
Jiaxing Lu ◽  
Wanquan Deng
Keyword(s):  
Flow Field ◽  
Velocity Distribution ◽  
Flow Characteristics ◽  
Internal Flow ◽  
Low Pressure ◽  
External Flow ◽  
Droplet Velocity ◽  
Inlet Pressure ◽  
Outlet Section ◽  
Local Pressure

In order to study the internal flow characteristics and external droplet velocity distribution characteristics of the swirl nozzle, the following methods were used: numerical simulations were used to study the internal flow characteristics of a swirl nozzle and phase Doppler particle velocimetry was used to determine the corresponding external droplet velocity distribution under medium and low pressure conditions. The distributions of pressure and water velocity inside the nozzle were obtained. Meanwhile, the velocities of droplets outside the nozzle in different sections were discussed. The results show that the flow rate in the swirl nozzle increases with the increase in inlet pressure, and the local pressure in the region decreases because of the excessive velocity at the internal outlet section of the swirl nozzle, resulting in cavitation. The experimental results show that under an external flow field, the minimum droplet velocity occurs in the axial direction; starting from the axis, the velocity first increases and then decreases along the radial direction. Swirling motion inside the nozzle and velocity variations in the external flow field occur under medium and low pressure conditions. The relationship between the inlet pressure and the distributions of water droplets’ velocities was established, which provides a reference for the research and development of the swirl nozzle.

Characteristic Analysis for the Internal Flow Field of CVT Torque Converter Based on FLUENT

2013 ◽  
Vol 427-429 ◽  
pp. 29-32
Author(s):  
Jin Gang Liu ◽  
Le Xiong ◽  
Yuan Qiang Tan
Keyword(s):  
Flow Field ◽  
Velocity Distribution ◽  
Channel Model ◽  
Internal Flow ◽  
Torque Converter ◽  
Characteristic Analysis ◽  
Design And Optimization ◽  
Distribution Of Flow

According to the issue of CVT torque converter internal flow field such as the complexity and not easy to calculate, the channel model of torque converter is established by UG, the grid of channel model is generated by GAMBIT, the internal flow field of torque converter is simulated based on FLUENT while the pressure and velocity distribution of flow field are calculated under three different conditions. The results show that analyzing the flow field of torque converter by FLUENT has certain guiding significance for the design and optimization of torque converter.

Numerical Simulation of Internal Flow Field in Mixed Flow Fan

2013 ◽  
Vol 860-863 ◽  
pp. 1589-1593
Author(s):  
Yan Zhao Zhai ◽  
Hong Ming Zhang
Keyword(s):  
Numerical Simulation ◽  
Flow Field ◽  
Velocity Distribution ◽  
Pressure Distribution ◽  
Three Dimensional ◽  
Internal Flow ◽  
Field Structure ◽  
Mixed Flow ◽  
Flow Phenomenon ◽  
Impeller Outlet

The numerical simulation of internal flow field of a mixed-flow fan was carried out on the star-CD platform. Three-dimensional steady turbulent flow is calculated using the standard k-ɛ turbulence model, and the pressure distribution, velocity distribution and other important flow phenomenon inside the fan are obtained. The number of meshes has important influence on the result, meanwhile, fan inlet, impeller, outlet interact with each other. The results of numerical simulation can accurately analyze the fan flow field. The results of numerical simulation can accurately analyze the fan flow field structure, and provide guidance for further optimization and improvement of the fan.

scholarly journals Internal Flow Optimization in a Complex Profile Extrusion Die Using Flow Restrictors and Flow Separators

2021 ◽  
Author(s):  
Jingyang Xing ◽  
Majed Alsarheed ◽  
Animesh Kundu ◽  
John P. Coulter
Keyword(s):  
Velocity Distribution ◽  
Cross Flow ◽  
Internal Flow ◽  
Outer Wall ◽  
Die Design ◽  
Cross Sectional ◽  
Polymer Flow ◽  
Extrusion Dies ◽  
Flow Imbalance ◽  
Distinct Features

Abstract The control of flow balance at the die exit is the key for successful extrusion of polymers. The complex cross-sectional variation in real-world hollow extrusion profiles intrinsically promotes flow imbalance in the die cavity. Special considerations are required for designing extrusion dies for such profiles. The die design for a complex door frame profile was computationally optimized in this study with the aid of a commercially available software package. The velocity distribution at the die exit, post-die extrudate deformation, temperature distribution, and pressure distribution of a traditional die was investigated in detail and found to be inadequate. A modified die incorporated three distinct features, flow restrictors, flow separators and approach angle of the torpedoes, to achieve a balanced and uniform velocity at the die exit. The flow restrictors and flow separators were added in the pre-parallel zone. Flow restrictors were added on top and bottom of the torpedoes to increase the restriction on polymer flow. A unique inclined flow restrictor was introduced to achieve uniform internal melt flow. Flow separators were added at junctions of outer wall and inner vertical walls to separate the polymer flow into different sections and minimize cross flow between these sections. The addition of these features proved to be highly effective for balancing the velocity distribution at the die exit. The combination of 3-D modeling and simulation is an effective cost and time efficient approach for optimizing complex die designs before manufacturing.

Numerical Simulation and Analysis of 3-D Internal Flow Field in Mechanical Turbulent Coal Pulverizer

2012 ◽  
Vol 170-173 ◽  
pp. 3300-3303
Author(s):  
Wei Lv ◽  
Zhi Yue Yao ◽  
De Li Zhang ◽  
Xin Hai Wang ◽  
Xiao Nan Zhang ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Numerical Simulation ◽  
Flow Field ◽  
Velocity Distribution ◽  
Secondary Flow ◽  
Eddy Current ◽  
Gas Flow ◽  
Internal Flow ◽  
Flow Phenomenon ◽  
Computation Fluid Dynamics

In this paper, the computation fluid dynamics ( CFD) software FLUENT is applied to analyze the internal 3-D gas flow of the mechanical turbulent coal pulverizer impeller, especially on the pressure and velocity distribution. Eddy current-wake and secondary flow phenomenon is found in the pulverizer.

THE INTERNAL FLOW FIELD ASSOCIATED WITH YAWED THREE-DIMENSIONAL RECTANGULAR CAVITIES

2000 ◽  
Vol 7 (3) ◽  
pp. 14
Author(s):  
Eric Savory ◽  
Norman Toy ◽  
Shiki Okamoto ◽  
Yoko Yamanishi
Keyword(s):  
Flow Field ◽  
Three Dimensional ◽  
Internal Flow

scholarly journals Influence of wall roughness on cavitation performance of centrifugal pump

2021 ◽  
Vol 43 (6) ◽  
Author(s):  
Weihui Xu ◽  
Xiaoke He ◽  
Xiao Hou ◽  
Zhihao Huang ◽  
Weishu Wang
Keyword(s):  
Flow Field ◽  
Centrifugal Pump ◽  
Internal Flow ◽  
Wall Roughness ◽  
Blade Surface ◽  
Centrifugal Pumps ◽  
Three Dimensional Model ◽  
Cavitation Inception ◽  
Cavitation Performance ◽  
Critical Cavitation

AbstractCavitation is a phenomenon that occurs easily during rotation of fluid machinery and can decrease the performance of a pump, thereby resulting in damage to flow passage components. To study the influence of wall roughness on the cavitation performance of a centrifugal pump, a three-dimensional model of internal flow field of a centrifugal pump was constructed and a numerical simulation of cavitation in the flow field was conducted with ANSYS CFX software based on the Reynolds normalization group k-epsilon turbulence model and Zwart cavitation model. The cavitation can be further divided into four stages: cavitation inception, cavitation development, critical cavitation, and fracture cavitation. Influencing laws of wall roughness of the blade surface on the cavitation performance of a centrifugal pump were analyzed. Research results demonstrate that in the design process of centrifugal pumps, decreasing the wall roughness appropriately during the cavitation development and critical cavitation is important to effectively improve the cavitation performance of pumps. Moreover, a number of nucleation sites on the blade surface increase with the increase in wall roughness, thereby expanding the low-pressure area of the blade. Research conclusions can provide theoretical references to improve cavitation performance and optimize the structural design of the pump.

scholarly journals Analysis of the Influence of Different Bionic Structures on the Noise Reduction Performance of the Centrifugal Pump

Sensors ◽  
2021 ◽  
Vol 21 (3) ◽  
pp. 886
Author(s):  
Cui Dai ◽  
Chao Guo ◽  
Yiping Chen ◽  
Liang Dong ◽  
Houlin Liu
Keyword(s):  
Flow Field ◽  
Noise Reduction ◽  
Centrifugal Pump ◽  
Great Influence ◽  
Frequency Doubling ◽  
Sound Field ◽  
Internal Flow ◽  
Test System ◽  
Centrifugal Pumps ◽  
External Characteristics

The strong noise generated during the operation of the centrifugal pump harms the pump group and people. In order to decrease the noise of the centrifugal pump, a specific speed of 117.3 of the centrifugal pump is chosen as a research object. The bionic modification of centrifugal pump blades is carried out to explore the influence of different bionic structures on the noise reduction performance of centrifugal pumps. The internal flow field and internal sound field of bionic blades are studied by numerical calculation and test methods. The test is carried out on a closed pump test platform which includes external characteristics and a flow noise test system. The effects of two different bionic structures on the external characteristics, acoustic amplitude–frequency characteristics and flow field structure of a centrifugal pump, are analyzed. The results show that the pit structure has little influence on the external characteristic parameters, while the sawtooth structure has a relatively great influence. The noise reduction effect of the pit structure is aimed at the wide-band noise, while the sawtooth structure is aimed at the discrete noise of the blade-passing frequency (BPF) and its frequency doubling. The noise reduction ability of the sawtooth structure is not suitable for high-frequency bands.

Visualization of Internal Flow Field of Propeller Fan

2017 ◽  
Author(s):  
Takaya Onishi ◽  
H. Sato ◽  
M. Hayakawa ◽  
Y. Kawata
Keyword(s):  
Flow Field ◽  
High Performance ◽  
Laser Light ◽  
Internal Flow ◽  
Light Sheet ◽  
Tip Vortex ◽  
Laser Light Sheet ◽  
Blade Surface ◽  
Similar Tendency ◽  
Flow Phenomena

Propeller fans are required not only to have high performance but also to be extremely quiet. The internal flow field of ventilation propeller fans is even more complicated because they usually have a very peculiar configuration with protruding blades upstream. Thus, many kinds of internal vortices yield which cause noise and their cause and countermeasures are needed to be clarified. The purposes of this paper are to visualize the internal flow of the propeller fan from the static and rotating frame of reference. The internal flow visualization measured from the static frame gives approximately the scale of the tip vortex. The visualization from the rotating coordinate system yields a better understanding of the flow phenomena occurring at the specific blade. The experiment is implemented by using a small camera mounted on the shaft of the fan and rotated it to capture the behavior of the vortices using a laser light sheet to irradiate the blade surface. Hence, the flow field of the specific blade could be understood to some extent. The visualized results are compared with the CFD results and these results show a similar tendency about the generation point and developing process of the tip vortex. In addition, it is found that the noise measurement result is relevant to the effect of tip vortex from the visualization result.

Research on CFD Simulation of the Cement Slurry Mixer

2012 ◽  
Vol 621 ◽  
pp. 196-199
Author(s):  
Shui Ping LI ◽  
Ya Li Yuan ◽  
Lu Gang Shi
Keyword(s):  
Flow Field ◽  
High Performance ◽  
Cfd Simulation ◽  
Structural Parameters ◽  
Internal Flow ◽  
Simulation Method ◽  
Cement Slurry ◽  
Fluid Machinery ◽  
Computational Fluid Dynamics Cfd ◽  
Machinery Design

Numerical simulation method of the internal flow field of fluid machinery has become an important technology in the study of fluid machinery design. In order to obtain a high-performance cement slurry mixer, computational fluid dynamics (CFD) techniques are used to simulate the flow field in the mixer, and the simulation results are studied. According to the analysis results, the structural parameters of the mixer are modified. The results show the mixer under the revised parameters meet the design requirements well. So CFD analysis method can shorten design period and provide valuable theoretical guidance for the design of fluid machinery.

Sign in / Sign up

Export Citation Format

Share Document