scholarly journals Synthesis of CIS (CuInSe2) Based Materials for Solar Applications

2018 ◽  
Vol 2018 ◽  
pp. 1-7 ◽  
Author(s):  
Ali Murat Soydan ◽  
Pinar Yilmaz ◽  
Bahadır Tunaboylu
Keyword(s):  
Oleic Acid ◽  
Organic Solvents ◽  
Copper Indium Diselenide ◽  
Step Process ◽  
Copper Indium ◽  
Time In Literature ◽  
One Step ◽  
First Time ◽  
H 20 ◽  
Solar Applications

Nanopowders of copper indium diselenide were produced with five different organic solvents: ethylenediamine, triethanolamine, oleylamine, oleic acid, and polyetheramine. We successfully synthesized pure CIS nanopowders at a temperature of 240°C at three different durations of 10 h, 20 h, and 40 h with a one-step process. This shorter time method offers important cost advantages in manufacturing. Polyetheramine and oleic acid were used for the first time in literature for CIS synthesis in an autoclave.

scholarly journals A Greener Enzymatic Oligoesterification of Biobased Renewable Synthons

2021 ◽  
Author(s):  
Juan Villavicencio ◽  
Ferley Orozco ◽  
Ricardo Benitez ◽  
Jaime Martin ◽  
Giovanni Rojas
Keyword(s):  
Molecular Weight ◽  
Molar Mass ◽  
Gel Permeation Chromatography ◽  
Scanning Calorimetry ◽  
Reaction Conditions ◽  
Step Process ◽  
Gel Permeation ◽  
One Step ◽  
First Time ◽  
Temperature Time

Polyesters of xylitol and succinic acid were prepared yielding from 70 to 75% by enzymecatalyzed esterification using a molar mass from 1:1 to 2:5 at 120 and 140 °C employing from 1 to 10% m/m of enzyme. Control over branching degree was achieved by tuning the reaction conditions (temperature, time, comonomer ratio, enzyme content). This one-step process from renewable starting materials avoids protection-deprotection techniques, as well as the use of toxic solvents by introducing limonene as solvent for polyesterification for the first time. All materials were structurally characterized by infrared (IR) and nuclear magnetic resonance (NMR)spectroscopy, their thermal properties were studied by differential scanning calorimetry (DSC)and thermogravimetric analysis (TGA), and the molecular weight of samples were obtained by gel-permeation chromatography (GPC).

High hydrophobic poly(lactic acid) foams impregnating one-step Si–F modified lignin nanoparticles for oil/organic solvents absorption

2021 ◽  
Vol 25 ◽  
pp. 100730
Author(s):  
Hui Ding ◽  
Weijun Yang ◽  
Wenhao Yu ◽  
Tianxi Liu ◽  
Haigang Wang ◽  
...  
Keyword(s):  
Lactic Acid ◽  
Organic Solvents ◽  
Poly Lactic Acid ◽  
One Step ◽  
Modified Lignin

scholarly journals Electrochromic Performance and Capacitor Performance of α-MoO3 Nanorods Fabricated by a One-Step Procedure

Coatings ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 783
Author(s):  
Ying Duan ◽  
Chen Wang ◽  
Jian Hao ◽  
Yang Jiao ◽  
Yanchao Xu ◽  
...  
Keyword(s):  
Growth Parameters ◽  
Average Diameter ◽  
Fast Response ◽  
Cycle Stability ◽  
Electrochromic Devices ◽  
Step Procedure ◽  
One Step ◽  
Supercapacitor Performance ◽  
First Time ◽  
Prepared Nanorods

In this paper, we propose for the first time the synthesis of α-MoO3 nanorods in a one-step procedure at mild temperatures. By changing the growth parameters, the microstructure and controllable morphology of the resulting products can be customized. The average diameter of the as-prepared nanorods is about 200 nm. The electrochromic and capacitance properties of the synthesized products were studied. The results show that the electrochromic properties of α-MoO3 nanorods at 550 nm have 67% high transmission contrast, good cycle stability and fast response time. The MoO3 nanorods also exhibit a stable supercapacitor performance with 98.5% capacitance retention after 10,000 cycles. Although current density varies sequentially, the nanostructure always exhibits a stable capacitor to maintain 100%. These results indicate the as-prepared MoO3 nanorods may be good candidates for applications in electrochromic devices and supercapacitors.

One-step synthesis of well-dispersed polypyrrole copolymers under gamma-ray irradiation

2021 ◽  
Vol 12 (5) ◽  
pp. 645-649
Author(s):  
Yu Gu ◽  
Yuqing Qiao ◽  
Yusen Meng ◽  
Ming Yu ◽  
Bowu Zhang ◽  
...  
Keyword(s):  
Room Temperature ◽  
Gamma Ray ◽  
Gamma Ray Irradiation ◽  
One Step ◽  
First Time

Herein, we report for the first time the synthesis of polypyrrole copolymers with good solvent-dispersibility under gamma-ray irradiation at room temperature in air.

Functionalized aluminum-catalyzed silicon nanowire formation and radial junction photovoltaic devices

Nanoscale ◽  
2021 ◽  
Author(s):  
Wipakorn Jevasuwan ◽  
Naoki Fukata
Keyword(s):  
Surface Modification ◽  
Solar Cells ◽  
Surface Defects ◽  
Silicon Nanowire ◽  
Photovoltaic Devices ◽  
Step Process ◽  
One Step ◽  
Length Reduction

Vertical Al-catalyzed SiNW arrays with shaped surfaces were synthesized by a one-step process and NW-based solar cells were demonstrated with optimized NW surface defects through surface modification and length reduction.

scholarly journals Mineralogy and Geochemistry of Ultramafic Rocks from Rachoni Magnesite Mine, Gerakini (Chalkidiki, Northern Greece)

Minerals ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 934
Author(s):  
Evangelos Tzamos ◽  
Micol Bussolesi ◽  
Giovanni Grieco ◽  
Pietro Marescotti ◽  
Laura Crispini ◽  
...  
Keyword(s):  
Raw Materials ◽  
Mining Area ◽  
Ultramafic Rocks ◽  
Northern Greece ◽  
Icp Ms ◽  
Time In Literature ◽  
History Of ◽  
First Time ◽  
The Eu

The importance of magnesite for the EU economy and industry is very high, making the understanding of their genesis for the exploration for new deposits a priority for the raw materials scientific community. In this direction, the study of the magnesite-hosting ultramafic rocks can be proved very useful. For the present study, ultramafic rock samples were collected from the magnesite ore-hosting ophiolite of the Gerakini mining area (Chalkidiki, Greece) to investigate the consecutive alteration events of the rocks which led to the metallogenesis of the significant magnesite ores of the area. All samples were subjected to a series of analytical methods for the determination of their mineralogical and geochemical characteristics: optical microscopy, XRD, SEM, EMPA, ICP–MS/OES and CIPW normalization. The results of these analyses revealed that the ultramafic rocks of the area have not only all been subjected to serpentinization, but these rocks have also undergone carbonation, silification and clay alteration. The latter events are attributed to the circulation of CO2-rich fluids responsible for the formation of the magnesite ores and locally, the further alteration of the serpentinites into listvenites. The current mineralogy of these rocks was found to be linked to one or more alteration event that took place, thus a significant contribution to the metallo- and petrogenetic history of the Gerakini ophiolite has been made. Furthermore, for the first time in literature, Fe inclusions in olivines from Greece were reported.

Sign in / Sign up

Export Citation Format

Share Document