scholarly journals Effects of Single and Hybrid Steel Fiber Lengths and Fiber Contents on the Mechanical Properties of High-Strength Fiber-Reinforced Concrete

2018 ◽  
Vol 2018 ◽  
pp. 1-14 ◽  
Author(s):  
Kyoung-Chul Kim ◽  
In-Hwan Yang ◽  
Changbin Joh
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Elastic Modulus ◽  
Steel Fiber ◽  
High Strength ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Experimental Parameters ◽  
High Strength Fiber

This paper describes an experimental study on the mechanical properties of high-strength fiber-reinforced concrete (HSFRC). The experimental parameters included the content and length of the steel fiber as well as the use of either a single-type fiber or hybrid steel fibers. The steel fiber contents were 1.0, 1.5, and 2.0% based on the volume of HSFRC, and the steel fiber lengths were 13, 16.5, and 19.5 mm. In addition, hybrid steel fibers incorporating steel fibers of different lengths were used. Compression tests and crack mouth opening displacement tests were performed for each HSFRC mixture with different experimental parameters. The mechanical properties of the HSFRC, such as compressive strength, elastic modulus, and tensile strength, increased with the steel fiber content. The mechanical property results of the HSFRC mixture using a single fiber length of 13 mm were greater than the results of the other mixtures. The compressive strength, elastic modulus, and tensile strength of the HSFRC mixture with hybrid steel fibers were similar to those of the mixtures with a single length of steel fiber. Additionally, based on the test results of the material properties, equations for predicting the elastic modulus and tensile strength of the HSFRC were suggested; the predictions using the proposed formula closely agreed with the experimental results.

Effect of combined drink cans and steel fibers on the impact resistance and mechanical properties of concrete

2020 ◽  
Vol 14 (2) ◽  
pp. 6734-6742
Author(s):  
A. Syamsir ◽  
S. M. Mubin ◽  
N. M. Nor ◽  
V. Anggraini ◽  
S. Nagappan ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Reinforced Concrete ◽  
Impact Resistance ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Fiber Reinforced ◽  
Indirect Tensile ◽  
The Impact

This study investigated the combine effect of 0.2 % drink cans and steel fibers with volume fractions of 0%, 0.5%, 1%, 1.5%, 2%, 2.5% and 3% to the mechanical properties and impact resistance of concrete. Hooked-end steel fiber with 30 mm and 0.75 mm length and diameter, respectively was selected for this study.  The drinks cans fiber were twisted manually in order to increase friction between fiber and concrete. The results of the experiment showed that the combination of steel fibers and drink cans fibers improved the strength performance of concrete, especially the compressive strength, flexural strength and indirect tensile strength. The results of the experiment showed that the combination of steel fibers and drink cans fibers improved the compressive strength, flexural strength and indirect tensile strength by 2.3, 7, and 2 times as compare to batch 1, respectively. Moreover, the impact resistance of fiber reinforced concrete has increase by 7 times as compared to non-fiber concretes. Moreover, the impact resistance of fiber reinforced concrete consistently gave better results as compared to non-fiber concretes. The fiber reinforced concrete turned more ductile as the dosage of fibers was increased and ductility started to decrease slightly after optimum fiber dosage was reached. It was found that concrete with combination of 2% steel and 0.2% drink cans fibers showed the highest compressive, split tensile, flexural as well as impact strength.    

Compressive Strength and Splitting Tensile Strength of Steel Fiber Reinforced Ultra High Strength Concrete (SFRC)

2010 ◽  
Vol 34-35 ◽  
pp. 1441-1444 ◽  
Author(s):  
Ju Zhang ◽  
Chang Wang Yan ◽  
Jin Qing Jia
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
High Strength Concrete ◽  
Steel Fiber ◽  
Volume Fraction ◽  
High Strength ◽  
Splitting Tensile Strength ◽  
Steel Fibers ◽  
Fiber Reinforced ◽  
Strength Concrete

This paper investigates the compressive strength and splitting tensile strength of ultra high strength concrete containing steel fiber. The steel fibers were added at the volume fractions of 0%, 0.5%, 0.75%, 1.0% and 1.5%. The compressive strength of the steel fiber reinforced ultra high strength concrete (SFRC) reached a maximum at 0.75% volume fraction, being a 15.5% improvement over the UHSC. The splitting tensile strength of the SFRC improved with increasing the volume fraction, achieving 91.9% improvements at 1.5% volume fraction. Strength models were established to predict the compressive and splitting tensile strengths of the SFRC. The models give predictions matching the measurements. Conclusions can be drawn that the marked brittleness with low tensile strength and strain capacities of ultra high strength concrete (UHSC) can be overcome by the addition of steel fibers.

scholarly journals Effects of Reinforcing Fiber Strength on Mechanical Properties of High-Strength Concrete

Fibers ◽  
2019 ◽  
Vol 7 (10) ◽  
pp. 93 ◽  
Author(s):  
Yun ◽  
Lim ◽  
Choi
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
High Strength Concrete ◽  
Steel Fiber ◽  
Fiber Strength ◽  
High Strength ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Steel Fiber Reinforced Concrete ◽  
Strength Concrete

: This paper investigates the effects of the tensile strength of steel fiber on the mechanical properties of steel fiber-reinforced high-strength concrete. Two levels of steel fiber tensile strength (1100 MPa and 1600 MPa) and two steel fiber contents (0.38% and 0.75%) were used to test the compression, flexure, and direct shear performance of steel fiber-reinforced high-strength concrete specimens. The aspect ratio for the steel fiber was fixed at 80 and the design compressive strength of neat concrete was set at 70 MPa to match that of high-strength concrete. The performance of the steel fiber-reinforced concrete that contained high-strength steel fiber was superior to that which contained normal-strength steel fiber. In terms of flexural performance in particular, the tensile strength of steel fiber can better indicate performance than the steel fiber mixing ratio. In addition, a compression prediction model is proposed to evaluate compression toughness, and the model results are compared. The predictive model can anticipate the behavior after the maximum load.

Effect of Fiber on Mechanical Properties and Fire Resistance of C100 Ultra High Strength Concrete

2014 ◽  
Vol 629-630 ◽  
pp. 245-251
Author(s):  
Liang Huo ◽  
Xi Qiang Lin ◽  
Guo You Li ◽  
Tao Zhang
Keyword(s):  
Mechanical Properties ◽  
Elastic Modulus ◽  
Reinforced Concrete ◽  
Fire Resistance ◽  
Elevated Temperatures ◽  
Steel Fiber ◽  
High Strength ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Fiber Concrete

It used conventional techniques and materials prepared high strength fiber reinforced concrete whose strength class is above C100 and it studied the effect of fiber content on the mechanical properties and elastic modulus. It also studied the fire resistance of fiber reinforced concrete. Results suggest that the strength of 28d concrete is above 100MPa and the highest strength is 126.4MPa. Under the same ratio conditions, the greater the volume content of steel fiber concrete flexural strength, the splitting tensile strength is higher. The steel fiber volume only affect elastic modulus of concrete little. When it heats to 300 °C, the no fiber concrete comminuted burst while the fiber concrete does not damaged at elevated temperatures up to 300 °C and continue to heat up, the crushing damage occurs at about 460 °C. Has not been damaged concrete specimens at 300 °C, the quality have emerged about 3% decline, while the compressive strength increased by 35%-52%, the highest strength reached 180.3MPa.

scholarly journals HYBRID FIBER REINFORCED CONCRETE WITH POZZOLANIC MATERIALS

2020 ◽  
Vol 1 (1) ◽  
pp. 16-24
Author(s):  
Saeid Golizadeh Fard
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Bending Strength ◽  
Steel Fiber ◽  
Low Cost ◽  
Fiber Reinforced Concrete ◽  
Steel Fibers ◽  
Fiber Reinforced ◽  
Micro Cracks ◽  
Pozzolanic Materials

This paper investigates the possibility of combining steel fibers with different weight percentages along with their functions in increasing compressive strength, indirect tensile strength and bending strength. It`s been considered an important economic issue for a long time the ability to service and increase the load-bearing capacity of structural materials. Concrete as a widely used structural material is widely used today. Despite its remarkable properties including high ductility, high durability, longevity, availability and low cost, concrete is a brittle material and performs extremely poor under flexural and tensile loads. In general, the breakdown and destruction of concrete is strongly dependent on the formation of cracks and micro-cracks. As the loading increases, the micro-cracks interconnect and form cracks. In order to address this problem and to create homogeneous conditions, a series of thin filaments has been used throughout the concrete in recent decades; They are called fibers. Steel fiber is one of the most commonly used fibers in concrete. In this study, the compressive strength of concrete was investigated which in some specimens reinforced with steel and containing pozzolanic materials, the compressive strength of control samples increased with the use of fiber etc. In the present study, the flexural and tensile strength of steel fiber reinforced specimens were investigated. According to the results, flexural strength increases with increase in steel fibers. The designs contain 1%, 1.5% and 2% of the Dramix hooked steel fibers used in the research. By reinforcing the specimens with steel fibers, the behavior of tensile concrete is much more flexible than that of non-steel specimens.

Mechanical Properties of Hybrid Nylon-Steel- and Steel-Fibre-Reinforced High Strength Concrete at Low Fibre Volume Fraction

2010 ◽  
Vol 168-170 ◽  
pp. 1704-1707 ◽  
Author(s):  
Ming Kun Yew ◽  
Othman Ismail
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Reinforced Concrete ◽  
High Strength Concrete ◽  
Steel Fiber ◽  
Volume Fraction ◽  
High Strength ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Steel Fiber Reinforced Concrete

The mechanical properties of hybrid nylon-steel-fiber-reinforced concrete were investigated in comparison to that of the steel-fiber-reinforced concrete, at the same volume fraction (0.5%). The combining of fibers, often called hybridization is investigated in this paper for a very high strength concrete of an average compressive strength of 105 MPa. Test results showed that fibers when used in a hybrid nylon-steel fibers reinforced concrete form could result in superior composite performance compared to steel-fiber-reinforced concrete. The basic property of the hybridized material that was evaluated and analyzed extensively was the modulus of rupture (MOR) and splitting tensile while the compressive strength was only slightly decreased compared to single steel fiber reinforced concrete. There is a synergy effect in the hybrid fibers system.

Experimental Study on Mechanical Properties of Steel Fiber Reinforced High Performance Concrete

2013 ◽  
Vol 859 ◽  
pp. 56-59 ◽  
Author(s):  
Yong Qiang Ma
Keyword(s):  
Mechanical Properties ◽  
Mechanical Property ◽  
Compressive Strength ◽  
Elastic Modulus ◽  
Flexural Strength ◽  
High Performance ◽  
Steel Fiber ◽  
High Performance Concrete ◽  
Steel Fibers ◽  
Fiber Reinforced

A large number of experiments have been carried out in this study to reveal the effect of the steel fiber dosage on the mechanical properties of HPC (high performance concrete). The mechanical property includes compressive strength, elastic modulus and flexural strength. The results indicate that the addition of steel fiber increase the compressive strength, elastic modulus and flexural strength of HPC. When the steel fiber dosage is less than 2%, these mechanical property parameters are increasing gradually with the increase of steel fiber dosage, while these parameters begin to decrease when the steel fiber dosage is more than 2%. With the development of HPC, the application of steel fibers in HPC becomes more and more popular. In the actual construction of steel fiber reinforced HPC, the dosage of steel fiber should be controlled strictly in order to ensure that the steel fibers can perform their best improvement on high performance concrete.

scholarly journals STUDY ON MECHANICAL PROPERTIES OF HIGH STRENGTH CONCRETE WITH SILICA FUME, FLYASH AND STEEL FIBER

2021 ◽  
Vol 6 (1) ◽  
Author(s):  
Atul Ranjan
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Fly Ash ◽  
Construction Industry ◽  
Silica Fume ◽  
Steel Fiber ◽  
High Strength ◽  
Steel Fibers ◽  
Split Tensile Strength ◽  
To Come

In this growing world there has always been a strong competition in the market amongst industries in term of economy, profits, shares etc. one such industry is construction industry where concrete is the key building substance which is in limelight. Since past, we have seen much advancement in concrete because of the research which is in progress on concrete to come out with a product which should be economical and strong enough to resist all kind of loads. In this thesis, fly ash and silica fume are used as a replacement for cement along with steel fibers by volume of concrete. Here, fly ash is replaced by 0%, 15%, 30% and silica fume is replaced by 0%, 6%, 12% and 18% for cement. Initially, a set of concrete specimens were casted with 0%, 15%, 30% fly ash and 0%, 6%, 12% and 18% silica fume with 0% addition of steel fibers and tested for compressive, flexural and split tensile strength. Secondly, another set of concrete specimens were casted with 0%, 15%, 30% fly ash and 0%, 6%, 12% and 18% silica fume with 0.5% addition of steel fibers and tested for the same. Similarly, another set of samples were casted 0%, 15%, 30% fly ash and 0%, 6%, 12% and 18% silica fume with 1% addition of steel fibers and tested to determine the mechanical properties of concrete. And it was observed that maximum compressive, flexural and split tensile strength was attained at 15% fly ash and 12% silica fume with 1% steel fiber

scholarly journals Evaluation of Mix Proportions and Mechanical Properties of Normal and High-Strength Fibers Concrete

2019 ◽  
Vol 9 (2) ◽  
pp. 202-207
Author(s):  
Imad R. Mustafa ◽  
Omar Q. Aziz
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Silica Fume ◽  
High Strength Concrete ◽  
Steel Fiber ◽  
High Strength ◽  
Splitting Tensile Strength ◽  
Strength Concrete

An experimental program is carried out to evaluate the mix design and mechanical properties of normal strength concrete (NSC) grade 40 MPa and high-strength concrete grade 60 and 80 MPa. The study investigates using silica fume to produce high-strength concrete grade 80 MPa and highlights the influence of adding steel fiber on the mechanical properties of normal and high-strength concrete. For NSC, the compressive strength is found at 7 and 28 days. While for higher strength concrete, the compressive strength is determined at 7, 28, and 56 days. The splitting tensile strength and flexural strength is determined at 28 days. Based on results, the specimens with 14% silica fume are higher compressive strength than the specimens with 10% silica fume by 21.8%. The presence of steel fiber increased the compressive strength of normal and high-strength concrete at 7, 28, and 56 days curing ages with different percentage and the steel fiber has an important role in increasing the splitting tensile strength and flexural strength of normal and high-strength concrete.

Sign in / Sign up

Export Citation Format

Share Document