scholarly journals Potential Applications of Some Indigenous Bacteria Isolated from Polluted Areas in the Treatment of Brewery Effluents

2018 ◽  
Vol 2018 ◽  
pp. 1-13 ◽  
Author(s):  
Temesgen Oljira ◽  
Diriba Muleta ◽  
Mulissa Jida
Keyword(s):  
Large Scale ◽  
Waste Treatment ◽  
Oxygen Demand ◽  
Total Suspended Solid ◽  
Total Solid ◽  
Suspended Solid ◽  
Nitrogen And Phosphorus ◽  
Treated Effluent ◽  
Potential Applications ◽  
Solids Removal

Biological wastewater treatment is economically feasible and ecofriendly. This study was aimed at isolating bacteria from brewery wastes and evaluating their bioremediation potential as individual isolate and/or their consortium in reducing the pollutants of brewery effluents. A total of 40 bacterial isolates were recovered and of these the three best isolates were selected. The selected bacteria were identified to genus level by using morphological and biochemical characteristics. Accordingly, the isolates were identified as Aeromonas sp., Pseudomonas sp., and Bacillus sp. After 12 days of incubation, the removal efficiency of these three isolates and their combinations for biological oxygen demand and chemical oxygen demand varied from 73.55% to 94.85% and 76.78% to 93.25%, respectively. Total nitrogen and phosphorus removal was within the range of 54.43% to 77.21% and 41.80% to 78.18%, respectively. Total suspended solid, total solid, and total dissolved solids removal ranged from 66.74% to 90.3%, 54.69% to 88.5%, and 53.02% to 88.2%, respectively. The pH and electrical conductivity values ranged from 6.81 to 8.65 and 3.31 mS/cm to 3.67 mS/cm, respectively. The treated effluent increased Beta vulgaris seeds germination from 80% to 100%, with mean germination time of 3.1 to 5.2 days and seedlings length of 2.3 cm to 6.3 cm. Therefore, the development of this finding into a large scale offers an attractive technology for brewery waste treatment.

scholarly journals An Overview of River Side Pollutants and their Effects on Physico-Chemical Changes in Water Quality of River Halda, Bangladesh

2020 ◽  
Vol 32 (4) ◽  
pp. 827-834
Author(s):  
Muhammad Towhid Moula ◽  
Ranjit K. Nath ◽  
Mh. Mosfeka Chowdhury ◽  
Md. Abu Bakar Siddique
Keyword(s):  
Heavy Metals ◽  
Water Quality ◽  
Anthropogenic Activities ◽  
Oxygen Demand ◽  
Aquatic Organisms ◽  
Total Suspended Solid ◽  
Total Solid ◽  
Suspended Solid ◽  
Total Alkalinity ◽  
Physico Chemical

Halda is an important river of Bangladesh, is now polluted in different ways through industrial, agricultural, domestic and sewage disposal. Increased anthropogenic activities have increased the potential pollution of the river and excessive pollutants may be toxic to humans and aquatic fauna. Presence of heavy metals in the river water causes perilous impact on the aquatic organisms. Hence, regular monitoring of pollution levels in the river is indispensable. In this study, we discuss about physico-chemical assessments of water quality parameters viz. pH, dissolve oxygen (DO), biochemical oxygen demand (BOD), chemical oxygen demand (COD), total solid (TS), total suspended solid (TSS), total dissolved substance (TDS), total alkalinity, turbidity, salinity, electrical conductivity (EC), hardness, chloride and heavy metals in the water of Halda river during rainy and winter seasons, at different points; sources of pollutants in water and their effects given starting from the early research until the current research.

scholarly journals Assessment of eutrophication and nitrogen and phosphorus carrying capacity before and after removing pen culture (2013–2018) in Lake Changhu, China

2021 ◽  
Author(s):  
Xuemei Li ◽  
Tingbing Zhu ◽  
Yongfeng He ◽  
Xingbing Wu ◽  
Yongjiu Zhu ◽  
...  
Keyword(s):  
Oxygen Demand ◽  
Total Suspended Solid ◽  
Suspended Solid ◽  
The Other ◽  
Nitrogen And Phosphorus ◽  
Chl A ◽  
Before And After ◽  
The Mean ◽  
Inform Decision Making ◽  
Trophic Level Index

Abstract In this study, the eutrophication levels and nitrogen and phosphorus carrying capacities of Lake Changhu in Jingzhou city, Hubei province, China, were measured using the trophic level index (TLI) and Dillon model. The measurements were taken before (2013 and 2015) and after (2017 and 2018) the removal of pen aquaculture from the lake. The lake was divided into three districts: Lake Haizihu, Mahongtai Channel and Lake Dahu. The results showed total nitrogen (TN), chemical oxygen demand (COD), chlorophyll a (Chl-a), and total suspended solid (TSS) values were significantly higher in 2017 than in the other years. The Lake Haizihu district was predicted to be more seriously polluted than the other districts. In the sediment, the organic matter, STN (TN in sediment) and STP (TP in sediment) contents increased from 2013 to 2018. The mean TLI values ranged from 62.99 to 78.93 in the studied years, and the eutrophication level was highest in 2017. According to the Dillon model, when the target water quality was level III (GB 3838 − 2002, Ministry of Environmental Protection of China, 2002), the remaining TN and TP loading capacities were − 1470.72 t/a and − 182.74 t/a, respectively, in 2015, and 320.03 t/a and − 111.14 t/a, respectively, in 2018. The study provide valuable information about the actual water conditions of Lake Changhu, which will help to inform decision-making for the management of water environments.

scholarly journals Characteristics of Effluent from Formic Acid and Sodium Hydroxide Pulping of Kenaf Stem

2021 ◽  
pp. 20-30
Author(s):  
Jane Adamma Chukwudebelu ◽  
Jonah Agunwamba
Keyword(s):  
Formic Acid ◽  
Sodium Hydroxide ◽  
Paper Industry ◽  
Oxygen Demand ◽  
Total Suspended Solid ◽  
Total Solid ◽  
Pulp And Paper Industry ◽  
Suspended Solid ◽  
Agricultural Residue ◽  
Sources Of Pollution

The pulp and paper industry is considered as one of the major potential sources of pollution in the environment and a consumer of wood. Environmental effects have been attributed to chemicals introduced during the manufacturing process. This paper investigated the influence of cooking chemicals, concentration and time on the properties of effluent generated during pulping of agricultural residue. A stem of kenaf which is an agricultural residue was pulped with 20%, 60% and 90% concentrations of formic acid and sodium hydroxide at 1 hour, 2 hours and 3 hours intervals to determine the characteristics of their effluents. The lowest Chemical Oxygen Demand (COD) obtained from formic acid effluent for the 3 hours cooking at 20%, 60% and 90% concentrations was 324mg/l at 60% concentration after cooking for 2 hours while sodium hydroxide effluent has 3050mg/l at 20% concentration after 1hour cooking as its lowest. Formic acid effluent showed lowest Biological Oxygen Demand (BOD) of 10.63mg/l at 60% concentration after cooking for 2 hours while sodium hydroxide has 13.75mg/l at 90% after 1 hour cooking. The value of Total Solid (TS) from formic acid effluent was lowest (16890mg/l) at 60% concentration after cooking for 2 hours while sodium hydroxide lowest value (15524mg/l) was recorded at 20% after 3 hours cooking. Sodium hydroxide effluent has lowest Total Suspended Solid (TSS) of 3165mg/l while formic acid has 2245mg/l both at 90% concentrations after 2 and 3 hours cooking.

scholarly journals KAJIAN AWAL PEMBUATAN PUPUK CAIR ORGANIK DARI EFFLUENT PENGOLAHAN LANJUT LIMBAH CAIR PABRIK KELAPA SAWIT (LCPKS) SKALA PILOT

2014 ◽  
Vol 3 (1) ◽  
pp. 32-37
Author(s):  
Fristyana Sosanty Lubis, Irvan ◽  
Dedy Anwar ◽  
Basril Amirza Harahap ◽  
Bambang Trisakti
Keyword(s):  
Loading Rate ◽  
Organic Liquid ◽  
Oxygen Demand ◽  
Total Suspended Solid ◽  
Total Solid ◽  
Pilot Scale ◽  
Suspended Solid ◽  
Palm Oil Mill ◽  
Materials Used ◽  
Effective Microorganism

The objective of this study is to design an organic liquid fertilizer manufacturing process from palm oil mill effluent (POME) at pilot scale. Materials used were effluent from further processing of biogas fermentation from POME and starter (mixture of molasses, yeast and effective microorganism). Variables measured were total solid (TS), volatile solid (VS), total suspended solid (TSS), volatile suspended solid (VSS), and chemical oxygen demand (COD), in addition, analysis content of liquid fertilizers was performed. The research consisted of production of starters and fermentation process. Loading rate was started from hydraulic retention time (HRT) 2,500 days and bioreactor performance was observed at HRT 100, 90 and 80 days. The results showed that COD concentration of bioreactor effluent decreased from 8,600 to 1,580 mg/l and from analysis content, liquid fertilizers are composed of nitrogen 0.14%, P2O5 0.05%, K2O 0.07%, MgO 0.01%, CaO 0.001mg/l, C-Organic 0,12%, and C/N Ratio 0.86.

scholarly journals Reliability assessment of pollution removal of wastewater treatment plant using the method of Weibull

2020 ◽  
Vol 171 ◽  
pp. 01007
Author(s):  
Karolina Kurek ◽  
Piotr Bugajski ◽  
Agnieszka Operacz ◽  
Paulina Śliz ◽  
Krzysztof Jóźwiakowski ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Wastewater Treatment Plant ◽  
Probability Model ◽  
Treatment Plant ◽  
Oxygen Demand ◽  
Total Suspended Solid ◽  
Suspended Solid ◽  
Treated Effluent ◽  
Pollution Removal ◽  
Wastewater Samples

The aim of study was the analyze of the reliability pollution removal in wastewater treatment plant in Mińsk Mazowiecki. The article presents the results of the reliability of BOD, COD and total suspended solids removal of wastewater treatment plant with actived sludge. Physical and chemical analyses of raw wastewater and treated effluent were carried out in the years 2016–2017 (2 years). The designed size of the treatment plant with actived sludge, expressed in PE is 82 200 residents. During this study period, 50 wastewater samples were collected and analyses. For each of pollution indicators descriptive statistic, percentage reduction and and treatment plant reliability factors (WN) were calculated. The average effectiveness of BOD5 (Biochemical Oxygen Demand), CODCr (Chemical Oxygen Demand) and TSS (Total Suspended Solid) removal in this period of study were respectively: 99.1%, 96.3% and 98.9%. A reliability analysis was performed using the Weibull probability model.

SANASA Capivari II – the first full-scale municipal membrane bioreactor in Latin America

2014 ◽  
Vol 70 (2) ◽  
pp. 272-278 ◽  
Author(s):  
R. Pagotto ◽  
R. Rossetto ◽  
R. L. P. Gasperi ◽  
J. P. Andrade ◽  
J. Trovati ◽  
...  
Keyword(s):  
Latin America ◽  
Water Reuse ◽  
Membrane Filtration ◽  
Large Scale ◽  
Membrane Bioreactor ◽  
Oxygen Demand ◽  
Membrane System ◽  
Production Plant ◽  
Nitrogen And Phosphorus ◽  
Treated Effluent

The macro region of Campinas (Brazil) is rapidly evolving with new housing developments and industries, creating the challenge of finding new ways to treat wastewater to a quality that can be reused in order to overcome water scarcity problems. To address this challenge, SANASA (a publicly owned water and wastewater concessionaire from Campinas) has recently constructed the ‘EPAR (Water Reuse Production Plant) Capivari II’ using the GE ZeeWeed 500D® ultrafiltration membrane system. This is the first large-scale membrane bioreactor (MBR) system in Latin America with biological tertiary treatment capability (nitrogen and phosphorus removal), being able to treat an average flow of 182 L/s in its first phase of construction. The filtration system is composed of three membrane trains with more than 36,000 m2 of total membrane filtration area. The membrane bioreactor (MBR) plant was commissioned in April 2012 and the permeate quality has exceeded expectations. Chemical oxygen demand (COD) removal rates are around and above 97% on a consistent basis, with biochemical oxygen demand (BOD5) and NH3 (ammonia) concentrations at very low levels, and turbidity lower than 0.3 nephelometric turbidity unit (NTU). Treated effluent is sent to a water reuse accumulation tank (from where will be distributed as reuse water), and the excess is discharged into the Capivari River.

Biodegradation Potential of Abattoir Wastewater Microbiota in Nigeria

2020 ◽  
Vol 15 (3) ◽  
pp. 70-77
Author(s):  
J.D Bala ◽  
F. A Kuta ◽  
N.U Adabara ◽  
O.P Abioye ◽  
H.S Auta ◽  
...  
Keyword(s):  
Physicochemical Parameters ◽  
Oxygen Demand ◽  
Total Suspended Solid ◽  
Sole Source ◽  
Suspended Solid ◽  
Viable Count ◽  
Total Viable Count ◽  
Slaughter House ◽  
Abattoir Wastewater ◽  
Total Dissolved Solid

Water used for washing carcasses of slaughtered animals and slaughter house is referred to as abattoir wastewater. This study was designed to investigate the microorganisms associated with abattoir wastewater and to establish the biodegradation potential of abattoir wastewater microbiota. Isolation of the microbes was carried out using pour plate technique. The total viable count for the microbes’ ranges from 2.5×104 - 4.6×105 cfu/mL. Results revealed that all the physicochemical parameters exceeded the permissible limits (total dissolved solid (TDS) 1748mg/L, total suspended solid (TSS) 176mg/L, biochemical oxygen demand (BOD5) 91 mg/L and chemical oxygen demand (COD) 227 mg/L). Microorganisms isolated include Staphylococcus aureus, Pseudomonas aeruginosa, Bacillus subtilis, Bacillus anthracis, Aspergillus niger, A. flavus, Mucor sp, Trichophyton quickeanum and Penicillium sp. Some of the microbes were observed to have biodegradation potential by their ability to grow on mineral salt media (MSM) incorporated with starch, cellulose, crude oil, kerosene and diesel as the sole source of carbon and energy. This study suggests that abattoir wastewater harbors microorganisms that could be hazardous to public health when discharged into the environment untreated hence the need for strict monitoring. These microbes isolated could be employed as agent of bioremediation of wastewaters. Key words: Abattoir; Biodegredation; Isolation; Microbiota; Wastewater

scholarly journals Penanganan Parameter yang Hilang dalam Aplikasi Penilaian Kualitas Air IKA-INA

Jurnal Ecolab ◽  
2021 ◽  
Vol 15 (2) ◽  
pp. 101-109
Author(s):  
Dewi Ratnaningsih ◽  
◽  
Retno Puji Lestari ◽  
Ernawita Nazir
Keyword(s):  
Dissolved Oxygen ◽  
Chemical Oxygen Demand ◽  
Fecal Coliform ◽  
Oxygen Demand ◽  
Total Suspended Solid ◽  
Suspended Solid ◽  
Biological Oxygen Demand ◽  
Total Phosphate ◽  
Total Dissolved Solid

Kualitas air di suatu wilayah yang merupakan salah satu indikator lingkungan dapat dievaluasi menggunakan parameter fisika, kimia, dan biologi. Indeks Kualitas Air Indonesia (IKA-INA) dapat digunakan untuk menilai kondisi kualitas air secara menyeluruh pada lokasi dan waktu tertentu. IKA-INA dihitung dengan menggunakan sepuluh (10) parameter yaitu pH, Total Dissolved Solid (TDS), Total Suspended Solid (TSS), Dissolved Oxygen (DO), Biological Oxygen Demand (BOD), Chemical Oxygen Demand (COD), NO3, NH3, Total Phosphate (TP) dan fecal coliform. IKA-INA tersebut merupakan indeks kualitas air yang dapat memberikan informasi secara sederhana. Dalam pemanfaatannya, tidak semua data parameter dalam IKA-INA tersebut dapat terpenuhi karena adanya data tidak valid atau data yang hilang. Kajian ini bertujuan untuk memberi alternatif rumusan IKA-INA dengan parameter yang tidak lengkap atau jika tidak semua data dalam parameters tersebut tersedia. Metode yang digunakan dalam menyusun rumusan adalah dengan melakukan koreksi faktor bobot parameter IKA-INA terhadap parameter yang hilang dan nilai Q (nilai sub-indeks). Setelah itu dilakukan uji coba pada nilai baku mutu air dalam Peraturan Pemerintah No. 22/2021 Lampiran VI serta pada data kualitas air sungai yang mewakili kualitas baik dan buruk. Hasil uji coba menunjukkan bahwa bobot parameter terkoreksi dapat digunakan untuk penanganan parameter yang hilang dalam penilaian kualitas air dengan metode IKA-INA. Hasil IKA-INA dengan parameter hilang yang menggunakan bobot terkoreksi dan hasil IKA-INA dengan parameter lengkap mayoritas memberikan status IKA yang tidak berbeda, kecuali untuk parameter fecal coli dan parameter yang mempunyai kadar jauh berbeda terhadap kondisi air secara keseluruhan.

scholarly journals Effect of pH of Coagulant on the Treatment of Wastewater from Tofu Industry

2018 ◽  
Vol 67 ◽  
pp. 04006 ◽  
Author(s):  
Irfan Aditya ◽  
Sutrasno Kartohardjono
Keyword(s):  
Environmental Quality ◽  
Ceramic Membrane ◽  
Oxygen Demand ◽  
Total Suspended Solid ◽  
Quality Standard ◽  
Suspended Solid ◽  
Environmental Quality Standard ◽  
Total Dissolved Solid ◽  
National Environmental ◽  
Ultrafiltration Process

Wastewater generated from the tofu industry usually still contains high organic pollutants that can contaminate the surface water. Therefore, it should be treated properly before it can be disposed to the environment. This study aims to evaluate the combination of coagulationflocculation and ultrafiltration methods in treating the wastewater from tofu industry. Based on the preliminary tests, the wastewater from tofu industry have pH, total dissolved solid (TDS), total suspended solid (TSS), turbidity and chemical oxygen demand (COD) of 3.4, 870 - 1080 mg/L, 370 mg/L, 446 FAU and 7954 mg/L, respectively. The coagulant and membrane used in this study were Poly aluminum chloride (PAC) and the ceramic membrane, respectively. Experimental results showed that the best pH for coagulation-flocculation process is at pH of 7.0, and this pH was then used for ultrafiltration process. The flux of the ultrafiltration membrane increased with increasing the trans membrane pressure due to increasing driving force. The observed parameters such as TSS and turbidity of wastewater decreased drastically after experiencing ultrafiltration process and met the National Environmental Quality Standard. However, the COD of water produced in the ultrafiltration process was still high and did not meet the National Environmental Quality Standard.

Treatment of Palm Oil Mill Effluent by Electrocoagulation Process

2012 ◽  
Vol 610-613 ◽  
pp. 363-367
Author(s):  
Tipakorn Suwannarat ◽  
Nipon Pisutpaisal ◽  
Siriorn Boonyawanich
Keyword(s):  
Palm Oil ◽  
Contact Time ◽  
Batch Reactor ◽  
Oxygen Demand ◽  
Total Suspended Solid ◽  
Suspended Solid ◽  
Steel Plates ◽  
Palm Oil Mill Effluent ◽  
Electrocoagulation Process ◽  
Palm Oil Mill

The purpose of current study was to examine the ability of electrocoagulation in decreasing chemical oxygen demand (COD) and total suspended solid (TSS) constituted in palm oil mill effluent. Bench-scale batch reactor containing two aluminum or steel plates (10 cm width × 30 cm height with 0.1 cm thickness) serving as electrodes with the interval distance of 3 cm was set up. The wastewater with COD concentration of 68,425 mg L-1 was treated in the reactor under the varied direct currents (0.3-1.3 A) and contact time (30-120 min). Sodium chloride was added to the wastewater to obtain the final concentration of 2 g L-1 (conductivity of 10 ms) prior to being fed into the reactor. The results showed that higher treatment efficiency when the aluminum was used as electrodes compared to the steel. COD removal efficiency was directly proportional to the contact time. The maximum COD and TSS removal observed at 1.3 A current input and 60 min contact time are 74.1 and 77.0%, respectively.

Sign in / Sign up

Export Citation Format

Share Document