scholarly journals Occupational Injury and Its Correlated Factors among Small-Scale Industry Workers in Towns of Bale Zone, Southeast Ethiopia

2019 ◽  
Vol 2019 ◽  
pp. 1-8
Author(s):  
Nagasa Dida ◽  
Jiregna Darega ◽  
Feyisa Lemesa ◽  
Jeylan Kassim ◽  
Bedasa Woldemichael
Keyword(s):  
Risk Perception ◽  
Occupational Injury ◽  
Health And Safety ◽  
Safety Training ◽  
Small Scale ◽  
Small Scale Industry ◽  
Southeast Ethiopia ◽  
Correlated Factors ◽  
Small Scale Industries ◽  
Bale Zone

Introduction. In developing countries, the laborer forces have managed many of the industrial works. As a result, the process of the work has put the health and lives of workers at risk. Thus, this study was designed to assess occupational injury and its correlated factors among small-scale industry workers in the towns of Bale Zone, Southeast Ethiopia. Methods. An institution-based cross-sectional study design was employed among five hundred ninety small-scale industries in towns of Bale zone, Southeast Ethiopia, in March to April 2016. Multistage sampling was applied to recruit the study subjects. Data were collected through interviewer-administered questionnaires. A structured questionnaire addressing the objectives of the study was used. EpiData was used for data entry, and the data were exported to SPSS windows version 20 for analysis. Descriptive statistics like frequency and percentage were used for the prevalence, whereas binary and multiple logistic regressions were employed to identify the predictors of the outcome variable. Results. A total of 574 workers from different small-scale industries, including woodwork, metalwork, and concrete block construction, participated in the study with a response rate of 97.3%. In this study, among the total participants of the study, 43.2% (248), 30% (172), and 21.6% (124) of them had encountered lifetime, last one year, and six months occupational injury, respectively. Taking health and safety training, presence of any things on the floor that can cause accidents and occupational risk perception were independent predictors of occupational injury. The presence of any things on the floor that can cause accidents and having a low-risk perception increases occupational injury by 12.69 [AOR: 12.69, (1.67–96.13)] and 2.84 [AOR: 2.84, (1.80–4.49)], respectively. Conclusion. About one in three occupational injuries occurred among small-scale industry workers. Health and safety training should be provided for every worker in small-scale industries. Supportive supervision focusing awareness creation, economic stability, and health care from health office, social and labor affair office, and other concerned body is highly recommended. District or town health office should address the identified factors to promote the health of the workers.

Impact Of Human Resource Practices In Small Scale Industries In Thoothukudi District Of Tamilnadu

2019 ◽  
Vol 5 (4) ◽  
pp. 160-169
Author(s):  
Srimo Fernandas
Keyword(s):  
Economic Growth ◽  
Human Resource ◽  
Management Practices ◽  
Human Factor ◽  
Vital Role ◽  
Small Scale ◽  
Average Income ◽  
Small Scale Industry ◽  
Human Resource Management Practices ◽  
Small Scale Industries

In the economic growth of a country, the human factor plays a vital role. The study has been made to study the growth of small scale industries in the development of human resource management practices of in Thoothukudi district. The study has the following objectives. To study the socio-economic outline of the small scale industry owners. To understand the nature of management of the small-scale industry. To find out the motivational factors for starting small-scale industries. To analyse the average income generated by different activities by the small scale industry owners.

scholarly journals Influence of Input Value and Labor Expenditure on Output Value: A Case of Micro and Small Scale Industry in Indonesia

2020 ◽  
Vol 4 (1) ◽  
pp. 45
Author(s):  
Tongam Sihol Nababan ◽  
Elvis Fresly Purba ◽  
Jongkers Tampubolon
Keyword(s):  
Production Function ◽  
Analytical Method ◽  
Production Functions ◽  
Small Scale ◽  
Small Scale Industry ◽  
Labor Expenditure ◽  
Production Output ◽  
Small Industries ◽  
Small Scale Industries ◽  
Descriptive Method

Objectives of the study are: (1) to estimate the influence of input value and labor expenditure on the output of micro and small industries in Indonesia, (2) to analyze the form of translog production function that is compatible with micro and small industries in Indonesia. The analytical method used is descriptive method and analysis of translog production functions with scenarios: linear translog function, complete second-order or quadratic linear translog function, and linear translog function with interaction. Results showed that (1) the function of linear translog production with interaction was more suitable used to estimate the production output of micro and small industries in Indonesia, (2) input value and labor expenditure had a positive and significant effect on output values, (3) micro-industry enterprises more emphasis on the allocation of larger workforce, while small-scale industry emphasizes greater allocation of input value, (4) the allocation of input value and labor expenditure are more efficient in micro-industries compared to small-scale industries.

Small-Scale Development of Product

2021 ◽  
pp. 77-94
Author(s):  
Jyoti Yadav ◽  
Swati Agarwal ◽  
Suphiya Khan
Keyword(s):  
Product Development ◽  
Low Cost ◽  
Small Scale ◽  
Management Skills ◽  
Employment Opportunities ◽  
Income Source ◽  
Small Scale Industry ◽  
Is Strategy ◽  
High Level ◽  
Small Scale Industries

Small-scale product development is not for everyone, and it needs a high level of discipline, dedication, persistence, and creativity as well as a lot of work. Before setting up a small-scale business, one needs seed money, physical location of the business venture, construction work, equipment/machinery maintenance, management skills, accounting skills, and last but not least, marketing skills. For the development of any area, the small-scale industry development is very important mainly for the income source of the community and for employment opportunities. On the basis of study, four strategies that are used for the development of small-scale industries were found, and these strategies are 1) promotion and development of institutional, business groups, and cooperatives; 2) determination brands; 3) strategy competition with low cost and product development; 4) to improve final access market orientation strategies. On the basis of analysis of these strategies, they are prioritized, and the first priority is strategy.

Using Homer Software for Cost Analysis of Stand-Alone Power Generation for Small Scale Industry in Nigeria: A Case Study Lumatec Aluminium Products

2021 ◽  
Vol 2 (2) ◽  
pp. 90-102
Author(s):  
Luqman Raji ◽  
Zhigilla Y.I ◽  
Wadai J
Keyword(s):  
Power Generation ◽  
Cost Analysis ◽  
Oil And Gas ◽  
Cost Effective ◽  
Small Scale ◽  
Pv System ◽  
Rural And Urban ◽  
Small Scale Industry ◽  
The Cost ◽  
Small Scale Industries

Nigeria is one of developing countries in the world that experience shortage of electricity for her economic and social development. In Nigeria, most of the small-scale industries use diesel/petrol-based systems to generate their electricity. However, due to the cost fluctuation of oil and gas fuel, an alternative power generation should be considered. This paper targets to examine the cost analysis of system for supplying electricity to LUMATEC Aluminium products shop in Mubi, Adamawa state Nigeria. Hybrid Optimization Model for Electric Renewable (HOMER) is used as a tool for cost analysis. The scenario consider in this study was only stand-alone with battery system. Results revealed that the system have 10kW PV with cost of electricity (COE) of $0.312/kW. The initial capital cost and total net present cost (NPC) are $21.775 and $26.148 respectively, with payback period of 5.8years. In conclusion, this study provides the solution of power supply to the small-scale industries at cost effective and available throughout the year and it is feasible to solve the small-scale industries, rural and urban electricity supplying in this country (Nigeria). It is recommended that Nigerian Government & Law makers should promotes the use of standalone PV system for domestic and small-scale industry by providing financial assistance through soft loans, subsides and grants.

Impacts of Kaizen in a small-scale industry of India: a case study

2014 ◽  
Vol 5 (1) ◽  
pp. 22-44 ◽  
Author(s):  
Amit Kumar Arya ◽  
Sanjiv Kumar Jain
Keyword(s):  
Poor Quality ◽  
Value Stream Mapping ◽  
Small Scale ◽  
Content Type ◽  
Value Stream ◽  
Small Scale Industry ◽  
Production Techniques ◽  
Small Industries ◽  
Small Scale Industries

Purpose – A large number of small-scale industries have shown their existence in India, tough competition among them made the survival of small industries difficult. All facing problems like reduced production and poor quality. The case study presented in the paper deals with Kaizen implementation in a machine vice manufacturer company. Kaizen has tremendous impacts on the production techniques and lead times. Case study represented is to motivate practitioners for implementing Kaizen in small-scale industries of India. The paper aims to discuss these issues. Design/methodology/approach – The methodology applied to implement the Kaizen in Indian small-scale industry. Fishbone diagrams have been used to represent cause and effects. The result has been shown as savings in terms of money and time. Findings – Processing time has been reduced by 44.4 percent and an amount of Rs. 64,000 has been saved by recovering a total of 80 square feet working area. Improvements in the form of work flow have been achieved. Research limitations/implications – Value stream mapping can be integrated with Kaizen for more reduction in the product lead time. Practical implications – The paper will be worthily for practitioners and consultants for understanding Kaizen implementation in small-scale industry of India. Originality/value – The paper yields lots of values for practitioners to understand the impacts and significance of the Kaizen in small-scale industries of India. Also it bridges the gap between theory and practical of Kaizen implementation in small-scale industry of India.

scholarly journals Assessment of Occupational Injury among Industrial Workers in the Bahir Dar City of Northwest Ethiopia: Institution-Based Cross-Sectional Study

2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
Berhanemeskel Hunegnaw ◽  
Mesafint Molla ◽  
Yihun Mulugeta ◽  
Maru Meseret
Keyword(s):  
Occupational Injury ◽  
Health And Safety ◽  
Cross Sectional Study ◽  
Northwest Ethiopia ◽  
Small Scale ◽  
Bahir Dar ◽  
Industrial Workers ◽  
Sectional Study ◽  
Cross Sectional ◽  
The City

Background. Ethiopia is one of the economically fastest growing countries in the world. Industries in Ethiopia are booming, and Bahir Dar is one of the industrial zones in the country. The city administration is planning to recruit the majority of the workforce in these industries. However, injuries related to occupations in the industries are not that much studied yet. Therefore, this study aimed to assess the prevalence of occupational injury and its associated factors among industrial workers in the Bahir Dar city of Northwest Ethiopia. Methods and Materials. Institution-based cross-sectional study design was used. Multistage stratified random sampling technique was employed to select 846 study participants from each stratum (small-, medium-, and large-scale industries). Data were analyzed using Statistical Package for Social Sciences (SPSS), version 21. Binary logistic regression was employed to determine the existence of an association between dependent and independent variables. Result. A total of 803 participants were included in the study with a response rate of 95%. The mean age of respondents was 28.9 years (SD ± 8 years). Five hundred nine (63.4%) were occupationally injured in the last 12 months. Sex (AOR = 3.66, 95% CI = (2.53–5.29)), employment status (AOR = 7.33, 95% CI = (3.31–16.22)), regular health and safety supervision (AOR = 2.66, 95% CI= (1.79–3.96)), training prior to entry to actual work (AOR = 3.18, 95% CI= (2.14–4.74)), and use of personal protective equipment (PPE) (AOR = 2.48, 95% CI= (1.74–3.56)) were significantly associated with occupational injury. Conclusion. The prevalence of occupational injury in this research is found to be very high. It is advisable to provide sustainable training and regular occupational health and safety supervision for industrial workers in the city. Moreover, research has to be conducted to know the reasons for the difference in the prevalence of occupational injury between large-, medium-, and small-scale industries.

scholarly journals The pooled effect of Factors Contributing to Occupational Injury among Workers in the Construction, Manufacturing, and Mining Industries in Africa: A systematic Review and Meta-Analysis.

2021 ◽  
Author(s):  
Mitiku Bonsa Debela ◽  
Muluken Azage ◽  
Achenef Motbainor Begosaw
Keyword(s):  
Systematic Review ◽  
Effect Size ◽  
Personal Protective Equipment ◽  
Odds Ratio ◽  
Occupational Injury ◽  
Meta Analysis ◽  
Health And Safety ◽  
Safety Training ◽  
Temporary Employment ◽  
Protective Equipment

Abstract Working in the industry is commonly associated with a combination of personal and environmental health and safety risks. However, the finding from African countries on the factors contributing to occupational injury is inconsistent and not inclusive. Therefore, this systematic review and meta-analysis were estimated the pooled effect of factors leading to occupational injury among workers in the industries in Africa.Published articles found in Scopus, PubMed/Medline, Science Direct, and Cochrane Library databases were systematically searched. Observational studies revealing the factors leading to occupational injury among workers in the industry in Africa were incorporated. The pooled effect size of the studies was computed using STATA version 14 statistical software. The heterogeneity of the study was assessed using Cochrane Q test statistics, the I-squared values test, and the Galbraith plot. Considering within and between studies variability, the random-effect model was used to determine the pooled effect size. Funnel plot and egger's tests were conducted to evaluate publication bias.Out of 603 accessed studies, 20 studies that fulfilled the eligibility criteria were included to estimate the pooled effect of factors contributing to occupational injury. Accordingly, being temporary employment workers (pooled odds ratio= 2.13 (1.06, 3.21)), not receiving ongoing health and safety training (pooled odds ratio= 1.98 (1.21, 2.76), and the proper and consistent use of personal protective equipment (pooled odds ratio= 0.60 (0.32, 0.88) were factors significantly associated with the odds of experiencing an occupational injury. Being temporary employment workers and not receiving ongoing health and safety training elevates the odds of sustaining occupational injuries. But, the proper and consistent use of personal protective equipment reduces the odds of experiencing an occupational injury. Hence, the government, industrial managers and industrial hygienists, and other stakeholders should implement rigorous law enforcement to ensure compliance, proper implementation of health and safety measures practices, and safety audits.

scholarly journals Ergonomic Design of a Scrap Compactor for Small Scale Industries

2013 ◽  
Vol 10 ◽  
pp. 167-172
Author(s):  
Bobby P. Paul ◽  
S. Darius Gnanaraj ◽  
J. Chandran
Keyword(s):  
Compression Ratio ◽  
Current Practice ◽  
Test Bench ◽  
Circuit Diagram ◽  
Small Scale ◽  
Concept Design ◽  
Hydraulic Circuit ◽  
Small Scale Industry ◽  
And Storage ◽  
Small Scale Industries

Concept design of a scrap compactor is presented. Required data for the design of the scrap compactor, the hydraulic circuit, the compression ratio, force required for compression are collected from literature. The current practice of scarp removal and storage in a small scale industry is shown. The calculations for arriving at the force required for compaction is presented. The hydraulic circuit diagram and testing of the circuit in a pneumatic test bench are explained. Cost of the prototype and the break even period are discussed. Ergonomic principles and safety due to usage of scrap compactor are highlighted.

scholarly journals Determinants of Occupational Injury: A Case Control Study among Textile Factory Workers in Amhara Regional State, Ethiopia

2011 ◽  
Vol 2011 ◽  
pp. 1-8 ◽  
Author(s):  
Zewdie Aderaw ◽  
Dagnew Engdaw ◽  
Takele Tadesse
Keyword(s):  
Job Stress ◽  
Case Control Study ◽  
Occupational Injury ◽  
Health And Safety ◽  
Case Control ◽  
Safety Training ◽  
Factory Workers ◽  
Textile Factory ◽  
Textile Factory Workers ◽  
Control Study

Background.Occupational injuries pose major public health and socioeconomic developmental problems. However, efforts towards investigation of determinants among factory workers are very minimal in developing countries. Thus, this study aimed at to identify determinants of occupational injury among textile factory workers in Amahara regional state in Ethiopia.Methods.A case control study was done among 456 textile factory workers (152 cases and 304 controls). Self-reported data from workers and document review from factories clinics were used to ascertain occupational injury status within one-year period. Data was collected using pretested and structured questionnaire by trained data collectors. Odds ratio with 95% confidence interval was used to assess level significance.Results.Young age (<30 years) (AOR 1.90, 95% CI (1.22, 2.94)), male gender (AOR 2.54, 95% CI (1.58, 4.07)), health and safety training (AOR 1.85, 95% CI (1.17, 2.91)), sleeping disturbance (AOR 1.99, 95% CI (1.30, 3.04)), and job stress (AOR 2.25, 95% CI (1.15, 4.41)) were significant predictors of occupation injury.Conclusion.Lack of training, sleeping disturbance, and job stress increased the risk of occupational injury. So, providing basic health and safety training with special emphasis on younger and male workers, reducing stressors, and providing sleep health education were recommended.

Sign in / Sign up

Export Citation Format

Share Document