scholarly journals Design and Impedance Modeling of a Compact Sequentially Rotated Quasi-Lumped Antenna Array for Wi-Fi Applications

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Yazeed M. I. Qasaymeh
Keyword(s):  
Antenna Array ◽  
Axial Ratio ◽  
Center Frequency ◽  
Resonance Model ◽  
Ieee 802.11A ◽  
Circularly Polarized ◽  
Quarter Wavelength ◽  
Impedance Modeling ◽  
Physical Insight ◽  
Insight Into

In this study, a miniaturized 2 × 2 sequentially rotated (SR), circularly polarized (CP), and quasi-lumped antenna array that resonates in the IEEE 802.11a band is introduced. The shorting pins technique is implemented to achieve circular radiation patterns, and the resonating elements are excited using a SR quarter-wavelength feeding network. A resonance model of the four radiating elements array is postulated to give a physical insight into the relative dimensions and to allow for a study of the resonance characteristics and the effect of the shorting pins. An antenna model is simulated, fabricated, and measured to authenticate this arrangement, giving results of |S11| < −10 dB and axial ratio (AR) < 3 dB for bandwidths of 3.85% (5.645–5.867 GHz) and 1.54% (5.77–5.86 GHz) for right-hand circular polarization (RHCP). The size of the antenna array structure is 0.696 λ 0 × 0.599 λ 0 × 0.0157 λ 0 at a center frequency of 5.8 GHz.

scholarly journals A Compact Sequentially Rotated Circularly Polarized Dielectric Resonator Antenna Array

2021 ◽  
Vol 11 (18) ◽  
pp. 8779
Author(s):  
Yazeed Qasaymeh ◽  
Abdullah Almuhaisen ◽  
Ali Alghamdi
Keyword(s):  
Antenna Array ◽  
Input Impedance ◽  
Dielectric Resonator ◽  
Axial Ratio ◽  
Dielectric Resonator Antenna ◽  
Resonant Frequencies ◽  
Ieee 802.11A ◽  
Circularly Polarized ◽  
Quarter Wavelength

In this study, a compact 2 × 2 circularly polarized (CP) sequentially rotated (SR) dielectric resonator antenna (DRA) array operating in the IEEE 802.11a band is presented. To acquire the CP radiation, an elliptical slot (ES) was introduced to couple a rectangular dielectric resonator (RDR). The ES generates two resonant frequencies corresponding to the dominant even and odd modes. The SR feeder is made of four quarter-wavelength microstrip transformers to reduce the input impedance of the elements and, consequently, maximize the power transferred to each element. Experimental and simulation verifications were conducted on a 54 × 50 × 0.813 mm3 prototype to evaluate the performance of the proposed antenna array, which achieved a VSWR < −10 dB bandwidth of 1 GHz (5.1–6.05 GHz) and axial ratio (AR) < 3 dB of 0.95 GHz (5.1–5.85 GHz). The agreement between the simulated and measured results confirmed the validity of the proposed design.

Bilayer split-ring chiral metamaterial based reconfigurable antenna for polarization conversion

Frequenz ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Preet Kaur ◽  
Pravin R. Prajapati
Keyword(s):  
Low Cost ◽  
Axial Ratio ◽  
Center Frequency ◽  
Impedance Bandwidth ◽  
Split Ring ◽  
Circularly Polarized ◽  
Left Hand ◽  
Rectangular Patch ◽  
Mode 2 ◽  
Chiral Metamaterial

Abstract A bilayer split-ring chiral metamaterial converts the linearly polarized wave, into a nearly perfect left or right-handed circularly polarized wave. The proposed antenna is intended to operate at center frequency of 5.80 GHz with switchable polarization capability. The polarization re-configurability is achieved by electronically switching of two PIN-diode pairs, which are embedded into bilayer split-ring Chiral Metamaterial. The optimized length of rectangular patch is 16 mm and width is 12.1 mm. Two types of radiation characteristics offered by the proposed antenna; left hand circularly polarized in mode 1 and right hand circularly polarized in mode 2. Measured results show that its impedance bandwidth is 155 MHz from 5.70 to 5.855 GHz for both mode 1 and mode 2. The measured axial-ratio bandwidth is 100 MHz from 5.75 to 5.85 GHz for mode 1 and 110 MHz from 5.73 to 5.84 GHz for mode 2. Antenna has LHCP gain of 2.52 dBi and RHCP gain of −23 dBi in mode 1. RHCP gain of 2 dBi and polarization purity of about −20 dBi is obtained in mode 2. The proposed antenna has simple structure, low cost and it has potential application in field of wireless communication (i.e., WiMax, WLAN etc.).

scholarly journals CPW-fed circularly-polarized antenna array with high front-to-back ratio and low-profile

Open Physics ◽  
2018 ◽  
Vol 16 (1) ◽  
pp. 651-655 ◽  
Author(s):  
Yilin Liu ◽  
Kama Huang
Keyword(s):  
Antenna Array ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Axial Ratio ◽  
Antenna Design ◽  
Impedance Bandwidth ◽  
Feeding Method ◽  
Circularly Polarized ◽  
Low Profile ◽  
Novel Design

Abstract A novel design of a coplanar waveguide (CPW) feed antenna array with circular polarization (CP) and a high front-to-back ratio is described. The proposed CP array is achieved by using a compact CPW–slotline transition network etched in the ground plane. The measured results show that this kind of feeding method can improve the impedance bandwidth, as well as the axial ratio bandwidth of the CP antenna array and provide adequate gain. The proposed array can achieve a 6.08% impedance bandwidth and a 4.10% CP bandwidth. Details of the antenna design and experimental results are presented and discussed.

scholarly journals A Circularly Polarized Antenna Array with Gain Enhancement for Long-Range UHF RFID Systems

Electronics ◽  
2019 ◽  
Vol 8 (4) ◽  
pp. 400 ◽  
Author(s):  
Wei Hu ◽  
Guangjun Wen ◽  
Daniele Inserra ◽  
Yongjun Huang ◽  
Jian Li ◽  
...  
Keyword(s):  
Antenna Array ◽  
Long Range ◽  
Radio Frequency Identification ◽  
Coaxial Line ◽  
Axial Ratio ◽  
High Gain ◽  
Basic Element ◽  
Uhf Rfid ◽  
Circularly Polarized ◽  
Gain Enhancement

A 2 × 2 circularly polarized (CP) sequential rotation microstrip patch antenna array with high gain for long-range ultra-high frequency (UHF) radio frequency identification (RFID) communication is proposed in this paper. In order to meet the operational frequency band requirement of 840–960 MHz and, at the same time, achieve enhanced broadside gain, a two-level sequential rotation structure is developed. Series power divider is used as the basic element of the feed network that is implemented with the substrate-integrated coaxial line technology for minimizing radiation losses. The manufactured prototype exhibits a peak gain of 12.5 dBic at 900 MHz and an axial ratio (AR) bandwidth (AR ≤ 3 dB) of 18.2% from 828 to 994 MHz. In comparison with the state-of-the-art, the proposed antenna shows an excellent gain/size trade-off.

scholarly journals Design of a Small-Size Broadband Circularly Polarized Microstrip Antenna Array

2018 ◽  
Vol 2018 ◽  
pp. 1-10 ◽  
Author(s):  
Pingyuan Zhou ◽  
Zhuo Zhang ◽  
Mang He ◽  
Yihang Hao ◽  
Chuanfang Zhang
Keyword(s):  
Reflection Coefficient ◽  
Antenna Array ◽  
Patch Antenna ◽  
Microstrip Antenna ◽  
Axial Ratio ◽  
Satellite Communications ◽  
Lateral Size ◽  
Circularly Polarized ◽  
Feeding Technique ◽  
Microstrip Antenna Array

A small-size 2×2 broadband circularly polarized microstrip antenna array is proposed in this article. The array has four broadband dual-feed U-slot patch antenna elements with circular polarization, and the sequential feeding technique is used to further enhance the 3 dB axial ratio bandwidth. The lateral size of the fabricated array is as small as 1.33λ0×1.33λ0, and the profile is only 0.04λ0. Measured results show that the overlapped −10 dB reflection coefficient and the 3 dB AR bandwidth is 53%, and the variation of the measured realized gain is less than 1 dB for S-band satellite communications (1.98–2.2 GHz).

Dual circularly polarized multilayer MIMO antenna array with an enhanced SR-feeding network for C-band application

2017 ◽  
Vol 9 (8) ◽  
pp. 1741-1748 ◽  
Author(s):  
Mahdi Jalali ◽  
Mohammad Naser-Moghadasi ◽  
Ramezan Ali Sadeghzadeh
Keyword(s):  
Antenna Array ◽  
Tai Chi ◽  
Impedance Matching ◽  
Axial Ratio ◽  
Wide Band ◽  
Impedance Bandwidth ◽  
Antenna Element ◽  
Circularly Polarized ◽  
Mimo Antenna ◽  
Feed Network

Wide-band circularly polarized multi-input multi-output (MIMO) antenna array with a 2 × 4 feed network was proposed for C-band application. Different unique techniques were utilized in the proposed array to enhance the antenna characteristics, such as gain, 3 dB axial ratio bandwidth (ARBW), impedance tuning, and ruinous mutual coupling effects. A miniaturized dual-feed Tai chi-shaped antenna element with a pair of feeding points and a pair of eyebrow-shaped strips was presented for enhancing circular polarization (CP) purity and impedance matching. For a better improvement of CP features, a 2*4 MIMO sequentially rotated (MIMO-SR) feed network was used to achieve broader 3 dB ARBW. Besides, the MIMO feature of the feed network could control the left- and right-handed CP, respectively. Ultimately, specific forms of slot and slit structures were applied onto the top layer of MIMO feed network that provided a high isolation between the radiating elements and array network. Furthermore, the diversity gain (DG) was studied. The extracted measured results illustrated an impedance bandwidth of 3.5–8.2 GHz at port 1 and 3.5–8.3 GHz at port 2 for VWSR < 2 and 3 dB ARBW of 4.6–7.6 GHz at port 1 and 4.6–7.5 GHz at port 2. The peak gain of 9.9 dBi was at 6 GHz.

scholarly journals Improvement on a 2 × 2 Elements High-Gain Circularly Polarized Antenna Array

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
C. Liu ◽  
A. Yan ◽  
C. Yu ◽  
T. Xu
Keyword(s):  
Antenna Array ◽  
Axial Ratio ◽  
High Gain ◽  
Center Frequency ◽  
The Novel ◽  
Orthorhombic Structure ◽  
Commercial Communication ◽  
Vivaldi Antenna ◽  
Serrated Structure ◽  
Vivaldi Antennas

A novel antipodal Vivaldi antenna with tapering serrated structure at the edges is proposed. Compared with traditional Vivaldi antennas without serrated structure, the gain of the designed antenna is significantly improved in the desired frequency band (4.5–7.5 GHz). In addition, a 2 × 2 Vivaldi antenna array with an orthorhombic structure is designed and fabricated to achieve a circular polarization (CP) characteristic. With this configuration, the 3 dB axial ratio bandwidth of the array reaches about 42% with respect to the center frequency of 6 GHz and a high gain is achieved as well. The novel Vivaldi antenna and CP antenna array both have ultrawide band (UWB) and high-gain characteristics, which may be applied to the field of commercial communication, remote sensing, and so forth.

scholarly journals Compact and High Gain 4 × 4 Circularly Polarized Microstrip Patch Antenna Array for Next Generation Small Satellite

2021 ◽  
Vol 11 (19) ◽  
pp. 8869
Author(s):  
Manzoor Elahi ◽  
Son Trinh-Van ◽  
Youngoo Yang ◽  
Kang-Yoon Lee ◽  
Keum-Cheol Hwang
Keyword(s):  
Antenna Array ◽  
Patch Antenna ◽  
Axial Ratio ◽  
High Gain ◽  
Microstrip Patch Antenna ◽  
Small Satellite ◽  
Next Generation ◽  
Circularly Polarized ◽  
Microstrip Patch ◽  
Left Handed

In this article, a high gain and compact 4 × 4 circularly polarized microstrip patch antenna array is reported for the data transmission of the next-generation small satellite. The radiating element of the circularly polarized antenna array is realized by the conventional model of the patch with truncated corners. A compact two-stage sequential rotational phase feeding is adopted that broadens the operating bandwidth of the 4 × 4 array. A small stub is embedded in the sequential rotational feed, which results in better performance in terms of the S-parameters and sequential phases at the output ports than sequential rotational feed without open stub. A prototype of the array is fabricated and measured. Fulfilling the application requirements of the next-generation small satellites, the array has the left-handed circularly polarized gain of more than 12 dBic with the axial ratio level below 1.5 dB in the ±10∘ angular space with respect to the broadside direction for the whole bandwidth from 8.05 GHz to 8.25 GHz. Moreover, the left-handed circularly polarized gain varies from 15 to 15.5 dBic in the desired band. The radiation patterns are measured; both the co- and X-pol are validated.

scholarly journals A Broadband Circularly Polarized Antenna with Low-Profile and Wide Axial Ratio Beamwidth

2021 ◽  
Vol 18 (11) ◽  
Author(s):  
Madhuri SAHAL ◽  
Vivekanand TIWARI ◽  
Dinesh YADAV ◽  
Deepak BHATNAGAR ◽  
Tejpal Tejpal
Keyword(s):  
Axial Ratio ◽  
Center Frequency ◽  
Ieee 802.11A ◽  
Frequency Bands ◽  
Military Application ◽  
Multiple Application ◽  
Low Profile ◽  
Polarization Characteristics ◽  
Application Frequency

In this work, the design and the characterization of a broadband circular polarized monopole having low-profile and wide axial ratio beamwidth were presented. The antenna was designed on readily available, inexpensive glass-reinforced epoxy substrate having an overall size of 0.56λ0×0.50λ0×0.029λ0 (at center frequency 5.5 GHz). The proposed antenna was a modification of a square-shaped monopole antenna, which incorporates a pair of peripheral slits and an off-center slot for a elliptical polarized radiation. A v-shaped notch below the feed line was introduced and extended as antenna ground to generate broadband circular polarization characteristics. The −10 dB reflection coefficient bandwidth and 3-dB axial-ratio bandwidth of the proposed antenna were measured to be of 47.6 and 27 %, respectively. The 3-dB axial ratio beamwidth of the antenna was 93.5°. The antenna proposed in this work covers multiple application frequency bands including HiperLAN/2 IEEE 802.11a (5.15 - 5.35 GHz / 5.47 - 5.725 GHz) band, WLAN frequency band (5.1 - 5.9 GHz), C-band uplink (5.925 - 6.325 GHz) and part of military application band (4.75 - 4.99 GHz). HIGHLIGHTS Design and characterization of a broadband circular polarized monopole having low-profile and wide axial ratio beamwidth Proposed antenna covers multiple application frequency bands including HiperLAN/2 IEEE 802.11a, WLAN, C-band uplink and part of military application bands Proposed antenna is compact, low-profile and exhibits good polarization purity GRAPHICAL ABSTRACT

Sign in / Sign up

Export Citation Format

Share Document