scholarly journals Research on Algorithm to Improve Accuracy of Temperature Measurement of Moving Strong Reflector

2021 ◽  
Vol 2021 ◽  
pp. 1-8
Author(s):  
Shaoliang Wei ◽  
Yuanjia Yang ◽  
Fengyu Cheng
Keyword(s):  
Surface Temperature ◽  
Temperature Measurement ◽  
Rotation Speed ◽  
Field Investigation ◽  
Improve Measurement ◽  
Aluminum Processing ◽  
Speed Change ◽  
Infrared Temperature Measurement ◽  
And Control

The roll is necessary and important equipment in aluminum processing, and its surface temperature will change its thermal expansion. The gap shape between rolls will change accordingly, affecting the quality of aluminum products. Therefore, it is important to monitor and control the roll surface temperature. The roller is a highly reflective body that rotates continuously during work. This article proposes an infrared temperature sensor to measure its surface temperature. Through field investigation and a literature review, we know that a roller’s motion will affect the accuracy of its surface temperature measurement. An infrared temperature measurement compensation algorithm based on rotation speed is constructed to eliminate this influence. Experimental results show that this method can make up for the temperature measurement error caused by the change of rotation speed and hence improve measurement accuracy. The algorithm is simple and adaptable and provides a new method to improve the accuracy of temperature measurement given speed change.

Study on Construction Parameters of Cement Deep Mixing Piles

2012 ◽  
Vol 226-228 ◽  
pp. 1386-1389
Author(s):  
Wen Tao Rong
Keyword(s):  
Rotation Speed ◽  
Construction Process ◽  
Construction Quality ◽  
Research Results ◽  
Deep Mixing ◽  
Shaft Rotation ◽  
And Control ◽  
Construction Efficiency ◽  
Cement Deep Mixing

Construction quality is one of the main reasons which lead to the failure of cement deep mixing pile. In order to ensure the construction quality of cement deep mixing pile and control its construction process, the influence of four construction parameters such as slurry conveying capacity, drilling and hoisting speed, agitation shaft rotation speed and remixing times on pile quality are analyzed. At last key reasons to ensure the construction quality of cement deep mixing pile are pointed out. Pile quality and construction efficiency should be considered when construction parameters being optimized. The research results provide reference for construction of cement deep mixing piles in the future.

Resistance Monitor and Control for Vacuum Evaporation of Metals and Carbon

1976 ◽  
Vol 34 ◽  
pp. 572-573
Author(s):  
Russell L. Steere ◽  
Eric F. Erbe ◽  
J. Michael Moseley
Keyword(s):  
Electronic Device ◽  
Point Sources ◽  
High Contrast ◽  
Variable Resistor ◽  
Quality Of Results ◽  
Low Contrast ◽  
Evaporation Source ◽  
And Control ◽  
At Will

We have designed and built an electronic device which compares the resistance of a defined area of vacuum evaporated material with a variable resistor. When the two resistances are matched, the device automatically disconnects the primary side of the substrate transformer and stops further evaporation.This approach to controlled evaporation in conjunction with the modified guns and evaporation source permits reliably reproducible multiple Pt shadow films from a single Pt wrapped carbon point source. The reproducibility from consecutive C point sources is also reliable. Furthermore, the device we have developed permits us to select a predetermined resistance so that low contrast high-resolution shadows, heavy high contrast shadows, or any grade in between can be selected at will. The reproducibility and quality of results are demonstrated in Figures 1-4 which represent evaporations at various settings of the variable resistor.

Boilerplate

2012 ◽  
Author(s):  
Margaret Jane Radin
Keyword(s):  
Economic Efficiency ◽  
Analytical Framework ◽  
Daily Basis ◽  
Regulatory Agencies ◽  
Jury Trial ◽  
Comprehensive Treatment ◽  
New Methods ◽  
And Control ◽  
Fine Print

Boilerplate—the fine-print terms and conditions that we become subject to when we click “I agree” online, rent an apartment, or enter an employment contract, for example—pervades all aspects of our modern lives. On a daily basis, most of us accept boilerplate provisions without realizing that should a dispute arise about a purchased good or service, the nonnegotiable boilerplate terms can deprive us of our right to jury trial and relieve providers of responsibility for harm. Boilerplate is the first comprehensive treatment of the problems posed by the increasing use of these terms, demonstrating how their use has degraded traditional notions of consent, agreement, and contract, and sacrificed core rights whose loss threatens the democratic order. This book examines attempts to justify the use of boilerplate provisions by claiming either that recipients freely consent to them or that economic efficiency demands them, and it finds these justifications wanting. It argues that our courts, legislatures, and regulatory agencies have fallen short in their evaluation and oversight of the use of boilerplate clauses. To improve legal evaluation of boilerplate, the book offers a new analytical framework, one that takes into account the nature of the rights affected, the quality of the recipient's consent, and the extent of the use of these terms. It goes on to offer possibilities for new methods of boilerplate evaluation and control, and concludes by discussing positive steps that NGOs, legislators, regulators, courts, and scholars could take to bring about better practices.

Management and engineering solutions to improve processing stock quality and reduce resource-intensity of mining

2018 ◽  
pp. 56-68
Author(s):  
V. V. Agafonov ◽  
V. Yu. Zalyadinov ◽  
M. E. Yusupov ◽  
N. S. Bikteeva
Keyword(s):  
Development Strategy ◽  
Open Pit ◽  
Mining Operations ◽  
High Concern ◽  
General Production ◽  
Resource Intensity ◽  
Product Output ◽  
And Control ◽  
A Company

Sustainability of mining companies is of of high concern. The problem is specifically acute at companies that are monotownor monosettlement-forming. Sustainability of a mine depends in many ways on product quality and production resource-intensity. This article discusses formation of mineral quality indexes in terms of an open pit chrysotile mine. The studies took into account specific features of operation procedures implemented by each structural division of the mine. The analysis has found managerial and technological inconsistencies which affect quality and marketable product output, as well as efficiency of the mine in whole. The background for efficiency enhancement at a company is, by the authors’ opinion, consolidation of personnel subject to the single development strategy, namely: improvement of production and control efficiency, as well as use of available reserves and resources by means of better setup for production. The proposed approaches to planning mining operations and forming mineral quality allow higher quality of processing stock. In addition, a new model proposed for interaction between structural divisions of a mining company ensures improvement of general production indexes.

EFFICIENT MANAGEMENT SYSTEM OF TEACHING TECHNICAL MEANS AT CENTRAL KINDERGARTEN PEDAGOGY COLLEGE IN INDUSTRIAL REVOLUTION 4.0

2020 ◽  
Vol 9 (2) ◽  
Author(s):  
Vũ Xuân Hùng
Keyword(s):  
Intellectual Development ◽  
Industrial Revolution ◽  
Current Period ◽  
Efficient Management ◽  
Urgent Task ◽  
Creative Learning ◽  
Cognitive Activities ◽  
And Control ◽  
Technical Teaching

In the process of teaching, technical teaching facilities are both a content and a means of conveying information, they help the lecturer organize and control the students' cognitive activities, in addition, they also help students be interested in learning, practice practical skills from which to form active and creative learning methods. Teaching technology is one of the necessary conditions to help teachers carry out their related work of educating, teaching and bringing up, and intellectual development, arouse the inherent intelligence qualities of students. Currently, the management of technical teaching facilities at the Central Kindergartens College has been carried out on a regular basis and achieved certain results, but in fact, there are still many inadequacies. Finding a number of limitations in the management of teaching technical facilities, thereby proposing solutions to overcome those limitations, improve the efficiency of investment, preservation and use of teaching technical facilities in the trend of Industry Revolution 4.0, improving the quality of teaching at Central Kindergarten Pedagogy colleges in the current period is a very important and urgent task.

The Implementation of Learning Materials Based on Local Wisdom of Agricultural in Binjai to Improve the Students Problem Solving Abilities

2019 ◽  
Author(s):  
Nur Tsalits Fahman Mughni
Keyword(s):  
Problem Solving ◽  
Control Group ◽  
School Grade ◽  
Teaching Materials ◽  
Quasi Experimental ◽  
Equivalent Control ◽  
The Subject ◽  
And Control ◽  
Experimental Group

Teaching materials by integrating local culture makes easier for students to understand the subject matter in the learning process. The aims of the study is to measure the effectiveness of teaching materials based on local wisdom of agriculture in Binjai in improving the students problem solving abilities. The research method was a quasi experimental which use non equivalent control group in the pretest posttest design. The sample of study were students of Senior High School grade X in Binjai that consisted of experiment group which used teaching materials based on local wisdom of agriculture in Binjai and control group that used student handbooks. Teaching materials are tested by material experts and technology experts to ensure the quality of teaching materials. Data collection was conducted through test. The results showed that the teaching materials based on local wisdom of agriculture in Binjai effective in improving students problem solving abilities in the experimental group students based on the results of N gain value was 0.67 which has medium criteria. It means teaching materials based on agricultural local wisdom of agriculture in Binjai can be used as one of the teaching materials in learning activities.

Sign in / Sign up

Export Citation Format

Share Document