scholarly journals A prosthetic limb managed by sensors-based electronic system: Experimental results on amputees

2020 ◽  
Vol 9 (2) ◽  
Author(s):  
F. Gaetani ◽  
R. De Fazio ◽  
G. A. Zappatore ◽  
P. Visconti
Keyword(s):  
Upper Limb ◽  
High Performance ◽  
Learning Algorithm ◽  
Electronic System ◽  
Measurement Unit ◽  
Raspberry Pi ◽  
Prosthetic Limb ◽  
Flexion Extension ◽  
Rehabilitation Period ◽  
Male Subjects

Taking the advantages offered by smart high-performance electronic devices, transradial prosthesis for upper-limb amputees was developed and tested. It is equipped with sensing devices and actuators allowing hand movements; myoelectric signals are detected by Myo armband with 8 ElectroMyoGraphic (EMG) electrodes, a 9-axis Inertial Measurement Unit (IMU) and Bluetooth Low Energy (BLE) module. All data are received through HM-11 BLE transceiver by Arduino board which processes them and drives actuators. Raspberry Pi board controls a touchscreen display, providing user a feedback related to prosthesis functioning and sends EMG and IMU data, gathered via the armband, to cloud platform thus allowing orthopedic during rehabilitation period, to monitor users’ improvements in real time. A GUI software integrating a machine learning algorithm was implemented for recognizing flexion/extension/rest gestures of user fingers. The algorithm performances were tested on 9 male subjects (8 able-bodied and 1 subject affected by upper-limb amelia), demonstrating high accuracy and fast responses.

scholarly journals Measuring Upper Limb Kinematics of Forehand and Backhand Topspin Drives with IMU Sensors in Wheelchair and Able-Bodied Table Tennis Players

Sensors ◽  
2021 ◽  
Vol 21 (24) ◽  
pp. 8303
Author(s):  
Jia-Wen Yam ◽  
Jing-Wen Pan ◽  
Pui-Wah Kong
Keyword(s):  
Upper Limb ◽  
Wrist Joint ◽  
Elbow Flexion ◽  
Measurement Unit ◽  
Shoulder Abduction ◽  
Table Tennis ◽  
Tennis Players ◽  
Movement Strategies ◽  
Flexion Extension ◽  
Limb Kinematics

To better understand the biomechanics of para-table tennis players, this study compared the shoulder, elbow, and wrist joint kinematics among able-bodied (AB) and wheelchair players in different classifications. Nineteen participants (AB, n = 9; classification 1 (C1), n = 3; C2, n = 3; C3, n = 4) executed 10 forehand and backhand topspin drives. Shoulder abduction/adduction, elbow flexion/extension, wrist extension/flexion, respective range of motion (ROM), and joint patterns were obtained using inertial measurement unit (IMU) sensors. The results showed clear differences in upper limb kinematics between the able-bodied and wheelchair players, especially in the elbow and wrist. For the para-players, noticeable variations in techniques were also observed among the different disability classes. In conclusion, wheelchair players likely adopted distinct movement strategies compared to AB to compensate for their physical impairments and functional limitations. Hence, traditional table tennis programs targeting skills and techniques for able-bodied players are unsuitable for para-players. Future work can investigate how best to customize training programs and to optimize movement strategies for para-players with varied types and degrees of impairment.

scholarly journals Validation of a Low-Cost Pavement Monitoring Inertial-Based System for Urban Road Networks

Sensors ◽  
2021 ◽  
Vol 21 (9) ◽  
pp. 3127
Author(s):  
Giuseppe Loprencipe ◽  
Flavio Guilherme Vaz de Almeida Filho ◽  
Rafael Henrique de Oliveira ◽  
Salvatore Bruno
Keyword(s):  
High Performance ◽  
Ride Comfort ◽  
Inertial Sensors ◽  
Inertial Sensor ◽  
Low Cost ◽  
Road Networks ◽  
Measurement Unit ◽  
Raspberry Pi ◽  
Urban Road ◽  
Comfort Index

Road networks are monitored to evaluate their decay level and the performances regarding ride comfort, vehicle rolling noise, fuel consumption, etc. In this study, a novel inertial sensor-based system is proposed using a low-cost inertial measurement unit (IMU) and a global positioning system (GPS) module, which are connected to a Raspberry Pi Zero W board and embedded inside a vehicle to indirectly monitor the road condition. To assess the level of pavement decay, the comfort index awz defined by the ISO 2631 standard was used. Considering 21 km of roads with different levels of pavement decay, validation measurements were performed using the novel sensor, a high performance inertial based navigation sensor, and a road surface profiler. Therefore, comparisons between awz determined with accelerations measured on the two different inertial sensors are made; in addition, also correlations between awz, and typical pavement indicators such as international roughness index, and ride number were also performed. The results showed very good correlations between the awz values calculated with the two inertial devices (R2 = 0.98). In addition, the correlations between awz values and the typical pavement indices showed promising results (R2 = 0.83–0.90). The proposed sensor may be assumed as a reliable and easy-to-install method to assess the pavement conditions in urban road networks, since the use of traditional systems is difficult and/or expensive.

EFEITOS DO DEEP RUNNING SOBRE A AMPLITUDE DE MOVIMENTO E A CAPACIDADE FUNCIONAL DOS MEMBROS SUPERIORES DE MULHERES MASTECTOMIZADAS: RELATO DE CASOS

2019 ◽  
pp. 121-131
Keyword(s):  
Range Of Motion ◽  
Upper Limb ◽  
Functional Capacity ◽  
External Rotation ◽  
Treatment Protocol ◽  
Range Of Movement ◽  
Flexion Extension ◽  
Before And After ◽  
In The Beginning ◽  
And Function

Introduction: Breast cancer is the most common type of cancer among women in Brazil and in the worl. The surgical treatment procedure may cause severe morbidity in the upper limb homolateral to surgery, including the reduction of the range of motion, with consequent impairment of function. A physiotherapeutic approach has an important role in the recover range of motion and the functionality of these women, guaranteeing the occupational, domestestic, familiar and conjugated activities, and, in this way, also improving the quality of life. Objectives: To analyse chances in the shoulder's range of motion and the functional capacity of the upper limbs, promoted by the deep running procedure in women with late postoperative mastectomy. Methods: All the patients were submitted to an evaluation in the beginning and end of the treatment, including: goniometry of flexion, extension, abduction, adduction, internal and external rotation of the shoulder joint; and function capacity analysis in activities that involve the upper members by DASH questionnaire. The treatment protocol includes twelve sessions of deep running, realized twice a week, in deep pool, for 20-minute during six weeks. Results: Were submitted to treatment a total of 4 patients. Despite the improvement in the numerical values, statistically significant differences were not found on the range of movements and in the functional capacity of upper members before and after the deep running sessions in post-mastectomy women. Conclusion: Deep running had effects on the numerical values of range of movement and upper limb functionality in women in the late postoperative period of the mastectomy procedure, but without statistically significant differences.

Sitsen: Passive sitting posture sensing based on wireless devices

2021 ◽  
Vol 17 (7) ◽  
pp. 155014772110248
Author(s):  
Miaoyu Li ◽  
Zhuohan Jiang ◽  
Yutong Liu ◽  
Shuheng Chen ◽  
Marcin Wozniak ◽  
...  
Keyword(s):  
Radio Frequency ◽  
Radio Frequency Identification ◽  
High Performance ◽  
Learning Algorithm ◽  
Low Cost ◽  
Recognition System ◽  
Sitting Posture ◽  
Average Accuracy ◽  
Phase Variations ◽  
Window Approach

Physical health diseases caused by wrong sitting postures are becoming increasingly serious and widespread, especially for sedentary students and workers. Existing video-based approaches and sensor-based approaches can achieve high accuracy, while they have limitations like breaching privacy and relying on specific sensor devices. In this work, we propose Sitsen, a non-contact wireless-based sitting posture recognition system, just using radio frequency signals alone, which neither compromises the privacy nor requires using various specific sensors. We demonstrate that Sitsen can successfully recognize five habitual sitting postures with just one lightweight and low-cost radio frequency identification tag. The intuition is that different postures induce different phase variations. Due to the received phase readings are corrupted by the environmental noise and hardware imperfection, we employ series of signal processing schemes to obtain clean phase readings. Using the sliding window approach to extract effective features of the measured phase sequences and employing an appropriate machine learning algorithm, Sitsen can achieve robust and high performance. Extensive experiments are conducted in an office with 10 volunteers. The result shows that our system can recognize different sitting postures with an average accuracy of 97.02%.

scholarly journals An IoT-Focused Intrusion Detection System Approach Based on Preprocessing Characterization for Cybersecurity Datasets

Sensors ◽  
2021 ◽  
Vol 21 (2) ◽  
pp. 656
Author(s):  
Xavier Larriva-Novo ◽  
Víctor A. Villagrá ◽  
Mario Vega-Barbas ◽  
Diego Rivera ◽  
Mario Sanz Rodrigo
Keyword(s):  
Machine Learning ◽  
Intrusion Detection ◽  
High Performance ◽  
Learning Algorithm ◽  
Detection System ◽  
Machine Learning Algorithms ◽  
Statistical Characteristics ◽  
Detection Techniques ◽  
Traffic Characteristics ◽  
Benchmark Datasets

Security in IoT networks is currently mandatory, due to the high amount of data that has to be handled. These systems are vulnerable to several cybersecurity attacks, which are increasing in number and sophistication. Due to this reason, new intrusion detection techniques have to be developed, being as accurate as possible for these scenarios. Intrusion detection systems based on machine learning algorithms have already shown a high performance in terms of accuracy. This research proposes the study and evaluation of several preprocessing techniques based on traffic categorization for a machine learning neural network algorithm. This research uses for its evaluation two benchmark datasets, namely UGR16 and the UNSW-NB15, and one of the most used datasets, KDD99. The preprocessing techniques were evaluated in accordance with scalar and normalization functions. All of these preprocessing models were applied through different sets of characteristics based on a categorization composed by four groups of features: basic connection features, content characteristics, statistical characteristics and finally, a group which is composed by traffic-based features and connection direction-based traffic characteristics. The objective of this research is to evaluate this categorization by using various data preprocessing techniques to obtain the most accurate model. Our proposal shows that, by applying the categorization of network traffic and several preprocessing techniques, the accuracy can be enhanced by up to 45%. The preprocessing of a specific group of characteristics allows for greater accuracy, allowing the machine learning algorithm to correctly classify these parameters related to possible attacks.

scholarly journals Personalized Human Activity Recognition Based on Integrated Wearable Sensor and Transfer Learning

Sensors ◽  
2021 ◽  
Vol 21 (3) ◽  
pp. 885 ◽  
Author(s):  
Zhongzheng Fu ◽  
Xinrun He ◽  
Enkai Wang ◽  
Jun Huo ◽  
Jian Huang ◽  
...  
Keyword(s):  
Transfer Learning ◽  
Activity Recognition ◽  
Human Activity ◽  
Sensor Node ◽  
Learning Algorithm ◽  
Joint Probability ◽  
Human Activity Recognition ◽  
Sensor Technology ◽  
Measurement Unit ◽  
Wearable Sensor

Human activity recognition (HAR) based on the wearable device has attracted more attention from researchers with sensor technology development in recent years. However, personalized HAR requires high accuracy of recognition, while maintaining the model’s generalization capability is a major challenge in this field. This paper designed a compact wireless wearable sensor node, which combines an air pressure sensor and inertial measurement unit (IMU) to provide multi-modal information for HAR model training. To solve personalized recognition of user activities, we propose a new transfer learning algorithm, which is a joint probability domain adaptive method with improved pseudo-labels (IPL-JPDA). This method adds the improved pseudo-label strategy to the JPDA algorithm to avoid cumulative errors due to inaccurate initial pseudo-labels. In order to verify our equipment and method, we use the newly designed sensor node to collect seven daily activities of 7 subjects. Nine different HAR models are trained by traditional machine learning and transfer learning methods. The experimental results show that the multi-modal data improve the accuracy of the HAR system. The IPL-JPDA algorithm proposed in this paper has the best performance among five HAR models, and the average recognition accuracy of different subjects is 93.2%.

scholarly journals Research on Distance Transform and Neural Network Lidar Information Sampling Classification-Based Semantic Segmentation of 2D Indoor Room Maps

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1365
Author(s):  
Tao Zheng ◽  
Zhizhao Duan ◽  
Jin Wang ◽  
Guodong Lu ◽  
Shengjie Li ◽  
...  
Keyword(s):  
Neural Network ◽  
High Speed ◽  
High Performance ◽  
High Efficiency ◽  
Semantic Segmentation ◽  
Raspberry Pi ◽  
Distance Transform ◽  
Testing Stage ◽  
Sampling Points ◽  
Information Sampling

Semantic segmentation of room maps is an essential issue in mobile robots’ execution of tasks. In this work, a new approach to obtain the semantic labels of 2D lidar room maps by combining distance transform watershed-based pre-segmentation and a skillfully designed neural network lidar information sampling classification is proposed. In order to label the room maps with high efficiency, high precision and high speed, we have designed a low-power and high-performance method, which can be deployed on low computing power Raspberry Pi devices. In the training stage, a lidar is simulated to collect the lidar detection line maps of each point in the manually labelled map, and then we use these line maps and the corresponding labels to train the designed neural network. In the testing stage, the new map is first pre-segmented into simple cells with the distance transformation watershed method, then we classify the lidar detection line maps with the trained neural network. The optimized areas of sparse sampling points are proposed by using the result of distance transform generated in the pre-segmentation process to prevent the sampling points selected in the boundary regions from influencing the results of semantic labeling. A prototype mobile robot was developed to verify the proposed method, the feasibility, validity, robustness and high efficiency were verified by a series of tests. The proposed method achieved higher scores in its recall, precision. Specifically, the mean recall is 0.965, and mean precision is 0.943.

scholarly journals Development of an Automatic Functional Movement Screening System with Inertial Measurement Unit Sensors

2020 ◽  
Vol 11 (1) ◽  
pp. 96
Author(s):  
Wen-Lan Wu ◽  
Meng-Hua Lee ◽  
Hsiu-Tao Hsu ◽  
Wen-Hsien Ho ◽  
Jing-Min Liang
Keyword(s):  
Feature Selection ◽  
Inertial Measurement Unit ◽  
Learning Algorithm ◽  
Kappa Statistic ◽  
Weighted Kappa ◽  
Classification Model ◽  
Measurement Unit ◽  
Functional Movement ◽  
Inertial Measurement ◽  
Movement Screening

Background: In this study, an automatic scoring system for the functional movement screen (FMS) was developed. Methods: Thirty healthy adults fitted with full-body inertial measurement unit sensors completed six FMS exercises. The system recorded kinematics data, and a professional athletic trainer graded each participant. To reduce the number of input variables for the predictive model, ordinal logistic regression was used for subset feature selection. The ensemble learning algorithm AdaBoost.M1 was used to construct classifiers. Accuracy and F score were used for classification model evaluation. The consistency between automatic and manual scoring was assessed using a weighted kappa statistic. Results: When all the features were used, the predict model presented moderate to high accuracy, with kappa values between fair to very good agreement. After feature selection, model accuracy decreased about 10%, with kappa values between poor to moderate agreement. Conclusions: The results indicate that higher prediction accuracy was achieved using the full feature set compared with using the reduced feature set.

scholarly journals Ankle Angle Prediction Using a Footwear Pressure Sensor and a Machine Learning Technique

Sensors ◽  
2021 ◽  
Vol 21 (11) ◽  
pp. 3790
Author(s):  
Zachary Choffin ◽  
Nathan Jeong ◽  
Michael Callihan ◽  
Savannah Olmstead ◽  
Edward Sazonov ◽  
...  
Keyword(s):  
Machine Learning ◽  
Pressure Sensor ◽  
Learning Algorithm ◽  
Flexible Substrate ◽  
Ankle Injuries ◽  
Sensor System ◽  
Measurement Unit ◽  
K Nearest Neighbor ◽  
Machine Learning Technique ◽  
Learning Technique

Ankle injuries may adversely increase the risk of injury to the joints of the lower extremity and can lead to various impairments in workplaces. The purpose of this study was to predict the ankle angles by developing a footwear pressure sensor and utilizing a machine learning technique. The footwear sensor was composed of six FSRs (force sensing resistors), a microcontroller and a Bluetooth LE chipset in a flexible substrate. Twenty-six subjects were tested in squat and stoop motions, which are common positions utilized when lifting objects from the floor and pose distinct risks to the lifter. The kNN (k-nearest neighbor) machine learning algorithm was used to create a representative model to predict the ankle angles. For the validation, a commercial IMU (inertial measurement unit) sensor system was used. The results showed that the proposed footwear pressure sensor could predict the ankle angles at more than 93% accuracy for squat and 87% accuracy for stoop motions. This study confirmed that the proposed plantar sensor system is a promising tool for the prediction of ankle angles and thus may be used to prevent potential injuries while lifting objects in workplaces.

Sign in / Sign up

Export Citation Format

Share Document