scholarly journals Photoacoustic technology for biological tissues characterization

2020 ◽  
Vol 9 (6) ◽  
pp. 2601-2608
Author(s):  
Hui Ling Chua ◽  
Audrey Huong
Keyword(s):  
Signal To Noise Ratio ◽  
Photoacoustic Signal ◽  
Biological Tissues ◽  
Imaging Systems ◽  
Label Free ◽  
Fat Tissue ◽  
Imaging Characteristic ◽  
Fat Liver ◽  
Made In

The existing photoacoustics (PA) imaging systems showed mixed performance in imaging characteristic and signal-to-noise ratio (SNR). This work presents the use of an in-house assembled PA system using a modulating laser beam of wavelength 633 nm for two-dimensional (2D) characterization of biological tissues. The differentiation of the tissues in this work is based on differences in their light absorption, wherein the produced photoacoustic signal detected by a transducer was translated into phase value that corresponds to the peak amplitude of optical absorption of tissue namely fat, liver and muscle. This work found fat tissue to produce the strongest PA signal with mean ± standard deviation (SD) phase value = 2.09 ± 0.31 while muscle produced the least signal with phase value = 1.03 ± 0.17. This work discovered the presence of stripes pattern in the reconstructed images of fat and muscle resulted from their structural properties. In addition, a comparison is made in an attempt to better assess the performance of the developed system with the related ones. This work concluded that the developed system may use as an alternative, noninvasive and label-free visualization method for characterization of biological tissues in the future.

Application of high-resolution label-free imaging methods to obtain tissue images for histological analysis/Anwendung hochauflösender markierungsfreier Bildgebungsverfahren zur histologischen Analyse von Gewebebildern

2013 ◽  
Vol 2 (2) ◽  
Author(s):  
Yuxiang Wu ◽  
Wenyan Hu ◽  
Ling Fu ◽  
Xiaohua Lv ◽  
Shaoqun Zeng
Keyword(s):  
Gold Standard ◽  
Histological Analysis ◽  
Clinical Work ◽  
Biological Tissues ◽  
Label Free ◽  
Practical Procedure ◽  
Whole Process ◽  
Histological Results ◽  
Good Contrast ◽  
Made In

AbstractIn routine clinical work, classical histology is regarded as the gold standard for the discrimination of healthy and pathological tissue. However, the whole process can be tediously long and has some restraints. As a result, under most conditions, doctors have to wait for the histological results until decisions can be made. In this paper, a practical procedure of tissue preprocess, serial section, label-free imaging and image analysis is demonstrated, which costs less time and could give sufficiently good contrast to obtain information about cellular structure and organization of biological tissues.

Bioactivity of Marine Natural Product Xyloketals

2020 ◽  
Vol 17 ◽  
Author(s):  
Biswajit Panda ◽  
Amal Kumar Gooyee
Keyword(s):  
Natural Products ◽  
Marine Natural Product ◽  
Ischemic Brain Injury ◽  
Ischemic Brain ◽  
Activity Inhibition ◽  
Life Saving ◽  
Behavior Suppression ◽  
Major Emphasis ◽  
Made In

: Oceans can play a major role in supplying life-saving medicines in the world in future. Although considerable progress has been made in finding new medicines from marine sources, large efforts are still necessary to examine such molecules for clinical applications. Xyloketals are an important group of natural products with various powerful and prominent bioactivities such as inhibition of acetylcholine esterase, antioxidant activity, inhibition of L-calcium channels, radicalscavenging behavior, suppression of cell proliferation, reduction of neonatal hypoxic-ischemic brain injury, etc. This review describes the isolation and structural characterization of all xyloketal natural products giving major emphasis on their bioactivity.

Characterization of Auditory Disability and Its Relation to the Resilience

2018 ◽  
Vol 5 (2) ◽  
pp. 15
Author(s):  
Bibian Bibeca Bumbila García ◽  
Hernán Andrés Cedeño Cedeño ◽  
Tatiana Moreira Chica ◽  
Yaritza Rossana Parrales Ríos
Keyword(s):  
Social Integration ◽  
Conceptual Analysis ◽  
Disabled People ◽  
Disabled Students ◽  
Hearing Disability ◽  
Technical University ◽  
The Relationship ◽  
Made In

The objective of the work is to establish the characterization of the auditory disability and its relationship with resilience at the Technical University of Manabí. The article shows a conceptual analysis related to the inclusion and social integration of disabled students. Based on the fact that the person with disabilities grows and develops in the same way as that of people without disabilities and what usually happens is that disabled people are rejected and discriminated against based on a prefabricated and erroneous conceptualization of these people. The results associated with the application of the SV-RES test prepared by the researchers are shown (Saavedra & Villalta, 2008b). Characterization of the auditory deficit is made in the students, and the limitations that derive from it are pointed out. We analyze the particularities related to communication with students who have a hearing disability and resilience in this type of student, where some personal highlights that in this sense constitute an example of resilience. Finally, the results related to the study of the relationship between students' hearing disability and the level of resilience dimensions are shown.

scholarly journals 3D phonon microscopy with sub-micron axial-resolution

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Richard J. Smith ◽  
Fernando Pérez-Cota ◽  
Leonel Marques ◽  
Matt Clark
Keyword(s):  
Signal To Noise Ratio ◽  
Single Cells ◽  
Optical Resolution ◽  
Acquisition Time ◽  
Label Free ◽  
Axial Resolution ◽  
Force Microscopy ◽  
Atomic Force ◽  
Accuracy And Precision ◽  
Good Agreement

AbstractBrillouin light scattering (BLS) is an emerging method for cell imaging and characterisation. It allows elasticity-related contrast, optical resolution and label-free operation. Phonon microscopy detects BLS from laser generated coherent phonon fields to offer an attractive route for imaging since, at GHz frequencies, the phonon wavelength is sub-optical. Using phonon fields to image single cells is challenging as the signal to noise ratio and acquisition time are often poor. However, recent advances in the instrumentation have enabled imaging of fixed and living cells. This work presents the first experimental characterisation of phonon-based axial resolution provided by the response to a sharp edge. The obtained axial resolution is up to 10 times higher than that of the optical system used to take the measurements. Validation of the results are obtained with various polymer objects, which are in good agreement with those obtained using atomic force microscopy. Edge localisation, and hence profilometry, of a phantom boundary is measured with accuracy and precision of approximately 60 nm and 100 nm respectively. Finally, 3D imaging of fixed cells in culture medium is demonstrated.

scholarly journals A Universal Model for the Log-Normal Distribution of Elasticity in Polymeric Gels and Its Relevance to Mechanical Signature of Biological Tissues

Biology ◽  
2021 ◽  
Vol 10 (1) ◽  
pp. 64
Author(s):  
Arnaud Millet
Keyword(s):  
Elastic Modulus ◽  
Normal Distribution ◽  
Biological Tissues ◽  
Force Microscopy ◽  
Polymeric Gels ◽  
Atomic Force ◽  
Clear Explanation ◽  
Log Normal ◽  
Log Normal Distribution

The mechanosensitivity of cells has recently been identified as a process that could greatly influence a cell’s fate. To understand the interaction between cells and their surrounding extracellular matrix, the characterization of the mechanical properties of natural polymeric gels is needed. Atomic force microscopy (AFM) is one of the leading tools used to characterize mechanically biological tissues. It appears that the elasticity (elastic modulus) values obtained by AFM presents a log-normal distribution. Despite its ubiquity, the log-normal distribution concerning the elastic modulus of biological tissues does not have a clear explanation. In this paper, we propose a physical mechanism based on the weak universality of critical exponents in the percolation process leading to gelation. Following this, we discuss the relevance of this model for mechanical signatures of biological tissues.

scholarly journals Characterization of Liposomes Using Quantitative Phase Microscopy (QPM)

Pharmaceutics ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 590
Author(s):  
Jennifer Cauzzo ◽  
Nikhil Jayakumar ◽  
Balpreet Singh Ahluwalia ◽  
Azeem Ahmad ◽  
Nataša Škalko-Basnet
Keyword(s):  
Rapid Development ◽  
Fluorescent Labeling ◽  
Label Free ◽  
Batch Mode ◽  
Full Field ◽  
Quantitative Phase ◽  
Phase Microscopy ◽  
Quantitative Phase Microscopy ◽  
Tracking Ability

The rapid development of nanomedicine and drug delivery systems calls for new and effective characterization techniques that can accurately characterize both the properties and the behavior of nanosystems. Standard methods such as dynamic light scattering (DLS) and fluorescent-based assays present challenges in terms of system’s instability, machine sensitivity, and loss of tracking ability, among others. In this study, we explore some of the downsides of batch-mode analyses and fluorescent labeling, while introducing quantitative phase microscopy (QPM) as a label-free complimentary characterization technique. Liposomes were used as a model nanocarrier for their therapeutic relevance and structural versatility. A successful immobilization of liposomes in a non-dried setup allowed for static imaging conditions in an off-axis phase microscope. Image reconstruction was then performed with a phase-shifting algorithm providing high spatial resolution. Our results show the potential of QPM to localize subdiffraction-limited liposomes, estimate their size, and track their integrity over time. Moreover, QPM full-field-of-view images enable the estimation of a single-particle-based size distribution, providing an alternative to the batch mode approach. QPM thus overcomes some of the drawbacks of the conventional methods, serving as a relevant complimentary technique in the characterization of nanosystems.

scholarly journals Continuous-Wave THz Imaging for Biomedical Samples

2020 ◽  
Vol 11 (1) ◽  
pp. 71
Author(s):  
Yaya Zhang ◽  
Chuting Wang ◽  
Bingxin Huai ◽  
Shiyu Wang ◽  
Yating Zhang ◽  
...  
Keyword(s):  
Medical Imaging ◽  
Biomedical Imaging ◽  
Continuous Wave ◽  
Biological Tissues ◽  
Thz Spectroscopy ◽  
Label Free ◽  
Thz Imaging ◽  
Malignant Tumours ◽  
Advantages And Disadvantages ◽  
Imaging Application

In the past few decades, the applications of terahertz (THz) spectroscopy and imaging technology have seen significant developments in the fields of biology, medical diagnosis, food safety, and nondestructive testing. Label-free diagnosis of malignant tumours has been obtained and also achieved significant development in THz biomedical imaging. This review mainly presents the research status and prospects of several common continuous-wave (CW) THz medical imaging systems and applications of THz medical imaging in biological tissues. Here, we first introduce the properties of THz waves and how these properties play a role in biomedical imaging. Then, we analyse both the advantages and disadvantages of the CW THz imaging methods and the progress of these methods in THz biomedical imaging in recent ten years. Finally, we summarise the obstacles in the way of the application of THz bio-imaging application technology in clinical detection, which need to be investigated and overcome in the future.

scholarly journals Microfluidic Tools for Enhanced Characterization of Therapeutic Stem Cells and Prediction of Their Potential Antimicrobial Secretome

Antibiotics ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 750
Author(s):  
Pasquale Marrazzo ◽  
Valeria Pizzuti ◽  
Silvia Zia ◽  
Azzurra Sargenti ◽  
Daniele Gazzola ◽  
...  
Keyword(s):  
Stem Cells ◽  
Defense Mechanisms ◽  
Live Cells ◽  
Label Free ◽  
Bacterial Diseases ◽  
Prospective Application ◽  
Therapy Strategies ◽  
Stromal Stem Cells ◽  
Different Sources

Antibiotic resistance is creating enormous attention on the development of new antibiotic-free therapy strategies for bacterial diseases. Mesenchymal stromal stem cells (MSCs) are the most promising candidates in current clinical trials and included in several cell-therapy protocols. Together with the well-known immunomodulatory and regenerative potential of the MSC secretome, these cells have shown direct and indirect anti-bacterial effects. However, the low reproducibility and standardization of MSCs from different sources are the current limitations prior to the purification of cell-free secreted antimicrobial peptides and exosomes. In order to improve MSC characterization, novel label-free functional tests, evaluating the biophysical properties of the cells, will be advantageous for their cell profiling, population sorting, and quality control. We discuss the potential of emerging microfluidic technologies providing new insights into density, shape, and size of live cells, starting from heterogeneous or 3D cultured samples. The prospective application of these technologies to studying MSC populations may contribute to developing new biopharmaceutical strategies with a view to naturally overcoming bacterial defense mechanisms.

scholarly journals Characterization of Recombinant Adeno-Associated Viruses (rAAVs) for Gene Therapy Using Orthogonal Techniques

Pharmaceutics ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 586
Author(s):  
Liam Cole ◽  
Diogo Fernandes ◽  
Maryam T. Hussain ◽  
Michael Kaszuba ◽  
John Stenson ◽  
...  
Keyword(s):  
Gene Therapy ◽  
Light Scattering ◽  
Dynamic Light Scattering ◽  
Viral Vector ◽  
Structural Characteristics ◽  
Genetic Material ◽  
Label Free ◽  
Gene Therapies ◽  
Multiple Challenges

Viruses are increasingly used as vectors for delivery of genetic material for gene therapy and vaccine applications. Recombinant adeno-associated viruses (rAAVs) are a class of viral vector that is being investigated intensively in the development of gene therapies. To develop efficient rAAV therapies produced through controlled and economical manufacturing processes, multiple challenges need to be addressed starting from viral capsid design through identification of optimal process and formulation conditions to comprehensive quality control. Addressing these challenges requires fit-for-purpose analytics for extensive characterization of rAAV samples including measurements of capsid or particle titer, percentage of full rAAV particles, particle size, aggregate formation, thermal stability, genome release, and capsid charge, all of which may impact critical quality attributes of the final product. Importantly, there is a need for rapid analytical solutions not relying on the use of dedicated reagents and costly reference standards. In this study, we evaluate the capabilities of dynamic light scattering, multiangle dynamic light scattering, and SEC–MALS for analyses of rAAV5 samples in a broad range of viral concentrations (titers) at different levels of genome loading, sample heterogeneity, and sample conditions. The study shows that DLS and MADLS® can be used to determine the size of full and empty rAAV5 (27 ± 0.3 and 33 ± 0.4 nm, respectively). A linear range for rAAV5 size and titer determination with MADLS was established to be 4.4 × 1011–8.7 × 1013 cp/mL for the nominally full rAAV5 samples and 3.4 × 1011–7 × 1013 cp/mL for the nominally empty rAAV5 samples with 3–8% and 10–37% CV for the full and empty rAAV5 samples, respectively. The structural stability and viral load release were also inferred from a combination of DLS, SEC–MALS, and DSC. The structural characteristics of the rAAV5 start to change from 40 °C onward, with increasing aggregation observed. With this study, we explored and demonstrated the applicability and value of orthogonal and complementary label-free technologies for enhanced serotype-independent characterization of key properties and stability profiles of rAAV5 samples.

Sign in / Sign up

Export Citation Format

Share Document