“We Do the Social”

Abstract The ethnographic study was conducted in the unplanned settlement of Adjahui, which is located in Port Bouët municipality of the Abidjan metropolis, Côte d’Ivoire, where, after a short period of self-building activities, rental housing was constructed on a massive scale. We asked about the motivations behind these investments into the lowest price segment of rentals in Abidjan and their property management. Findings from interviews with 12 estate agents revealed that small-scale private investors from the middle class and West African migrant background speculated with low-cost housing under extra-legal conditions to accumulate or maintain their wealth. These entrepreneurial landlords delegated construction of courtyard houses and property management to local non-accredited estate agencies. While the deals between investors and estate agents were driven by profit, the occupational history of the estate agents showed how they randomly moved into this business. Their work was also socially motivated, as they expressed responsibility for their customers, who could not afford other rental housing. The paper will discuss how the investments reduced the quantitative deficit in low-cost rental housing.

Download Full-text

Tools of Transformation: Appropriate Technology in U.S. Countercultural Literature

American Studies in Scandinavia ◽

10.22439/asca.v44i2.4917 ◽

2012 ◽

Vol 44 (2) ◽

pp. 75-93

Author(s):

Peter Mortensen

Keyword(s):

Low Cost ◽

Appropriate Technology ◽

Small Scale ◽

Environmental Transformation ◽

Buckminster Fuller ◽

1960S And 1970S ◽

The 1960S ◽

Environmentally Sound ◽

User Friendly ◽

Second Wave

This essay takes its cue from second-wave ecocriticism and from recent scholarly interest in the “appropriate technology” movement that evolved during the 1960s and 1970s in California and elsewhere. “Appropriate technology” (or AT) refers to a loosely-knit group of writers, engineers and designers active in the years around 1970, and more generally to the counterculture’s promotion, development and application of technologies that were small-scale, low-cost, user-friendly, human-empowering and environmentally sound. Focusing on two roughly contemporary but now largely forgotten American texts Sidney Goldfarb’s lyric poem “Solar-Heated-Rhombic-Dodecahedron” (1969) and Gurney Norman’s novel Divine Right’s Trip (1971)—I consider how “hip” literary writers contributed to eco-technological discourse and argue for the 1960s counterculture’s relevance to present-day ecological concerns. Goldfarb’s and Norman’s texts interest me because they conceptualize iconic 1960s technologies—especially the Buckminster Fuller-inspired geodesic dome and the Volkswagen van—not as inherently alienating machines but as tools of profound individual, social and environmental transformation. Synthesizing antimodernist back-to-nature desires with modernist enthusiasm for (certain kinds of) machinery, these texts adumbrate a humanity- and modernity-centered post-wilderness model of environmentalism that resonates with the dilemmas that we face in our increasingly resource-impoverished, rapidly warming and densely populated world.

Download Full-text

Rapid, large-scale species discovery in hyperdiverse taxa using 1D MinION sequencing

BMC Biology ◽

10.1186/s12915-019-0706-9 ◽

2019 ◽

Vol 17 (1) ◽

Cited By ~ 17

Author(s):

Amrita Srivathsan ◽

Emily Hartop ◽

Jayanthi Puniamoorthy ◽

Wan Ting Lee ◽

Sujatha Narayanan Kutty ◽

...

Keyword(s):

Dna Sequences ◽

Large Scale ◽

Low Cost ◽

Small Body ◽

Small Subset ◽

Similar Species ◽

Large Species ◽

Morphological Examination ◽

Species Discovery ◽

Short Period

Abstract Background More than 80% of all animal species remain unknown to science. Most of these species live in the tropics and belong to animal taxa that combine small body size with high specimen abundance and large species richness. For such clades, using morphology for species discovery is slow because large numbers of specimens must be sorted based on detailed microscopic investigations. Fortunately, species discovery could be greatly accelerated if DNA sequences could be used for sorting specimens to species. Morphological verification of such “molecular operational taxonomic units” (mOTUs) could then be based on dissection of a small subset of specimens. However, this approach requires cost-effective and low-tech DNA barcoding techniques because well-equipped, well-funded molecular laboratories are not readily available in many biodiverse countries. Results We here document how MinION sequencing can be used for large-scale species discovery in a specimen- and species-rich taxon like the hyperdiverse fly family Phoridae (Diptera). We sequenced 7059 specimens collected in a single Malaise trap in Kibale National Park, Uganda, over the short period of 8 weeks. We discovered > 650 species which exceeds the number of phorid species currently described for the entire Afrotropical region. The barcodes were obtained using an improved low-cost MinION pipeline that increased the barcoding capacity sevenfold from 500 to 3500 barcodes per flowcell. This was achieved by adopting 1D sequencing, resequencing weak amplicons on a used flowcell, and improving demultiplexing. Comparison with Illumina data revealed that the MinION barcodes were very accurate (99.99% accuracy, 0.46% Ns) and thus yielded very similar species units (match ratio 0.991). Morphological examination of 100 mOTUs also confirmed good congruence with morphology (93% of mOTUs; > 99% of specimens) and revealed that 90% of the putative species belong to the neglected, megadiverse genus Megaselia. We demonstrate for one Megaselia species how the molecular data can guide the description of a new species (Megaselia sepsioides sp. nov.). Conclusions We document that one field site in Africa can be home to an estimated 1000 species of phorids and speculate that the Afrotropical diversity could exceed 200,000 species. We furthermore conclude that low-cost MinION sequencers are very suitable for reliable, rapid, and large-scale species discovery in hyperdiverse taxa. MinION sequencing could quickly reveal the extent of the unknown diversity and is especially suitable for biodiverse countries with limited access to capital-intensive sequencing facilities.

Download Full-text

Development of a simplified gas ultracleaning process: experiments in biomass residue-based fixed-bed gasification syngas

Biomass Conversion and Biorefinery ◽

10.1007/s13399-021-01680-x ◽

2021 ◽

Author(s):

Christian Frilund ◽

Esa Kurkela ◽

Ilkka Hiltunen

Keyword(s):

Activated Carbons ◽

Low Cost ◽

Fixed Bed ◽

Carbonyl Sulfide ◽

Gas Analysis ◽

Small Scale ◽

Cleaning Process ◽

Medium Temperature ◽

Gas Cleaning ◽

Adsorption Affinity

AbstractFor the realization of small-scale biomass-to-liquid (BTL) processes, low-cost syngas cleaning remains a major obstacle, and for this reason a simplified gas ultracleaning process is being developed. In this study, a low- to medium-temperature final gas cleaning process based on adsorption and organic solvent-free scrubbing methods was coupled to a pilot-scale staged fixed-bed gasification facility including hot filtration and catalytic reforming steps for extended duration gas cleaning tests for the generation of ultraclean syngas. The final gas cleaning process purified syngas from woody and agricultural biomass origin to a degree suitable for catalytic synthesis. The gas contained up to 3000 ppm of ammonia, 1300 ppm of benzene, 200 ppm of hydrogen sulfide, 10 ppm of carbonyl sulfide, and 5 ppm of hydrogen cyanide. Post-run characterization displayed that the accumulation of impurities on the Cu-based deoxygenation catalyst (TOS 105 h) did not occur, demonstrating that effective main impurity removal was achieved in the first two steps: acidic water scrubbing (AWC) and adsorption by activated carbons (AR). In the final test campaign, a comprehensive multipoint gas analysis confirmed that ammonia was fully removed by the scrubbing step, and benzene and H2S were fully removed by the subsequent activated carbon beds. The activated carbons achieved > 90% removal of up to 100 ppm of COS and 5 ppm of HCN in the syngas. These results provide insights into the adsorption affinity of activated carbons in a complex impurity matrix, which would be arduous to replicate in laboratory conditions.

Download Full-text

Understanding Spatial Variability of NO2 in Urban Areas Using Spatial Modelling and Data Fusion Approaches

Atmosphere ◽

10.3390/atmos12020179 ◽

2021 ◽

Vol 12 (2) ◽

pp. 179

Author(s):

Said Munir ◽

Martin Mayfield ◽

Daniel Coca

Keyword(s):

Data Fusion ◽

Spatial Variability ◽

Urban Areas ◽

Road Traffic ◽

Dispersion Model ◽

Low Cost ◽

Spatial Modelling ◽

City Centre ◽

Small Scale ◽

The City

Small-scale spatial variability in NO2 concentrations is analysed with the help of pollution maps. Maps of NO2 estimated by the Airviro dispersion model and land use regression (LUR) model are fused with measured NO2 concentrations from low-cost sensors (LCS), reference sensors and diffusion tubes. In this study, geostatistical universal kriging was employed for fusing (integrating) model estimations with measured NO2 concentrations. The results showed that the data fusion approach was capable of estimating realistic NO2 concentration maps that inherited spatial patterns of the pollutant from the model estimations and adjusted the modelled values using the measured concentrations. Maps produced by the fusion of NO2-LCS with NO2-LUR produced better results, with r-value 0.96 and RMSE 9.09. Data fusion adds value to both measured and estimated concentrations: the measured data are improved by predicting spatiotemporal gaps, whereas the modelled data are improved by constraining them with observed data. Hotspots of NO2 were shown in the city centre, eastern parts of the city towards the motorway (M1) and on some major roads. Air quality standards were exceeded at several locations in Sheffield, where annual mean NO2 levels were higher than 40 µg/m3. Road traffic was considered to be the dominant emission source of NO2 in Sheffield.

Download Full-text

A low-cost technique to measure bank erosion proces ses along middle-size river reaches

10.5194/esurf-2018-3 ◽

2018 ◽

Author(s):

Gonzalo Duró ◽

Alessandra Crosato ◽

Maarten G. Kleinhans ◽

Wim S. J. Uijttewaal

Keyword(s):

Laser Scanning ◽

Spatial Scales ◽

Low Cost ◽

Bank Erosion ◽

Water Levels ◽

Small Scale ◽

Observation Distance ◽

River Bank ◽

Erosion Processes ◽

Rtk Gps

Abstract. Diverse methods are currently available to measure river bank erosion at broad-ranging temporal and spatial scales. Yet, no technique provides low-cost and high-resolution to survey small-scale bank processes along a river reach. We investigate the capabilities of Structure-from-Motion photogrammetry applied with imagery from an Unmanned Aerial Vehicle (UAV) to describe the evolution of riverbank profiles in middle-size rivers. The bank erosion cycle is used as a reference to assess the applicability of different techniques. We surveyed 1.2 km of a restored bank of the Meuse River eight times within a year, combining different photograph perspectives and overlaps to identify an efficient UAV flight to monitor banks. The accuracy of the Digital Surface Models (DSMs) was evaluated compared with RTK GPS points and an Airborne Laser Scanning (ALS) of the whole reach. An oblique perspective with eight photo overlaps was sufficient to achieve the highest relative precision to observation distance of ~1:1400, with 10 cm error range. A complementary nadiral view increased coverage behind bank toe vegetation. The DSM and ALS had comparable accuracies except on banks, where the latter overestimates elevations. Sequential DSMs captured signatures of the erosion cycle such as mass failures, slump-block deposition, and bank undermining. Although this technique requires low water levels and banks without dense vegetation, it is a low-cost method to survey reach-scale riverbanks in sufficient resolution to quantify bank retreat and identify morphological features of the bank failure and erosion processes.

Download Full-text

Integrated Process for Textile Cotton Waste (TCW) Valorization: Waste-to-Energy and Wastewater Decontamination

Volume 6B: Energy ◽

10.1115/imece2016-66706 ◽

2016 ◽

Author(s):

A. Ribeiro ◽

C. Vilarinho ◽

J. Araújo ◽

J. Carvalho

Keyword(s):

Raw Materials ◽

Removal Rate ◽

Low Cost ◽

Calorific Value ◽

Waste To Energy ◽

Synthetic Wastewater ◽

Small Scale ◽

World Population ◽

Cotton Waste ◽

Textile Industries

The increasing of world population, industrialization and global consuming, existing market products existed in the along with diversification of raw materials, are responsible for an exponential increase of wastes. This scenario represents loss of resources and ultimately causes air, soils and water pollution. Therefore, proper waste management is currently one of the major challenges faced by modern societies. Textile industries represents, in Portugal, almost 10% of total productive transforming sector and 19% of total employments in the sector composed by almost 7.000 companies. One of the main environmental problems of textile industries is the production of significant quantities of wastes from its different processing steps. According to the Portuguese Institute of Statistics (INE) these industries produce almost 500.000 tons of wastes each year, with the textile cotton waste (TCW) being the most expressive. It was estimated that 4.000 tons of TCW are produced each year in Portugal. In this work an integrated TCW valorisation procedure was evaluated, firstly by its thermal and energetic valorisation with slow pyrolysis followed by the utilization of biochar by-product, in lead and chromium synthetic wastewater decontamination. Pyrolysis experiments were conducted in a small scale rotating pyrolysis reactor with 0.1 m3 of total capacity. Results of pyrolysis experiments showed the formation of 0,241 m3 of biogas for each kilogram of TCW. Results also demonstrated that the biogas is mostly composed by hydrogen (22%), methane (14 %), carbon monoxide (20%) and carbon dioxide (12%), which represents a total high calorific value of 12.3 MJ/Nm3. Regarding biochar, results of elemental analysis demonstrated a high percentage of carbon driving its use as low cost adsorbent. Adsorption experiments were conducted with lead and chromium synthetic wastewaters (25, 50 and 100 mg L−1) in batch vessels with controlled pH. It was evaluated the behaviour of adsorption capacity and removal rate of each metal during 120 minutes of contact time using 5, 10 and 50 g L−1 of adsorbent dosage. Results indicated high affinity of adsorbent with each tested metal with 78% of removal rate in chromium and 95% in lead experiments. This suggests that biochar from TCW pyrolysis may be appropriated to wastewaters treatment, with high contents of heavy metals and it can be an effective alternative to activated carbon.

Download Full-text

MECHANIZATION OF POTATO GRADING ON SMALL-SCALE FARMS: A CASE STUDY FROM PERU

Experimental Agriculture ◽

10.1017/s0014479704002340 ◽

2005 ◽

Vol 41 (1) ◽

pp. 81-92 ◽

Cited By ~ 1

Author(s):

G. P. BUTLER ◽

T. BERNET ◽

K. MANRIQUE

Keyword(s):

Developing Countries ◽

Market Integration ◽

Low Cost ◽

Farming System ◽

Agricultural Products ◽

Small Scale ◽

Critical Aspect ◽

Small Scale Farmers ◽

Important Cash Crop

Potatoes are an important cash crop for small-scale producers worldwide. The move away from subsistence to commercialized farming, combined with the rapid growth in demand for processed agricultural products in developing countries, implies that small-scale farmers and researchers alike must begin to respond to these market changes and consider post-harvest treatment as a critical aspect of the potato farming system. This paper presents and assesses a low cost potato-grading machine that was designed explicitly to enable small-scale potato growers to sort tubers by size for supply to commercial processors. The results of ten experiments reveal that the machine achieves an accuracy of sort similar to commercially available graders. The machine, which uses parallel conical rollers, has the capacity to grade different tuber shapes and to adjust sorting classes, making it suitable for locations with high potato diversity. Its relatively low cost suggests that an improved and adapted version of this machine might enhance market integration of small-scale potato producers not only in Peru, but in other developing countries as well.

Download Full-text

A Low Cost Knowledge Based System Framework for Design of Bending Die

Key Engineering Materials ◽

10.4028/www.scientific.net/kem.549.284 ◽

2013 ◽

Vol 549 ◽

pp. 284-291 ◽

Cited By ~ 2

Author(s):

Deepak Panghal ◽

Shailendra Kumar

Keyword(s):

Sheet Metal ◽

Low Cost ◽

Visual Basic ◽

Die Design ◽

Small Scale ◽

Production Rules ◽

System Framework ◽

Knowledge Based System ◽

Sheet Metal Parts ◽

Knowledge Based

This paper presents a low cost knowledge based system (KBS) framework for design of bending die. Considerations for development of KBS are discussed at some length. The proposed framework divides the task of development of expert system into different modules for major activities of bending die design. The procedure of development of KBS modules is also described at length. Production rules for each module are recommended to be coded in the AutoLISP language and designed to be loaded into the prompt area of AutoCAD or through user interface created using Visual Basic. Each module of the proposed framework is user interactive. Development of one module of the proposed framework is also described at length. This module is capable to assess manufacturability of bending sheet metal parts. An illustrative example is also included to demonstrate the usefulness of this module. The proposed system framework is flexible enough to accommodate new acquired knowledge. As the proposed system is implementable on a PC having AutoCAD software, therefore its low cost of implementation makes it affordable even by small scale sheet metal industries.

Download Full-text

A Critical Review of the Biological Processes in the Chemical Absorption-biological Reduction Integrated System for NO Removal

Current Biochemical Engineering ◽

10.2174/2212711907666210215093307 ◽

2021 ◽

Vol 07 ◽

Author(s):

Wei Li

Keyword(s):

Catalytic Reduction ◽

Low Cost ◽

Reduction Process ◽

Integrated System ◽

Future Research ◽

Small Scale ◽

Biological Processes ◽

Chemical Absorption ◽

Biological Reduction ◽

Biological Reaction

: Exploring low-cost, green and safe technologies to provide an alternative to the conventional selective catalytic reduction process is key to the control of NOx emitted from small-scale boilers and other industrial processes. To meet the demand, the chemical absorption-biological reduction integrated system has been developing recently. chemical absorption-biological reduction integrated system applies Fe(II)EDTA for NO absorption and iron-reducing and denitrifying bacteria for absorbent regeneration. Many studies have focused on the enhancements of mass transfer and biological reaction, among which the biological processes were the rate-limiting steps. This review summarizes the current researches on the biological processes in the CABR system, which focuses on the mechanism and enhancement of biochemical reactions, and provides the possible directions of future research.

Download Full-text

Social media: a blessing or a curse? Voice of owners in the beauty and wellness industry

The TQM Journal ◽

10.1108/tqm-03-2021-0074 ◽

2021 ◽

Vol ahead-of-print (ahead-of-print) ◽

Author(s):

Kulvinder Kaur ◽

Pawan Kumar

Keyword(s):

Social Media ◽

Low Cost ◽

Growth Potential ◽

Social Media Marketing ◽

Small Scale ◽

Content Type ◽

Social Media Platforms ◽

Pros And Cons ◽

Marketing Tool ◽

Use Of Internet

PurposeThe rise in the use of Internet technologies and social media has shifted the marketing practices from offline to online. This study aims to determine the pros and cons of social media marketing in the beauty and wellness industry.Design/methodology/approachIn-depth interviews were conducted with the owners and marketing executives of beauty and wellness centers to understand the use of popular social media platforms in this industry and their pros and cons.FindingsThe researchers identified eight merits and seven demerits of social media in the beauty and wellness industry. Every respondent is happy and satisfied with social media use, particularly Instagram and Facebook. Irrespective of the demerits, they have shown the intention to increase its usage in the future. The merits override demerits; thus, social media is a blessing for this industry from the owners' perspective.Research limitations/implicationsThe research is exploratory and is confined to just one industry. Research implication is that the visual nature of social media makes it a powerful tool for the promotion of the beauty and wellness industry.Practical implicationsThe study's findings will be beneficial for small-scale businesses as it will push them to take advantage of this low-cost marketing tool.Social implicationsSocial media marketing is helpful for communication and marketing purposes for society.Originality/valueThe beauty and wellness industry remained unfocused by researchers because it is highly unorganized, fragmented and not regulated, yet has huge growth potential. This research will provide a closer look at this industry as well as social media marketing.

Download Full-text