Characterization and Drug Release Control Ability of Chitosan/Lovastatin Particles Coated by Alginate

2020 ◽  
Vol 20 (12) ◽  
pp. 7347-7355
Author(s):  
Dam Xuan Thang ◽  
Nguyen Thuy Chinh ◽  
Bach Long Giang ◽  
Hoang Tran Dung ◽  
C. I. Sathish ◽  
...  
Keyword(s):  
Drug Release ◽  
Liquid Solution ◽  
Gastric Fluid ◽  
Simulated Gastric Fluid ◽  
Drug Release Profile ◽  
Scanning Calorimetry ◽  
Simulated Intestinal Fluid ◽  
Coated Particles ◽  
Structure Morphology ◽  
3D Printing Technique

We report on the coating of chitosan/lovastatin particles with a liquid solution of alginate using a 3D printing technique. The prepared particles are characterized by Scanning Electronic Microscopy, Infrared Spectroscopy, Dynamic Light Scattering, Differential Scanning Calorimetry, and Ultraviolet-Visible Spectroscopy. Characterization results reveal that the coating of alginate makes a considerable difference in the structure, morphology, size distribution and zeta potential of the chitosan/lovastatin particles, and the size of the coated particles is increased after the coating. We also demonstrate the drug release ability of the chitosan/lovastatin particles in simulated gastric fluid and controlled in simulated intestinal fluid. Drug release study reveals that the drug release profile of the coated particles varies significantly with the pH of the solution and the coating process significantly reduces the rate of release of the drug. We also report that the bioavailability of lovastatin particles can be improved by coating with the biopolymer layers.

scholarly journals THE USE OF CLINOPTILOLITES AS CARRIER OF METFORMIN HYDROCHLORIDE IN DRUG DELIVERY SYSTEM: IN VITRO DRUG RELEASE STUDY

2018 ◽  
Vol 11 (11) ◽  
pp. 285
Author(s):  
Putra Imwa ◽  
Kusumawati Igaw
Keyword(s):  
Drug Release ◽  
Gastric Fluid ◽  
Simulated Gastric Fluid ◽  
Metformin Hydrochloride ◽  
Simulated Intestinal Fluid ◽  
In Vitro Drug Release ◽  
Encapsulation Process ◽  
N2 Sorption ◽  
Metformin Hcl

Objective: As an antidiabetic drug, metformin hydrochloride (HCl) has been well known to possess low oral bioavailability and short half-life. In this study, we prepared the drug delivery system (DDS) of metformin HCl and clinoptilolite as its carrier. The in vitro drug release profile was further investigated.Methods: DDS was made by encapsulating metformin HCl on clinoptilolite using the wet impregnation method at various pH and initial concentration of metformin HCl. Fourier transform infrared spectrometer (FTIR), X-ray diffractometer (XRD), and N2 Sorption Analyzer were used to characterize the as-synthesized DDS. Drug release study was conducted by stirring the DDS in simulated gastric fluid and simulated intestinal fluid over 12 h.Results: The encapsulation process was achieved optimally at pH 7.0 and initial concentration of metformin HCl of 300 mg/l (CLI2-300 denoted DDS). The results of FTIR and N2 sorption analyzer confirmed the existence of metformin HCl on clinoptilolites. Meanwhile, the XRD result showed that the crystallinity of clinoptilolites remained unchanged after the encapsulation process. The cumulative drug release in the simulated gastric fluid was found to be higher than that in the simulated intestinal fluid, which indicated the potent influence of pH on the release properties of the drugs. The drug release kinetics of metformin HCl from clinoptilolite was best fitted into the Korsmeyer-Peppas model with non-Fickian transport mechanism.Conclusion: We found that clinoptilolite was suitable for DDS application, particularly as a carrier of metformin HCl.

scholarly journals DEVELOPMENT OF LIQUISOLID FORMULATION FOR IMPROVED SUSTAINED RELEASE OF PROPRANOLOL HYDROCHLORIDE

2021 ◽  
pp. 210-216
Author(s):  
ALIYAH ALIYAH ◽  
EMILIA UTOMO ◽  
ANDI DIAN PERMANA ◽  
ERNAWATI
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Propylene Glycol ◽  
Gastric Fluid ◽  
Angle Of Repose ◽  
Simulated Gastric Fluid ◽  
Polysorbate 80 ◽  
Propranolol Hydrochloride ◽  
Coating Materials ◽  
Simulated Intestinal Fluid

Objective: The aim of this study was to develop a liquisolid formulation of propranolol hydrochloride to obtain an improved sustained release profile by varying the ratio of liquid vehicles. Methods: In this study, propranolol hydrochloride (PPH) was dispersed in the combination of propylene glycol and polysorbate 80, as the liquid vehicles, with different ratios. Eudragit® RL and Aerosil® were used as carrier and coating materials, respectively, to produce a dry and free-flowing powder. In addition, HPMC was used to amplify the retardation effect. The prepared formulations were evaluated for its physicochemical properties, including loss on drying, flow rate, angle of repose calculation, drug content analysis, FT-IR spectroscopy, as well as dissolution studies. The obtained dissolution profiles were subsequently fitted to the mathematical model in order to determine the drug kinetics. Results: The results show that all formulations performed dry and free-flowing granules containing PPH in the range of 7-9%. Furthermore, all the prepared formulations were able to sustain the drug release for a total of 8 h in two different dissolution media, namely simulated gastric fluid and simulated intestinal fluid. F4 containing propylene glycol and polysorbate 80 (1:2) possessed the lowest drug release rate. It was also obtained that F1 and F3 followed first-order kinetics while F2, F4, and F5 complied with the Higuchi model. Conclusion: Overall, there was no difference in all the dissolution profiles based on the calculation of the difference and similarities factor.

scholarly journals Zein Beta-Cyclodextrin Micropowders for Iron Bisglycinate Delivery

Pharmaceutics ◽  
2020 ◽  
Vol 12 (1) ◽  
pp. 60 ◽  
Author(s):  
Diletta Esposito ◽  
Giovanni Dal Poggetto ◽  
Aurélie Demont ◽  
Nicolai Kraut ◽  
Agnese Miro ◽  
...  
Keyword(s):  
Oral Delivery ◽  
Raw Materials ◽  
Gastric Fluid ◽  
Simulated Gastric Fluid ◽  
Scanning Calorimetry ◽  
Simulated Intestinal Fluid ◽  
Food Ingredients ◽  
Rational Combination ◽  
Novel Strategy ◽  
Micro Technology

Given the limited number of materials available to design delivery platforms for nutrients, the rational combination of raw materials already approved as food ingredients and their processing through nano-micro technology can offer a unique tool for innovation. Here, we propose a nano-in-micro strategy to produce powders based on the hydrophobic protein zein, useful for the oral delivery of a hydrophilic iron source (iron bisglycinate) in anaemic patients. Iron-loaded powders were prepared through a two-step strategy consisting in the formation of a zein pseudolatex followed by a spray-drying step. To extend the manipulation space for zein and entrap iron bisglycinate, β-cyclodextrin (βCD) was selected as helping excipient. Addition of βCD allowed iron loading in the pseudolatex and greatly increased product yields after the drying process as compared to zein alone. Iron-loaded micro-sized powders were characterised by attenuated total reflectance–Fourier transform infrared (ATR-FTIR) spectra, thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC) to elucidate the role of βCD as a compatibilizer for the zein–iron system. Remarkably, micropowders released only 20% of FeBIS in a simulated gastric fluid, whereas release in a simulated intestinal fluid was almost completed in 7 h. In summary, βCD association to zein is a novel strategy to expand applications in the oral delivery of iron bisglycinate and, prospectively, to micronutrient chelates.

scholarly journals Formulation and development of Serratiopeptidase enteric coated tablets and analytical method validation by UV Spectroscopy

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Vijay Kumar Panthi ◽  
Saurav Kumar Jha ◽  
Raghvendra Chaubey ◽  
Rudra Pangeni
Keyword(s):  
Drug Release ◽  
Analytical Method ◽  
Uv Spectroscopy ◽  
Gastric Fluid ◽  
Simulated Gastric Fluid ◽  
Simulated Intestinal Fluid ◽  
Analytical Method Validation ◽  
Analytical Technique ◽  
Enteric Coated

Serratiopeptidase (SRP) is a proteolytic enzyme that emerged as one of the most potent anti-inflammatory and analgesic drugs. The purpose of the present study was to formulate and evaluate enteric-coated tablets for SRP and investigate their stability using a simple and validated analytical method by ultraviolet (UV) spectroscopy. The colloidal silicon dioxide (2.50%), sodium starch glycolate (3.44%), and crospovidone (2.50%) were used as appropriate excipients for the development of core part of tablets. To protect the prepared tablets from acidic environment in the stomach, white shellac, castor oil, HPMC phthalate 40, and ethyl cellulose were used. The seal coating and enteric coating attained were 2.75% and 6.74%, respectively. SRP was found to be linear at 265 nm in the concentration range of 25–150 µg/mL. The results revealed that our developed method was linear (R2 = 0.999), precise (RSD % = 0.133), and accurate (% recovery = 99.96–103.34). The formulated SRP tablets were found to be stable under accelerated conditions as well as under room temperature for 6 months (assay %: >97.5%). The in vitro drug release study demonstrated that enteric-coated tablets were able to restrict SRP release in both acidic environments: 0.1 N HCl and simulated gastric fluid (pH 1.2). Moreover, at 60 minutes, the formulated SRP tablets revealed 13.0% and 8.98% higher drug release in phosphate buffer (pH 6.8) and simulated intestinal fluid (pH 6.8), respectively, compared to the marketed tablet formulation. This study concludes that enteric-coated tablets of SRP with higher drug release in the intestine can be prepared and examined for their stability using validated analytical technique of UV spectroscopy.

scholarly journals Fabrication of Multi-Layered Microspheres Based on Phase Separation for Drug Delivery

Micromachines ◽  
2021 ◽  
Vol 12 (6) ◽  
pp. 723
Author(s):  
He Xia ◽  
Ang Li ◽  
Jia Man ◽  
Jianyong Li ◽  
Jianfeng Li
Keyword(s):  
Aqueous Solution ◽  
Phase Separation ◽  
Gastric Fluid ◽  
Simulated Gastric Fluid ◽  
Sustained Drug Release ◽  
Simulated Intestinal Fluid ◽  
Glycol Diacrylate ◽  
Emulsion Droplets ◽  
Collection Tube ◽  
Poly Ethylene

In this work, we used a co-flow microfluidic device with an injection and a collection tube to generate droplets with different layers due to phase separation. The phase separation system consisted of poly(ethylene glycol) diacrylate 700 (PEGDA 700), PEGDA 250, and sodium alginate aqueous solution. When the mixture droplets formed in the outer phase, PEGDA 700 in the droplets would transfer into the outer aqueous solution, while PEGDA 250 still stayed in the initial droplet, breaking the miscibility equilibrium of the mixture and triggering the phase separation. As the phase separation proceeded, new cores emerged in the droplets, gradually forming the second and third layers. Emulsion droplets with different layers were polymerized under ultraviolet (UV) irradiation at different stages of phase separation to obtain microspheres. Microspheres with different layers showed various release behaviors in simulated gastric fluid (SGF) and simulated intestinal fluid (SIF). The release rate decreased with the increase in the number of layers, which showed a potential application in sustained drug release.

Preparation and Characterization of Cefradine/Montmorillionite Composites

2012 ◽  
Vol 560-561 ◽  
pp. 434-437 ◽  
Author(s):  
Lan Wang ◽  
Wen Ji Guo ◽  
Yan Zhao Zhao
Keyword(s):  
Gastric Fluid ◽  
Simulated Gastric Fluid ◽  
X Ray Diffraction ◽  
Simulated Intestinal Fluid ◽  
Solution Intercalation ◽  
Method Of Solution ◽  
Ft Ir ◽  
In The Beginning ◽  
Ft Ir Spectroscopy

The objective of this paper was to prepare the composite of crefradine/montmorillionite in the method of solution intercalation. The drug load and intercalation rate varied with the drug concentration. X-ray diffraction (XRD), Fourier transformed infrared (FT-IR) Spectroscopy, and thermal analysis (TG-DSC) were applied to characterize composite mentioned above. Together with drug release tests, results indicate cefradine intercalated into montmorillionite.The release profiles of cefradine/MMT in simulated gastric fluid (pH 1.2) and simulated intestinal fluid (pH 7.4) at 37°Cduring 10h are shown in Fig. 4. The amount of cefradine in the beginning 2h came up to 35% and 50%, and in the following time, cefradine released slowly. The release behaviors met the requirements of sustained release.

Fusion as an Approach to Enhance Dissolution Rate of a Poorly Water-Soluble Drug (Curcurmin)

2011 ◽  
Vol 393-395 ◽  
pp. 119-122
Author(s):  
Dong Hua Wan ◽  
Fen Lin ◽  
Qu Xiang Liao
Keyword(s):  
Dissolution Rate ◽  
Drug Loading ◽  
Solid Dispersions ◽  
Gastric Fluid ◽  
Molecular State ◽  
Water Soluble ◽  
Drug Dissolution ◽  
Simulated Gastric Fluid ◽  
Scanning Calorimetry ◽  
Rate Improvement

It’s well known that curcumin is practically insoluble in water. Therefore, to improve the drug dissolution rate, fusion approach was employed to prepare curcumin solid dispersions (SDs) in the carrier Pluronic F68 with three different drug loads. The dissolution rate of curcumin from the SDs was measured at simulated gastric fluid. The concentration of the dissolved drug in the medium was determined by HPLC. The dissolution rates of the formulations were dependent on the drug loading in SDs. 92.2% CUR was dissolved in 10 min from the SDs with 8.97% drug load, whereas the amounts of drug released were 65.8% and 84.2% within 120 min from the SDs with 18.9% and 29.0% drug loads, respectively. The Fourier transform infrared spectra indicated hydrogen bond between the drug and carrier. Furthermore, their physicochemical properties were well investigated using differential scanning calorimetry and X-ray diffraction. In the dispersions containing 8.97% CUR, the drug was in the molecular state. At a composition of approximately 18.9%, CUR was dispersed as micro-fine crystals. These interesting results indicate that the physical states of the drug in the carrier, which are governed by the drug loading, can affect the dissolution rate improvement.

scholarly journals Release Activity of Encapsulated Lactobacillus plantarum NBRC 3070 in Optimum Alginate - Aloe vera Matrices during Simulated Gastric Fluid (SGF) and Simulated Intestinal Fluid (SIF) Exposure

2017 ◽  
Vol 5 (2) ◽  
Author(s):  
Nur Syahirah Sallehudin ◽  
Khalilah Abdul Khalil ◽  
Maslinda Musa ◽  
Hifa Nazirah Mohd Yazid ◽  
Anida Yusof
Keyword(s):  
Aloe Vera ◽  
Clinical Results ◽  
Gastric Fluid ◽  
Alginate Beads ◽  
Simulated Gastric Fluid ◽  
Intestinal Fluid ◽  
Simulated Intestinal Fluid ◽  
Encapsulated Cells ◽  
Aloe Vera Gel ◽  
Encapsulation Process

Probiotic encapsulation approach has the potential to protect microorganisms and to deliver them into the gut. Because of the promising preclinical and clinical results, probiotics have been incorporated into a range of products. However, there are still many challenges to overcome with respect to the encapsulation process and the conditions prevailing in the gut. Thus in this study, the release activity of encapsulated L. plantarum NBRC 3070 and Aloe vera gel within alginate coated chitosan matrices during simulated gastric fluid (SGF) and simulated intestinal fluid (SIF) exposure were investigated. There were four groups of beads prepared in this study: 1) Encapsulated probiotic and Aloe vera within alginate beads (chitosan coated), 2) Encapsulated probiotic within alginate beads (chitosan coated), 3) Encapsulated probiotic and Aloe vera within alginate beads (uncoated) and 4) Encapsulated probiotic alone within alginate beads (uncoated). Encapsulation process was carried out using extrusion method. The optimized composition of alginate matrix (1.34% w/v) and Aloe vera gel (1.99% w/v) were used.  In order to investigate their release activity, all beads were exposed in Simulated Gastric (SGF) at pH 2.5 and Simulated Intestinal Fluids (SIF) at pH 6.5 for 120 min and 270 min, respectively. Based on the findings, alginate-Aloe vera beads with chitosan coated was able to protect L. plantarum NBRC 3070 during SGF exposure with only 1 log10 cfu/mL reduction. The presence of Aloe vera gel in the beads improved the survivability of the cells. Encapsulated cells were observed successfully slow released of cells from the beads after exposure in SIF. Scan Electron Microscope (SEM) result had shown that cross link activity of the optimum alginate-Aloe vera with chitosan coating resulted in better survival of cells after simulated gastro and able to deliver sufficient probiotic dose to intestinal region. The combinations were able to improve encapsulated cells survivability during low acidic environment passage and release activity into the intestinal target region.   

scholarly journals Survival Survey of Lactobacillus acidophilus In Additional Probiotic Bread

2019 ◽  
Vol 7 (4) ◽  
pp. 588
Author(s):  
Truong Duc Thang ◽  
Le Thi Hanh Quyen ◽  
Hoang Thi Thuy Hang ◽  
Nguyen Thien Luan ◽  
Dang Thi KimThuy ◽  
...  
Keyword(s):  
Lactobacillus Acidophilus ◽  
Xanthan Gum ◽  
Gastric Fluid ◽  
Probiotic Bacteria ◽  
Simulated Gastric Fluid ◽  
Protective Agent ◽  
Intestinal Fluid ◽  
Simulated Intestinal Fluid ◽  
The World ◽  
Alginate Matrix

Bread is a popular food in the world because of its variety and convenience. Currently, studies on the adding probiotics to bread are limited due to the adverse effects of processing, such as baking temperature, aerobic environment to the probiotic bacteria. The objective of this study was to produce probiotic cream bread, in which Lactobacillus acidophilus was microencapsulated with Alginate 2% (A); Alginate 2% + maltodextrin 1% (AM); Alginate 2% + xanthan gum 0.1% (AX); and Alginate 2% + maltodextrin 1% + xanthan gum 0.1% (AMX). Microcapsules were added to the kernel, conducting encapsulation yield investigations, survival in baking, preservation of bread, and in simulated gastric fluid and simulated intestinal fluid conditions after 8 days of storage. The results showed that the addition of xanthan gum enhanced the encapsulation yield, it reached 92.9% and 92.37% in AMX and AX samples, respectively. The viability of L. acidophilus during baking was decreased by 3.64 and 3.75 Log (CFU/bread) in AMX and AM samples, compared to A and AX which were decreased by 4.75 and 4.44 Log (CFU/ bread). In SGF (Simulated Gastric Fluid) and SIF (Simulated Intestinal Fluid) conditions, the AMX microcapsules provide the best probiotic protection among the four tested carriers. The combination of xanthan gum and maltodextrin in alginate matrix, eventually leading to having dual efficiency: First, xanthan gum would act as buffers that reduce acid activity; Second, maltodextrin acting as a protective agent of L. acidophilus against high temperature as well as potential prebiotic that improve the viability of probiotic.

scholarly journals IN VITRO RELEASE STUDIES OF CARBAMAZEPINE TABLETS AND BENZOYL METRONIDAZOLE SUSPENSIONS USING THE FLOW-THROUGH CELL APPARATUS AND SIMULATED GASTROINTESTINAL FLUIDS

2017 ◽  
Vol 9 (4) ◽  
pp. 54 ◽  
Author(s):  
Jose Raul Medina ◽  
Jonathan Hernandez ◽  
Marcela Hurtado
Keyword(s):  
In Vitro Release ◽  
Gastric Fluid ◽  
Simulated Gastric Fluid ◽  
Dissolution Time ◽  
Intestinal Fluid ◽  
Simulated Intestinal Fluid ◽  
Release Studies ◽  
Flow Through ◽  
Vitro Release

Objective: To characterize the in vitro release of carbamazepine tablets and benzoyl metronidazole suspensions using the flow-through cell apparatus and simulated gastrointestinal fluids.Methods: Tegretol® tablets, Flagyl® suspension, and generic formulations of each were tested. Release studies were performed using an automated flow-through cell apparatus. Simulated gastric fluid (with and without pepsin) and simulated intestinal fluid (without pancreatin) at 16 ml/min and fasted state simulated intestinal fluid at 8 ml/min, all at 37.0±0.5 °C, were used as dissolution media. The quantity of dissolved carbamazepine and benzoyl metronidazole was determined at 5-min intervals until 60 min at 285 and 278 nm, respectively. Percentage dissolved at 60 min, mean dissolution time, dissolution efficiency values, and t10%, t25%, t50% and t63.2% were calculated. Mean values for all parameters were compared between the reference and generic formulations using Studentʼs t-test. Dissolution data were fitted to different kinetic models.Results: Simulated gastric fluid without pepsin showed no discriminative capability for carbamazepine tablets. Significant differences were observed between the reference and generic formulations for almost all parameters (*P<0.05). In some cases, the logistic model best described the in vitro release of both drugs.Conclusion: Using an apparatus and media that best simulates the gastrointestinal environment, we identified differences in the rate and extent of dissolution of both drugs that could help to optimise the design of interchangeable formulations. Based on the physicochemical characteristics of carbamazepine and benzoyl metronidazole and the conditions in which the formulations were tested, these differences could be of clinical relevance. 

Sign in / Sign up

Export Citation Format

Share Document