scholarly journals Variation in grain-size characteristics of simulated shrubs as a novel sand-barrier in a wind tunnel experiment

2021 ◽  
Vol 104 (2) ◽  
pp. 003685042110093
Author(s):  
Zhenyi Wang ◽  
Xia Pan ◽  
Limin Yuan ◽  
Yong Gao ◽  
Xiaohong Dang ◽  
...  
Keyword(s):  
Grain Size ◽  
Wind Tunnel ◽  
Semiarid Regions ◽  
Wind Speeds ◽  
Average Grain Size ◽  
Spatial Configurations ◽  
Grain Size Parameters ◽  
Soil Grain Size ◽  
Arid And Semiarid ◽  
Sand Deposition

Sand transport is the main manifestation of sand damage in the arid and semiarid regions globally. It is a huge challenge to stabilize mobile sandy and change them into stable productive ecosystems. The establishment of simulated shrubs is one of the most effective measures to solve the above difficulties as a novel sand-barrier. To clarify simulated shrubs’ role in the process of ecological restoration. It will be greatly helpful to incorporate the shelter device proposed in the present work into landscape models for aeolian soil transport, to optimize the parameters associated with the sand-barrier characteristics for aeolian soil stabilization at the field scale. A series of wind tunnel experiments were conducted to analyze the variations of soil grain-size of simulated shrubs with different spatial configurations, row spaces, and net wind speeds. Further, the soil grain-size parameters were calculated by the classic method proposed by Folk and Ward to clarify the change of soil particles resulted from the blocking effects. The average grain-size content of simulated shrubs with different spatial configurations, row spaces, and net wind speeds was dominated by medium sand and fine sand, and the total percentage was more than 90%. Moreover, the sand deposition of simulated shrubs with different spatial configurations increased with the improvement of wind speeds. The average sand deposition of spindle-shaped simulated shrubs in 17.5 × 17.5 cm and broom-shaped simulated shrubs in 17.5 × 26.25 cm under different net wind speeds was the least. The effects of row spaces on average grain-size parameters increased with the improvement of net wind speeds. By calculating the correct characteristics of specific shelter devices proposed in the present work, all of these findings suggest that the application of simulated shrubs will be an important component to further extend ecological engineering projects in arid and semiarid regions.

Variation in Grain-size Characteristics of Stimulated Shrubs As a Novel Sand-barrier in a Wind Tunnel Experiment

2021 ◽  
Author(s):  
Xia Pan ◽  
Zhenyi Wang ◽  
Yong Gao ◽  
Zhongjv Meng ◽  
Xiaohong Dang ◽  
...  
Keyword(s):  
Grain Size ◽  
Wind Speed ◽  
Wind Tunnel ◽  
Wind Speeds ◽  
Average Grain Size ◽  
Spatial Configurations ◽  
Desert Regions ◽  
Grain Size Parameters ◽  
Soil Grain Size ◽  
Arid And Semiarid

<p>Sand transport is the main manifestation of sand damage in the arid and semiarid desert regions globally. It is still a challenge for ecologists to stabilize mobile sandy and to change them into stable productive ecosystems. The establishment of stimulated shrubs is one of the most effective measures as a novel sand-barrier. Meanwhile, it has a beautiful visual effect in deserts. To better understand its role in the process of ecological restoration, we conducted a wind tunnel experiment to analyze the overall characteristics of soil grain-size variation of different spatial configurations with simulated shrubs in row spaces under different net wind speeds. The results present that the average grain-size content was dominated by medium sand and fine sand, and the total percentage was more than 90%. The average grain-size content for other soil grain-size was almost the same and the proportion was less than 10%. Moreover, the sand deposition of simulated shrubs with different spatial configurations increased with the improvement of wind speed. And the average sand deposition of spindle-shaped simulated shrubs in 17.5×17.5cm and broom-shaped simulated shrubs in 17.5×26.25cm under different wind speeds was the least. There was less variation of the soil grain-size parameters among different spatial configurations of stimulated shrubs, row spaces, and net wind speeds. The effects of row spaces on average grain-size parameters would be improved with the increase of wind speed. By calculating the “correct” characteristics of any specific shelter device, all of these findings suggest that the application of the simulated shrubs will be an important component to further extend ecological engineering projects in arid and semiarid desert regions.</p>

Average grain-size parameters of unlithified sediments in the World Ocean

Oceanology ◽  
2006 ◽  
Vol 46 (4) ◽  
pp. 545-556 ◽  
Author(s):  
V. N. Sval’nov ◽  
T. N. Alekseeva
Keyword(s):  
Grain Size ◽  
World Ocean ◽  
Average Grain Size ◽  
The World ◽  
Grain Size Parameters

Surface Modification and its Influence on the Microstructure and Creep Resistance of Nickel Based Superalloy René 77 / Modyfikacja Powierzchniowa Oraz Jej Wpływ Na Mikrostrukture I Wytrzymałosc Na Pełzanie Odlewów Z Nadstopu Niklu Ren´E 77

2013 ◽  
Vol 58 (1) ◽  
pp. 95-98 ◽  
Author(s):  
M. Zielinska ◽  
J. Sieniawski
Keyword(s):  
Mechanical Properties ◽  
Grain Size ◽  
Surface Modification ◽  
Turbine Blades ◽  
Processing Parameters ◽  
Grain Structure ◽  
Creep Tests ◽  
Cobalt Aluminate ◽  
Nickel Based Superalloy ◽  
Average Grain Size

Superalloy René 77 is very wide used for turbine blades, turbine disks of aircraft engines which work up to 1050°C. These elements are generally produced by the investment casting method. Turbine blades produced by conventional precision casting methods have coarse and inhomogeneous grain structure. Such a material often does not fulfil basic requirements, which concern mechanical properties for the stuff used in aeronautical engineering. The incorporation of controlled grain size improved mechanical properties. This control of grain size in the casting operation was accomplished by the control of processing parameters such as casting temperature, mould preheating temperature, and the use of grain nucleates in the face of the mould. For nickel and cobalt based superalloys, it was found that cobalt aluminate (CoAl2O4) has the best nucleating effect. The objective of this work was to determine the influence of the inoculant’s content (cobalt aluminate) in the surface layer of the ceramic mould on the microstructure and mechanical properties at high temperature of nickel based superalloy René 77. For this purpose, the ceramic moulds were made with different concentration of cobalt aluminate in the primary slurry was from 0 to 10% mass. in zirconium flour. Stepped and cylindrical samples were casted for microstructure and mechanical examinations. The average grain size of the matrix ( phase), was determined on the stepped samples. The influence of surface modification on the grain size of up to section thickness was considered. The microstructure investigations with the use of light microscopy and scanning electron microscopy (SEM) enable to examine the influence of the surface modification on the morphology of ’ phase and carbides precipitations. Verification of the influence of CoAl2O4 on the mechanical properties of castings were investigated on the basis of results obtained form creep tests.

scholarly journals ODS EUROFER Steel Strengthened by Y-(Ce, Hf, La, Sc, and Zr) Complex Oxides

Metals ◽  
2019 ◽  
Vol 9 (11) ◽  
pp. 1148 ◽  
Author(s):  
Roman Husák ◽  
Hynek Hadraba ◽  
Zdeněk Chlup ◽  
Milan Heczko ◽  
Tomáš Kruml ◽  
...  
Keyword(s):  
Grain Size ◽  
Yield Strength ◽  
Complex Oxides ◽  
Oxide Dispersion Strengthened ◽  
Interparticle Spacing ◽  
Oxide Dispersion ◽  
Strengthening Effect ◽  
Dispersion Strengthening ◽  
Doping Element ◽  
Average Grain Size

Oxide dispersion-strengthened (ODS) materials contain homogeneous dispersions of temperature-stable nano-oxides serving as obstacles for dislocations and further pinning of grain boundaries. The strategy for dispersion strengthening based on complex oxides (Y-Hf, -Zr, -Ce, -La) was developed in order to refine oxide dispersion to enhance the dispersion strengthening effect. In this work, the strengthening of EUROFER steel by complex oxides based on Y and elements of the IIIB group (lanthanum, scandium) and IVB group (cerium, hafnium, zirconium) was explored. Interparticle spacing as a dispersoid characteristic appeared to be an important factor in controlling the dispersion strengthening contribution to the yield strength of ODS EUROFER steels. The dispersoid size and average grain size of ODS EUROFER steel were altered in the ranges of 5–13 nm and 0.6–1.7 µm, respectively. Using this strategy, the yield strength of the prepared alloys varied between 550 MPa and 950 MPa depending on the doping element.

scholarly journals Development of Al–Mg–Si alloy performance by addition of grain refiner Al–5Ti–1B alloy

2021 ◽  
Vol 104 (2) ◽  
pp. 003685042110294
Author(s):  
Khaled Abd El-Aziz ◽  
Emad M Ahmed ◽  
Abdulaziz H Alghtani ◽  
Bassem F Felemban ◽  
Hafiz T Ali ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Grain Size ◽  
Corrosion Resistance ◽  
Testing Machine ◽  
Dendritic Structure ◽  
Grain Refiner ◽  
Corrosion Properties ◽  
Average Grain Size ◽  
Structural Applications ◽  
Alloy Addition

Aluminum alloys are the most essential part of all shaped castings manufactured, mainly in the automotive, food industry, and structural applications. There is little consensus as to the precise relationship between grain size after grain refinement and corrosion resistance; conflicting conclusions have been published showing that reduced grain size can decrease or increase corrosion resistance. The effect of Al–5Ti–1B grain refiner (GR alloy) with different percentages on the mechanical properties and corrosion behavior of Aluminum-magnesium-silicon alloy (Al–Mg–Si) was studied. The average grain size is determined according to the E112ASTM standard. The compressive test specimens were made as per ASTM: E8/E8M-16 standard to get their compressive properties. The bulk hardness using Vickers hardness testing machine at a load of 50 g. Electrochemical corrosion tests were carried out in 3.5 % NaCl solution using Autolab Potentiostat/Galvanostat (PGSTAT 30).The grain size of the Al–Mg–Si alloy was reduced from 82 to 46 µm by the addition of GR alloy. The morphology of α-Al dendrites changes from coarse dendritic structure to fine equiaxed grains due to the addition of GR alloy and segregation of Ti, which controls the growth of primary α-Al. In addition, the mechanical properties of the Al–Mg–Si alloy were improved by GR alloy addition. GR alloy addition to Al–Mg–Si alloy produced fine-grained structure and better hardness and compressive strength. The addition of GR alloy did not reveal any marked improvements in the corrosion properties of Al–Mg–Si alloy.

scholarly journals Experimental Study on the Thickness-Dependent Hardness of SiO2 Thin Films Using Nanoindentation

Coatings ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 23
Author(s):  
Weiguang Zhang ◽  
Jijun Li ◽  
Yongming Xing ◽  
Xiaomeng Nie ◽  
Fengchao Lang ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Grain Size ◽  
Integrated Circuits ◽  
Film Thickness ◽  
Depth Range ◽  
Micro Electro Mechanical Systems ◽  
Si Substrates ◽  
Sio2 Thin Film ◽  
Average Grain Size

SiO2 thin films are widely used in micro-electro-mechanical systems, integrated circuits and optical thin film devices. Tremendous efforts have been devoted to studying the preparation technology and optical properties of SiO2 thin films, but little attention has been paid to their mechanical properties. Herein, the surface morphology of the 500-nm-thick, 1000-nm-thick and 2000-nm-thick SiO2 thin films on the Si substrates was observed by atomic force microscopy. The hardnesses of the three SiO2 thin films with different thicknesses were investigated by nanoindentation technique, and the dependence of the hardness of the SiO2 thin film with its thickness was analyzed. The results showed that the average grain size of SiO2 thin film increased with increasing film thickness. For the three SiO2 thin films with different thicknesses, the same relative penetration depth range of ~0.4–0.5 existed, above which the intrinsic hardness without substrate influence can be determined. The average intrinsic hardness of the SiO2 thin film decreased with the increasing film thickness and average grain size, which showed the similar trend with the Hall-Petch type relationship.

scholarly journals Structural Transformations and Mechanical Properties of Metastable Austenitic Steel under High Temperature Thermomechanical Treatment

Metals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 645
Author(s):  
Igor Litovchenko ◽  
Sergey Akkuzin ◽  
Nadezhda Polekhina ◽  
Kseniya Almaeva ◽  
Evgeny Moskvichev
Keyword(s):  
Plastic Deformation ◽  
Grain Size ◽  
High Temperature ◽  
Austenitic Steel ◽  
Structural Transformations ◽  
Initial State ◽  
Twin Boundaries ◽  
Metastable Austenitic Steel ◽  
Average Grain Size ◽  
Heating Up

The effect of high-temperature thermomechanical treatment on the structural transformations and mechanical properties of metastable austenitic steel of the AISI 321 type is investigated. The features of the grain and defect microstructure of steel were studied by scanning electron microscopy with electron back-scatter diffraction (SEM EBSD) and transmission electron microscopy (TEM). It is shown that in the initial state after solution treatment the average grain size is 18 μm. A high (≈50%) fraction of twin boundaries (annealing twins) was found. In the course of hot (with heating up to 1100 °C) plastic deformation by rolling to moderate strain (e = 1.6, where e is true strain) the grain structure undergoes fragmentation, which gives rise to grain refining (the average grain size is 8 μm). Partial recovery and recrystallization also occur. The fraction of low-angle misorientation boundaries increases up to ≈46%, and that of twin boundaries decreases to ≈25%, compared to the initial state. The yield strength after this treatment reaches up to 477 MPa with elongation-to-failure of 26%. The combination of plastic deformation with heating up to 1100 °C (e = 0.8) and subsequent deformation with heating up to 600 °C (e = 0.7) reduces the average grain size to 1.4 μm and forms submicrocrystalline fragments. The fraction of low-angle misorientation boundaries is ≈60%, and that of twin boundaries is ≈3%. The structural states formed after this treatment provide an increase in the strength properties of steel (yield strength reaches up to 677 MPa) with ductility values of 12%. The mechanisms of plastic deformation and strengthening of metastable austenitic steel under the above high-temperature thermomechanical treatments are discussed.

Sign in / Sign up

Export Citation Format

Share Document