scholarly journals A review of the principles of turbidity measurement

2017 ◽  
Vol 41 (5) ◽  
pp. 620-642 ◽  
Author(s):  
Ben GB Kitchener ◽  
John Wainwright ◽  
Anthony J Parsons
Keyword(s):  
Suspended Sediment ◽  
Sediment Concentration ◽  
Data Sets ◽  
New Methods ◽  
Measuring Devices ◽  
Optical Attenuators ◽  
Measurement Units ◽  
Definition Of ◽  
Rich Data

Turbidity of water due to the presence of suspended sediment is measured and interpreted in a variety of ways, which can lead to the misinterpretation of data. This paper re-examines the physics of light scattering in water, and exposes the extent to which the reporting of turbidity data is inconsistent. It is proposed that the cause of this inconsistency is the fact that the accepted turbidity standards USEPA Method 180.1, ISO 7027 and GLI Method 2 are mutually inconsistent, as these standards give rise to a large number of measurement units that are not based on the optical properties of light absorption and scattering by suspensions in water, but by the arbitrary definition of the degree of turbidity being due to a concentration of formazin or other similar polymer-based calibration standard. It is then proposed that all turbidity-measuring devices should be calibrated with precise optical attenuators such as neutral density filters. Such calibration would allow for the definition of a beam attenuation coefficient for every turbidity-measuring instrument which would be cross-comparable with any other instrument calibrated in the same way. The units for turbidity measurements should be based on attenuation and reported as dB m−1. It is also proposed that a new standard should be drafted according to this attenuation-based method, and this new standard should also define the nomenclature for reporting data collected at any specific scattering angle in terms of an attenuation in dB m−1. The importance of multi-parameter turbidity measurements for the improvement of the quality of turbidity data and the application of parameter-rich data sets to new methods of sediment characterization are discussed. It is suggested that more research into multi-parameter turbidity measurements is needed, as these new methods will facilitate an increase in parity between turbidity and suspended sediment concentration, a relationship that is subjective.

scholarly journals Integration of Multiple Readouts into the Z' Factor for Assay Quality Assessment

2009 ◽  
Vol 15 (1) ◽  
pp. 95-101 ◽  
Author(s):  
Anne Kümmel ◽  
Hanspeter Gubler ◽  
Patricia Gehin ◽  
Martin Beibel ◽  
Daniela Gabriel ◽  
...  
Keyword(s):  
Quality Assessment ◽  
State Of The Art ◽  
Simulated Data ◽  
Data Sets ◽  
Real World Data ◽  
Suggested Approach ◽  
Biological Assays ◽  
Rich Data ◽  
Negative Controls

Methods that monitor the quality of a biological assay (i.e., its ability to discriminate between positive and negative controls) are essential for the development of robust assays. In screening, the most commonly used parameter for monitoring assay quality is the Z' factor, which is based on 1 selected readout. However, biological assays are able to monitor multiple readouts. For example, novel multiparametric screening technologies such as high-content screening provide information-rich data sets with multiple readouts on a compound’s effect. Still, assay quality is commonly assessed by the Z' factor based on a single selected readout. This report suggests an extension of the Z' factor, which integrates multiple readouts for assay quality assessment. Using linear projections, multiple readouts are condensed to a single parameter, based on which the assay quality is monitored. The authors illustrate and evaluate this approach using simulated data and real-world data from a high-content screen. The suggested approach is applicable during assay development, to optimize the image analysis, as well as during screening to monitor assay robustness. Furthermore, data sets from high-content imaging assays and other state-of-the-art multiparametric screening technologies, such as flow cytometry or transcript analysis, could be analyzed.

Immunoferritin localization of intracellular antigens in positively stained frozen sections

1978 ◽  
Vol 36 (2) ◽  
pp. 168-169
Author(s):  
K. T. Tokuyasu
Keyword(s):  
Surface Tension ◽  
Water Surface ◽  
Thin Layers ◽  
The Other ◽  
Positive Staining ◽  
Frozen Sections ◽  
The Past ◽  
Ultrathin Frozen Sections ◽  
Definition Of

During the past investigations of immunoferritin localization of intracellular antigens in ultrathin frozen sections, we found that the degree of negative staining required to delineate u1trastructural details was often too dense for the recognition of ferritin particles. The quality of positive staining of ultrathin frozen sections, on the other hand, has generally been far inferior to that attainable in conventional plastic embedded sections, particularly in the definition of membranes. As we discussed before, a main cause of this difficulty seemed to be the vulnerability of frozen sections to the damaging effects of air-water surface tension at the time of drying of the sections.Indeed, we found that the quality of positive staining is greatly improved when positively stained frozen sections are protected against the effects of surface tension by embedding them in thin layers of mechanically stable materials at the time of drying (unpublished).

Trust in the Police: Cross-country Comparisons

2012 ◽  
pp. 24-47
Author(s):  
V. Gimpelson ◽  
G. Monusova
Keyword(s):  
Public Opinion ◽  
Public Attitudes ◽  
Crime Rates ◽  
Authoritarian Regimes ◽  
Data Sets ◽  
The Public ◽  
Positive Attitudes ◽  
Cross Country ◽  
Police Activity

Using different cross-country data sets and simple econometric techniques we study public attitudes towards the police. More positive attitudes are more likely to emerge in the countries that have better functioning democratic institutions, less prone to corruption but enjoy more transparent and accountable police activity. This has a stronger impact on the public opinion (trust and attitudes) than objective crime rates or density of policemen. Citizens tend to trust more in those (policemen) with whom they share common values and can have some control over. The latter is a function of democracy. In authoritarian countries — “police states” — this tendency may not work directly. When we move from semi-authoritarian countries to openly authoritarian ones the trust in the police measured by surveys can also rise. As a result, the trust appears to be U-shaped along the quality of government axis. This phenomenon can be explained with two simple facts. First, publicly spread information concerning police activity in authoritarian countries is strongly controlled; second, the police itself is better controlled by authoritarian regimes which are afraid of dangerous (for them) erosion of this institution.

The Influence Of The Led Luminaires Electrical Parameters On Their Correlated Colour Temperature During Operation Mode

2020 ◽  
pp. 89-96
Author(s):  
Sergei S. Kapitonov ◽  
Alexei S. Vinokurov ◽  
Sergei V. Prytkov ◽  
Sergei Yu. Grigorovich ◽  
Anastasia V. Kapitonova ◽  
...  
Keyword(s):  
Operation Mode ◽  
Light Sources ◽  
Electrical Parameters ◽  
Colour Temperature ◽  
Radiation Spectra ◽  
Service Period ◽  
Close Proximity ◽  
Definition Of ◽  
Comprehensive Study

The article describes the results of comprehensive study aiming at increase of quality of LED luminaires and definition of the nature of changes in their correlated colour temperature (CCT) in the course of operation. Dependences of CCT of LED luminaires with remote and close location of phosphor for 10 thousand hours of operation in different electric modes were obtained; the results of comparison between the initial and final radiation spectra of the luminaires are presented; using mathematical statistics methods, variation of luminaire CCT over the service period claimed by the manufacturer is forecast; the least favourable electric operation modes with the highest CCT variation observed are defined. The obtained results have confirmed availability of the problem of variation of CCT of LED luminaires during their operation. Possible way of its resolution is application of more qualitative and therefore expensive LEDs with close proximity of phosphor or LEDs with remote phosphor. The article may be interesting both for manufacturers and consumers of LED light sources and lighting devices using them.

Boilerplate

2012 ◽  
Author(s):  
Margaret Jane Radin
Keyword(s):  
Economic Efficiency ◽  
Analytical Framework ◽  
Daily Basis ◽  
Regulatory Agencies ◽  
Jury Trial ◽  
Comprehensive Treatment ◽  
New Methods ◽  
And Control ◽  
Fine Print

Boilerplate—the fine-print terms and conditions that we become subject to when we click “I agree” online, rent an apartment, or enter an employment contract, for example—pervades all aspects of our modern lives. On a daily basis, most of us accept boilerplate provisions without realizing that should a dispute arise about a purchased good or service, the nonnegotiable boilerplate terms can deprive us of our right to jury trial and relieve providers of responsibility for harm. Boilerplate is the first comprehensive treatment of the problems posed by the increasing use of these terms, demonstrating how their use has degraded traditional notions of consent, agreement, and contract, and sacrificed core rights whose loss threatens the democratic order. This book examines attempts to justify the use of boilerplate provisions by claiming either that recipients freely consent to them or that economic efficiency demands them, and it finds these justifications wanting. It argues that our courts, legislatures, and regulatory agencies have fallen short in their evaluation and oversight of the use of boilerplate clauses. To improve legal evaluation of boilerplate, the book offers a new analytical framework, one that takes into account the nature of the rights affected, the quality of the recipient's consent, and the extent of the use of these terms. It goes on to offer possibilities for new methods of boilerplate evaluation and control, and concludes by discussing positive steps that NGOs, legislators, regulators, courts, and scholars could take to bring about better practices.

Neural networks approached for modelling river suspended sediment concentration due to tropical storms

2013 ◽  
Vol 11 (4) ◽  
pp. 457-466
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Suspended Sediment ◽  
Suspended Sediment Concentration ◽  
Time Series Data ◽  
Water Discharge ◽  
Sediment Concentration ◽  
Series Data ◽  
Generalized Regression Neural Network ◽  
Event Based

Artificial neural networks are one of the advanced technologies employed in hydrology modelling. This paper investigates the potential of two algorithm networks, the feed forward backpropagation (BP) and generalized regression neural network (GRNN) in comparison with the classical regression for modelling the event-based suspended sediment concentration at Jiasian diversion weir in Southern Taiwan. For this study, the hourly time series data comprised of water discharge, turbidity and suspended sediment concentration during the storm events in the year of 2002 are taken into account in the models. The statistical performances comparison showed that both BP and GRNN are superior to the classical regression in the weir sediment modelling. Additionally, the turbidity was found to be a dominant input variable over the water discharge for suspended sediment concentration estimation. Statistically, both neural network models can be successfully applied for the event-based suspended sediment concentration modelling in the weir studied herein when few data are available.

APPLICATION OF ACOUSTIC METHODS IN RESEARCHES OF THE BOTTOM SEDIMENT DYNAMICS

2018 ◽  
Author(s):  
Б. Дивинский ◽  
B. Divinskiy ◽  
И. Грюне ◽  
I. Gryune ◽  
Р. Косьян ◽  
...  
Keyword(s):  
Suspended Sediment ◽  
Sediment Concentration ◽  
Irregular Waves ◽  
Single Frequency ◽  
Contactless Measurement ◽  
Measurement Means ◽  
Uniform Field ◽  
Wave Flume ◽  
Acoustic Methods ◽  
Back Scattering

Acoustic methods belong to contactless measurement means, possess high spatial and time resolution. Thus, the use of multifrequency allows directly profile both concentration and granulometric structure of the suspended substances. In 2008 in the Big Wave Flume (Hanover, Germany) by efforts of the Russian and German scientists there have been carried out the experiment on studying the bottom material suspension laws under the influence of irregular waves. The Aquascat 1000 acoustic back scattering sensor (ABS) manufactured by British company Aquatec (www.aquatecsubsea.com), equipped by a three-frequency transmitter with frequencies 1,0, 2,0 and 3,84 MHz, has been set on distance of 0,75 m from the bottom and 111 m from wave generator at the total depth of 3,2 m. Several dozen series of measurements at various parameters of surface waves have been carried out. The general picture of suspension is so that the external dynamic influence (currents, wave movements, turbulence, gravitation forces) creates a non-uniform field (gradient) of the suspended particles and in most cases due to this the average size of particles undergoes to the spatial-time variations. For this reason while defining the mass concentration of suspended sediment, using the single frequency transmitter there is necessity for numerous definition of the suspension granulometric structure what by isn’t always possible. If two and more frequencies are used the observed results comparison can give the information on average diameters of particles and on that basis the calculation of suspended sediment concentration is possibleLet's emphasize the basic advantages of back scattering acoustic gauges usage: – Obtaining the particles sizes and concentration distribution profiles is possible; – The initial granulometric structure of bottom sediments can be unknown (at use of several frequencies). The following can be referred to some lacks of the device: – The system should be calibrated in laboratory conditions; – In a positive feedback conditions the iterative computing process can converge to zero or to infinity. In this case experiments with a variation of carrier frequencies chosen for the analysis allow partially solve the problem (say experiments with different frequencies pairs, as 2/1 of MHz or 4/2 MHz).

Assessment of multimorbidity of diseases in geriatric practice

2020 ◽  
pp. 17-21
Author(s):  
Mark Oprenko
Keyword(s):  
Quality Of Life ◽  
The Core ◽  
Definition Of

The definition of the multimorbidity concept reveals insufficient specificity of the comorbidity and multimorbidity definitions and, as a result, confusion in the use of these terms. Most authors are unanimous that the “core” of multimorbidity is presence of more than one disease in a patient. These coexisting diseases can be pathogenetically interconnected and non-interconnected. Regardless, the degree of multimorbidity always affects prognosis and quality of life.

Sign in / Sign up

Export Citation Format

Share Document