Pharmaceutical evaluation of atorvastatin-loaded nanostructured lipid carriers incorporated into the gelatin/hyaluronic acid/polycaprolactone scaffold for the skin tissue engineering

2020 ◽  
pp. 088532822097076
Author(s):  
Mahsa Ahmadi ◽  
Mehdi Mehdikhani ◽  
Jaleh Varshosaz ◽  
Shadi Farsaei ◽  
Hadis Torabi
Keyword(s):  
Particle Size ◽  
Hyaluronic Acid ◽  
Drug Release ◽  
Zeta Potential ◽  
Mtt Assay ◽  
Dermal Fibroblasts ◽  
Skin Regeneration ◽  
Nanostructured Lipid Carriers ◽  
In Vitro Degradation

In this study, gelatin/hyaluronic acid (HA) scaffolds containing different amounts of atorvastatin-loaded nanostructured lipid carriers (NLCs) coated entirely with polycaprolactone (PCL) film were fabricated for skin regeneration. 12 atorvastatin-loaded NLCs formulations were synthesized, and particle size, zeta potential, drug entrapment efficiency (EE), and drug release of the formulations were determined. The optimum freeze-dried atorvastatin-loaded NLCs were added in 3 different weight percentages to the gelatin and HA membranous scaffolds. Thereafter, the membranes were coated entirely by a thin layer of the PCL. They were characterized, and then mechanical properties, in vitro degradation and in vitro drug release were assessed. Moreover, human dermal fibroblasts (HDF) were cultured on the prepared nanocomposite scaffolds in order to investigate the cytotoxicity by the MTT assay after the first day, third day, and fifth day. Results revealed that the most favorable atorvastatin-loaded NLCs had 99.54 nm average particle size, −24.30 mV zeta potential, 97.98% EE, and 75.24% drug release within 237 hrs. Mechanical tests indicated that all the three scaffolds had approximately a 90 MPa elastic modulus which was more than two-fold of tensile modulus of normal human skin. The in vitro degradation test demonstrated that the membranes were degraded up to 98% after 5 days, and the scaffolds drug release efficiency (DRE) was in a range of 75–79% during those 5 days. The MTT assay results confirmed the cytocompatibility of the scaffolds. The scaffold containing 54.1 wt% NCLs was the optimum sample (S3). Scanning Electron Microscopy (SEM) images of the latter one showed the uniform distribution of the NLCs with an average size of 150 nm, and the images of cultured HDF illustrated the good cell attachment. In conclusion, suitable physicochemical and biological properties of the novel gelatin/HA/PCL nanocomposite scaffold containing 54.1 wt% atorvastatin-loaded NLCs (S3) can be a good candidate for skin regeneration.

scholarly journals FORMULATION AND CHARACTERIZATION OF PAPAIN LOADED SOLID LIPID NANOPARTICLES AGAINST HUMAN COLORECTAL ADENOCARCINOMA CELL LINE

2018 ◽  
Vol 11 (10) ◽  
pp. 393
Author(s):  
Suriyakala Perumal Chandran ◽  
Kannikaparameswari Nachimuthu
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Cell Viability ◽  
Cell Line ◽  
Solid Lipid Nanoparticles ◽  
Colorectal Adenocarcinoma ◽  
Lipid Nanoparticles ◽  
In Vitro Drug Release

Objective: Colorectal cancer is one of the most commonly diagnosed cancer and also most common gastrointestinal malignancy with high prevalence rate in the younger population. Usually, cancer cells are surrounded by a fibrin coat which is resistant to fibrinolytic degradation. This fibrin coat is act as self-protective against natural killing mechanism. The main objective was to prepare papain-loaded solid lipid nanoparticles (P-SLN) by melt dispersion-ultrasonication method and investigated the cytotoxic efficacy against colorectal adenocarcinoma (human colorectal adenocarcinoma [HCT 15]) cells.Methods: Optimized polymer ratio was characterized by differential scanning calorimetry, Fourier-transform infrared, X-ray diffraction, scanning electron microscopy, entrapment efficiency, particle size and zeta potential analysis, in vitro drug release, and in vitro cytotoxicity studies on HCT-15 colorectal adenocarcinoma cells.Results: The results showed that the particle size, morphological character and zeta potential value of optimized batch P-SLN were 265 nm, spherical and −26.5 Mv, respectively. The in vitro drug profile of P-SLN exhibited that it produced sustain drug release, and the cell viability of HCT-15 against P-SLN shown better efficacy than pure papain enzyme.Conclusion: P-SLNs were successfully prepared and investigated the in vitro drug release and in vitro cell viability against HCT-15 cell line.

scholarly journals PREPARATION, PHYSICAL CHARACTERIZATION, AND PHARMACOKINETIC STUDY OF DOCETAXEL NANOCRYSTALS

2019 ◽  
pp. 238-244
Author(s):  
ARVIND GANNIMITTA ◽  
PRATHIMA SRINIVAS ◽  
VENKATESHWAR REDDY A ◽  
PEDIREDDI SOBHITA RANI
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Water Solubility ◽  
Release Kinetics ◽  
Tween 80 ◽  
Fickian Diffusion ◽  
Sustained Drug Release ◽  
Egg Lecithin

Objective: The main objective of this study was to prepare and evaluate the nanocrystal formulation of docetaxel. Methods: Docetaxel nanocrystals were formulated to improve the water solubility. Docetaxel nanocrystals were prepared by nanoprecipitation method using Tween 80, egg lecithin, and povidone C-12 as stabilizers and poly(lactic-co-glycolic acid) (PLGA) as polymer in acceptable limits. A total of 16 formulations were prepared by changing stabilizer and polymer ratios. The prepared nanocrystals were characterized by particle size, zeta potential, crystalline structure, surface morphology, assay, saturation solubility, and in vitro drug release. Results: Based on particle size, polydispersity index, and zeta potential data, four formulations were optimized. The formulation containing Tween 80 as stabilizer has shown lowest particle size and better drug release than the formulations containing egg lecithin and povidone C-12 as stabilizers. The formulation containing Tween 80 and PLGA has shown still lower sized particles than the Tween 80 alone and exhibited prolonged sustained drug release. The release kinetics of formulations containing Tween 80 and PLGA followed zero-order release kinetics and formulations containing egg lecithin and povidone C-12 followed Higuchi diffusion (non-Fickian). Conclusion: From the study, we concluded that as the type and concentration of stabilizer changed the size and shape of the crystals were also changed and the formulations showed sustained drug release with non-Fickian diffusion.

scholarly journals FORMULATION OF POLYMERIC NANOSUSPENSION CONTAINING PRAMIPEXOLE DIHYDROCHLORIDE AND HESPERIDIN FOR IMPROVED TREATMENT OF PARKINSON’S DISEASES

2018 ◽  
Vol 11 ◽  
Author(s):  
Somasundaram I
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Burst Release ◽  
Drug Content ◽  
Pramipexole Dihydrochloride ◽  
Vitro Release

Aims and Objectives: The present study is to formulate the nanosuspension containing a hydrophilic drug pramipexole dihydrochloride and hesperidin and to increase the drug entrapment efficiency.Methods: Hesperidin and pramipexole dihydrochloride loaded in chitosan nanosuspension is prepared by ionic gelation method using chitosan and tripolyphosphate. There was no incompatibility observed between the drug and polymer through Fourier transform infrared and differential scanning calorimetric. Various other parameters such as particle size, zeta potential, scanning electron microscope, drug content, drug entrapment efficiency, and in vitro release have been utilized for the characterization of nanoparticles.Results and Discussion: The average size of particle is 188 nm; zeta potential is 46.7 mV; drug content of 0.364±0.25 mg/ml; entrapment efficiency of 72.8% is obtained with HPN3 formulation. The PHC1 shows the highest drug release followed by PHC2 due to low concentration of polymer and PHC4 and PHC5 show less drug release due to high concentration of polymer. The in vitro release of PHC3 is 85.2%, initial the burst release is shown which is approximately 60% in 8 h; then, slow release later on drastic reduction in release rate is shown in 24 h. The in vivo study histopathological report confers the effective protective against rotenone induces Parkinson’s.Conclusion: PHC3 was chosen as the best formulation due to its reduced particle size and controlled release at optimum polymer concentration which may be used to treat Parkinson’s disease effectively..

scholarly journals FABRICATION AND IN VITRO CHARACTERIZATION OF A NOVEL NANOSUSPENSION OF TELMISARTAN: A POORLY SOLUBLE DRUG PREPARED BY ANTISOLVENT PRECIPITATION TECHNIQUE USING 33 FACTORIAL DESIGN

2020 ◽  
pp. 286-294
Author(s):  
PRASANTA KUMAR MOHAPATRA ◽  
SIREESHA ◽  
VAIBHAV RATHORE ◽  
HARISH CHANDRA VERMA ◽  
BIBHUTI PRASAD RATH ◽  
...  
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Dissolution Rate ◽  
Release Kinetics ◽  
Precipitation Method ◽  
Lauryl Sulfate ◽  
Poorly Soluble ◽  
Poorly Soluble Drug

Objective: The motivation behind the current examination was to build the solvency and dissolution rate of an antihypertensive drug telmisartan by the planning of nanosuspension by precipitation method at the research facility scale. We researched the nanoparticle manufacture of telmisartan employing a 33 factorial experimental configuration considering the impacts of nanosuspension on the physical, morphological, and dissolution properties of telmisartan. Methods: To get ready, nanosuspension particles of an ineffectively dissolvable drug are moreover of a drug solution to the anti-solvent leads to abrupt supersaturation and precipitation the making of nanoparticles. The nanosuspension particles of a poorly soluble drug loaded with urea and surfactants (sodium lauryl sulfate (SLS), poloxamer 188, Tween 80) have been prepared by a precipitation method. The nanosuspension particles were characterized for particle size, zeta potential, Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), in vitro drug release, and release kinetics. Results: The readily optimized batch nanosuspension particles evaluated and exhibited the particle size (750 nm), zeta potential (-24.33 mV), differential scanning calorimetry (DSC) drug exhibited a change in crystalline form to amorphous, in vitro dissolution (F12 was higher 95% within 5 min) and drug release kinetics. The formulation parameter of surfactant concentration is optimized. Conclusion: The formulation of the nanosuspension approach has been shown to substantial improvement in the dissolution rate, thereby enhancing the oral bioavailability with the future development of this technology.

scholarly journals Double Optimization of Rivastigmine-Loaded Nanostructured Lipid Carriers (NLC) for Nose-to-Brain Delivery Using the Quality by Design (QbD) Approach: Formulation Variables and Instrumental Parameters

Pharmaceutics ◽  
2020 ◽  
Vol 12 (7) ◽  
pp. 599 ◽  
Author(s):  
Sara Cunha ◽  
Cláudia Pina Costa ◽  
Joana A. Loureiro ◽  
Jorge Alves ◽  
Andreia F. Peixoto ◽  
...  
Keyword(s):  
Particle Size ◽  
High Pressure ◽  
Drug Release ◽  
Quality By Design ◽  
Nanostructured Lipid Carriers ◽  
Brain Delivery ◽  
High Pressure Homogenization ◽  
Ultrasound Technique ◽  
Formulation Variables

Rivastigmine is a drug commonly used in the management of Alzheimer’s disease that shows bioavailability problems. To overcome this, the use of nanosystems, such as nanostructured lipid carriers (NLC), administered through alternative routes seems promising. In this work, we performed a double optimization of a rivastigmine-loaded NLC formulation for direct drug delivery from the nose to the brain using the quality by design (QbD) approach, whereby the quality target product profile (QTPP) was the requisite for nose to brain delivery. The experiments started with the optimization of the formulation variables (or critical material attributes—CMAs) using a central composite design. The rivastigmine-loaded NLC formulations with the best critical quality attributes (CQAs) of particle size, polydispersity index (PDI), zeta potential (ZP), and encapsulation efficiency (EE) were selected for the second optimization, which was related to the production methods (ultrasound technique and high-pressure homogenization). The most suitable instrumental parameters for the production of NLC were analyzed through a Box–Behnken design, with the same CQAs being evaluated for the first optimization. For the second part of the optimization studies, were selected two rivastigmine-loaded NLC formulations: one produced by ultrasound technique and the other by the high-pressure homogenization (HPH) method. Afterwards, the pH and osmolarity of these formulations were adjusted to the physiological nasal mucosa values and in vitro drug release studies were performed. The results of the first part of the optimization showed that the most adequate ratios of lipids and surfactants were 7.49:1.94 and 4.5:0.5 (%, w/w), respectively. From the second part of the optimization, the results for the particle size, PDI, ZP, and EE of the rivastigmine-loaded NLC formulations produced by ultrasound technique and HPH method were, respectively, 114.0 ± 1.9 nm and 109.0 ± 0.9 nm; 0.221 ± 0.003 and 0.196 ± 0.007; −30.6 ± 0.3 mV and −30.5 ± 0.3 mV; 97.0 ± 0.5% and 97.2 ± 0.3%. Herein, the HPH was selected as the most suitable production method, although the ultrasound technique has also shown effectiveness. In addition, no significant changes in CQAs were observed after 90 days of storage of the formulations at different temperatures. In vitro studies showed that the release of rivastigmine followed a non-Fickian mechanism, with an initial fast drug release followed by a prolonged release over 48 h. This study has optimized a rivastigmine-loaded NLC formulation produced by the HPH method for nose-to-brain delivery of rivastigmine. The next step is for in vitro and in vivo experiments to demonstrate preclinical efficacy and safety. QbD was demonstrated to be a useful approach for the optimization of NLC formulations for which specific physicochemical requisites can be identified.

scholarly journals Formulation, Optimization, and Characterization of Repaglinide Loaded Nanocrystal for Diabetes Therapy

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Gajanan Shinde ◽  
Mitesh Patel ◽  
Manan Mehta ◽  
Rajesh Kesarla ◽  
Ganesh Bangale
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Polymer Concentration ◽  
Study Data ◽  
Stability Study ◽  
Diabetes Therapy ◽  
Peg 4000 ◽  
Number Of Cycles

The aim of the present investigation was to formulate and characterize nanocrystal formulation of Repaglinide for diabetes therapy. Formulation was done by high pressure homogenization. HPH pressure and cycles range were screened by preliminary batches (T1 and T2). 5, 8, and 10 cycles and 500 to 1500 bar pressure range had kept for further investigation. Taguchi design was used to optimize type of polymer, % polymer concentration, number of cycles, and HPH pressure for nanocrystal formulation. Formulations were characterized for particle size, zeta potential, and in vitro drug release. Optimized formulation (NC 3) showed particle size of 187 nm, zeta potential of −29.4 mv, and % drug release of 80.58% and it was used for further study. Data analysis proved significant effects of factors on responses. Polydispersity index (PDI) Analysis of optimized formulation were found to be 0.248. SEM showed nanocrystal aggregation of drug, may be due to water removal process. DSC showed slight change in crystallinity, may be due to the presence of PEG 4000. Stability study was carried out for 3 months. It indicated no significant change in particle size and zeta potential. However, further studies in higher animals and human being need to be performed before this formulation can be commercially exploited.

scholarly journals Development and Characterization of Ofloxacin & Prednisolone Loaded Nanostructured Lipid Carriers (Nlc) for Topical Route

2019 ◽  
Vol 4 (1) ◽  
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Release Kinetics ◽  
Morphological Characteristics ◽  
Nanostructured Lipid Carriers ◽  
Diffusion Method ◽  
Prolonged Release ◽  
In Vitro Drug Release ◽  
Drug Content

Aim: The present study was designed to develop and characterize nanostructured lipid carriers (NLC) of Ofloxacin and Prednisolone for topical use in case of infections associated with inflammation. Materials and Methods: Ofloxacin was obtained as gift sample from Mankind Pharma Ltd, VillKyarta, P.O. Misserwal, Poonta Sahib, Sir Mour. H.P. Whereas Prednisolone was purchased from Yarrow chem., Mumbai. It was evaluated for its pre-formulation studies (organoleptic properties, melting point, solubility, compatibility, max. wavelength of absorption). NLCs were prepared through melt-emulsification followed by ultra-sonication technique. Further optimized batch of NLCs was incorporated into Gel. Formulated NLCs were evaluated in terms of morphological characteristics, particle size (Polydispersity Index), drug content, In-vitro drug release (using egg membrane), drug release kinetics (Ritger-Peppas diffusion method). Finally, gel containing NLCs was studied by physical characteristics, pH, viscosity, spreadability, drug content, In-vitro drug release and its kinetics. Results and Discussion: In pre-formulation study, drugs were found having the similar properties as described in Indian Pharmacopoeia (IP) and United States Pharmacopoeia (USP). SEM photomicrograph revealed that NLCs were spherical with more or less smooth surface; particle size 512.3-1703 nm and PDI- 0.399-0.742 (ofloxacin) and particle size 539.3-1736.7 nm and PDI- 0.335 - 0.711 (prednisolone);drug content was found in range of 56.7 - 75.6% for ofloxacin and 65.9 – 81.8% for prednisolone. NLC1 demonstrated maximum release rate with 83.37±1.70% and NLC8 73.96±0.53%.NLC6 was best fitted in Korsmeyer - peppas model as the regression coefficients were 0.960, 0.964, 0.977, 0.950, 0.980 & 0.987 respectively and prednisolone NLC 9 (0.953) and they were close to 1. Conclusion: In conclusion, the prepared NLCs had prolonged release effects with good potential for topical delivery of NLC based gel formulation of ofloxacin& prednisolone.

scholarly journals FORMULATION, DEVELOPMENT AND CHARACTERISATION OF NIMODIPINE LOADED SOLID LIPID NANOPARTICLES

2020 ◽  
pp. 265-271
Author(s):  
REMYA P. N. ◽  
DAMODHARAN N.
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Stearic Acid ◽  
Palmitic Acid ◽  
Solid Lipid Nanoparticles ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
In Vitro Drug Release

Objective: The aim of the present study is to develop solid lipid nanoparticles (SLNs) of Nimodipine using hot homogenization followed by ultrasonication technique and to improve the dissolution characteristics of the drug. Methods: The Nimodipine-loaded SLN was prepared using palmitic acid and stearic acid as a lipid matrix and Tween-80 as an emulsifier by a hot homogenization and ultra-sonication method. The physicochemical characteristics of SLN were investigated for entrapment efficiency, zeta potential, in vitro drug release, particle size analysis, Fourier transform infrared studies, scanning electron microscopy, and stability studies. Results: The mean particle size, PDI, Zeta potential and entrapment efficiency of optimized Nimodipine SLN formulation of stearic acid was found to be 119.54 nm, 0.165,-17.60mV, 85% and for palmitic acid was found to be 132.54 nm, 0.155,-17.0mV, 81% respectively. In vitro drug release studies indicated that after an initial burst release, SLN could provide prolonged release of Nimodipine. The selected SLNs have shown good stability for a period of 180 d. Conclusion: SLN formulations showed the best results in EE as well as in vitro drug release and therefore, these results indicate that SLN might be a promising delivery system to enhance the release of Nimodipine.

scholarly journals FORMULATION AND EVALUATION OF CURCUMIN LOADED LIPOSOME AND ITS BIO-ENHANCEMENT

2019 ◽  
Vol 9 (4-A) ◽  
pp. 425-437
Author(s):  
Khushboo Verma ◽  
Jhakeshwar Prasad ◽  
Suman Saha ◽  
Surabhi Sahu
Keyword(s):  
Thin Film ◽  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
High Performance ◽  
Encapsulation Efficiency ◽  
Mean Particle Size ◽  
Liposome Formulation

The aim of this work was to develop and evaluate curcumin loaded liposome and its bio- enhancement. Curcumin was selected as a natural drug for liposome formulation. Curcumin show variety of biological activity but it also shows poor bioavailability due to low aqueous solubility (1 µg/ml), poor absorption and rapid metabolism so that piperine was selected as bio enhancer to improve curcumin bioavailability. Soy lecithin and cholesterol were used to prepared curcumin and curcumin-piperine loaded liposome at different ratio by thin film hydration method because of easy to perform, and high encapsulation rates of lipid. The all liposome formulations (F1-F5) were evaluated by mean particle size, polydispersity index, zeta potential, encapsulation efficiency and drug release. Bioavailability was also determined on rat. Blood samples were collected at specific intervals, and plasma was separated by ultracentrifugation. Plasma was analyzed by high-performance liquid chromatography at 425 nm taking acetonitrile: water (75:25 v/v) acidified with 2% acetic acid as a mobile phase at a flow rate of 0.5 ml/min using C18 column. The mean particle size was found in the range between 800-1100 that indicate liposome are large unilamellar vesical types. By zeta potential study its conform that the all formulation was stable. The encapsulation efficiency of all liposome formulation are varied between 59-67%. In vitro drug release was analyse in 7.4 pH phosphate buffer, the maximum %CDR observed at the 12 hrs., and formulation are follow sustained release thus they reduce metabolism, good absorption rate which improve bioavailability of drug. From in-vivo study, it is clear that curcumin-piperine liposomal formulation, increases Cmax, area under the curve, and mean residence time significantly as compared to pure curcumin and pure curcumin liposome. Keywords: liposome; Curcumin; Piperine, Thin film hydration method; Bioavailability

scholarly journals Design, Development and Evaluation Of Anti-Hypertensive Drug Solid Lipid Nano Particles

2021 ◽  
Vol 11 (4) ◽  
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Zeta Potential ◽  
Entrapment Efficiency ◽  
Nano Particles ◽  
Release Mechanism ◽  
In Vitro Drug Release ◽  
Solid Lipid ◽  
Wide Range

Recently, solid lipid Nano-particles have received much attention by the researchers owing to its biodegradability, biocompatibility and the ability to deliver a wide range of drugs. The aim of the present study was to design Diltiazem solid lipid Nano-particles and to evaluate them. Diltiazem solid lipid Nano-particles were prepared by hot homogenization technique using different lipids (Tristearin, GMS and Comprital), soy lecithin as stabilizers and tween 80, Poloxamer as surfactants. The Nano-particles were evaluated for particle size & PDI, zeta potential, entrapment efficiency and in vitro drug release. The particle size ranged from 49.7 to 523.7 nm. PDI of all formulations were good within the range of 0.189 to 0.427. The zeta potential ranged from -10.5 to -29.6 Mv, Entrapment efficiency of all formulations were observed was in the range of 78.68 to 95.23 %. The cumulative percentage release of Diltiazem from different Diltiazem Nano-particles varied from 53.36 to 88.74% depending upon the drug lipid ratio and the type of lipid used. The average percentage of drug released from different SLNs after 24 hours showed in the following order: F9 (53.35%) < F6 (56.75%) < F4 (61.74%) < F7 (63.8%) < F5(67.77%) < F8(69.04%) < F3(75.31%) < F1(79.36%) <F2 (88.74%) respectively. The release kinetic studies showed that the release was first order diffusion controlled and the n values obtained from the Korsmeyer-Peppa’s model indicated the release mechanism was Quasi-Fickian type (n-value of 0.47). Keywords: Diltiazem, solid lipid Nano-particles, FTIR, in vitro drug release.

Sign in / Sign up

Export Citation Format

Share Document