Vinyl-terminated butadiene acrylonitrile improves the toughness, processing window, and thermal stability of bismaleimide resin

2016 ◽  
Vol 29 (10) ◽  
pp. 1199-1208 ◽  
Author(s):  
Dezhi Wang ◽  
Xin Wang ◽  
Lizhu Liu ◽  
Chunyan Qu ◽  
Changwei Liu ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Mechanical Performance ◽  
Resin System ◽  
Excellent Performance ◽  
Bismaleimide Resin ◽  
Processing Window ◽  
Low Viscosity ◽  
Isothermal Test ◽  
The Impact ◽  
Thermal Stability Of

Structural materials with excellent toughness, a wide processing window, outstanding mechanical performance, and high thermal stability are highly desired in engineering. This work reports a novel bismaleimide (BMI) resin system fabricated using bis[4-(4-maleimidephen-oxy)phenyl)]propane (BMPP), 1-(2-methyl-5-(2,5-dioxo-2H-pyrrol-1(5 H)-yl) phenyl)-1H-pyrrole-2,5-dione (BTM), and diallyl bisphenol A (DABPA) by a melt method. The behaviors of the BTM/BMPP/DABPA resin were modified by adding vinyl-terminated butadiene acrylonitrile (VTBN) in various amounts. The cured BTM/BMPP/DABPA/VTBN resin system exhibited all of the abovementioned desirable properties. Excellent performance was achieved by the post-cured BMI resin containing 6 phr of VTBN (VTBN-6). The glass transition temperature ( Tg) and the 5% weight loss temperature of VTBN-6 were 278°C and 408°C, respectively. Relative to VTBN-0 (BMI resin without VTBN), the impact strength of cured VTBN-6 (12.32 KJ/m2) improved by 45.6%, and the fracture toughness values, KIC and GIC, increased by 48.7% and 26%, respectively. Moreover, the prepolymer of VTBN-6 exhibited low viscosity over a wide temperature range (70–200°C) under dynamic conditions and for an extended time (70 min; 75% improvement over VTBN-0) in an isothermal test. These results confirm the wide processing window of VTBN-6. The high toughness of the VTBN-containing BMI resin was compatible with other excellent performances of the modified resin.

Evaluation of the Impact of Fatty Acid Methyl Ester (FAME) Contamination on the Thermal Stability of Jet A

2013 ◽  
Author(s):  
Jr Morris ◽  
Shardo Robert W. ◽  
Higgins James ◽  
Cook Kim ◽  
Tanner Rhonda ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Fatty Acid ◽  
Methyl Ester ◽  
Fatty Acid Methyl Ester ◽  
Acid Methyl Ester ◽  
Acid Methyl ◽  
The Impact ◽  
Thermal Stability Of

scholarly journals Mechanical and thermal stability of retained austenite in plastically deformed bainite-based TRIP-aided medium-Mn steels

2021 ◽  
Vol 21 (3) ◽  
Author(s):  
Aleksandra Kozłowska ◽  
Adam Grajcar ◽  
Aleksandra Janik ◽  
Krzysztof Radwański ◽  
Ulrich Krupp ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Thermal Stability ◽  
Retained Austenite ◽  
Elevated Temperatures ◽  
Mechanical Performance ◽  
Mechanical Stability ◽  
Electron Backscatter Diffraction ◽  
Cost Effective ◽  
Tensile Tests ◽  
Thermal Stability Of

AbstractAdvanced medium-Mn sheet steels show an opportunity for the development of cost-effective and light-weight automotive parts with improved safety and optimized environmental performance. These steels utilize the strain-induced martensitic transformation of metastable retained austenite to improve the strength–ductility balance. The improvement of mechanical performance is related to the tailored thermal and mechanical stabilities of retained austenite. The mechanical stability of retained austenite was estimated in static tensile tests over a wide temperature range from 20 °C to 200 °C. The thermal stability of retained austenite during heating at elevated temperatures was assessed by means of dilatometry. The phase composition and microstructure evolution were investigated by means of scanning electron microscopy, electron backscatter diffraction, X-ray diffraction and transmission electron microscopy techniques. It was shown that the retained austenite stability shows a pronounced temperature dependence and is also stimulated by the manganese addition in a 3–5% range.

Flame-retardant behaviors of aluminum phosphates coated sepiolite in epoxy resin

2020 ◽  
pp. 073490412093408
Author(s):  
Wei Yan ◽  
Pu Xie ◽  
Zhengwei Yang ◽  
Guangjin Luo ◽  
Weijiang Huang ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Flame Retardant ◽  
Epoxy Resin ◽  
Mechanical Performance ◽  
Oxygen Index ◽  
One Pot ◽  
Heterogeneous Precipitation ◽  
Aluminum Phosphates ◽  
Thermal Stability Of ◽  
Limited Oxygen

Aluminum phosphates coated sepiolite nanocomposite was fabricated via a simple one-pot heterogeneous precipitation strategy, and the effects of aluminum phosphates on the morphology of aluminum phosphates coated sepiolite were investigated. Moreover, the effect of aluminum phosphates coated sepiolite on the flame-retardant behavior, mechanical properties, and thermal stability of epoxy resin have been discussed. The results indicated that the introduction of only 20 wt% aluminum phosphates coated sepiolite in epoxy resin increased the limited oxygen index from 21.8% to 30.1%, thus the material met the UL-94 V-0 rating. Thermogravimetric analyses revealed that char yield increased in the presence of aluminum phosphates coated sepiolite form thermally stable carbonaceous char. Aluminum phosphates–coated sepiolite could improve the mechanical performance, thermal stability of epoxy resin.

Properties of HDPE/Clay/Wood Nanocomposites

2007 ◽  
Author(s):  
Q. Wu ◽  
Y. Lei ◽  
F. Yao ◽  
Y. Xu ◽  
K. Lian
Keyword(s):  
Thermal Stability ◽  
Tensile Elongation ◽  
Tensile Modulus ◽  
Crystallization Rate ◽  
Clay Content ◽  
Melt Compounding ◽  
Storage And Loss Moduli ◽  
Organic Clay ◽  
The Impact ◽  
Thermal Stability Of

Composites based on high density polyethylene (HDPE), pine flour, and organic clay were made by melt compounding and injection molding. The influence of clay on crystallization behavior, mechanical properties, water absorption, and thermal stability of HDPE/pine composites were investigated. The HDPE/pine composites containing exfoliated clay were made by a two-step melt compounding procedure with a maleated polyethylene (MAPE) as a compatibilizer. Adding 2% clay to a HDPE/pine composite without MAPE decreased the crystallization temperature (Tc) and rate, and the crystallinity level. When 2% MAPE was added, the Tc and crystallization rate increased, but the crystallinity level was lowered. The flexural strength and the tensile strength of HDPE/pine composites increased 19.6% and 24.2% respectively with addition of 1% clay but then decreased slightly as the clay content was increased to 3%. The tensile modulus and tensile elongation were increased 11.8% and 13% respectively with addition of 1% clay but the storage and loss moduli barely change as the clay content was increased to 3%. The impact strength was lowered 7.5% by adding 1% clay, but did not decrease further as more clay was added. The moisture content and thickness swelling of the HDPE/pine composites was reduced by the clay, but did not improve the thermal stability.

The Effects of Oil Palm Fruit Bunch (OPFB) Fiber and Coupling Agent Loadings on the Performance of Hybrid Composites

2012 ◽  
Vol 535-537 ◽  
pp. 154-160 ◽  
Author(s):  
Anizah Kalam ◽  
M.N. Berhan ◽  
Hanafi Ismail
Keyword(s):  
Thermal Stability ◽  
Tensile Strength ◽  
Oil Palm ◽  
Hybrid Composites ◽  
Tensile Modulus ◽  
Palm Fruit ◽  
Degradation Tests ◽  
Mechanical Performances ◽  
The Impact ◽  
Thermal Stability Of

Hybrid composites were prepared by incorporating oil palm fruit bunch (OPFB) fibre in the mixture of clay and polypropylene as secondary filler. OPFB and MAPP loadings were varied to investigate it effects on the performance. Tensile and impact tests were performed on the hybrid composites to evaluate their mechanical performances. Water absorption and thermal degradation tests were also conducted on the hybrid composites. Results indicated that the incorporation of OPFB in PP/PPnanoclay has decreased the thermal stability of hybrid composites. Tensile modulus of hybrid composites increased as the OPFB loading increases and further increased with the increasing of MAPP loading. Generally the tensile strength has decreased with the addition of OPFB, however slight increased was observed when the MAPP loading was increased. The impact strength has also increased with the increasing of OPFB for higher MAPP loading.

The impact of calendar aging on the thermal stability of a LiMn2O4–Li(Ni1/3Mn1/3Co1/3)O2/graphite lithium-ion cell

2014 ◽  
Vol 268 ◽  
pp. 315-325 ◽  
Author(s):  
Patrick Röder ◽  
Barbara Stiaszny ◽  
Jörg C. Ziegler ◽  
Nilüfer Baba ◽  
Paul Lagaly ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Lithium Ion ◽  
Lithium Ion Cell ◽  
The Impact ◽  
Thermal Stability Of
Sign in / Sign up

Export Citation Format

Share Document