The Effects of Oil Palm Fruit Bunch (OPFB) Fiber and Coupling Agent Loadings on the Performance of Hybrid Composites

2012 ◽  
Vol 535-537 ◽  
pp. 154-160 ◽  
Author(s):  
Anizah Kalam ◽  
M.N. Berhan ◽  
Hanafi Ismail
Keyword(s):  
Thermal Stability ◽  
Tensile Strength ◽  
Oil Palm ◽  
Hybrid Composites ◽  
Tensile Modulus ◽  
Palm Fruit ◽  
Degradation Tests ◽  
Mechanical Performances ◽  
The Impact ◽  
Thermal Stability Of

Hybrid composites were prepared by incorporating oil palm fruit bunch (OPFB) fibre in the mixture of clay and polypropylene as secondary filler. OPFB and MAPP loadings were varied to investigate it effects on the performance. Tensile and impact tests were performed on the hybrid composites to evaluate their mechanical performances. Water absorption and thermal degradation tests were also conducted on the hybrid composites. Results indicated that the incorporation of OPFB in PP/PPnanoclay has decreased the thermal stability of hybrid composites. Tensile modulus of hybrid composites increased as the OPFB loading increases and further increased with the increasing of MAPP loading. Generally the tensile strength has decreased with the addition of OPFB, however slight increased was observed when the MAPP loading was increased. The impact strength has also increased with the increasing of OPFB for higher MAPP loading.

Properties of HDPE/Clay/Wood Nanocomposites

2007 ◽  
Author(s):  
Q. Wu ◽  
Y. Lei ◽  
F. Yao ◽  
Y. Xu ◽  
K. Lian
Keyword(s):  
Thermal Stability ◽  
Tensile Elongation ◽  
Tensile Modulus ◽  
Crystallization Rate ◽  
Clay Content ◽  
Melt Compounding ◽  
Storage And Loss Moduli ◽  
Organic Clay ◽  
The Impact ◽  
Thermal Stability Of

Composites based on high density polyethylene (HDPE), pine flour, and organic clay were made by melt compounding and injection molding. The influence of clay on crystallization behavior, mechanical properties, water absorption, and thermal stability of HDPE/pine composites were investigated. The HDPE/pine composites containing exfoliated clay were made by a two-step melt compounding procedure with a maleated polyethylene (MAPE) as a compatibilizer. Adding 2% clay to a HDPE/pine composite without MAPE decreased the crystallization temperature (Tc) and rate, and the crystallinity level. When 2% MAPE was added, the Tc and crystallization rate increased, but the crystallinity level was lowered. The flexural strength and the tensile strength of HDPE/pine composites increased 19.6% and 24.2% respectively with addition of 1% clay but then decreased slightly as the clay content was increased to 3%. The tensile modulus and tensile elongation were increased 11.8% and 13% respectively with addition of 1% clay but the storage and loss moduli barely change as the clay content was increased to 3%. The impact strength was lowered 7.5% by adding 1% clay, but did not decrease further as more clay was added. The moisture content and thickness swelling of the HDPE/pine composites was reduced by the clay, but did not improve the thermal stability.

scholarly journals Properties of Polylactic Acid Reinforced by Hydroxyapatite Modified Nanocellulose

Polymers ◽  
2019 ◽  
Vol 11 (6) ◽  
pp. 1009 ◽  
Author(s):  
Jianxiao Lu ◽  
Chuanyue Sun ◽  
Kexin Yang ◽  
Kaili Wang ◽  
Yingyi Jiang ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Tensile Strength ◽  
Thermogravimetric Analysis ◽  
Thermodynamic Properties ◽  
Composite Film ◽  
Polylactic Acid ◽  
Tensile Modulus ◽  
The Poor ◽  
Thermal Stability Of

Polylactic acid (PLA) is one of the most promising bio-based materials, but its inherent hydrophobicity limits its application. Although nanocellulose (NCC) is a desirable reinforcement for PLA, the poor interface compatibility between the two has been a challenge. In this work, hydroxyapatite (HAP) modified NCC was prepared, and the obtained NCC/HAP reinforcement was used to prepare PLA/NCC-HAP composites. Different ratios of NCC to HAP were studied to explore their effects on the mechanical and thermodynamic properties of the composites. When the ratio of NCC to HAP was 30/70, the tensile strength and tensile modulus of the composite film reached 45.6 MPa and 2.34 GPa, respectively. Thermogravimetric analysis results indicate that thermal stability of the composites was significantly improved compared with pure PLA, reaching 346.6 °C. The above revelations show that NCC/HAP significantly improved the interface compatibility with PLA matrix.

Evaluation of the Impact of Fatty Acid Methyl Ester (FAME) Contamination on the Thermal Stability of Jet A

2013 ◽  
Author(s):  
Jr Morris ◽  
Shardo Robert W. ◽  
Higgins James ◽  
Cook Kim ◽  
Tanner Rhonda ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Fatty Acid ◽  
Methyl Ester ◽  
Fatty Acid Methyl Ester ◽  
Acid Methyl Ester ◽  
Acid Methyl ◽  
The Impact ◽  
Thermal Stability Of

The Preparation and Property Research on Laponite-Poly (L-Lactide) Composite Film

2013 ◽  
Vol 750-752 ◽  
pp. 1919-1923 ◽  
Author(s):  
Guo Xian Zhou ◽  
Ming Wei Yuan ◽  
Lin Jiang ◽  
Ming Long Yuan ◽  
Hong Li Li
Keyword(s):  
Electron Microscopy ◽  
Thermal Stability ◽  
Tensile Strength ◽  
Composite Film ◽  
Composite Films ◽  
Complexing Agent ◽  
Solution Blending ◽  
Method Of Solution ◽  
Thermal Stability Of ◽  
Scanning Electron

The laponite-poly (L-lactide) composite films are prepared by the method of solution blending with polylactide (PLA) and laponite. The result shows that the homogeneous and smooth composite film is prepared with 1, 4-dioxane. Thermogravimetry analysis (TG) and tensile strength studies demonstrate that the thermal stability and tensile strength are improved with the laponite added. The scanning electron microscopy (SEM) measurement indicates that the pores of composite films get uniform and network structure is more and more compact with compared to pure PLA film. The present study reveals that the laponite as a complexing agent can improve the mechanical properties and thermal stability of PLA.

scholarly journals Mechanical Properties of Oil Palm Shell Composites

2016 ◽  
Vol 2016 ◽  
pp. 1-7 ◽  
Author(s):  
J. Sahari ◽  
M. A. Maleque
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Oil Palm ◽  
Volume Fraction ◽  
Unsaturated Polyester ◽  
Tensile Modulus ◽  
Sem Analysis ◽  
Palm Shell ◽  
Pull Out ◽  
Oil Palm Shell

The mechanical properties of oil palm shell (OPS) composites were investigated with different volume fraction of OPS such as 0%, 10%, 20%, and 30% using unsaturated polyester (UPE) as a matrix. The results presented that the tensile strength and tensile modulus of the UPE/OPS composites increased as the OPS loading increased. The highest tensile modulus of UPE/OPS was obtained at 30 vol% of OPS with the value of 8.50 GPa. The tensile strength of the composites was 1.15, 1.17, and 1.18 times higher than the pure UPE matrix for 10, 20, and 30 vol% of OPS, respectively. The FTIR spectra showed the change of functional group of composites with different volume fractions of OPS. SEM analysis shows the filler pull-out present in the composites which proved the poor filler-matrix interfacial bonding.

scholarly journals The Use of POSS-Based Nanoadditives for Cable-Grade PVC: Effects on its Thermal Stability

Polymers ◽  
2019 ◽  
Vol 11 (7) ◽  
pp. 1105 ◽  
Author(s):  
Palin ◽  
Rombolà ◽  
Milanesio ◽  
Boccaleri
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Thermogravimetric Analysis ◽  
Thermal Degradation ◽  
Additive Effects ◽  
Poly Vinyl Chloride ◽  
The Family ◽  
Mechanical Performances ◽  
Oligomeric Silsesquioxane ◽  
Thermal Stability Of

Plasticized–Poly(vinyl chloride) (P-PVC) for cables and insulation requires performances related to outdoor, indoor and submarine contexts and reduction of noxious release of HCl-containing fumes in case of thermal degradation or fire. Introducing suitable nanomaterials in polymer-based nanocomposites can be an answer to this clue. In this work, an industry-compliant cable-grade P-PVC formulation was added with nanostructured materials belonging to the family of Polyhedral Oligomeric Silsesquioxane (POSS). The effects of the nanomaterials, alone and in synergy with HCl scavenging agents as zeolites and hydrotalcites, on the thermal stability and HCl evolution of P-PVC were deeply investigated by thermogravimetric analysis and reference ASTM methods. Moreover, hardness and mechanical properties were studied in order to highlight the effects of these additives in the perspective of final industrial uses. The data demonstrated relevant improvements in the thermal stability of the samples added with nanomaterials, already with concentrations of POSS down to 0.31 phr and interesting additive effects of POSS with zeolites and hydrotalcites for HCl release reduction without losing mechanical performances.

Hybrid Nanocomposites of Poly(Lactic Acid)/Thermoplastic Polyurethane with Nanosilica/Montmorillonite

2019 ◽  
Vol 947 ◽  
pp. 77-81
Author(s):  
Natsuda Palawat ◽  
Phasawat Chaiwutthinan ◽  
Sarintorn Limpanart ◽  
Amnouy Larpkasemsuk ◽  
Anyaporn Boonmahitthisud
Keyword(s):  
Thermal Stability ◽  
Tensile Strength ◽  
Impact Strength ◽  
Young’S Modulus ◽  
Young's Modulus ◽  
Thermoplastic Polyurethane ◽  
Hybrid Nanocomposites ◽  
Poly Lactic Acid ◽  
Elongation At Break ◽  
Thermal Stability Of

The aim of this study is to improve the physical properties of poly(lactic acid) (PLA) by incorporating thermoplastic polyurethane (TPU), organo-montmorillonite (OMMT) and/or nanosilica (nSiO2). PLA was first melt mixed with five loadings of TPU (10–50 wt%) on a twin-screw extruder, followed by injection molding. The addition of TPU was found to increase the impact strength, elongation at break and thermal stability of the blends, but decrease the tensile strength and Young’s modulus. Based on a better combination of the mechanical properties, the 70/30 (w/w) PLA/TPU blend was selected for preparing both single and hybrid nanocomposites with a fix total nanofiller content of 5 parts per hundred of resin (phr), and the OMMT/nSiO2 weight ratios were 5/0, 2/3, 3/2 and 0/5 (phr/phr). The Young’s modulus and thermal stability of the nanocomposites were all higher than those of the neat 70/30 PLA/TPU blend, but at the expense of reducing the tensile strength, elongation at break and impact strength. However, all the nanocomposites exhibited higher impact strength and Young’s modulus than the neat PLA. Among the four nanocomposites, a single-filler nanocomposite containing 5 phr nSiO2 exhibited the highest impact strength and thermal stability, indicating that there was no synergistic effect of the two nanofillers on the investigated physical properties. However, the hybrid nanocomposite containing 2/3 (phr/phr) OMMT/nSiO2 possessed a compromise in the tensile properties.

Thermal Stability of Mechanical Properties of Copper after Equal-Channel Angular Pressing

2008 ◽  
Vol 584-586 ◽  
pp. 960-965 ◽  
Author(s):  
Tamara Kravchenko ◽  
Alexander Korshunov ◽  
Natalia Zhdanova ◽  
Lev Polyakov ◽  
Irina Kaganova
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Tensile Strength ◽  
Chemical Composition ◽  
Yield Strength ◽  
Equal Channel Angular Pressing ◽  
Angular Pressing ◽  
Different Temperatures ◽  
Thermal Stability Of

Annealed oxygen-free and tough-pitch copper samples have been processed by equalchannel angular pressing (ECAP) by route BC. The samples included 8 x 8 mm section pieces and a 40 mm diameter bar. Thermal stability was assessed based on the changes in the standard mechanical properties (conventional yield strength, tensile strength, elongation, proportional elongation and contraction) after annealing at different temperatures for 1 hour. Thermal stability of the same grade of material has been found to be different for different batches and to depend on the structural conditions of deformed material. The zone of thermal stability for copper of the two grades of interest does not depend on the material’s chemical composition.

scholarly journals Hybrid Composites Based on Polypropylene with Basalt/Hazelnut Shell Fillers: The Influence of Temperature, Thermal Aging, and Water Absorption on Mechanical Properties

Polymers ◽  
2019 ◽  
Vol 12 (1) ◽  
pp. 18 ◽  
Author(s):  
Anna Kufel ◽  
Stanisław Kuciel
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Water Absorption ◽  
Thermal Aging ◽  
Hybrid Composites ◽  
Coefficient Of Thermal Expansion ◽  
Tensile Modulus ◽  
Charpy Impact ◽  
Creep Tests ◽  
Influence Of Temperature

The aim of the research was to study the effects of adding natural fillers to a polypropylene (PP) matrix on mechanical and physical properties of hybrid composites. The 10%, 15%, and 20% by weight basalt fibers (BF) and ground hazelnut shells (HS) were added to the PP matrix. Composites were produced by making use of an injection molding method. Tensile strength, tensile modulus, strain at break, Charpy impact strength, and the coefficient of thermal expansion were determined. The influence of temperature, thermal aging, and water absorption on mechanical properties was also investigated. In addition, short-time creep tests were carried out. To characterize the morphology and the filler distribution within the matrix, a scanning electron microscope (SEM) was used. The results showed that the addition of the two types of filler enhanced mechanical properties. Furthermore, improvements in thermal stability were monitored. After water absorption, the changes in the tensile properties of the tested composites were moderate. However, thermal aging caused a decrease in tensile strength and tensile modulus.

Sign in / Sign up

Export Citation Format

Share Document