Investigation of nickel ammonia phosphate with different morphologies as a new high-efficiency flame retardant for epoxy resin

2019 ◽  
Vol 32 (4) ◽  
pp. 359-370 ◽  
Author(s):  
Weiwei Zhang ◽  
Hongjuan Wu ◽  
Weihua Meng ◽  
Jiahe Li ◽  
Yumeng Cui ◽  
...  
Keyword(s):  
Flame Retardant ◽  
Epoxy Resin ◽  
Flame Retardancy ◽  
Photoelectron Spectroscopy ◽  
High Efficiency ◽  
Ammonium Phosphate ◽  
Cone Calorimetry ◽  
Limiting Oxygen Index ◽  
X Ray ◽  
The Matrix

Nanowires, nanosheets, and microflowers of nickel ammonium phosphate (NiNH4PO4·H2O) were synthesized by a mixed solvothermal method and used to improve the flame retardancy of epoxy resin (EP). The solvent concentration and surfactant content were found to play a key role in nucleation and growth of NiNH4PO4·H2O. The structure of NiNH4PO4·H2O was characterized by X-ray diffraction and X-ray photoelectron spectroscopy. The flame retardancy, thermostability, mechanical properties, and flame retardancy mechanism of EP/NiNH4PO4·H2O composites were analyzed using the limiting oxygen index (LOI), cone calorimetry (Cone), mechanical property tests, thermogravimetric analysis, and thermogravimetric–Fourier transform infrared spectroscopy. The results indicated that NiNH4PO4·H2O has proper thermal stability and greatly improves the flame retardancy of EP. The nanosheets outperformed the other morphologies; the EP/5% NiNH4PO4·H2O nanosheets have an LOI of 35.2%, which exceeds that of pure EP (24.7%). Furthermore, Cone showed that these nanosheets have the lowest peak heat release rate and peak smoke production rate, which are 69.1% and 36.5% lower than those of pure EP, respectively. NiNH4PO4·H2O can promote the formation of a stable char layer and release nonflammable gases, thus protecting the matrix by preventing heat and oxygen transfer and reducing the concentration of combustible gas. NiNH4PO4·H2O is expected to serve as a new high-efficiency flame retardant for EP.

scholarly journals A Novel POSS-Based Copolymer Functionalized Graphene: An Effective Flame Retardant for Reducing the Flammability of Epoxy Resin

Polymers ◽  
2019 ◽  
Vol 11 (2) ◽  
pp. 241 ◽  
Author(s):  
Min Li ◽  
Hong Zhang ◽  
Wenqian Wu ◽  
Meng Li ◽  
Yiting Xu ◽  
...  
Keyword(s):  
Flame Retardant ◽  
Epoxy Resin ◽  
Photoelectron Spectroscopy ◽  
Diglycidyl Ether ◽  
Functionalized Graphene ◽  
Functionalized Graphene Oxide ◽  
Limiting Oxygen Index ◽  
X Ray ◽  
Grafting Reaction ◽  
Trade Name

In this study, a novel copolymer, PbisDOPOMA-POSSMA-GMA (PDPG), containing methacryloisobutyl polyhedral oligomeric silsesquioxane (POSSMA), reactive glycidyl methacrylate (GMA), and bis-9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide methacrylate (bisDOPOMA) and derivative functionalized graphene oxide (GO) were synthesized by a one-step grafting reaction to create a hybrid flame retardant (GO-MD-MP). GO-MD-MP was characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), transmission electron microscopy (TEM), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and thermogravimetric analysis (TGA). Flame-retardant epoxy resin (EP) composites were prepared by adding various amounts of GO-MD-MP to the thermal-curing epoxy resin of diglycidyl ether of bisphenol A (DGEBA, trade name E-51). The thermal properties of the EP composites were remarkably enhanced by adding the GO-MD-MP, and the residue char of the epoxy resin also increased greatly. With the incorporation of 4 wt % GO-MD-MP, the limiting oxygen index (LOI) value was enhanced to 31.1% and the UL-94 V-0 rating was easily achieved. In addition, the mechanical strength of the epoxy resin was also improved.

scholarly journals Preparation and properties of flame-retardant epoxy resins containing reactive phosphorus flame retardant

2020 ◽  
Vol 15 ◽  
pp. 155892502090132
Author(s):  
Sang-Hoon Lee ◽  
Seung-Won Oh ◽  
Young-Hee Lee ◽  
Il-Jin Kim ◽  
Dong-Jin Lee ◽  
...  
Keyword(s):  
Impact Strength ◽  
Flame Retardant ◽  
Epoxy Resin ◽  
Flame Retardancy ◽  
Epoxy Resins ◽  
Phosphorus Content ◽  
Phosphorus Compound ◽  
Phosphorus Compounds ◽  
Limiting Oxygen Index ◽  
The Impact

To prepare flame-retardant epoxy resin, phosphorus compound containing di-hydroxyl group (10-(2,5-dihydroxyphenyl)-9,10-dihydro-9-oxa-10-phospha phenanthrene-10-oxide, DOPO-HQ) was reacted with uncured epoxy resin (diglycidyl ether of bisphenol A, YD-128) and then cured using a curing agent (dicyandiamide, DICY). This study focused on the effect of phosphorus compound/phosphorus content on physical properties and flame retardancy of cured epoxy resin. The thermal decomposition temperature of the cured epoxy resins (samples: P0, P1.5, P2.0, and P2.5, the number represents the wt% of phosphorus) increased with increasing the content of phosphorus compound/phosphorus (0/0, 19.8/1.5, 27.8/2.0, and 36.8/2.5 wt%) based on epoxy resin. The impact strength of the cured epoxy resin increased significantly with increasing phosphorus compound content. As the phosphorus compound/phosphorus content increased from 0/0 to 36.8/2.5 wt%, the glass transition temperature (the peak temperature of loss modulus curve) increased from 135.2°C to 142.0°C. In addition, as the content of phosphorous compound increased, the storage modulus remained almost constant up to higher temperature. The limiting oxygen index value of cured epoxy resin increased from 21.1% to 30.0% with increasing phosphorus compound/phosphorus content from 0/0 to 36.8/2.5 wt%. The UL 94 V test result showed that no rating for phosphorus compounds less than 19.8 wt% and V-1 for 27.8 wt%. However, when the phosphorus compound was 36.8 wt%, the V-0 level indicating complete flame retardancy was obtained. In conclusion, the incorporation of phosphorus compounds into the epoxy chain resulted in improved properties such as impact strength and heat resistance, as well as a significant increase in flame retardancy.

scholarly journals Effects of Combining Graphene Nanoplatelet and Phosphorous Flame Retardant as Additives on Mechanical Properties and Flame Retardancy of Epoxy Nanocomposite

Polymers ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2349
Author(s):  
Woranan Netkueakul ◽  
Beatrice Fischer ◽  
Christian Walder ◽  
Frank Nüesch ◽  
Marcel Rees ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Flame Retardant ◽  
Epoxy Resin ◽  
Flame Retardancy ◽  
Crosslinking Density ◽  
Milling Process ◽  
Structure Property ◽  
Cone Calorimetry ◽  
Graphene Nanoplatelet ◽  
Phosphorous Flame Retardant

The effects of combining 0.1–5 wt % graphene nanoplatelet (GNP) and 3–30 wt % phosphorous flame retardant, 9,10- dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) as fillers in epoxy polymer on the mechanical, flame retardancy, and electrical properties of the epoxy nanocomposites was investigated. GNP was homogeneously dispersed into the epoxy matrix using a solvent-free three-roll milling process, while DOPO was incorporated into the epoxy resin by mechanical stirring at elevated temperature. The incorporation of DOPO reduced the crosslinking density of the epoxy resin. When using polyetheramine as a hardener, the structural rigidity effect of DOPO overshadowed the crosslinking effect and governed the flexural moduli of epoxy/DOPO resins. The flexural moduli of the nanocomposites were improved by adding GNP up to 5 wt % and DOPO up to 30 wt %, whereas the flexural strengths deteriorated when the GNP and DOPO loading were higher than 1 wt % and 10 wt %, respectively. Limited by the adverse effects on mechanical property, the loading combinations of GNP and DOPO within the range of 0–1 wt % and 0–10 wt %, respectively, in epoxy resin were further studied. Flame retardancy index (FRI), which depended on three parameters obtained from cone calorimetry, was considered to evaluate the flame retardancy of the epoxy composites. DOPO showed better performance than GNP as the flame retardant additive, while combining DOPO and GNP could further improve FRI to some extent. With the combination of 0.5 wt % GNP and 10 wt % DOPO, improvement in both mechanical properties and flame retardant efficiency of the nanocomposite was observed. Such a combination did not affect the electrical conductivity of the nanocomposites since the percolation threshold was at 1.6 wt % GNP. Our results enhance the understanding of the structure–property relationship of additive-filled epoxy resin composites and serve as a property constraining guidance for the composite manufacturing.

Flammability and thermal properties of cotton fabrics modified with a novel flame retardant containing triazine and phosphorus components

2016 ◽  
Vol 87 (11) ◽  
pp. 1367-1376 ◽  
Author(s):  
Chaohong Dong ◽  
Zhou Lu ◽  
Peng Wang ◽  
Ping Zhu ◽  
Xuechao Li ◽  
...  
Keyword(s):  
Heat Release ◽  
Flame Retardant ◽  
Cotton Fabric ◽  
Flame Retardancy ◽  
Decomposition Temperature ◽  
Cotton Fabrics ◽  
Cone Calorimetry ◽  
Limiting Oxygen Index ◽  
Untreated Cotton ◽  
Index Value

A novel formaldehyde-free flame retardant containing phosphorus and dichlorotriazine components (CTAP) for cotton fabrics was synthesized. As an active group, the dichlorotriazine could react with cotton fabric via covalent reaction. The addition of 20.7 wt% CTAP into the cotton fabric obtained a high limiting oxygen index value of 31.5%, which was 13.5% higher than the pure cotton fabric. The results of heat release rate, total heat release and effective heat combustion indicated that CTAP effectively imparted flame retardancy to cotton fabric by the cone calorimetry test. With respect to the untreated cotton fabrics, the treated cotton fabrics degraded at lower decomposition temperature and form a consistent and compact char layer, which could be observed by thermogravimetric analysis, Fourier transform infrared spectroscopy and scanning electron microscopy. Compared to the untreated cotton fabrics, CTAP performed an effective role in flame retardancy for treated cotton fabrics. Meanwhile, it stimulated the formation of char and promoted the thermal stability of treated cotton fabrics during combustion.

scholarly journals Preparation and Test of UV Resistant and Flame Retardant Cotton Fabric With Phytic Acid, Tannic Acid and Diethylenetriamine as Raw Materials

2021 ◽  
Author(s):  
Xiang Zhou ◽  
Yankun Yin ◽  
Zhiyu Huang ◽  
Lu Fu ◽  
Shaohua Chen ◽  
...  
Keyword(s):  
Flame Retardant ◽  
Phytic Acid ◽  
Cotton Fabric ◽  
Tannic Acid ◽  
Photoelectron Spectroscopy ◽  
Raw Materials ◽  
Cone Calorimetry ◽  
Limiting Oxygen Index ◽  
Ultraviolet Resistance ◽  
Ultraviolet Protection

Abstract Although cotton fabric is widely used in various fields because of its unique advantages, it has the disadvantages of flammability and poor ultraviolet protection. By combining diethylenetriamine(DETA)、phytic acid (PA) and tannic acid(TA) on cotton fabric, a chemical reaction intumescent flame retardant cotton fabric with anti-ultraviolet and anti-flame retardant was developed. The flame retardant and ultraviolet resistance of cotton fabric were characterized by limiting oxygen index (LOI) test, vertical combustion test, cone calorimetry test and ultraviolet resistance test. Scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR) and other tests were used to analyze the chemical composition, surface morphology and residual carbon after combustion of the cotton fabric, and it was confirmed that the modified cotton fabric has good ultraviolet resistance and flame retardant performance. In this study, an eco-friendly cotton fabric treatment method was proposed, which made cotton fabric have anti-ultraviolet and flame retardant properties, and a new application of tannic acid and phytic acid in ultraviolet protection and flame retardant of fabric was put forward.

scholarly journals Synergistic Flame Retardant Effect of Barium Phytate and Intumescent Flame Retardant for Epoxy Resin

Polymers ◽  
2021 ◽  
Vol 13 (17) ◽  
pp. 2900
Author(s):  
Linyuan Wang ◽  
Yue Wei ◽  
Hongbo Deng ◽  
Ruiqi Lyu ◽  
Jiajie Zhu ◽  
...  
Keyword(s):  
Flame Retardant ◽  
Epoxy Resin ◽  
Flame Retardancy ◽  
Barium Carbonate ◽  
Environmentally Friendly ◽  
Intumescent Flame Retardant ◽  
Limiting Oxygen Index ◽  
Application Range ◽  
Peak Heat Release Rate ◽  
Synergistic Flame Retardant

Recently, widespread concern has been aroused on environmentally friendly materials. In this article, barium phytate (Pa-Ba) was prepared by the reaction of phytic acid with barium carbonate in deionized water, which was used to blend with intumescent flame retardant (IFR) as a flame retardant and was added to epoxy resin (EP). Afterward, the chemical structure and thermal stability of Pa-Ba were characterized by Fourier transform infrared (FTIR) spectroscopy and thermogravimetric analysis (TGA), respectively. On this basis, the flammability and flame retardancy of EP composites were researched. It is shown that EP/14IFR/2Ba composite has the highest limiting oxygen index (LOI) value of 30.7%. Moreover, the peak heat release rate (PHRR) of EP/14IFR/2Ba decreases by 69.13% compared with pure EP. SEM and Raman spectra reveal the carbonization quality of EP/14IFR/2Ba is better than that of other composites. The results prove that Pa-Ba can cooperate with IFR to improve the flame retardancy of EP, reducing the addition amount of IFR in EP, thus expanding the application range of EP. In conclusion, adding Pa-Ba to IFR is a more environmentally friendly and efficient method compared with others.

Preparation of lignin–silica hybrids and its application in intumescent flame-retardant poly(lactic acid) system

2012 ◽  
Vol 24 (8) ◽  
pp. 738-746 ◽  
Author(s):  
Rui Zhang ◽  
Xifu Xiao ◽  
Qilong Tai ◽  
Hua Huang ◽  
Jian Yang ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Lactic Acid ◽  
Flame Retardant ◽  
Flame Retardancy ◽  
Photoelectron Spectroscopy ◽  
Intumescent Flame Retardant ◽  
Poly Lactic Acid ◽  
Limiting Oxygen Index ◽  
Silica Hybrids ◽  
Thermal Stability Of

Lignin–silica hybrids (LSHs) were prepared by sol–gel method and characterized by Fourier transform infrared (FT-IR) spectra, X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). LSH and ammonium polyphosphate (APP) were added into poly(lactic acid) (PLA) as a novel intumescent flame-retardant (IFR) system to improve the flame retardancy of PLA. The flame-retardant effect of APP and LSH in PLA was studied using limiting oxygen index (LOI), vertical burning (UL-94) tests and cone calorimeter. The thermal stability of PLA/APP/LSH composites was evaluated by thermogravimetric analysis (TGA). Additionally, the morphology and components of char residues of the IFR-PLA composites were investigated by SEM and XPS. With the addition of APP/LSH to PLA system, the morphology of the char residue has obviously changed. Compared with PLA/APP and PLA/APP/lignin, a continuous and dense intumescent charring layer with more phosphor in PLA composites is formed, which exhibits better flame retardancy. All the results show that the combination of APP and LSH can improve the flame-retardant property and increase the thermal stability of PLA composites greatly.

scholarly journals Novel Dihydroxy-Containing Ammonium Phosphate Based Poly(Lactic Acid): Synthesis, Characterization and Flame Retardancy

Polymers ◽  
2018 ◽  
Vol 10 (8) ◽  
pp. 871 ◽  
Author(s):  
Rong-Kun Jian ◽  
Long Xia ◽  
Yuan-Fang Ai ◽  
De-Yi Wang
Keyword(s):  
Lactic Acid ◽  
Flame Retardant ◽  
Ammonium Phosphate ◽  
Acid Synthesis ◽  
Poly Lactic Acid ◽  
Limiting Oxygen Index ◽  
Phosphorus Containing ◽  
The Matrix ◽  
Degree Of Crystallization ◽  
Thermal Stability Of

The aim of this work is to prepare flame-retardant biobased poly(lactic acid) materials through incorporating a novel flame retardant dihydroxy-containing ammonium phosphate (DAP) derived from 2-chloro-5,5-dimethyl-1,3,2-dioxaphosphinane-2-oxide (DOP) and 2-amino-2-methyl-1,3-propanediol (AMPD). Interestingly, PLA modified with only 0.5% DAP passed UL-94 V-0 rating, and possessed a limiting oxygen index (LOI) value of 24.6%, which would further increase with the increasing loading of DAP. PLA/DAP did not exhibit obviously improved results in terms of heat release rate (HRR), as the loading of DAP was relatively low. It was found that DAP showed little effect on the thermal stability of PLA and the onset decomposition temperatures of PLA and PLA/DAP blends were very close. Besides, the degree of crystallization increased because of the plasticized effect of DAP. Based on the analyses of flame-retardant mechanism of DAP, it disclosed that DAP decomposed to generate incombustible compounds, such as water and ammonia, to dilute the concentration of oxygen and fuels, and then release some phosphorus-containing fragments that could produce phosphorus-containing free radicals to interrupt free-radical reactions, and finally noncombustible melt dripping was produced so as to bring away large amount of heat and stop the feedback of heat to the matrix.

scholarly journals Flame Retardant Polypropylenes: A Review

Polymers ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 1701 ◽  
Author(s):  
Farzad Seidi ◽  
Elnaz Movahedifar ◽  
Ghasem Naderi ◽  
Vahideh Akbari ◽  
Franck Ducos ◽  
...  
Keyword(s):  
Flame Retardant ◽  
Flame Retardancy ◽  
Flame Retardants ◽  
Cone Calorimetry ◽  
Research Papers ◽  
Limiting Oxygen Index ◽  
Wide Range ◽  
Pp Composites ◽  
Calorimetry Data

Polypropylene (PP) is a commodity plastic known for high rigidity and crystallinity, which is suitable for a wide range of applications. However, high flammability of PP has always been noticed by users as a constraint; therefore, a variety of additives has been examined to make PP flame-retardant. In this work, research papers on the flame retardancy of PP have been comprehensively reviewed, classified in terms of flame retardancy, and evaluated based on the universal dimensionless criterion of Flame Retardancy Index (FRI). The classification of additives of well-known families, i.e., phosphorus-based, nitrogen-based, mineral, carbon-based, bio-based, and hybrid flame retardants composed of two or more additives, was reflected in FRI mirror calculated from cone calorimetry data, whatever heat flux and sample thickness in a given series of samples. PP composites were categorized in terms of flame retardancy performance as Poor, Good, or Excellent cases. It also attempted to correlate other criteria like UL-94 and limiting oxygen index (LOI) with FRI values, giving a broad view of flame retardancy performance of PP composites. The collected data and the conclusions presented in this survey should help researchers working in the field to select the best additives among possibilities for making the PP sufficiently flame-retardant for advanced applications.

Synthesis of a Flame Retardant and Hydrophobic Epoxy Resin with Multiple Elements Synergistic Effect for Tunnel Seepage Prevention Application

2020 ◽  
Vol 842 ◽  
pp. 314-325
Author(s):  
Bin Lin
Keyword(s):  
Flame Retardant ◽  
Epoxy Resin ◽  
Flame Retardancy ◽  
Oxygen Index ◽  
Fire Retardant ◽  
Practical Application ◽  
Water Contact ◽  
Limiting Oxygen Index ◽  
New Perspective ◽  
Grouting Materials

Epoxy resin (EP) mortar usually used to repair the cracking of concrete structure under damp environment, but EP is extremely flammable, thus it’s extremely imperative to design a novel multifunction EP grouting materials with flame retardancy and waterproofness for the practical application. Targeting ingenious decoration of EP grouting materials, multiple flame retardant elements (phosphorus, nitrogen and fluorine) are concurrently introduced into a fire retardant and the fire retardant defined as DDM-FNP. The obtained DDM-FNP/EP grouting composite possess high thermal stability, flame retardancy and hydrophobicity. The limiting oxygen index (LOI) value of DDM-FNP/EP composites has a significant improve, which is increased from 26.7 (EP-0) to 35.8 (EP-4). Composites with more than 10 wt% of DDM-FNP could pass UL-94 V-0 rating without dripping. Compared with EP-0, the PHRR and THR of EP-4 are decreased by 31.1% and 21.6%, respectively. In addition, due to the introduction of the F element, the water contact angle of EP composites is changed from 75.2° (hydrophilicity) to 98.6° (hydrophobicity) after the introduction of a certain amount of DDM-FNP flame retardant. Therefore, this work provide a new perspective to design a multifunction EP grouting composite and improve the value of practical application on seepage prevention of tunnel.

Sign in / Sign up

Export Citation Format

Share Document