Combined stiffness characteristic of metal rubber material under vibration loads

2019 ◽  
Vol 233 (17) ◽  
pp. 6076-6088 ◽  
Author(s):  
Hailong Fu ◽  
Zhengli Hua ◽  
Longqing Zou ◽  
Yue Wang ◽  
Jianbin Ye
Keyword(s):  
Energy Dissipation ◽  
Vibration Isolation ◽  
Influence Factors ◽  
Experimental Tests ◽  
Individual Element ◽  
Rubber Material ◽  
Static Tests ◽  
Metal Rubber ◽  
Vibration Loads ◽  
The Individual

Metal rubber is one kind of elastic cellular metal material, which is widely used in vibration isolation environment for its excellent properties of elasticity, energy dissipation, and environmental adaptability. However, the stiffness range of one single metal rubber is restricted, which limits its ability of vibration isolation, especially under the complex vibration loads. In this paper, a method of spatial overlay combination is presented to widen the range of the stiffness of metal rubber material. The contact behavior of the metal spiral rolls and the influence factors of manufacture to the stiffness are investigated according to the micro-spring theory and the energy dissipation theory. The static tests under cycling loading are conducted to obtain the average stiffness and the equivalent stiffness of the combined metal rubber. After the comparisons, the combined metal rubber has a better stiffness range than the individual element. The diameter of metal wire and the relative density of metal rubber are two important influence factors to the combined stiffness, which are verified by the experimental tests and finite element simulation.

Multistable Cosine-Curved Dome System for Elastic Energy Dissipation

2019 ◽  
Vol 86 (9) ◽  
Author(s):  
Mansour Alturki ◽  
Rigoberto Burgueño
Keyword(s):  
Energy Dissipation ◽  
Analytical Model ◽  
Nonlinear Behavior ◽  
Experimental Tests ◽  
High Energy ◽  
Bistable System ◽  
Dissipated Energy ◽  
Element Analysis ◽  
The Individual ◽  
Hysteretic Response

This paper presents a new energy dissipation system composed of multistable cosine-curved domes (CCD) connected in series. The system exhibits multiple consecutive snap-through and snap-back buckling behavior with a hysteretic response. The response of the CCDs is within the elastic regime and hence the system's original configuration is fully recoverable. Numerical studies and experimental tests were conducted on the geometric properties of the individual CCD units and their number in the system to examine the force–displacement and energy dissipation characteristics. Finite element analysis (FEA) was performed to simulate the response of the system to develop a multilinear analytical model for the hysteretic response that considers the nonlinear behavior of the system. The model was used to study the energy dissipation characteristics of the system. Experimental tests on 3D printed specimens were conducted to analyze the system and validate numerical results. Results show that the energy dissipation mainly depends on the number and the apex height-to-thickness ratio of the CCD units. The developed multilinear analytical model yields conservative yet accurate values for the dissipated energy of the system. The proposed system offered reliable high energy dissipation with a maximum loss factor value of 0.14 for a monostable (self-recoverable) system and higher for a bistable system.

scholarly journals A simulation strategy to determine the mechanical behaviour of cork-rubber composite pads for vibration isolation

2021 ◽  
Vol 24 (1) ◽  
pp. 80-88
Author(s):  
Helena Lopes ◽  
Susana P. Silva ◽  
José Machado
Keyword(s):  
Regression Models ◽  
Vibration Isolation ◽  
Dynamic Stiffness ◽  
Experimental Tests ◽  
Compression Modulus ◽  
Element Analysis ◽  
Rubber Material ◽  
Rubber Compounds ◽  
Simulation Strategy ◽  
Mathematical Techniques

The present work aimed to determine the performance of new cork-rubber composites, applying a modelling-based approach. The static and dynamic behaviour under compression of new composite isolation pads was determined using mathematical techniques. Linear regression was used to estimate apparent compression modulus and dynamic stiffness coefficient of compounds samples based on the effect of fillers, cork and other ingredients. Using the results obtained by regression models, finite element analysis (FEA) was applied to determine the behaviour of the same cork-rubber material but considering samples with different dimensions. The majority of the regression models presented R2 values above 90%. Also, a good agreement was found between the results obtained by the presented approach and previous experimental tests. Based on the developed methodology, the compression behaviour of new cork-rubber compounds can be accessed, improving product development stages.

Static and dynamic response of sandwich beams with lattice and pantographic cores

2021 ◽  
pp. 109963622110338
Author(s):  
Yury Solyaev ◽  
Arseniy Babaytsev ◽  
Anastasia Ustenko ◽  
Andrey Ripetskiy ◽  
Alexander Volkov
Keyword(s):  
Mechanical Performance ◽  
Lattice Structure ◽  
Unit Length ◽  
Experimental Tests ◽  
Plane Geometry ◽  
Sandwich Beams ◽  
Static Tests ◽  
Three Point Bending ◽  
The Core ◽  
The Impact

Mechanical performance of 3d-printed polyamide sandwich beams with different type of the lattice cores is investigated. Four variants of the beams are considered, which differ in the type of connections between the elements in the lattice structure of the core. We consider the pantographic-type lattices formed by the two families of inclined beams placed with small offset and connected by stiff joints (variant 1), by hinges (variant 2) and made without joints (variant 3). The fourth type of the core has the standard plane geometry formed by the intersected beams lying in the same plane (variant 4). Experimental tests were performed for the localized indentation loading according to the three-point bending scheme with small span-to-thickness ratio. From the experiments we found that the plane geometry of variant 4 has the highest rigidity and the highest load bearing capacity in the static tests. However, other three variants of the pantographic-type cores (1–3) demonstrate the better performance under the impact loading. The impact strength of such structures are in 3.5–5 times higher than those one of variant 4 with almost the same mass per unit length. This result is validated by using numerical simulations and explained by the decrease of the stress concentration and the stress state triaxiality and also by the delocalization effects that arise in the pantographic-type cores.

scholarly journals Material parametrization of natural rubber based compound and characterization of crack propagation under consideration of dissipative effects

2021 ◽  
Author(s):  
Dan Pornhagen ◽  
Konrad Schneider ◽  
Markus Stommel
Keyword(s):  
Energy Dissipation ◽  
Crack Propagation ◽  
Natural Rubber ◽  
Experimental Tests ◽  
Material Behavior ◽  
Prony Series ◽  
Material Forces ◽  
Cracking Behavior ◽  
Dissipative Effects

AbstractMost concepts to characterize crack propagation were developed for elastic materials. When applying these methods to elastomers, the question is how the inherent energy dissipation of the material affects the cracking behavior. This contribution presents a numerical analysis of crack growth in natural rubber taking energy dissipation due to the visco-elastic material behavior into account. For this purpose, experimental tests were first carried out under different load conditions to parameterize a Prony series as well as a Bergström–Boyce model with the results. The parameterized Prony series was then used to perform numerical investigations with respect to the cracking behavior. Using the FE-software system ANSYS and the concept of material forces, the influence and proportion of the dissipative components were discussed.

scholarly journals The Chosen Aspects of Skew Rolling of Hollow Stepped Shafts

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 764
Author(s):  
Jarosław Bartnicki ◽  
Yingxiang Xia ◽  
Xuedao Shu
Keyword(s):  
Cross Section ◽  
Rolling Mill ◽  
Metal Flow ◽  
Experimental Tests ◽  
Rolling Process ◽  
Numerical Control ◽  
Technological Parameters ◽  
Flow Mechanisms ◽  
The Individual ◽  
Skew Rolling

The paper presents chosen aspects of the skew rolling process of hollow stepped products with the use of a skew rolling mill designed and manufactured at the Lublin University of Technology. This machine is characterized by the numerical control of spacing between the working rolls and the sequence of the gripper axial movement, which allows for the individual programming of the obtained shapes of parts such as stepped axles and shafts. The length of these zones and the values of possibly realizable cross-section reduction and obtained outlines are the subject of this research paper. The chosen results regarding the influence of the technological parameters used on the course of the process are shown in the present study. Numerical modelling using the finite element method in Simufact Forming, as well as the results of experimental tests performed in a skew rolling mill, were applied in the conducted research. The work takes into account the influence of cross-section reduction of the hollow parts and the feed rate per rotation on the metal flow mechanisms in the skew rolling process. The presented results concern the obtained dimensional deviations and changes in the wall thickness determining the proper choice of technological parameters for hollow parts formed by the skew rolling method. Knowledge about the cause of the occurrence of these limitations is very important for the development of this technology and the choice of the process parameters.

scholarly journals Effect of Bottom Geometry on the Natural Sloshing Motion of Water Inside Tanks: An Experimental Analysis

2021 ◽  
Vol 11 (2) ◽  
pp. 605
Author(s):  
Antonio Agresta ◽  
Nicola Cavalagli ◽  
Chiara Biscarini ◽  
Filippo Ubertini
Keyword(s):  
Energy Dissipation ◽  
Water Depth ◽  
Shear Force ◽  
Experimental Tests ◽  
Shear Load ◽  
Damping Properties ◽  
Base Shear ◽  
Structure Interaction ◽  
Sloshing Phenomenon ◽  
Key Aspects

The present work aims at understanding and modelling some key aspects of the sloshing phenomenon, related to the motion of water inside a container and its effects on the substructure. In particular, the attention is focused on the effects of bottom shapes (flat, sloped and circular) and water depth ratio on the natural sloshing frequencies and damping properties of the inner fluid. To this aim, a series of experimental tests has been carried out on tanks characterised by different bottom shapes installed over a sliding table equipped with a shear load cell for the measurement of the dynamic base shear force. The results are useful for optimising the geometric characteristics of the tank and the fluid mass in order to obtain enhanced energy dissipation performances by exploiting fluid–structure interaction effects.

Experimental study on seismic performance of suspended ceiling components

2021 ◽  
Author(s):  
Yong Wang ◽  
Huanjun Jiang ◽  
Chen Wu ◽  
Zihui Xu ◽  
Zhiyuan Qin
Keyword(s):  
Experimental Study ◽  
Energy Dissipation ◽  
Seismic Performance ◽  
Seismic Vulnerability ◽  
Axial Loading ◽  
Deformation Capacity ◽  
Severe Damage ◽  
Strong Earthquakes ◽  
Static Tests ◽  
Load Carrying

<p>Suspended ceiling systems (SCSs) experienced severe damage during strong earthquakes that occurred in recent years. The capacity of the ceiling component is a crucial factor affecting the seismic performance of SCS. Therefore, a series of static tests on suspended ceiling components under monotonic and cyclic loadings were carried out to investigate the seismic performance of the ceiling components. The ceiling components include main tee splices, cross tee latches and peripheral attachments. All specimens were tested under axial loading. Additionally, the static tests of cross tee latches subjected to shear and bending loadings were performed due to their seismic vulnerability. The failure pattern, load-carrying ability, deformation capacity and energy dissipation of the ceiling components are presented in detail in this study.</p>

The Experimental Research of Vibration Isolation Performance of MR Isolator at High Temperature

2012 ◽  
Vol 184-185 ◽  
pp. 525-528 ◽  
Author(s):  
Hui Yan ◽  
Liang Chen ◽  
Hong Rui Ao ◽  
Hong Yuan Jiang
Keyword(s):  
Vibration Isolation ◽  
Evaluation Index ◽  
Structural Parameter ◽  
Sweep Frequency ◽  
Frequency Test ◽  
Metal Rubber ◽  
Performance Evaluation Index ◽  
Vibration Isolation Performance ◽  
Isolation Performance ◽  
Sine Sweep

Transmissibility is the main performance evaluation index of Metal Rubber (MR) isolator, which can be got by sine sweep frequency test. At different temperature, the sine sweep frequency test is done with different structural parameter MR isolator. The influence that relative density and pre-deformation have on transmissibility and natural frequency when temperature changed is analyzed. The changing regularity of MR isolator’s transmissibility at different temperature is explored. Research results provide the basis for designing MR isolator.

Fatigue Damage Character of Metal Rubber Material

2012 ◽  
Vol 457-458 ◽  
pp. 1159-1162
Author(s):  
Yu Ming Li ◽  
Hong Bai Bai ◽  
Jian Chun Yang
Keyword(s):  
Fatigue Damage ◽  
Rubber Material ◽  
Metal Rubber

scholarly journals Design and Experiments of a Piezoelectric Motor Using Three Rotating Mode Actuators

Sensors ◽  
2019 ◽  
Vol 19 (23) ◽  
pp. 5184 ◽  
Author(s):  
Roland Ryndzionek ◽  
Łukasz Sienkiewicz ◽  
Michał Michna ◽  
Filip Kutt
Keyword(s):  
Numerical Analysis ◽  
Traveling Wave ◽  
Laser Interferometry ◽  
Experimental Tests ◽  
Impedance Analysis ◽  
Piezoelectric Motor ◽  
Resonant Frequencies ◽  
Rotary Motors ◽  
The Individual ◽  
Geometrical Dimensions

This paper represents a numerical and experimental investigation of the multicell piezoelectric motor. The proposed design consists of three individual cells that are integrated into the stator, double rotor, and a preload system combined into a symmetrical structure of the motor. Each of the cells is characterized by a traveling wave and rotating mode motor. A finite element numerical analysis is carried out to obtain optimal geometrical dimensions of the individual cell in terms of generated vibrations and resonant frequencies of the structure. The results of the numerical analysis are compared with analytical calculations based on the equivalent circuit theory. Experimental tests are also presented, including laser interferometry measurements of vibrations generated at the surface of the stator, impedance analysis, as well as measurements of mechanical characteristics of the complete motor. The final stage of the study concludes that the presented motor can provide relatively high torque compared with other traveling wave rotary motors.

Sign in / Sign up

Export Citation Format

Share Document