scholarly journals Study on Deterioration Characteristics and Fracturing Mechanism of Concrete Under Liquid Nitrogen Cold Shock

2021 ◽  
Vol 15 (1) ◽  
Author(s):  
Jialiang Liu ◽  
Yu Jin ◽  
Yujie Zhu ◽  
Jinyang Li ◽  
Xuguang Zhang ◽  
...  
Keyword(s):  
Liquid Nitrogen ◽  
Cold Shock ◽  
Specific Energy Consumption ◽  
Water Jet ◽  
Energy Utilization ◽  
Utilization Rate ◽  
Systematic Research ◽  
High Threshold ◽  
Cycle Number ◽  
Pump Pressure

AbstractHigh-pressure water jet crushing concrete has significant advantages in safety, quality and environmental protection, which has a broad application prospect in the maintenance and reconstruction of concrete building. Nevertheless, it still has some problems such as high threshold pump pressure and large specific energy consumption. Water jet breaking concrete with liquid nitrogen (LN2) cold shock assistance combined with the low-temperature-induced fracturing and hydraulic impact can effectively reduce the working pressure of water jet and improve the energy utilization rate. On account of the unclear cracking characteristics and mechanism of concrete under the LN2 cold shock, this research carried out the following systematic research focusing on the key scientific issues above based on mechanical tests, scanning electron microscopy (SEM), and nuclear magnetic resonance (NMR). Results indicate that the total mass of concrete exfoliated blocks after compression failure increases as the LN2 cold shock time and the number of shock cycles goes up, and the uniaxial compressive strength decreases from 8.27 to 21.96%. Through SEM and NMR analysis, it is found that LN2 cold shock can cause more micro-cracks to develop inside the concrete, and the pore development increases as the cold shock time and the cycle number increase. Additionally, under the condition of water jet pump pressure of 150 MPa, the maximum width and depth of crater for cold shock of 5 min increase by 41.79% and 20.48%, respectively, and those for cold shock of 10 min increase by 76.72% and 40.43%, respectively, compared with the original sample.

scholarly journals Integrated Double-Sided Random Microlens Array Used for Laser Beam Homogenization

Micromachines ◽  
2021 ◽  
Vol 12 (6) ◽  
pp. 673
Author(s):  
Wei Yuan ◽  
Cheng Xu ◽  
Li Xue ◽  
Hui Pang ◽  
Axiu Cao ◽  
...  
Keyword(s):  
Laser Beam ◽  
Microlens Array ◽  
Energy Utilization ◽  
Utilization Rate ◽  
Periodic Lattice ◽  
Lattice Distribution ◽  
Speckle Field ◽  
High Laser ◽  
Alignment Problem ◽  
In Series

Double microlens arrays (MLAs) in series can be used to divide and superpose laser beam so as to achieve a homogenized spot. However, for laser beam homogenization with high coherence, the periodic lattice distribution in the homogenized spot will be generated due to the periodicity of the traditional MLA, which greatly reduces the uniformity of the homogenized spot. To solve this problem, a monolithic and highly integrated double-sided random microlens array (D-rMLA) is proposed for the purpose of achieving laser beam homogenization. The periodicity of the MLA is disturbed by the closely arranged microlens structures with random apertures. And the random speckle field is achieved to improve the uniformity of the homogenized spot by the superposition of the divided sub-beams. In addition, the double-sided exposure technique is proposed to prepare the rMLA on both sides of the same substrate with high precision alignment to form an integrated D-rMLA structure, which avoids the strict alignment problem in the installation process of traditional discrete MLAs. Then the laser beam homogenization experiments have been carried out by using the prepared D-rMLA structure. The laser beam homogenized spots of different wavelengths have been tested, including the wavelengths of 650 nm (R), 532 nm (G), and 405 nm (B). The experimental results show that the uniformity of the RGB homogenized spots is about 91%, 89%, and 90%. And the energy utilization rate is about 89%, 87%, 86%, respectively. Hence, the prepared structure has high laser beam homogenization ability and energy utilization rate, which is suitable for wide wavelength regime.

scholarly journals Energetic and exergetic analysis of a convective drier: A case study of potato drying process

2020 ◽  
Vol 5 (1) ◽  
pp. 563-572
Author(s):  
Iman Golpour ◽  
Mohammad Kaveh ◽  
Reza Amiri Chayjan ◽  
Raquel P. F. Guiné
Keyword(s):  
Energy Consumption ◽  
Research Work ◽  
Specific Energy Consumption ◽  
Exergy Efficiency ◽  
Operating Conditions ◽  
Energy Utilization ◽  
Convective Drying ◽  
Drying Time ◽  
Energy And Exergy ◽  
Exergy Losses

AbstractThis research work focused on the evaluation of energy and exergy in the convective drying of potato slices. Experiments were conducted at four air temperatures (40, 50, 60 and 70°C) and three air velocities (0.5, 1.0 and 1.5 m/s) in a convective dryer, with circulating heated air. Freshly harvested potatoes with initial moisture content (MC) of 79.9% wet basis were used in this research. The influence of temperature and air velocity was investigated in terms of energy and exergy (energy utilization [EU], energy utilization ratio [EUR], exergy losses and exergy efficiency). The calculations for energy and exergy were based on the first and second laws of thermodynamics. Results indicated that EU, EUR and exergy losses decreased along drying time, while exergy efficiency increased. The specific energy consumption (SEC) varied from 1.94 × 105 to 3.14 × 105 kJ/kg. The exergy loss varied in the range of 0.006 to 0.036 kJ/s and the maximum exergy efficiency obtained was 85.85% at 70°C and 0.5 m/s, while minimum exergy efficiency was 57.07% at 40°C and 1.5 m/s. Moreover, the values of exergetic improvement potential (IP) rate changed between 0.0016 and 0.0046 kJ/s and the highest value occurred for drying at 70°C and 1.5 m/s, whereas the lowest value was for 70°C and 0.5 m/s. As a result, this knowledge will allow the optimization of convective dryers, when operating for the drying of this food product or others, as well as choosing the most appropriate operating conditions that cause the reduction of energy consumption, irreversibilities and losses in the industrial convective drying processes.

scholarly journals Analytical Investigation of a Novel System for Combined Dew Point Cooling and Water Recovery

2021 ◽  
Vol 11 (4) ◽  
pp. 1481
Author(s):  
Aleksandra Cichoń ◽  
William Worek
Keyword(s):  
Energy Consumption ◽  
Convective Heat Transfer Coefficient ◽  
Specific Energy Consumption ◽  
Analytical Investigation ◽  
Dew Point ◽  
Energy Utilization ◽  
Coefficient Of Performance ◽  
Air Cooling ◽  
Water Recovery ◽  
Utilization Factor

This paper presents the analytical investigation of a novel system for combined Dew Point Cooling and Water Recovery (DPC-WR system). The operating principle of the presented system is to utilize the dew point cooling phenomenon implemented in two stages in order to obtain both air cooling and water recovery. The system performance is described by different indicators, including the coefficient of performance (COP), gained output ratio (GOR), energy utilization factor (EUF), specific energy consumption (SEC) and specific daily water production (SDWP). The performance indicators are calculated for various climatic zones using a validated analytical model based on the convective heat transfer coefficient. By utilizing the dew point cooling phenomenon, it is possible to minimize the heat and electric energy consumption from external sources, which results in the COP and GOR values being an order of magnitude higher than for other cooling and water recovery technologies. The EUF value of the DPC-WR system ranges from 0.76 to 0.96, with an average of 0.90. The SEC value ranges from 0.5 to 2.0 kWh/m3 and the SDWP value ranges from 100 to 600 L/day/(kg/s). In addition, the DPC-WR system is modular, i.e., it can be multiplied as needed to achieve the required cooling or water recovery capacity.

scholarly journals Calculation and Analysis of the Interval Power Flow for Distributed Energy System Based on Affine Algorithm

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 600
Author(s):  
Bin Ouyang ◽  
Lu Qu ◽  
Qiyang Liu ◽  
Baoye Tian ◽  
Zhichang Yuan ◽  
...  
Keyword(s):  
Power Flow ◽  
Load Condition ◽  
Energy Systems ◽  
Energy System ◽  
Optimal Operation ◽  
Energy Utilization ◽  
Utilization Rate ◽  
Distributed Energy ◽  
Low Load ◽  
Distributed Energy System

Due to the coupling of different energy systems, optimization of different energy complementarities, and the realization of the highest overall energy utilization rate and environmental friendliness of the energy system, distributed energy system has become an important way to build a clean and low-carbon energy system. However, the complex topological structure of the system and too many coupling devices bring more uncertain factors to the system which the calculation of the interval power flow of distributed energy system becomes the key problem to be solved urgently. Affine power flow calculation is considered as an important solution to solve uncertain steady power flow problems. In this paper, the distributed energy system coupled with cold, heat, and electricity is taken as the research object, the influence of different uncertain factors such as photovoltaic and wind power output is comprehensively considered, and affine algorithm is adopted to calculate the system power flow of the distributed energy system under high and low load conditions. The results show that the system has larger operating space, more stable bus voltage and more flexible pipeline flow under low load condition than under high load condition. The calculation results of the interval power flow of distributed energy systems can provide theoretical basis and data support for the stability analysis and optimal operation of distributed energy systems.

scholarly journals Analysis of total carbon emission of the logistics industry in Guangdong and solutions to emission reduction

2021 ◽  
Vol 245 ◽  
pp. 01020
Author(s):  
Aixia Xu ◽  
Xiaoyong Yang
Keyword(s):  
Energy Consumption ◽  
Carbon Emissions ◽  
Carbon Emission ◽  
Energy Utilization ◽  
Total Carbon ◽  
Utilization Rate ◽  
Low Carbon ◽  
Logistics Industry ◽  
Direct Energy ◽  
Reduce Emissions

The input-output method is employed in this study to measure the total carbon emission of the logistics industry in Guangdong. The findings revealed that the carbon emission of direct energy consumption of the logistics industry in Guangdong is far above the actual carbon emissions, the second and third industries play a significant role in carbon emission of indirect energy consumption in the logistics industry in Guangdong. To reduce energy consumption and carbon emissions in Guangdong, it is not only important to control the carbon emissions in the logistics industry, but strengthen carbon emission detection in relevant industries, improve the energy utilization rate and reduce emissions in other industries, and move towards low-carbon sustainable development.

Simulation and Analysis of Cryogenic Air Separation Process with LNG Cold Energy Utilization

2014 ◽  
Vol 881-883 ◽  
pp. 653-658 ◽  
Author(s):  
Yong Qiang Xiong ◽  
Ben Hua
Keyword(s):  
Energy Consumption ◽  
Liquid Nitrogen ◽  
Electric Energy ◽  
Separation Process ◽  
Air Separation ◽  
Energy Utilization ◽  
Utilization Efficiency ◽  
Pure Oxygen ◽  
Pure Nitrogen ◽  
Cold Energy

In this paper, a cryogenic air separation process with LNG cold energy utilization is proposed to produce liquid nitrogen and high pressure pure oxygen gas economically. To reduce the electric energy consumption of air separation products, liquid nitrogen have been produced by condensing the separated pure nitrogen gas with LNG cold energy utilization, and the recycled nitrogen is served to transfer cold energy from LNG stream to cool off air stream in the proposed cryogenic air separation process. The specifications of streams and the major equipments of the air separation process are simulated with Aspen Plus software and the main parameters analysis are performed. The results show that the energy consumption of the proposed air separation process with LNG cold energy utilization decreased about 58.2% compared with a conventional cryogenic air separation process. The compressed pressure of recycled nitrogen has a big impact on the cost of air separation products and utilization efficiency of LNG cold energy. The LNG cold energy could be fully utilized when the recycled nitrogen has been compressed to above 6.5MPa.

Effects of Mixing Chamber Shape on Cutting Performance in Abrasive Water Jet

2013 ◽  
Vol 652-654 ◽  
pp. 2134-2139
Author(s):  
Hyo Ryeol Lee ◽  
Yong Sik Cho ◽  
Hwa Young Kim ◽  
Jung Hwan Ahn
Keyword(s):  
Surface Roughness ◽  
Cutting Speed ◽  
Water Jet ◽  
Orifice Diameter ◽  
Abrasive Water Jet ◽  
Processing Technologies ◽  
Mixing Chamber ◽  
Energy Processing ◽  
And Performance ◽  
Pump Pressure

It is well known that abrasive water jet(AWJ) was developed as a kind of high-density energy processing technologies. AWJ is used to obtain cutting quality of various materials such as metal, ceramics, glass and composite materials within a short manufacturing time because of the characteristics of heatless and noncontact processing. However, surface roughness and dimension error like round, burr, taper depend on the cutting conditions such as pump pressure, cutting speed, orifice diameter, stand off distance, abrasive flow rate and workpiece. In this paper, the effect of the shape of mixing chamber on surface quality is studied. Parabolic mixing chamber is proposed and performance is compared to that of cylindrical mixing chamber by experiment. The surface roughness was improve 0.15㎛ to 2.29㎛ and the taper angle was improve 0.0716° to 0.143° by parabolic mixing chamber.

scholarly journals An Analysis of the Current Status of Woody Biomass Gasification Power Generation in Japan

Energies ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4903
Author(s):  
Yasutsugu Baba ◽  
Andante Hadi Pandyaswargo ◽  
Hiroshi Onoda
Keyword(s):  
Power Generation ◽  
Moisture Content ◽  
Tree Species ◽  
Woody Biomass ◽  
Biomass Gasification ◽  
Energy Utilization ◽  
Current Status ◽  
Utilization Rate ◽  
Small Scale ◽  
Bio Oil

Forests cover two-thirds of Japan’s land area, and woody biomass is attracting attention as one of the most promising renewable energy sources in the country. The Feed-in Tariff (FIT) Act came into effect in 2012, and since then, woody biomass power generation has spread rapidly. Gasification power generation, which can generate electricity on a relatively small scale, has attracted a lot of attention. However, the technical issues of this technology remain poorly defined. This paper aims to clarify the problems of woody biomass gasification power generation in Japan, specifically on the challenges of improving energy utilization rate, the problem of controlling the moisture content, and the different performance of power generation facilities that uses different tree species. We also describe the technological development of a 2 MW updraft reactor for gasification and bio-oil coproduction to improve the energy utilization rate. The lower heating value of bio-oil, which was obtained in the experiment, was found to be about 70% of A-fuel oil. Among the results, the importance of controlling the moisture content of wood chips is identified from the measurement evaluation of a 0.36 MW-scale downdraft gasifier’s actual operation. We discuss the effects of tree species variation and ash on gasification power generation based on the results of pyrolysis analysis, industry analysis for each tree species. These results indicate the necessity of building a system specifically suited to Japan’s climate and forestry industry to allow woody biomass gasification power generation to become widespread in Japan.

Sign in / Sign up

Export Citation Format

Share Document