scholarly journals Evaluation of antimicrobial activity of some plant extracts against antibiotic susceptible and resistant bacterial strains causing wound infection

Author(s):  
Nagwa M. Atef ◽  
Sanaa M. Shanab ◽  
Sahar I. Negm ◽  
Yasmeen A. Abbas
Nanomaterials ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 1005
Author(s):  
Aneta Salayová ◽  
Zdenka Bedlovičová ◽  
Nina Daneu ◽  
Matej Baláž ◽  
Zdenka Lukáčová Bujňáková ◽  
...  

A green synthetic route for the production of silver nanoparticles (AgNPs) using five different aqueous plant extracts, namely, Berberis vulgaris, Brassica nigra, Capsella bursa-pastoris, Lavandula angustifolia and Origanum vulgare, was investigated in this study. The present work demonstrates the influence of plant extract composition (antioxidant and total phenolic content) on the size and morphology of the produced AgNPs. The biosynthetic procedure was rapid and simple and was easily monitored via colour changes and ultraviolet and visible (UV-Vis) spectroscopy. Subsequently, measurement of zeta potential (ZP), photon cross-correlation spectroscopy (PCCS), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM) and selected area electron diffraction (SAED) analysis were employed to characterise the as-synthesised nanoparticles. The XRD investigation confirmed the presence of Ag0 in the nanoparticles, and interactions between the bioactive compounds of the plants and the produced AgNPs were evident in the FTIR spectra. TEM indicated that the nanoparticles exhibited a bimodal size distribution, with the smaller particles being spherical and the larger having a truncated octahedron shape. In addition, the antimicrobial activity of the AgNPs was tested against five bacterial strains. All synthesised nanoparticles exhibited enhanced antimicrobial activity at a precursor concentration of 5 mM compared to the control substance, gentamicin sulphate, with the best results observed for AgNPs prepared with B. nigra and L. angustifolia extracts.


2021 ◽  
Vol 14 (2) ◽  
pp. 185-196
Author(s):  
Jatin Chadha ◽  
Manish Gupta ◽  
Nishtha Nagpal ◽  
Madhav Sharma ◽  
Tarun Adarsh ◽  
...  

The extensive use of antibiotics to treat bacterial infections has led to the widespread emergence of multidrug-resistant (MDR) pathogens, becoming increasingly difficult to treat with currently available antibacterial agents. The present study is based on prospecting the ethnomedicinal potential of Indian plant varieties for the treatment of MDR bacteria. Plants produce an array of diverse pharmacological compounds in defence against microbial pathogens which may be employed as a novel intervention strategy to combat MDR human pathogens. In the present study, the antimicrobial activity of extracts of four common Indian plants: Azadirachta indica (Neem), Murraya koenigii (Kadipatta), Phyllanthus emblica (Amla), and Ocimum sanctum (Tulsi) prepared in four solvents, water, methanol, ethanol, and chloroform was tested against nine MDR bacterial isolates. Kirby-Bauer well diffusion assays were adopted to assess the antimicrobial activity of plant extracts against the MDR strains. The potency of plant extracts was examined by determining the Minimum Inhibitory Concentration (MIC) and Minimum Bactericidal Concentration (MBC). All MDR isolates including Staphylococcus haemolyticus, Bacillus subtilis, B. thuringiensis, B. cereus, Enterobacter xiangfangensis, Klebsiella pneumoniae, and Pseudomonas aeruginosa were significantly inhibited by the plant extracts. Test extracts showed promising antibacterial potential against MDR P. aeruginosa and Bacillus sp. with low MIC values ranging between 0.02-1.56 mg/ml, while most plant extracts exhibited either moderate MBC values or bacteriostatic effects. To the best of our knowledge, this is the first study that demonstrates the potential use of endemic A. indica, M. koenigii, P. emblica, and O. sanctum as therapeutic agents against circulating MDR human pathogens in the national capital.


2018 ◽  
Vol 25 (2) ◽  
pp. 361-366 ◽  
Author(s):  
Ashraf A. Mostafa ◽  
Abdulaziz A. Al-Askar ◽  
Khalid S. Almaary ◽  
Turki M. Dawoud ◽  
Essam N. Sholkamy ◽  
...  

Proceedings ◽  
2020 ◽  
Vol 70 (1) ◽  
pp. 79
Author(s):  
Mariana C. Pedrosa ◽  
Jonata M. Ueda ◽  
Sandrina Heleno ◽  
Bruno Melgar ◽  
Marija Ivanov ◽  
...  

The 21st century has brought along many changes in how consumers look at food and perceive their diets. There is an increasing awareness towards what goes into manufacturing these foods, with an important concern being drawn towards food additives. While it is known that additives are needed to preserve or change attributes of food, it is also widely understood that consumers prefer natural additives to artificial ones, and thus, the industry is looking for alternatives from plant sources. The extraction of five different plants (oregano (Origanum vulgare L.), rosemary (Rosmarinus officinalis L.), salvia (Salvia officinalis L.), lemon balm (Melissa officinalis L.), and basil (Ocimum basilicum L.)) was optimized for three extraction types, namely decoction, infusion, and cold hydroethanolic (80:20) ultrasound-assisted extraction. This optimization was carried out through a screening analysis to find the most important factors, using Design Expert, pending the analysis of phenolic compounds through HPLC-DAD-ESI/MS. The optimized variables used were temperature, time of extraction, and potency (ultrasound). The extraction with the highest phenolic content for each plant was then selected and screened for its antibacterial and antifungal activity, relying on the microdilution method against foodborne pathogens. The bacterial strains used were Staphylococcus aureus, Bacillus cereus, Listeria monocytogenes, Escherichia coli, Salmonella typhimurium and Enterobacter cloacae, while the fungal strains were Aspergillus fumigatus, Aspergillus niger, Aspergillus versicolor, Penicillium funiculosum, Trichoderma viride, and Penicillium verrucosum var. cyclopium. Two synthetic and widely used preservatives, namely sodium benzoate (E211) and potassium metabisulfite (E224), were also screened against these contaminants to confirm the sensitivity of the microorganisms to these known artificial preservatives. Overall, the plant extracts showed a high inhibition of fungi, with all extracts showing lower minimum inhibition concentrations than both the synthetic preservatives, except for P. viridae, where E224 showed the same inhibition capacity. Regarding the antibacterial activity, the bacteria most sensitive to the extracts was B. cereus, for which all the extracts showed the same activity as E224. Lemon balm was the stronger extract, showing the same inhibition as E221 against B. cereus and E. cloacae. Overall, this work proves that plant extracts obtained though “green” and low-cost technologies can be alternatives to artificial food additives, due to showing the same, or, in some cases, better antimicrobial activity. Furthermore, a mixture of these extracts can result in synergistic effects and improve the antimicrobial activities. The next step of this work, which is ongoing, will focus on the determination of the efficacy of these extracts and their incorporation in muffins.


Author(s):  
A Afzal ◽  
B Aftab ◽  
J Siddique ◽  
S Babar ◽  
A Sohail ◽  
...  

The Swertia chirayita and Artemisia absinthium (Afsanteen) plants extracts were evaluated for phytochemicals and their antimicrobial activity against 3 bacteria and 2 fungal strains by using the disc diffusion technique. Phytochemical analysis showed the presence of tannins, flavonoids, saponins, and terpenoids in Swertia chirayita while in Artemisia absinthium only saponins, terpenoids were present. To a very small extent tannins were present in the ethanolic extract of Afsanteen. But both plant extracts gave negative results for the presence of cardiac glycosides. Antibacterial activity of Swertia chirayita and Afsanteen plant extracts were screened against 3 bacterial strains (E. coli, Bacillus subtilis, Pseudomonas syringola) and 2 fungal strains (Aspergillus niger and Fusarium Solani). Ampicillin was used as a standard drug for antibacterial and antifungal activity. Results showed that Afsanteen and chirayita extracts showed activity against bacterial strains except for chirayita n-hexane and ethanol extract for Bacillus subtilis and Chirayita n-hexane extract for Pseudomonas syringola. A maximum zone of inhibition was noticed for chirayita ethanol extract against Pseudomonas syringola. But both plant extracts showed zero activity against fungal strains except Chirayita acetone extract against Fusarium solani while chirayita ethanol extract against Aspergillus niger. Both extracts of plants gave concentration-dependent activity. It was concluded that the presence of antimicrobial activity for both plant extracts indicated that is due to the presence of phytochemical compounds.


Author(s):  
Singh Gurvinder ◽  
Singh Prabhsimran ◽  
Dhawan R. K.

In order to develop new antimicrobial agents, a series of 3-formyl indole based Schiff bases were synthesized by reacting 3-formyl indole(indole-3-carboxaldehyde) with substituted aniline taking ethanol as solvent. The reaction was carried in the presence of small amount of p-toluene sulphonic acid as catalyst.All the synthesized compounds were characterized by IR, 1H-NMR spectral analysis. All the synthesized compounds were evaluated for antimicrobial activity against two gram positive bacterial strains (B. subtilisand S. aureus) and two gram negative bacterial strains (P. aeruginosaand E. coli) and one fungal strain (C. albicans). All the synthesized compounds were found to have moderate to good antimicrobial activity. The  standard drug amoxicillin, fluconazole were used for antimicrobial activity. Among the synthesized compounds, the maximum antimicrobial activity was shown by compounds GS04, GS07, GS08 and GS10.


2020 ◽  
Author(s):  
Nusrat Abedin ◽  
Abdullah Hamed A Alshehri ◽  
Ali M A Almughrbi ◽  
Olivia Moore ◽  
Sheikh Alyza ◽  
...  

Antimicrobial resistance (AMR) has become one of the more serious threats to the global health. The emergence of bacteria resistant to antimicrobial substances decreases the potencies of current antibiotics. Consequently, there is an urgent and growing need for the developing of new classes of antibiotics. Three prepared novel iron complexes have a broad-spectrum antimicrobial activity with minimum bactericidal concentration (MBC) values ranging from 3.5 to 10 mM and 3.5 to 40 mM against Gram-positive and Gram-negative bacteria with antimicrobial resistance phenotype, respectively. Time-kill studies and quantification of the extracellular DNA confirmed the bacteriolytic mode of action of the iron-halide compounds. Additionally, the novel complexes showed significant antibiofilm activity against the tested pathogenic bacterial strains at concentrations lower than the MBC. The cytotoxic effect of the complexes on different mammalian cell lines show sub-cytotoxic values at concentrations lower than the minimum bactericidal concentrations.


2020 ◽  
Vol 16 ◽  
Author(s):  
Asma S. Algebaly ◽  
Afrah E. Mohammed ◽  
Mudawi M. Elobeid

Introduction: Fabrication of iron nanoparticles (FeNPs) has recently gained a great concern for their varied applications in remediation technologies of the environment. Objective: The current study aimed to fabricate iron nanoparticles by green technology approach using different plant sources, Azadirachta indica leaf and Calligonum comosum root following two extraction methods. Methods: Currently, a mixture of FeCl2 and FeCl3 was used to react with the plant extracts which are considered as reducing and stabilizing agents for the generation of FeNPs in one step. Different techniques were used for FeNPs identification. Results: Immediately after mixing of the two reaction components, the color changed to dark brown as an indication of safe conversion of Fe ions to FeNPs, that later confirmed by zeta sizer, transmission electron microscopy (TEM) and scanning electron microscopy (SEM). FeNPs fabricated by C. comosum showed smaller size when compared by those fabricated by A. indica. Using both plant sources, FeNPs fabricated by the aqueous extract had smaller size in relation to those fabricated by ethanolic extract. Furthermore, antibacterial ability against two bacterial strains was approved. Conclusion: The current results indicated that, at room temperature plant extracts fabricated Fe ion to Fe nanoparticles, suggesting its probable usage for large scale production as well as its suitability against bacteria. It could also be recommended for antibiotic resistant bacteria.


2019 ◽  
Vol 9 (4) ◽  
pp. 268-279
Author(s):  
Mohamed E.I. Badawy ◽  
Ibrahim E.A. Kherallah ◽  
Ahmed S.O. Mohareb ◽  
Mohamed. Z.M. Salem ◽  
Hameda A. Yousef

Background:Plant extracts are important products in the world and have been widely used for isolation of important biologically active products. Because of their significant environmental impact, extensive research has been explored to determine the antimicrobial activity of plant extracts.Methods:Acetone extracts of the bark and leaf of Cupressus sempervirens and Juniperus phoenicea, collected from three different altitudes (125, 391, and 851 m high of sea level) at Al- Jabel Al-Akhdar area, Libya were obtained and analyzed by GC/MS. The antimicrobial activity of the extracts was further evaluated against plant bacteria Rhizobium radiobacter, Erwinia carotovora, Rhodococcus fascians and Ralstonia solanacearum and fungus Botrytis cinerea.Results:The impact of the altitude from the sea level on the quantity and chemical constituents of the extracts was investigated. The yield was largely dependent on tree species and the highest yield (6.50%) was obtained with C. sempervirens L bark of altitude III (851 m of the sea level), while the lowest (1.17%) was obtained with the leaf extract of C. sempervirens L from altitude I (125 m). The chemical composition analyzed by GC/MS confirmed that the leaf extracts of C. sempervirens and J. phoenicea contained a complex mixture of monoterpene hydrocarbons, sesquiterpenes, diterpenes, diterpenoids, terpenophenolic, steroids and phthalates. However, the bark extracts of both trees contained a mixture of sesquiterpenes, diterpenes, diterpenoids, terpenophenolics, phthalates, retinol and steroids. These constituents revealed some variability among the extracts displaying the highest interesting chemotype of totarol (terpenophenolic) in all extracts (14.63-78.19% of the total extract). The extracts displayed a noteworthy antifungal potency with varying degrees of inhibition of growth with EC50 values ranged from 78.50 to 206.90 mg/L. The extracts obtained from the leaves of C. sempervirens showed that the highest inhibitory activity was obtained with the extract of altitude II (391 m) with MIC 565, 510, 380 and 710 mg/L against E. carotovora, R. fascians, and R. radiobacter and R. solanacearum, respectively.Conclusion:Based on antimicrobial activity, raw plant extracts can be a cost-effective way to protect crops from microbial pathogens. Because plant extracts contain several antimicrobial compounds, the development of resistant pathogens can be delayed.


Sign in / Sign up

Export Citation Format

Share Document