The T3 Quartz Infrared Lamps

2020 ◽  
pp. 65-74
Author(s):  
Raymond Kane ◽  
Steve Sirek
Keyword(s):  
1997 ◽  
Vol 502 ◽  
Author(s):  
A. T. Fiory

ABSTRACTThermal processing in silicon integrated circuit fabrication steps for dopant activation, metal silicides, annealing, and oxidation commonly uses single-wafer furnaces that rapidly heat wafers with incandescent infrared lamps. Radiation pyrometers and thermocouple probes are the principle methods of measuring wafer temperature for closed-loop control of rapid thermal processes. The challenge with thermocouples is in dealing with heat from the lamps and non-ideal thermally resistive wafer contact. The challenge with pyrometry is in compensating for the variable emissivity of wafer surfaces and suppressing interference from the lamps. Typical deposited or grown layers of silicon nitride, silicon dioxide, and polycrystalline silicon can produce dramatic changes in emissivity. Layer thicknesses and composition are generally not known with sufficient accuracy, so a method for real time in situ emissivity compensation is required. Accufiber introduced a “ripple technique” to address this issue. The idea is to use two probes, separately sensing radiation from the wafer and the lamps, and extracting AC and quasi-DC parts from each. The AC signals provide a measure of the reflectivity of the wafer, and thence emissivity, as well as the fraction of reflected lamp radiation present in the DC signals. Lucent Technologies introduced a method of using AC lamp ripple to measure wafer temperatures with two radiation probes at a wall in the furnace. One probe views radiation emanating from the wafer through a gap in the lamp array. The other probe has a wide field of view to include lamp radiation. The accuracy of Lucent devices, determined from process results on wafers with various emissivities, is typically in the range of 12°C to 18°C at three standard deviations.


1995 ◽  
Vol 73 (5) ◽  
pp. 879-886 ◽  
Author(s):  
Michel Thibault ◽  
Raymond McNeil

With the use of a time-lapse video camera and infrared lamps, we quantified diurnal and nocturnal incubation sex roles in 17 pairs of Wilson's Plovers (Charadrius wilsonia cinnamominus) breeding in northeastern Venezuela. More than 82% of nests reached the hatching stage. Between the laying of the last egg and hatching of the first one, parents devoted 83% of their time incubating. Males spent more time incubating than females. Males incubated mainly at night and females mostly during daytime. Males also spent significantly more time incubating during daytime than did females during nighttime. During incubation, females relieved males at dawn and males relieved females at dusk. By relieving each other under conditions of low light intensity, parents probably reduced nest predation. Outside the breeding season, the Wilson's Plovers forage almost exclusively during nighttime. In contrast, during the breeding season, males foraged mainly during daytime low tides, probably as a consequence of their nocturnal nest attendance. During short daytime periods, on cloudy days, incubating plovers, particularly the females, abandoned their eggs to forage.


2015 ◽  
Vol 764-765 ◽  
pp. 269-273 ◽  
Author(s):  
Yi Chern Hsieh ◽  
Minh Hai Doan ◽  
Chien Min Hung

PET prefom surface temperature distribution is a key factor for getting the better quality of construction a bottle by stretch blow molding (SBM) machine. To get a better temperature distribution, different types of prefom under different number of infrared lamps heating conditions are worth to investigate the position of each lamp as well as its power intensity. In this study, we first try to use adaptive finite volume method to estimate the proper intensity of each lamp so that the combination strength will make good result about the temperature distribution. Then we make experiments to confirm each case. We have five, six, and seven heating lamps cases to present. With these estimations, we find that five lamps case can do equal quality about the temperature distribution comparing with six and seven lamps cases. This means that we offer a method for finding one saving energy way to produce PET bottle by SBM machine. A more detail analysis about inside PET bottle temperature distribution will be deliberated in future.


2015 ◽  
Vol 8 (6) ◽  
pp. 777-782 ◽  
Author(s):  
Showkat A. Bhat ◽  
Bharat Bhushan ◽  
Sajad A. Sheikh ◽  
T. Chandrasekar ◽  
Asu Singh Godara ◽  
...  
Keyword(s):  

2021 ◽  
Vol 937 (2) ◽  
pp. 022092
Author(s):  
Igor Khozyaev ◽  
Dmitriy Savenkov ◽  
Alexey Shcherbakov ◽  
Rustam Mekhraliev ◽  
Valentina Serdyuk

Abstract The article is devoted to the study of infrared drying of products in a reduced pressure chamber using the convection effect. With the use of drying, canning of fruits, vegetables, herbs and meat is achieved, which reduces not only the volume, but also the weight of the processed raw materials. The paper presents the main parameters of drying products online, such as relative humidity, pressure, radiation intensity of infrared lamps, drying temperature. The uniqueness of this unit in comparison with similar dryers is a one-time treatment of the product with infrared rays under reduced pressure, convection of air flows inside the drying chamber and full automation of the drying process of any product of plant and animal origin. Determination of parameters and modes of drying was carried out on products of plant origin. During the experimental part, bananas and apples were used. In experimental studies, products such as bell peppers, apples and bananas with various slicing thicknesses were used. The greatest drying effect was obtained with a drying product thickness of 5 mm, and the worst with a product thickness of 10 mm. For example, pepper has decreased in weight from 79.84 grams. up to 23.43 gr., which is his weight loss by 70.65%.


2020 ◽  
Vol 1 (38) ◽  
pp. 89-95
Author(s):  
Chi Thi Le Diep ◽  
Nho Thi Vo

This study aimed to determine the effects of infrared lamps on survival rates of mature and immature common sun skinks (Eutropis multifasciata) in semi-natural conditions in Quang Binh Province, Vietnam, in the cold weather. A sample size of 400 mature (28 weeks old) and 120 immature common sun skinks were used in a completely randomized design with two variables of different lighting methods: infrared and incandescent light. Suitable food and water were freely provided. Results showed that the survival rates of the mature and juvenile common sun skinks were 82.5% and 39.2% with infrared light and 30.5% and 0% with incandescent light. Compared to incandescent light, the growth of young offsprings in the first 4 weeks after birth was greater with the infrared light and the average cumulative growth weight reached 2.18 g per individualby the fourth week. With incandescent light, common sun skinks lost their weight over time and gradually died out by the third week. Thus, infrared light which can be used to warm up pens may be an effective techniquein raising common sun skinks in semi-natural conditions in Quang Binh.


1972 ◽  
Vol 55 (5) ◽  
pp. 1027-1030 ◽  
Author(s):  
John L Iverson

Abstract A joint AOAC-OICC method for determining ash in cacao products, combining the best features of AOAC method 13.003 and OICC method 4a-E/1952 and with an ashing temperature of 600°C, has been developed. The results from an international collaborative study with 12 collaborators were in good agreement. The preferred method is pre-ashing of the sample under infrared lamps, followed by overnight ashing, thus eliminating reweighing at intervals to arrive at constant weight. The method for determining ash in cacao products has been adopted as official first action.


2019 ◽  
Vol 97 (Supplement_3) ◽  
pp. 191-192
Author(s):  
Simone M Schmid ◽  
Jason J Hayer ◽  
Celine Heinemann ◽  
Julia Steinhoff-Wagner

Abstract In several countries, an application of general anesthesia for pain prevention during castration is discussed. A disadvantage is the prolonged recovery phase, accompanied by severe body temperature drops in piglets. Aim of this study was to investigate effects on body temperature during recovery after anesthesia. Piglets were anesthetized, castrated and placed in boxes (0.24m2) for 4h. Before, 2 and 4h after the application (0.3ml ketamine+azaperone/kg BW), rectal temperatures (RT) and skin temperatures behind the ear (ST) were measured. In a first trial, impacts of infrared lamp (250W, 50-55cm height) and number of animals per box (3 vs 6) were analyzed (n = 30). In a complementary trial, infrared lamps’ height (60 vs 70cm) and piglet age were varied (n = 27) and temperatures measured half-hourly. Differences were estimated in linear models (SAS® 9.4). Mean RT before anesthesia was 39.1±0.4°C with ranges of less than 1.9°C. After 2h, mean RT in lamp-warmed piglets increased to 40.8°C (P < 0.01), whereas in absence of lamps RT dropped to 37.3 (P < 0.001), with significant differences between groups (P < 0.001). To prevent life-threatening cooling, piglets with RT as minimal as 33.5°C were warmed immediately, so that their mean RT after 4h was not different from initial temperatures. Animal number per box caused no differences. Variation between individual RT was up to 8.2°C at 2h (first trial). Means in the second trial did not differ, but variation pattern of individual temperatures was highest after 1h (6.1°C), indicating that individual differences regarding anesthetics or external factors might occur. When lamps hung lower ST were higher after 3h (P < 0.05) and 4h (P < 0.01). RT and ST were dependent on age after 0.5h (P < 0,05, respectively) and tendentious at 1h and 2h, indicating that older piglets can rely on more distinct temperature regulation abilities and use endogenous energy resources to regain homeostasis.


Author(s):  
Showkat A. Bhat ◽  
Bharat Bhushan ◽  
Narendra Kumar ◽  
S. A. Lone ◽  
Pranay Bharti ◽  
...  

The main aim of this study was to determine the role of Infrared lamps in cold stress alleviation during winter in Murrah calves. Ten newborn calves were randomly divided into two groups (G1 and G2) of five each. The calves of G1 were provided with no additional protection; however calves of G2 were protected against cold weather by using Infrared lamps. The body weight (kg) of calves was recorded at weekly interval. The blood samples collected at fortnightly interval were analyzed for Packed Cell volume (PCV, %), hemoglobin (Hb, g/dl), Total Serum Protein (TSP, g/l), albumin (g/l), globulin (g/l) and albumin globulin (A:G) ratio and hormones viz., triiodothyronine (T3, ng/ml), thyroxine (T4, ng/ml) and cortisol (ng/ml). The total body weight gain and average daily gain (ADG) was significantly (P<0.01) higher in G2 as compared to G1. The PCV values were significantly (P<0.05) higher on day 15 and day 45 in G1 than G2. The albumin and A:G Ratio were significantly (P<0.05) higher on day 60 and 45, respectively in G1 than G2. The cortisol levels were higher in G1 than G2 and differences were highly significant (P<0.01) on 15th day and significant (P<0.05) on 45th day. Significantly (P<0.01) higher values of T3 and T4 were observed on 15th and 45th day in G1 as compared to G2. On the basis of the results, it may be concluded that Infrared lamps can be effectively used to protect newborn calves from adverse conditions of winter and to improve their body growth performance.


2012 ◽  
Vol 504-506 ◽  
pp. 1111-1116
Author(s):  
Daniel Ahmad ◽  
Nahiene Hamila ◽  
Khalid Lamnawar ◽  
Philippe Boisse

Most of industrial processes (thermoforming, injection moulding...) require the understanding of thermo-mechanical behaviour of polymeric sheets. Furthermore, the mastery of the deformation of the polymers becomes an important stake. In order to improve and complete the understanding of the deformation of thermoplastic polymer materials during their forming processes, the problem of modelling the thermoforming process for viscoelastic sheet under large strains is considered. The first step of the process that consists in heating the sheet using infrared lamps is taken into account by included a temperature field in viscoelastic behaviour laws under integral forms. The finite element simulation of the different steps will be presented


Sign in / Sign up

Export Citation Format

Share Document