scholarly journals Effect of Ag Doping on Properties of Al–Doped ZnO Nanoparticles Varies as Zn1-X-YAgxALYO

2017 ◽  
Vol 14 (2) ◽  
pp. 146-152
Author(s):  
Neha Sharma ◽  
Sanjayay Kumar
Keyword(s):  
Zno Nanoparticles ◽  
Spherical Shape ◽  
Xrd Analysis ◽  
Crystalline Size ◽  
X Ray Diffraction ◽  
X Ray ◽  
In Doping ◽  
Vis Spectroscopy ◽  
Doped Zno

In present study, undoped ZnO, Zn0.8Ag0.2O, Zn0.8Al0.2O and Zn0.6Al0.2Ag0.2O samples are synthesized by simple solution method. X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Energy-Dispersive X-ray spectroscopy (EDX) and UV-visible (UV-Vis) spectroscopy are used to perform the characterization of undoped, doped and codoped samples. XRD analysis is exposed that hexagonal wurtzite crystalline structure obtained for undoped, doped and codoped samples without any extra representation of impurity phases. The crystalline size is when evaluated by using Scherrer, It has 44, 49, 41and 37nm for undoped ZnO, Zn0.8Ag0.2O, Zn0.8Al0.2O and Zn0.6Al0.2Ag0.2O samples. Similarly, the crystalline size and strain are also evaluated by Williamson hall (W-H) and size strain plot (SSP) for the undoped, doped and codoped nanoparticles. The evaluated crystalline size by SSP is three times greater than the result of the scherrer method. The SEM exposes that surface morphology of nanoparticle samples, in this case is the formation of large agglomeration in spherical shape with nanocrystallites of undoped and doped ZnO with apparent and definite boundaries. EDX points out the replacement of Al2+ and Ag+ with Zn2+ in ZnO matrix and consequences in the development of single-phase Zn1−x−yAgxAlyO. The blueshift is shown in UV-Vis absorption spectra because the band gap value increases with the increase in doping, except Ag+ doped ZnO nanoparticles.

scholarly journals STRUCTURAL CHARACTERIZATION OF Co-DOPED ZnO NANOPARTICLES USING X-RAY DIFFRACTION AND RAMAN SPECTROSCOPY

2015 ◽  
Author(s):  
T. J. Castro ◽  
S. W. da Silva ◽  
F. Nakagomi ◽  
A. Franco Júnior ◽  
H. V. S. Pessoni ◽  
...  
Keyword(s):  
Raman Spectroscopy ◽  
Structural Characterization ◽  
Zno Nanoparticles ◽  
X Ray Diffraction ◽  
X Ray ◽  
Doped Zno ◽  
Co Doped

scholarly journals Structural and optical characteristic of 1-(4-Methylsulfonyl Phenyl)-3-(4-n, n Dimethyl (amino Phenyl)-2-Propen- 1-One (MSPPP) Chalcone doped ZnO nanoparticles

NanoNEXT ◽  
2021 ◽  
pp. 28-34
Author(s):  
Mohana F. Attia ◽  
Abdelrahman A. Elbadawi
Keyword(s):  
Zno Nanoparticles ◽  
Diffuse Reflection ◽  
Energy Gap ◽  
Hexagonal Wurtzite Structure ◽  
X Ray Diffraction ◽  
X Ray ◽  
Crystallite Sizes ◽  
Order Of Magnitude ◽  
Doped Zno

The purpose of this paper is to investigate the structural and optical characteristics of 1-(4-Methylsulfonyl Phenyl)-3-(4-n, n Dimethyl (amino Phenyl)-2-Propen- 1-One (MSPPP) Chalcone doped in ZnO nanoparticles. Part of the aim is to study the characterization of chalcone doped ZnO nanoparticles by several techniques such as X-ray diffraction, Scanning electron microscope, FTIR spectroscopy, and diffuse reflection spectra.  All doped samples showed a hexagonal wurtzite structure. This study has shown that the crystallite size of pure ZnO varied from 23.50 to 27.45 nm and when increasing the chalcone percentage by 0.5 and 1.5%, has increased the crystallite sizes in the range of 33.40–33.80 nm and 33.80–36.20 nm, respectively. The value of the energy gap (Eg) for ZnO nanoparticles was 3.14 eV. For 0.5 and 1.5% chalcone doped ZnO, the energy gap decreased by an order of magnitude 0.16 eV.

Synthesis of Imine-Bearing ZnO Nanoparticle Thin Films and Characterization of Their Structural, Morphological and Optical Properties

2015 ◽  
Vol 15 (10) ◽  
pp. 8114-8119 ◽  
Author(s):  
Narinder Kaur ◽  
Sanjeev K. Sharma ◽  
Deuk Young Kim ◽  
Hemant Sharma ◽  
Narinder Singh
Keyword(s):  
Thin Films ◽  
Zno Nanoparticles ◽  
Visible Region ◽  
Hexagonal Wurtzite Structure ◽  
Xrd Analysis ◽  
Zno Nanoparticle ◽  
X Ray Diffraction ◽  
X Ray ◽  
Corning Glass

We are presenting the first report on the fabrication of imine-bearing ZnO nanoparticle thin films grown on Corning glass by spin coating. The sol was prepared by dissolving imine-bearing ZnO nanoparticles in dimethylsulfoxide (DMSO). The thickness of the films was manipulated to be 125–200 nm. The X-ray diffraction (XRD) analysis showed hexagonal wurtzite structure of imine-bearing ZnO nanoparticles thin films with a (002) preferential orientation. The stretching of chemical bonds of the imine linkage and Zn–O in imine-bearing ZnO nanoparticle thin films was confirmed by fourier transform infrared spectroscopy (FTIR). The grain size of the films increased with increasing the thickness of the films due to the number of coatings and subsequently dried at 200°C. The transmittance of imine-bearing ZnO nanoparticle thin films was observed to be ≥94%, which was in close agreement to pure ZnO thin films in the visible region. The bandgap of imine-bearing ZnO nanoparticle thin films (3.04 eV), evaluated from Tauc’s plot, was observed to be lower than that of pure ZnO (3.21 eV), which is attributed to the interaction of the ZnO nanoparticles with the imine receptor.

scholarly journals Preparation and characterization of Mn doped ZnO nanorods -=SUP=-*-=/SUP=-

2018 ◽  
Vol 60 (5) ◽  
pp. 999
Author(s):  
R. Dilber Pushpitha ◽  
L. Bruno Chandrasekar ◽  
N.M. Segu Sahuban Bathusha ◽  
R. Chandramohan ◽  
M. Karunakaran ◽  
...  
Keyword(s):  
Zno Nanorods ◽  
Chemical Precipitation ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
Free Electrons ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Doped Zno ◽  
Mn Doped

AbstractMn doped ZnO nanorods were prepared by chemical precipitation method. The micro-structural and structural properties of the nanorods were calculated from the X-ray diffraction technique. The formed nanorods was seen in the scanning electron microscopy. The purity of the sample was confirmed by the energy dispersive X-ray analysis (EDX). The optical properties were studied using UV-Vis spectroscopy and photoluminescence. In the photoluminescence spectrum, the peaks due to recombination of free electrons, oxygen vacancy and intrinsic defects were observed. The magnetic properties were studied using vibrating sample magnetometer (VSM) and the paramagnetic nature of the material was confirmed.

Characterization and A Preliminary Study of TiO2 Synthesis from Lampung Iron Sand

2020 ◽  
Vol 849 ◽  
pp. 113-118
Author(s):  
Yayat Iman Supriyatna ◽  
Slamet Sumardi ◽  
Widi Astuti ◽  
Athessia N. Nainggolan ◽  
Ajeng W. Ismail ◽  
...  
Keyword(s):  
Food Packaging ◽  
Xrd Analysis ◽  
Major Elements ◽  
Raw Material ◽  
Solid Residue ◽  
X Ray Diffraction ◽  
X Ray ◽  
Leaching Solution ◽  
Ti Content

The purpose of this study is to characterize Lampung iron sand and to conduct preliminary experiments on the TiO2 synthesis which can be used for the manufacturing of functional food packaging. The iron sand from South Lampung Regency, Lampung Province that will be utilized as raw material. The experiment was initiated by sieving the iron sand on 80, 100, 150, 200 and 325 mesh sieves. Analysis using X-Ray Fluorescence (XRF) to determine the element content and X-Ray Diffraction (XRD) to observe the mineralization of the iron sand was conducted. The experiment was carried out through the stages of leaching, precipitation, and calcination. Roasting was applied firstly by putting the iron sand into the muffle furnace for 5 hours at a temperature of 700°C. Followed by leaching using HCl for 48 hours and heated at 105°C with a stirring speed of 300 rpm. The leaching solution was filtered with filtrate and solid residue as products. The solid residue was then leached using 10% H2O2 solution. The leached filtrate was heated at 105°C for 40 minutes resulting TiO2 precipitates (powder). Further, the powder was calcined and characterized. Characterization of raw material using XRF shows the major elements of Fe, Ti, Mg, Si, Al and Ca. The highest Ti content is found in mesh 200 with 9.6%, while iron content is about 80.7%. While from the XRD analysis, it shows five mineral types namely magnetite (Fe3O4), Rhodonite (Mn, Fe, Mg, Ca) SiO3, Quart (SiO2), Ilmenite (FeOTiO2) and Rutile (TiO2). The preliminary experiment showed that the Ti content in the synthesized TiO2 powder is 21.2%. The purity of TiO2 is low due to the presence of Fe metal which is dissolved during leaching, so that prior to precipitation purification is needed to remove impurities such as iron and other metals.

Antibacterial Activity of Nickel -Doped ZnO\MWCNTs hybrid Prepared by Sol-Gel technique

2021 ◽  
Author(s):  
Selma M.H. AL-Jawad ◽  
Zahraa S. Shakir ◽  
Duha S. Ahmed
Keyword(s):  
Antibacterial Activity ◽  
Sol Gel ◽  
Inhibition Zone ◽  
Sem Analysis ◽  
Morphological Properties ◽  
X Ray Diffraction ◽  
Zno Nps ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Doped Zno

ZnO/MWCNTs hybrid and doped with different concentration of Nickel element prepared by using Sol-gel been technique reported. All samples were prepared and characterized by X-Ray Diffraction Analysis (XRD), Energy Dispersive X-ray Spectroscopy (EDS), Fourier-Transform Infrared Spectroscopy (FTIR), Field-Emission Scanning Electron Microscopy (FE-SEM), and UV-Vis spectroscopy have been identified the structural, optical and morphological properties. X-ray diffraction showed the polycrystalline nature with hexagonal wutzite structure of hybrid and doped with Nickel. The crystalline size of the hybrid nanostructure was increasing from 23.73 nm to 34.59 nm. Besides, the UV-Vis spectroscopy showed a significant decrease in the band gap values from 2.97 eV to 2.01 eV. Whereas the FE-SEM analysis confirm the formation spherical shapes of ZnO NPs deposited on cylindrical tubes representing the MWCNTs. The antibacterial activity reveals that the inhibition zone of Ni doped-ZnO/MWCNTs hybrid was 28.5 mm, 26.5 mm toward E. coli and S. aureus bacteria, respectively.

Production and Characterization of HVOF Sprayed NiCr-TiC Coatings Using SHS Powder Feedstock

2000 ◽  
Author(s):  
M.T. Blatchford ◽  
A.J. Horlock ◽  
D.G. McCartney ◽  
P.H. Shipway ◽  
J.V. Wood
Keyword(s):  
Thermal Spraying ◽  
Xrd Analysis ◽  
Powder Size ◽  
Coating Properties ◽  
X Ray Diffraction ◽  
Hvof Spraying ◽  
X Ray ◽  
Wear Rates ◽  
Powder Feedstock

Abstract In this paper, the production of NiCr-TiC powder by SHS, suitable for HVOF spraying, is discussed together with results on the microstructure and coating properties. Compacts for SHS were prepared by mixing elemental Ti and C with pre-alloyed Ni-20wt.% Cr powder to give an overall composition of 35wt.% NiCr and 65wt.% TiC. These were then ignited and a self-sustaining reaction proceeded to completion. Reacted compacts were crushed, sieved, and classified to give feedstock powders in size ranges of 10-45 µm and 45-75 µm. All powder was characterized prior to spraying based on particle size distribution, x-ray diffraction (XRD), and scanning electron microscopy (SEM/EDS). Thermal spraying was performed using both H2 and C3H6 as fuel gases in a UTP/Miller Thermal HVOF system. The resulting coatings were characterized by SEM and XRD analysis, and the microstructures correlated with powder size and spray conditions. Abrasive wear was determined by a modified 'dry sand rubber wheel' (DSRW) test and wear rates were measured. It has been found that wear rates comparable to those of HVOF sprayed WC-17wt% Co coatings can be achieved.

scholarly journals Synthesis, Crystal Structures, and Spectroscopic Characterization of Bis-aldehyde Monomers and Their Electrically Conductive Pristine Polyazomethines

Polymers ◽  
2019 ◽  
Vol 11 (9) ◽  
pp. 1498 ◽  
Author(s):  
Abdul Hafeez ◽  
Zareen Akhter ◽  
John F. Gallagher ◽  
Nawazish Ali Khan ◽  
Asghari Gul ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Spectroscopic Characterization ◽  
Spectroscopic Techniques ◽  
Conductivity Measurements ◽  
X Ray Diffraction ◽  
Electrically Conductive ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Ft Ir

Bis-aldehyde monomers 4-(4′-formyl-phenoxy)benzaldehyde (3a), 3-methoxy-4-(4′-formyl-phenoxy)benzaldehyde (3b), and 3-ethoxy-4-(4′-formyl-phenoxy)benzaldehyde (3c) were synthesized by etherification of 4-fluorobenzaldehyde (1) with 4-hydroxybenzaldehyde (2a), 3-methoxy-4-hydroxybenzaldehyde (2b), and 3-ethoxy-4-hydroxybenzaldehyde (2c), respectively. Each monomer was polymerized with p-phenylenediamine and 4,4′-diaminodiphenyl ether to yield six poly(azomethine)s. Single crystal X-ray diffraction structures of 3b and 3c were determined. The structural characterization of the monomers and poly(azomethine)s was performed by FT-IR and NMR spectroscopic techniques and elemental analysis. Physicochemical properties of polymers were investigated by powder X-ray diffraction, thermogravimetric analysis (TGA), viscometry, UV–vis, spectroscopy and photoluminescence. These polymers were subjected to electrical conductivity measurements by the four-probe method, and their conductivities were found to be in the range 4.0 × 10−5 to 6.4 × 10−5 Scm−1, which was significantly higher than the values reported so far.

Study of Bactericidal Properties of Mg-Doped ZnO Nanoparticles

2015 ◽  
Vol 1804 ◽  
pp. 31-36 ◽  
Author(s):  
Melina Perez-Altamar ◽  
Hilary Marrero ◽  
Milton Martínez Julca ◽  
Oscar Perales Perez
Keyword(s):  
Infrared Spectroscopy ◽  
Zno Nanoparticles ◽  
Plate Count ◽  
Exciton Peak ◽  
X Ray Diffraction ◽  
Uv Spectrum ◽  
X Ray ◽  
Bactericidal Properties ◽  
Doped Zno ◽  
Mg Doped

ABSTRACTThe present work focuses on the polyol-mediated synthesis of pure and Mg-doped ZnO nanoparticles. The synthesized samples were characterized via X-ray diffraction, Fourier transformed infrared spectroscopy, ultraviolet visible spectroscopy and photoluminescence techniques. The Standard Plate Count was used to assess the bactericidal properties of the nanoparticles against E. coli at 1000 ppm and 1500 ppm of concentration. The capacity of the Zn-Mg oxides to generate singlet oxygen (SO) species was also evaluated. X-ray diffraction information evidenced the formation of ZnO-wurtzite; no diffraction peaks corresponding to isolated Mg-phases were detected. The average crystallite size of the Zn-Mg oxide nanocrystals was estimated in the 6nm - 7nm range. Infrared spectroscopy measurements confirmed the formation of the oxide with a Metal-Oxygen band centered on 536 cm-1; other bands associated to the functional groups of polyol by product were also observed. The exciton peak of UV spectrum suggests similarity in the particle size with the dopant addition. The effect of particle composition (i.e. doping level) on the corresponding generation of SO and bactericidal capacity is presented and discussed.

scholarly journals Facile Microemulsion Synthesis of Vanadium-Doped ZnO Nanoparticles to Analyze the Compositional, Optical, and Electronic Properties

Materials ◽  
2019 ◽  
Vol 12 (5) ◽  
pp. 821 ◽  
Author(s):  
H.S. Ali ◽  
Ali Alghamdi ◽  
G. Murtaza ◽  
H.S. Arif ◽  
Wasim Naeem ◽  
...  
Keyword(s):  
Zno Nanoparticles ◽  
Average Particle Size ◽  
Xrd Analysis ◽  
Attenuated Total Reflection ◽  
Lattice Parameters ◽  
Average Particle ◽  
Structural Morphology ◽  
Wurtzite Phase ◽  
X Ray ◽  
Doped Zno

In this work, microemulsion method has been followed to synthesize vanadium-doped Zn1−xVxO (with x = 0.0, 0.02, 0.04, 0.06, 0.08, and 0.10) nanoparticles. The prepared samples are characterized by several techniques to investigate the structural, morphology, electronic, functional bonding, and optical properties. X-ray diffractometer (XRD) analysis confirms the wurtzite phase of the undoped and V-doped ZnO nanoparticles. Variation in the lattice parameters ensures the incorporation of vanadium in the lattice of ZnO. Scanning electron microscopy (SEM) shows that by increasing contents of V ions, the average particle size increases gradually. X-ray Absorption Near Edge Spectroscopy (XANES) at the V L3,2 edge, oxygen K-edge, and Zn L3,2 edge reveals the presence and effect of vanadium contents in the Zn host lattice. Furthermore, the existence of chemical bonding and functional groups are also asserted by attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR). UV–Visible analysis shows that by increasing V+ contents, a reduction up to 2.92 eV in the energy band gap is observed, which is probably due to an increase in the free electron concentration and change in the lattice parameters.

Sign in / Sign up

Export Citation Format

Share Document