scholarly journals Thermal evolution of zinc interstitial related donors in high-quality NH_3-doped ZnO films

2017 ◽  
Vol 7 (2) ◽  
pp. 593 ◽  
Author(s):  
Kun Tang ◽  
Ran Gu ◽  
Shunming Zhu ◽  
Zhonghua Xu ◽  
Jiandong Ye ◽  
...  
2000 ◽  
Vol 376 (1-2) ◽  
pp. 99-109 ◽  
Author(s):  
M. Miki-Yoshida ◽  
F. Paraguay-Delgado ◽  
W. Estrada-López ◽  
E. Andrade

2018 ◽  
Vol 665 ◽  
pp. 109-116 ◽  
Author(s):  
Fanping Meng ◽  
Shou Peng ◽  
Genbao Xu ◽  
Yun Wang ◽  
Fangfang Ge ◽  
...  

2017 ◽  
Vol 7 (4) ◽  
pp. 1169 ◽  
Author(s):  
Kun Tang ◽  
Ran Gu ◽  
Shunming Zhu ◽  
Zhonghua Xu ◽  
Yang Shen ◽  
...  
Keyword(s):  

2014 ◽  
Vol 609-610 ◽  
pp. 113-117
Author(s):  
Ya Juan Sun ◽  
Wan Xing Wang

Since ZnO is a wide band gap (3.37 eV) semiconductor with a large exitonic binding energy (60 meV), it has been considered as a candidate for various applications, such as ultraviolet (UV) light emitting diodes and laser diodes. For the applications of ZnO-based optoelectronic devices, it is necessary to produce n and p type ZnO films with the high quality. Since ZnO is naturally n-type semiconductor material due to intrinsic defects, such as oxygen vacancies, zinc interstitials, etc., it is easy to produce n-type ZnO with high quality. However, it is difficult to produce low-resistive and stable p-type ZnO due to its asymmetric doping limitations and the self-compensation effects of the intrinsic defects. According to the theoretical studies, p-type ZnO can be realized using group-V dopants substituting for O, such as N, P and As. Among them, N has been suggested to be an effective acceptor dopant candidate to achieve p-type ZnO, because that nitrogen has a much smaller ionic size than P and As and the energy level of substitutional NOis lower than that of substitutional POand AsO.Transparent p-type ZnO: N thin films have been fabricated using the pulsed laser deposition method at deposition temperatures 800 °C under the O2and N2mixing pressure 6Pa. N-doped ZnO films were deposited on sapphire substrate using metallic zinc (99.999%) as target. The structural, optical and electrical properties of the films were examined by XRD, UV-visit spectra and Hall effect measurement. We found that thin film contain the hexagonal ZnO structure. The Hall effect measurement revealed that the carrier concentration is 5.84×10181/ cm3, and Hall mobility is 0.26 cm2/Vs, electrical resistivity is 4.12ohm-cm. Film thickness is 180nm. Besides, Visible light transmittance is more than 80%, and calculative band-gap is 3.1 eV, which is lower than ZnO.


2012 ◽  
Vol 2012 ◽  
pp. 1-4 ◽  
Author(s):  
Dewei Chu ◽  
Adnan Younis ◽  
Sean Li

High quality Co-doped ZnO films were prepared with electrodeposition. The correlation among the surface morphology, lattice structure, Co-dopant distribution, and resistance switching properties of the as-deposited films were investigated. It is found that resistance switching behaviour could be manipulated by controlling the composition of Co in the ZnO films. The significant enhancement of resistance switching was achieved with 5 at% Co doping in the films, and the possible switching mechanism was also discussed.


2018 ◽  
Author(s):  
Peter George Gordon ◽  
Goran Bacic ◽  
Gregory P. Lopinski ◽  
Sean Thomas Barry

Al-doped ZnO (AZO) is a promising earth-abundant alternative to Sn-doped In<sub>2</sub>O<sub>3</sub> (ITO) as an n-type transparent conductor for electronic and photovoltaic devices; AZO is also more straightforward to deposit by atomic layer deposition (ALD). The workfunction of this material is particularly important for the design of optoelectronic devices. We have deposited AZO films with resistivities as low as 1.1 x 10<sup>-3</sup> Ωcm by ALD using the industry-standard precursors trimethylaluminum (TMA), diethylzinc (DEZ), and water at 200<sup>◦</sup>C. These films were transparent and their elemental compositions showed reasonable agreement with the pulse program ratios. The workfunction of these films was measured using a scanning Kelvin Probe (sKP) to investigate the role of aluminum concentration. In addition, the workfunction of AZO films prepared by two different ALD recipes were compared: a “surface” recipe wherein the TMA was pulsed at the top of each repeating AZO stack, and a interlamellar recipe where the TMA pulse was introduced halfway through the stack. As aluminum doping increases, the surface recipe produces films with a consistently higher workfunction as compared to the interlamellar recipe. The resistivity of the surface recipe films show a minimum at a 1:16 Al:Zn atomic ratio and using an interlamellar recipe, minimum resistivity was seen at 1:19. The film thicknesses were characterized by ellipsometry, chemical composition by EDX, and resistivity by four-point probe.<br>


2013 ◽  
Vol 27 (10) ◽  
pp. 1112-1116 ◽  
Author(s):  
Ke-Wei SUN ◽  
Wan-Cheng ZHOU ◽  
Shan-Shan HUANG ◽  
Xiu-Feng TANG

Sign in / Sign up

Export Citation Format

Share Document