scholarly journals Performance of Saccharomyces cerevisiae Strains to Ferment Sugarcane Juice

2019 ◽  
Vol 31 (12) ◽  
pp. 2885-2890
Author(s):  
Pallavi S. Patil ◽  
Umesh B. Deshannavar
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Sugar Content ◽  
Soluble Solids ◽  
Alcohol Production ◽  
Total Sugar Content ◽  
Overall Acceptability ◽  
Titrable Acidity ◽  
Volatile Acidity ◽  
Physico Chemical ◽  
Total Alcohol

In the present study, four Saccharomyces cerevisiae strains S. cerevisiae (NCIM 3200), S. cerevisiae (NCIM 3045), S. cerevisiae (baker′s yeast) and S. cerevisiae (EC1118) have been used and compared for their capability to ferment sugars from the juice of sugarcane (of variety CO 86032) for production of sugarcane wine. The growth pattern of each strain was studied followed by the fermentation at optimized conditions such as pH and temperature. The strains′ potential to produce sugarcane wine has been compared in terms of their sugar consumption, alcohol production, titrable acidity and volatile acidity production with respect to permissible amounts given by Indian Regulations. Saccharomyces cerevisiae (EC1118) performed better in fermentation among other compared Saccharomyces strains at the optimum temperature of 28 ºC, optimum pH 5, total soluble solids of 18 ºBrix and total sugar content of 185 g/L. Analysis of sugarcane wine fermented by Saccharomyces cerevisiae (EC1118) has pH, 3.57, total alcohol content, 13.55 ± 1.77 %, titrable acidity, 8.30 ± 0.01 g/L and volatile acidity, 0.84 ± 0.00 g/L. The overall acceptability from sensory analysis supports the above physico-chemical analysis results of sugarcane wine.

Development of Ketchup from Sudanese Red karkade (Hibiscus sabdariffa L.) byproduct

Food Biology ◽  
1970 ◽  
pp. 19-23
Author(s):  
Nawal Abdel-Gayoum Abdel-Rahman
Keyword(s):  
Sensory Quality ◽  
Chemical Properties ◽  
Storage Period ◽  
Gum Arabic ◽  
Raw Material ◽  
Soluble Solids ◽  
Hibiscus Sabdariffa ◽  
Overall Acceptability ◽  
Physico Chemical ◽  
Tomato Ketchup

The aim of this study is to use of karkede (Hibiscus sabdariffa L.) byproduct as raw material to make ketchup instead of tomato. Ketchup is making of various pulps, but the best type made from tomatoes. Roselle having adequate amounts of macro and micro elements, and it is rich in source of anthocyanine. The ketchup made from pulped of waste of soaked karkede, and homogenized with starch, salt, sugar, ginger (Zingiber officinale), kusbara (Coriandrum sativum) and gum Arabic. Then processed and filled in glass bottles and stored at two different temperatures, ambient and refrigeration. The total solids, total soluble solids, pH, ash, total titratable acidity and vitamin C of ketchup were determined. As well as, total sugars, reducing sugars, colour density, and sodium chloride percentage were evaluated. The sensory quality of developed product was determined immediately and after processing, which included colour, taste, odour, consistency and overall acceptability. The suitability during storage included microbial growth, physico-chemical properties and sensory quality. The karkede ketchup was found free of contaminants throughout storage period at both storage temperatures. Physico-chemical properties were found to be significantly differences at p?0.05 level during storage. There were no differences between karkade ketchup and market tomato ketchup concerning odour, taste, odour, consistency and overall acceptability. These results are encouraging for use of roselle cycle as a raw material to make acceptable karkade ketchup.

scholarly journals Physico-chemical aspects of grape juices produced in the region of Campanha Gaucha, RS, Brazil (Southern Brazil)

2019 ◽  
Vol 12 ◽  
pp. 01018
Author(s):  
V.B. Costa ◽  
S.B. de Andrade ◽  
P.L.P.K. Lemos ◽  
A. Bender ◽  
C. Goulart ◽  
...  
Keyword(s):  
Grape Juice ◽  
Soluble Solids ◽  
Soluble Solids Content ◽  
Southern Brazil ◽  
Color Intensity ◽  
Volatile Acidity ◽  
Physico Chemical ◽  
Increasing Demand ◽  
Solids Content ◽  
Grape Juices

The Campanha Gaucha region, southern Brazil, has received significant investments in Viticulture during the last decades, especially for the production of quality wines. However, implementing the production of American and hybrid grapes in this region constitutes and opportunity to supply the increasing demand of the grape juice market in Brazil. Juices of two varieties, “Bordô” and “Concord”, from two locations, Dom Pedrito and Santana do Livramento, were analysed in terms of the following physico-chemical aspects: total city, volatile acidity, density, pH, soluble solids content, color intensity, and hue. “Bordô” juices presented higher total acidity and did not differ in relation to location. Higher volatile acidity was found in “Concord” juice from Santana do Livramento. Higher pH was found in the variety “Concord” and in the location Dom Pedrito. For this same location, the “Concord” grape juices showed higher soluble solids values. Color intensity was higher in Santana do Livramento. Color hue was higher in Dom Pedrito. Both variety and location impacted significantly on physico-chemical aspects of grape juices, although all the grapes were produced within the Campanha Gaucha region.

scholarly journals PHYSICO-CHEMICAL CHARACTERIZATION OF COCONUT ECOTYPES IN BENIN COASTAL ZONE

2021 ◽  
Vol 9 (8) ◽  
pp. 215-225
Author(s):  
Ulysse Ayihaou Daa-Kpode ◽  
Patrice Hodonou Avogbe ◽  
Gustave Djedatin ◽  
Daniel Datchiglo ◽  
Aristide Bakpe ◽  
...  
Keyword(s):  
Coastal Zone ◽  
Nutritional Value ◽  
Ph Value ◽  
Sugar Content ◽  
Soluble Sugar ◽  
Chemical Characterization ◽  
Titratable Acidity ◽  
Total Sugar Content ◽  
Physico Chemical

Coconut water is highly consumed for refreshment due to its nutritional value. However, its nutritional value varies according to the ecotype and stage of maturity of ecotype. In order to identify best ecotypes with high nutritious value, a physico-chemical composition of ten (10) ecotypes was performed at earlier stage of maturity (3 months). The measured parameters were: coconut height, mass of water, total sugar content, soluble sugar content, protein, titratable acidity and pH.  The obtained results showed that all parameters vary from one ecotype to another. All coconut ecotypes contain water slightly acid with a pH value less than 7.  Furthermore, there is no relationship between physical and biochemical parameters. However, within characterized ecotypes, Ecotype_2, appeared to have the best biochemical composition with a significant amount of water. This study provided important informations related to physico-chemical characteristics of coconuts ecotypes found in the coastal zone.

scholarly journals Effect of ethrel spray on the ripening behaviour of mango (Mangifera indica L.) variety 'Dashehari'

2017 ◽  
Vol 9 (3) ◽  
pp. 1619-1623 ◽  
Author(s):  
P. S. Gurjar ◽  
A.K. Verma ◽  
Abhay Dikshit ◽  
D. K. Shukla
Keyword(s):  
Mangifera Indica ◽  
Storage Period ◽  
Soluble Solids ◽  
Total Carotenoids ◽  
Yellow Colour ◽  
Temperature Changes ◽  
Titrable Acidity ◽  
Physico Chemical ◽  
Colour Development ◽  
Increasing Trends

An experiment was carried out to investigate the effect of post harvest spray of different concentrations (100, 200, 400, 600 and 800 ppm) of ethrel (2-chloroethyl phosphonic acid) on ripening and colour development in ‘Dashehari’ mango fruits harvested in second week of June, 2015. The treated fruits were assessed for physico-chemical parameters such as physiological loss in weight (%), firmness (Kg/cm2), TSS (°Brix), titrable acidity (%), total carotenoids (mg/100g) and peel chlorophyll (mg/100g) and observations were recorded at 2 days interval during 8 days storage at ambient temperature. Changes in total soluble solids (8.5 to 23.23° Brix), total carotenoids (0.807 to 7.12 mg/100g) and PLW (14.58%) showed increasing trends up to 8 days during storage whereas fruit firmness (8.5 to 0.68 Kg/cm2), titrable acidity (1.26 to 0.08%) and total peel chlorophyll (5.2 to 0.14 mg/100g) showed decreasing trends. At the end of the storage period for 8 days, Ethrel spray at 600 ppm induced uniform ripening with attractive yellow colour within 4 days while untreated control fruits failed to ripen uniformly and remain light green even after 8 days of storage. Ripening advances by 4 days in fruits sprayed with 600 ppm ethrel com-pared to unsprayed control fruits.

scholarly journals Change in chemical constituents and overall acceptability of frozen and dehydrated Aonla fruit pulp during storage

2016 ◽  
Vol 8 (3) ◽  
pp. 1615-1617
Author(s):  
Jyoti Prabha Bishnoi ◽  
Rakesh Gehlot ◽  
S. Siddiqui
Keyword(s):  
Chemical Constituents ◽  
Value Added ◽  
Storage Period ◽  
Sensory Attributes ◽  
Soluble Solids ◽  
Chemical Characteristics ◽  
Storage Duration ◽  
Overall Acceptability ◽  
Physico Chemical ◽  
Further Development

Ascorbic acid and total phenol in frozen aonla pulp on zero day of storage was found to be 365.5 mg/100g and 2.1 mg/g while in dehydrated aonla pulp it was 2.3 mg/100mg and 14.7 mg/g which was found to decrease with the increase in storage duration. However, significant increase (CD at 5% Level) in total soluble solids (TSS) and non-enzymatic browning was noticed with the advancement in storage duration. The decrease and increase in physico-chemical characteristics were more significant in dehydrated aonla pulp as compared to frozen aonla pulp. Mean score for sensory attributes of dehydrated aonla pulp at zero month of storage was fairly less than frozen aonla pulp. Moreover, there was more significant decrease in value of sensory attributes of dehydrated aonla pulp during six months storage period compared to frozen aonla pulp. Thus, present study was first in its kind to determine and compare chemical composition and overall acceptability of frozen and dehydrated aonla pulp obtained from aonla fruits cv. Chakaiya during storage for optimizing there use in further development of value added aonla product.

scholarly journals Genetic and Phenotypic Characterisation of a Saccharomyces cerevisiae Population of ‘Merwah’ White Wine

2019 ◽  
Vol 7 (11) ◽  
pp. 492 ◽  
Author(s):  
Nadine Feghali ◽  
Warren Albertin ◽  
Edouard Tabet ◽  
Ziad Rizk ◽  
Angela Bianco ◽  
...  
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Genetic Diversity ◽  
Alcoholic Fermentation ◽  
Sugar Content ◽  
Wine Yeast ◽  
Pilot Scale ◽  
White Wine ◽  
High Genetic Diversity ◽  
Volatile Acidity ◽  
Phenotypic Characterisation

The study of yeast biodiversity represents an important step in the preservation of the local heritage, and this work in particular has an innovative character since no further studies have investigated ‘Merwah’, one of the main grape varieties used in winemaking in Lebanon. To gain deeper knowledge of the genetic diversity and population structure of native Saccharomyces cerevisiae wine strains, 202 isolates were collected during spontaneous alcoholic fermentation of eight must/wine samples of cultivar ‘Merwah’, over two consecutive years (2016, 2017) in a traditional winery in Mount Lebanon (1400 m a.s.l.). The isolates were identified as S. cerevisiae on the basis of their morphology and preliminary sequence analysis of their internal transcribed spacer (ITS) PCR. They were then characterised at the strain level by interdelta PCR and genotyped using multiplex PCR reactions of 12 microsatellite markers. High genetic diversity was observed for the studied population. To select potential yeast starter strains from this population, micro-fermentations were carried out for 22 S. cerevisiae strains that were selected as representative of the ‘Merwah’ wine yeast population in order to determine their technological and oenological properties. Three indigenous yeast strains might represent candidates for pilot-scale fermentation in the winery, based on relevant features such as high fermentation vigour, low production of volatile acidity and H2S and low residual sugar content at the end of alcoholic fermentation.

scholarly journals Taste Panel Perception of Sweetness as it Correlates to Refractometer Measurements and HPLC Analysis of Sugar Content

HortScience ◽  
2004 ◽  
Vol 39 (4) ◽  
pp. 879A-879
Author(s):  
Teri Hale* ◽  
Richard Hassell ◽  
Tyron Phillips
Keyword(s):  
Hplc Analysis ◽  
Sweet Corn ◽  
Sugar Content ◽  
Total Sugar ◽  
Taste Panel ◽  
Soluble Solids ◽  
Early Maturity ◽  
Total Sugars ◽  
Total Sugar Content ◽  
Total Sugar Concentration

Taste panel perception and preference of sweetness in three phenotypes (su, se and sh2) of sweet corn harvested at three maturities (early, mature and late) were compared to refractometer measurements and HPLC analysis of fructose, sucrose, and glucose. Panelist rating of sweetness and acceptability significantly correlated with HPLC analysis. These correlations were found for sucrose and total sugars present (for sweetness, r2 = 0.70 and 0.61; acceptability, r2 = 0.64 and 0.55). Sucrose significantly correlated with the total sugars present (r2 = 0.95). The panelists' perception of flavor also correlated significantly with the amount of sucrose present and total sugars (r2 = 0.66 and 0.59, respectively). Sucrose content was significantly different between se, sh2 and su, with sh2 having the highest level. Taste panels indicated this difference but showed not significant differnece between se and sh2 acceptablity. Su was only acceptable to panelists at early maturity. °Brix did not reflect the taste panels scores and HPLC measurements postively. Soluble solids and taste panel scores were negatively correlated in both the panel's perception of sweetness and acceptability (r2 = -0.66 and -0.66, respectively) which indicates that as panel scores decreased °Brix increased. Comparison of soluble solids to HPLC analysis, indicate that °Brix was negatively correlated to sucrose and total sugar content, and that as soluble solids increased, the sucrose or total sugar concentration remained constant or decreased. Soluble solids measurements have been positively correlated with sucrose levels in other crops; but this was not the case with sweet corn.

scholarly journals Pectin Strength of Common Varieties of Plantain Peels Used in the Production of Jam/Marmalade

2020 ◽  
pp. 1-9
Author(s):  
O. M. Akusu ◽  
B. S. Chibor
Keyword(s):  
Crude Protein ◽  
Sugar Content ◽  
Chemical Properties ◽  
Carbohydrate Content ◽  
French Horn ◽  
Gelling Agent ◽  
Mean Values ◽  
Total Sugar Content ◽  
Overall Acceptability ◽  
Low Protein

The pectin strength of peels from four plantain cultivars; Horn Plantain (sample B), French Plantain (sample C), False horn Plantain (sample D), and French Horn Plantain (sample E) and its effect on Jam and Marmalade produced was investigated. Pectin was extracted from the plantain peels with distilled water and EDTA at pH 4.3 and 60°C, precipitated with acidified ethyl alcohol and 0.5N HCl. The pectin strength of peels from the French plantain (sample B) was higher than the others. Peels from False horn and French horn plantain both had medium pectin strength. Jam and marmalade produced were evaluated for proximate composition, chemical properties and acceptability. Jam and Marmalade from sample C were high in moisture content with mean values of 43.19 and 41.33%, respectively. Sample E (in both variants) had significant high crude protein (0.33%) compared to all other samples. Marmalade samples had crude fiber values ranging from 0.75% for sample B to 2.25% for sample E. The ash and carbohydrate content of jam and marmalade produced with pectin from French Plantain, False Horn Plantain and French Horn Plantain were significantly higher than the commercial jam and marmalade. Crude fat ranged from 0.45 to 1.15% for both variants (jam and marmalade). They both recorded low protein contents ranging from 0.14 to 0.32% and 0.16 to 0.33% respectively but high carbohydrate content ranging from 50.97 to 67.48% and 52.29 to 69.41% respectively. pH content maintains 3.0-3.10% for all samples. Total sugar content ranged from 55.00 to 63.80% for both Jam and Marmalade. Sample C was most preferred in terms of colour, taste, aroma, appearance, spreadability and overall acceptability, for Jam and Marmalade. All its sensory attributes were compared favorably with the commercial brands. Pectin extracted from plantain peel is strongly recommended for use as gelling agent in Jam and Marmalade production.

scholarly journals Studies on Physio-Chemical Properties of Value Added Herbal Papaya (Carica papaya L.) Candy

2020 ◽  
pp. 95-101
Author(s):  
Konche Jahnavi ◽  
Saket Mishra
Keyword(s):  
Carica Papaya ◽  
Block Design ◽  
Chemical Properties ◽  
Value Added ◽  
Soluble Solids ◽  
Cost Ratio ◽  
Overall Acceptability ◽  
Titrable Acidity ◽  
Lemon Grass ◽  
Randomized Block Design

A field experiment was conducted during year 2019-2020 at the Post Harvest Laboratory of Horticulture Department, Naini Agricultural Institute, Sam Higginbottom University of Agriculture, Technology & Sciences, Prayagraj to study “Studies on physio-chemical properties of value added herbal papaya (Carica papaya L.) candy”. The experiment was conducted in Randomized Block Design with ten treatments, replicated thrice. Total number of treatments were ten viz. (T0 (Control)- 70% sugar), (T1-Raw papaya + 70% sugar + 0.5% tulsi),( T2 -Raw papaya + 70% sugar + 1.0% tulsi), (T3 -Raw papaya + 70% sugar +1.5% tulsi), (T4 -Raw papaya + 70% sugar + 0.5% cardamom), (T5 -Raw papaya + 70 % sugar + 1.0% cardamom), (T6 -Raw papaya + 70 % sugar + 1.5% cardamom), (T7 -Raw papaya + 70% sugar + 0.5% lemon grass), (T8 -Raw papaya + 70% sugar + 1.0% lemon grass) and (T9 -Raw papaya +70% sugar + 1.5% lemon grass). The treatment T6 (Raw papaya + 70 % sugar + 1.5% cardamom) was found superior in respect of parameters like total soluble solids (85.78 °Brix), Titrable acidity (1.29), PH (5.05), flavour score (9.00), taste score (9.00) and overall acceptability score (8.50). Benfit-cost Ratio was found highest (1.64) in the treatments (T1 - Raw papaya + 70% sugar + 0.5% tulsi), (T2 - Raw papaya + 70% sugar + 1.0% tulsi), (T3 - Raw papaya + 70% sugar +1.5% tulsi) and (T7 -Raw papaya + 70% sugar + 0.5% lemon grass).

scholarly journals Physico-chemical and sensory properties of a cheese-like product from the blend of soymilk and almond milk

Agrosearch ◽  
2020 ◽  
Vol 19 (2) ◽  
pp. 54-63
Author(s):  
A.K. Arise ◽  
D.O. Opaleke ◽  
K.O. Salami ◽  
G.V. Awolola ◽  
D.F. Akinboro
Keyword(s):  
Total Solid ◽  
Sensory Properties ◽  
Partial Substitution ◽  
Soy Milk ◽  
Alternative Source ◽  
Overall Acceptability ◽  
Titrable Acidity ◽  
Physico Chemical ◽  
Significant Difference ◽  
Product Control

In this study, the possibility of producing a cheese-like product from the partial substitution of soy milk with almond milk was investigated. The extracted almond milk was mixed with soy milk in a variable proportion of 10:90, 20:80, 30:70, 40:60, 50:50, and the control is soya milk alone (0:100) to produce a cheese-like product. Control and partially substituted cheese-like samples were stored in a refrigerator at a temperature of 4oC and examined for proximate, total titrable acidity, pH, total solid and sensory properties. The total titrable acidity of the cheese was between 0.23% and 0.33%, representing a significant increase in total titrable acidity from 0.23% to 0.33%. The pH increased with increase in the almond milk in the cheese, which varied between 6.45 and 6.90. The proximate composition ranged from 25.67%-29.97% for protein, 22.79%-26.45% for moisture, 30.58%-36.99% for fat, 7.02%-14.61% for carbohydrate, 1.20%-1.79% for ash, and 0.90%-2.03% for fibre. Protein and fat contents increased with increase in almond milk substitution, while carbohydrate and ash content decrease with increasing almond milk substitution. Sensory evaluation revealed a significant difference (p <0.05) in colour, taste, texture and overall acceptability, influenced by the varying proportions of added almond milk. However, there is no significant difference in aroma. The blend with 30% almond milk and 70% soy milk was most acceptable to panelists. The study showed the potential of almond milk as an alternative source of milk in cheese making with improved nutritional value and increased acceptability for the consumer. Keywords: Cheese-like product, Soy-almond Cheese-like, Soy milk, Almond milk

Sign in / Sign up

Export Citation Format

Share Document