scholarly journals O Physico-chemical properties of mango pulp and cajarana blends

2020 ◽  
Vol 11 ◽  
pp. e3403
Author(s):  
Luis Paulo Firmino Romao da Silva ◽  
Alexandre Jose de Melo Queiroz ◽  
Adolfo Pinheiro de Oliveira ◽  
Rossana Maria Feitosa de Figueirêdo ◽  
Maria Suiane de Moraes ◽  
...  
Keyword(s):  
Ascorbic Acid ◽  
Moisture Content ◽  
Antioxidant Properties ◽  
Chemical Properties ◽  
Titratable Acidity ◽  
Well Being ◽  
Soluble Solids ◽  
Color Parameters ◽  
Total Titratable Acidity ◽  
Mango Pulp

The mango and cajarana are pleasant-tasting fruits, yellow in color, have ascorbic acid with antioxidant properties that slow down oxidation and help the immune system to promote well-being. The production of blends can improve nutritional and sensory characteristics, combining macro and micronutrients that may be present in a higher concentration in one fruit and deficient in another, increasing the possibility of obtaining new flavors constituting a new product. The study had as objective the elaboration of blends of mango cv. espada and cajarana and to determine the physical-chemical characteristics and color parameters. Three formulations were prepared: F1 - 50% mango pulp and 50% cajarana pulp; F2 - 90% mango pulp and 10% cajarana pulp and F3 - 10% mango pulp and 90% cajarana pulp. The formulations were evaluated for physicochemical parameters of water activity, moisture content, ash, total soluble solids, pH, total titratable acidity, ascorbic acid, proteins, lipids, total sugars, reducers, non-reducers and color parameters. The data obtained were submitted to analysis of variance and comparison between means by the Tukey test. The blends caused significant changes in most of the parameters evaluated, with an increase in the moisture content, ash, total titratable acidity, proteins and lipids as the concentration of the cajarana pulp was increased. The increase in the proportion of mango pulp favored the achievement of lighter blends, with a predominance of yellowness. However, the development of blends from this study presents itself as a viable alternative for the use of fruit pulps, both in terms of nutrition, complementing the nutrient content through this mixture as a very promising product for the market.

scholarly journals Parâmetros físico-químicos de polpas de fruta produzidas na cidade de Petrolina – PE

2015 ◽  
Vol 10 (4) ◽  
pp. 01 ◽  
Author(s):  
A. C. Honorato ◽  
C. B. R. Dias ◽  
E. B. Souza ◽  
I. R. B. Carvalho ◽  
K. S. M. Sousa
Keyword(s):  
Ascorbic Acid ◽  
Physicochemical Parameters ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Chemical Characteristics ◽  
Fruit Pulp ◽  
Total Titratable Acidity ◽  
Physical And Chemical ◽  
The City

<p>Este trabalho teve como objetivo avaliar os parâmetros físico-químicos de polpas de fruta produzidas e comercializadas na cidade de Petrolina-PE, tendo como referência a Instrução Normativa nº 1, de 7 jan. 2000, do Ministério da Agricultura que define as características físicas e químicas estabelecendo limites mínimos e máximos específicos para cada polpa de fruta. Foram avaliadas duas marcas (1 e 2) de polpas de abacaxi, cacau, caju, graviola, maracujá e umbu, analisadas quanto aos parâmetros de pH, sólidos solúveis totais (SST), acidez total titulável (ATT), ácido ascórbico, relação SST/ATT e sólidos totais. Os resultados permitem inferir que a marca 2 apresentou qualidade superior na maioria dos parâmetros avaliados quando comparado com a marca 1. Entretanto para alguns sabores de polpa as duas marcas não atenderam os valores padrões. Entre as polpas o único sabor que apresentou os padrões exigidos foi a polpa de caju em ambas as marcas, e a que apresentou resultado de pior qualidade diante dos padrões foi a polpa de maracujá principalmente da marca 1. Dessa forma constata-se que há grandes variações entre as marcas, e entre alguns parâmetros, o que compromete a qualidade das polpas, prejudicando assim o consumidor.</p><p align="center"><strong><em>Physicochemical parameters of fruit pulps produced in Petrolina – PE</em></strong></p><p><strong>Abstract</strong><strong>: </strong>This study aimed to evaluate the physicochemical parameters of fruit pulps produced and marketed in the city of Petrolina-PE, with reference to the Instruction Nº 1 of 7 January 2000 of the Ministry of Agriculture, which defines the physical and chemical characteristics setting minimum and maximum limits specific to each fruit pulp. We evaluated two brands (1 and 2) of pineapple, cocoa, cashew, soursop, passion and umbu fruit pulp, analyzed for pH, total soluble solids (TSS), total titratable acidity (TTA), ascorbic acid, TSS / TTA and total solids parameters. Results show that the brand 2 showed superior in most evaluated parameters when compared to the brand 1. However, for some pulp flavors of both brands did not reached the standards values. Among the pulps, the only flavor that presented the required standards was the cashew pulp in both brands, and presented the results of lower quality on the standards was the passion fruit pulp mainly brand 1. Thus, it appears that there are great variations between brands and between some parameters, which compromises the quality of the pulp, thus impairing the consumer.</p>

Physico-chemical evaluation of Apple (Malus domestica Borkh.) cultivars grown in mid hills of North India

2019 ◽  
Vol 3 (02) ◽  
pp. 176-184
Author(s):  
Amit Kotiyal ◽  
Siddharth Shankar Bhatt ◽  
Jitendra Kumar ◽  
Dinesh Chandra Dimri ◽  
Narender Singh Mehta
Keyword(s):  
Ascorbic Acid ◽  
Fruit Size ◽  
Chemical Properties ◽  
Ascorbic Acid Content ◽  
Titratable Acidity ◽  
Fruit Weight ◽  
Soluble Solids ◽  
North India ◽  
Physico Chemical ◽  
Apple Cultivars

The objective of this study was to compare the physico-chemical properties of 10 apple cultivars grown in mid hills of India. Fruit weight, volume, size, total soluble solids (T.S.S.), total sugars, titratable acidity and ascorbic acid content were measured in the cultivars Aurora, Brookfield, Braeburn, Galaxy, Azetec, Scarlet Gala, Marini Red, Jonagold, Royal Gala and Royal Delicious. The results showed significant differences in physico-chemical attributes of apple cultivars. Among all the cultivars the maximum fruit size (50.66 mm length, 74.73 mm diameter) and fruit weight (170.12 g) were observed in cv. Royal Delicious, while the minimum fruit size (40.52 mm length, 53.03 mm diameter) and weight (110.97 g) were measured in Azetec and Aurora, respectively. The highest volume (196.79 ml) of fruit was registered in Royal Delicious in comparison to the minimum (125.75 ml) in Aurora. The maximum T.S.S. (14.27 °B) and acidity (0.717%) was noticed in Scarlet Gala and Marini Red, respectively. While the minimum T.S.S. and acidity was observed in Marini Red (11.20 °B) and Azetec (0.186%). The ascorbic acid varied from 6.07 mg/100 g in Royal Gala to 9.86 mg/100 g in Braeburn, whereas the total sugar ranged 11.36% in Royal Gala to 7.06% in Jonagold.

scholarly journals The impact of gamma irradiation and storage on the physicochemical properties of tomato fruits in Ghana

2020 ◽  
Vol 4 (3) ◽  
pp. 151-157
Author(s):  
Linda A Gyimah ◽  
Harry M Amoatey ◽  
Rose Boatin ◽  
Victoria Appiah ◽  
Bernard T Odai
Keyword(s):  
Weight Loss ◽  
Moisture Content ◽  
Physicochemical Properties ◽  
Gamma Irradiation ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Tomato Fruits ◽  
Total Soluble Solids ◽  
Total Titratable Acidity ◽  
Storage Temperatures

Abstract Objectives Tomato is a popular fruit that makes significant contributions to human nutrition for its content of sugars, acids, vitamins, minerals, lycopene, and other constituents. The fruit, however, has a short shelf life due to its climacteric nature. In view of this, an experiment was conducted to determine the effect of postharvest treatment on the physicochemical properties of fresh tomato fruits. Materials and Methods Freshly harvested tomato fruits were subjected to 0, 1, 2, 3, and 4 kGy gamma radiation and stored at 10 ± 1°C and 28 ± 1°C. Parameters analysed during the study include pH, total titratable acidity, weight loss, total solids, and moisture content of the sample. Results At both storage temperatures, results of the analyses were in the range of 2.80%–38.67% for weight loss, 0.23%–0.51% for total titratable acidity, 3.5%–5.0% for total soluble solids, 94.43%–96.53% for moisture content, and pH was generally low in the samples stored at 10 ± 1°C. Generally, gamma irradiation had an effect on the total soluble solids, total titratable acids, pH values, and moisture content and physiological weight loss at both storage temperatures. Conclusion From the study, storing Burkina variety at a low temperature preserves the tomato fruits better than storing them at ambient temperature.

Use of sodium metabisulfite and ascorbic acid as anti-browning agents in processed potatoes

2019 ◽  
Vol 122 (2) ◽  
pp. 380-389 ◽  
Author(s):  
Revenli Fernanda do Nascimento ◽  
Maria Helene Giovanetti Canteri
Keyword(s):  
Ascorbic Acid ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Sodium Metabisulfite ◽  
Browning Index ◽  
Content Type ◽  
Chemical Treatments ◽  
Chemical Agents ◽  
Total Titratable Acidity ◽  
Processed Potatoes

Purpose The purpose of this paper is to evaluate the use of sodium metabisulfite (SMB) and ascorbic acid (AA) either alone or in combination as anti-browning agents in industrially processed potatoes. Design/methodology/approach The experiment was carried out in the production line of an agricultural industry located in the state of Paraná, Brazil, testing the following chemical treatments in the immersion process of the potatoes: T1 (control, without additives), T2 (0.5 percent AA), T3 (0.5 percent SMB), T4 (0.5 percent SMB + 0.5 percent AA) and T5 (0.25 percent SMB + 0.25 percent AA). The statistical significance of the difference between chemical treatments (T1, T2, T3, T4 and T5) and storage periods (1, 5, 10 and 15 days) was evaluated by one-way analysis of variance (ANOVA). Additionally, multifactorial ANOVA was carried out in a 22 factorial experimental design with 3 central points to estimate the influence of independent variables on the results. The analyses performed on the samples of the different treatments were total soluble solids content, pH, total titratable acidity, instrumental color and browning index. Findings The tested antioxidants did not affect the content of total soluble solids and total titratable acidity but significantly influenced the pH, color and browning index. The treatment T3, containing only SMB (0.5 percent m/v), and the treatment T5, a combination of SMB (0.25 percent m/v) and AA (0.25 percent m/v), were the most effective in the controlling the browning reaction. In these treatments, the formation of brown color in potatoes after cooked was significantly reduced (p<0.05) using relatively lower concentration of antioxidants. Originality/value The novelty of the research is focused on reducing the use of chemical agents to control the browning of the processed potatoes (peeled, steamed, sterilized and vacuum packed) ready for consumption and widely marketed. During processing of this commercial potato, the tissue damage caused by mechanical processes, as well as the heat treatment employed during cooking, induces the development of enzymatic and non-enzymatic browning reactions. Thus, it is necessary to investigate the influence of industrially employed chemical agents in order to maintain the quality of this product, with stable color and the lowest possible concentration of additives. The reduction of chemical additives offers viable solutions to many of the problems the Sustainable Development Goals are meant to tackle, as they ensure healthy lives, availability and sustainable management of water and promote inclusive and sustainable industrialization.

scholarly journals Postharvest mechanical damage affects fruit quality of 'Montenegrina' and 'Rainha' tangerines

2009 ◽  
Vol 44 (12) ◽  
pp. 1636-1640 ◽  
Author(s):  
Cândida Raquel Scherrer Montero ◽  
Lígia Loss Schwarz ◽  
Liege Cunha dos Santos ◽  
Cristiane Salete Andreazza ◽  
Carolina Pereira Kechinski ◽  
...  
Keyword(s):  
Ascorbic Acid ◽  
Mechanical Damage ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Internal Quality ◽  
Color Changes ◽  
Randomized Design ◽  
Total Titratable Acidity ◽  
Completely Randomized Design

The objective of this work was to evaluate the visual and chemical quality of tangerines after mechanical damage by impacts. The tangerine cultivars Montenegrina and Rainha were submitted to different degrees of impact and evaluated for decay and oleocellosis, loss of fresh weight, total soluble solids, total titratable acidity and ascorbic acid degradation, as well as for epicarp color changes. Experiments with three replicates and experimental units of six fruit for each cultivar were done in a completely randomized design. Impact produced qualitative internal and minor external changes on tangerines. The main modifications produced by impact on the fruit were losses of citric acid and soluble solids, which increased the solid:acid ratio, and losses of ascorbic acid. 'Montenegrina' tangerines are more susceptible to internal quality damage than 'Rainha'.

scholarly journals Elaboration of Blends of Pitaya Pulps With Acerola

2021 ◽  
Vol 13 (3) ◽  
pp. 53
Author(s):  
Maria S. de Moraes ◽  
Rossana Maria Feitosa de Figueirêdo ◽  
Alexandre J. de M. Queiroz ◽  
Luís P. F. R da Silva ◽  
Mailson G. Gonçalves ◽  
...  
Keyword(s):  
Ascorbic Acid ◽  
Water Content ◽  
Water Activity ◽  
Economic Value ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Colorimetric Analysis ◽  
Physical Chemical ◽  
Total Titratable Acidity ◽  
Hue Angle

Pitaya and acerola are fruits rich in nutrients and can be used in blends formulation in order to improve the sensory characteristics of both pulps in isolation and complement each other in terms of nutritional aspects. Thus, the aim of this research was to develop different blends of pitaya pulp with acerola and choose the best formulation based on physical-chemical and colorimetric characteristics. Three blends formulations were prepared: F1-90% pitaya and 10% acerola; F2-70% pitaya and 30% acerola; and F3-50% pitaya and 50% acerola. The formulations were evaluated for physical-chemical parameters of water activity, water content, ash, total soluble solids (SST), pH, total titratable acidity (ATT), SST/ATT ratio, ascorbic acid, proteins, lipids, sugars totals, reducers and non-reducers and colorimetric analysis. The obtained data were subjected to variance analysis (ANOVA) and to comparison between means by the Tukey test at 5% probability. The formulation F1 stood out when compared to the others. The parameters pH, soluble solids, ratio SS/ATT, ash, water content, water activity, proteins, sugars, luminosity and hue angle were the ones that gave the formulation F1 the best results. However, it is noteworthy that the formulation F3 presented a greater amount of ascorbic acid and higher values of a, b and chroma in the colorimetric analysis. The use of these fruits allows to obtain an innovative product with excellent nutritional and functional characteristics. The blend is a viable alternative for the use of perishable and seasonal fruits, adding greater economic value to the very promising product to the market.

Characterization and Correlation Analysis of Physical and Physico-Chemical Properties of Cambucá Fruits (Plinia edulis)

2019 ◽  
pp. 1-9
Author(s):  
Antônio Gustavo de Luna Souto ◽  
Maria Helena Menezes Cordeiro ◽  
João Paulo Gava Cremasco ◽  
Valtânia Xavier Nunes ◽  
Keise Barcelas Morais ◽  
...  
Keyword(s):  
Ascorbic Acid ◽  
Chemical Properties ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Pulp Yield ◽  
Transverse Diameter ◽  
Average Mass ◽  
Fruit Species ◽  
Physico Chemical ◽  
Yellow Orange

Aims: This study was to characterize and correlate physical and physico-chemical properties of cambucá fruits (Plinia edulis). Study Design: Experimental design was completely randomized with fifteen samples of five fruits each. Place and Duration of Study: Experimental orchard of the Department of Plant Science, Federal University of Viçosa (UFV), located in the municipality of Viçosa, Zona da Mata of Minas Gerais during the month of February 2015. Methodology: Fruits were sampled when 100% of peels presented yellow-orange color. The following characteristics were evaluated: longitudinal and transverse diameter, total mass of both pulp and seed, pulp color, soluble solids, titratable acidity, soluble solids/titratable acidity ratio, ascorbic acid and carotenoids contents. To verify the degree of correlation between two physico-chemical variables, a Pearson analysis was performed. Results: Cambucá fruits showed average values of longitudinal and transverse diameter of 37.76 and 44.36 mm, respectively. Fruits’ average mass were 44.12 g and the percentage of pulp was 82.15%. Both soluble solids and titratable acidity presented the respective average values: 10.53 ºBrix, 1.34 mg of citric acid and 100 mL-1 of pulp. Larger cambucá fruits presented higher pulp yield and lower acidity. The increase in ascorbic acid was positively correlated with the contents of soluble solids and carotenoids. Conclusion: Fruits of cambucá have potential for commercialization, their characteristics are similar to those found in other fruit species native to the Myrtaceae family and already found in the fruit market.

scholarly journals Hygroscopic trend of lyophilized ‘mangaba’ pulp powder

2017 ◽  
Vol 21 (5) ◽  
pp. 356-360
Author(s):  
Juliana Conegero ◽  
Luciana C. Ribeiro ◽  
Antonio R. G. Monteiro ◽  
José M. C. da Costa
Keyword(s):  
Ascorbic Acid ◽  
Water Activity ◽  
Adsorption Isotherms ◽  
Chemical Properties ◽  
Ascorbic Acid Content ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Physico Chemical ◽  
Soluble Solid ◽  
Amorphous Powders

ABSTRACT Mangaba is a widely-consumed fruit in the Northeast of Brazil, which is usually exploited through extractivism. This fruit is rich in various nutrients, especially in vitamin C, with pleasant taste and aroma. The lyophilization process transforms these fruits into amorphous powders, which must be analyzed regarding their properties and hygroscopic trend. Thus, the objective of this study was to characterize and evaluate the physico-chemical properties of adsorption isotherms of the lyophilized ‘mangaba’ pulp powder, with addition of maltodextrin (DE 20). The pH, titratable acidity, soluble solids, ascorbic acid and water activity were analyzed. Regarding the isotherms, the mathematical models of GAB, BET, Oswin, and Henderson were used at temperatures of 25, 30, 35 and 40 °C. The obtained powder presented pH of 3.14, titratable acidity of 1.95 mg of citric acid 100g-1 of powder, soluble solid contents of 99 ºBrix, ascorbic acid content of 55.97 mg 100g-1 and water activity of 0.16. Henderson was the mathematical model that best fitted the data of the adsorption isotherms at the four evaluated temperatures, with average errors ranging from 5.76 to 9.70% and R2 from 0.9974 to 0.9995.

scholarly journals Effect of Selenium Biofortification and Beneficial Microorganism Inoculation on Yield, Quality and Antioxidant Properties of Shallot Bulbs

Plants ◽  
2019 ◽  
Vol 8 (4) ◽  
pp. 102 ◽  
Author(s):  
Golubkina ◽  
Zamana ◽  
Seredin ◽  
Poluboyarinov ◽  
Sokolov ◽  
...  
Keyword(s):  
Ascorbic Acid ◽  
Antioxidant Properties ◽  
Environmentally Friendly ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Sodium Selenate ◽  
Selenium Content ◽  
Total Sugars ◽  
Yield Quality ◽  
Amf Inoculation

Plant biofortification with selenium in interaction with the application of an arbuscular mycorrhizal fungi (AMF)-based formulate,with the goal of enhancing Se bioavailability, is beneficial for the development of the environmentally friendly production of functional food with a high content of this microelement. Research was carried out in order to assess the effects of an AMF-based formulate and a non-inoculated control in factorial combination with two selenium treatments with an organic (selenocystine) or inorganic form (sodium selenate) and a non-treated control on the yield, quality, antioxidant properties, and elemental composition of shallot (Allium cepa L. Aggregatum group). Selenocystine showed the best effect on the growth and yield of mycorrhized plants, whereas sodium selenate was the most effective on the non-inoculated plants. The soluble solids, total sugars, monosaccharides, titratable acidity, and proteins attained higher values upon AMF inoculation. Sodium selenate resulted in higher soluble solids, total sugars and monosaccharide content, and titratable acidity than the non-treated control, and it also resulted in higher monosaccharides when compared to selenocystine; the latter showed higher protein content than the control. Calcium, Na, S, and Cl bulb concentrations were higher in the plants inoculated with the beneficial microorganisms. Calcium and sodium concentrations were higher in the bulbs of plants treated with both the selenium forms than in the control. Selenocystine-treated plants showed enhanced accumulation of sulfur and chlorine compared to the untreated plants. The AMF inoculation increased the bulb selenium content by 530%, and the Se biofortification with selenocystine and sodium selenate increased this value by 36% and 21%, respectively, compared to control plants. The AMF-based formulate led to increases in ascorbic acid and antioxidant activity when compared to the non-inoculated control. The bulb ascorbic acid was increased by fortification with both selenium forms when compared to the non-treated control. The results of our investigation showed that both AMF and selenium application represent environmentally friendly strategies to enhance the overall yield and quality performances of shallot bulbs, as well as their selenium content.

scholarly journals Physico-chemical and Functional Properties of Two Jackfruit (Artocarpus heterophyllus Lam.) Varieties in Eastern Visayas, Philippines

2017 ◽  
pp. 100-106 ◽  
Author(s):  
Lorina Galvez ◽  
Erlinda Dizon
Keyword(s):  
Functional Properties ◽  
Total Phenolics ◽  
Chemical Properties ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Tannin Content ◽  
Physico Chemical ◽  
Total Titratable Acidity ◽  
Physical And Chemical ◽  
And Chemical Properties

Quality is a wide-ranging concept determined by many factors. It is a composite of those physical and chemical properties of the material which govern its acceptability and processing suitability. This study aimed to determine the physico-chemical and functional properties of the two jackfruit varieties (EVIARC Sweet and AES-2) grown in Eastern Visayas, Philippines. Fresh ripe jackfruit varieties were subjected to physico-chemical properties and functional component analyses following standard protocols. The two jackfruit varieties were found to have the following properties: the pH were 4.80 and 5.50; total soluble solids (TSS), 24.00 and 22.60oB; total titratable acidity (TTA), 0.33% and 0.12% citric acid; moisture content (MC), 77.30% and 75.96% (wb); total phenolics (TP), 127.73 and 125.91mg CE/100g; tannin content (TC),127.73 and 208.72 mg VE/100g; total reducing sugar (TRS), 15.43% and14.38%; total sulfur (TS), 0.36 and 0.57ppm; and antioxidant activity (AOA), 39.55 and 52.35% LP (lipid peroxidation) for EVIARC sweet and AES-2, respectively. Variety significantly affects the pH, TSS, TTA, %MC, TC, TRS, TS and AOA. Non-significance was noted on their TP contents.

Sign in / Sign up

Export Citation Format

Share Document