scholarly journals Environmentally Friendly Techniques for Wool Dyeing Process

2015 ◽  
Vol 23 (2) ◽  
pp. 65-76 ◽  
Author(s):  
Simona Antighin ◽  
Laura Chirila ◽  
Alina Popescu
Keyword(s):  
Heavy Metal Concentration ◽  
Organic Content ◽  
Point Of View ◽  
Wool Fiber ◽  
Acid Dyes ◽  
Dyeing Process ◽  
Zinc Salts ◽  
Iron Nickel ◽  
Wool Dyeing

Abstract The aim of this research was to evaluate the influence of dyeing process on the quality of surface waters contaminated with heavy metals and organic compounds, resulted after the wool dyeing process. In order to mark out this aspects an environment friendly method was proposed which involves dyeing wool fiber with new complex combinations derived from a new acid dyes which were complexed, using copper, iron, nickel and zinc salts at 2:1 combination ratio. In order to point out the environmental point of view of wastewaters an experimental protocol was tested by dyeing wool fiber at different pH. Evaluation of complexed combinations impact on the environment involve the following indicators: consumption degree of dyeing solution from the process bath, treatment degree related to the organic content expressed by COD indicator and treatment degree related to the heavy metal concentration respectively.

Study on the Dyeing Behavior of Wool Fiber Treated with Nano-SiO2/Ag Antibacterial Agent

2011 ◽  
Vol 332-334 ◽  
pp. 27-30 ◽  
Author(s):  
Mei Niu ◽  
Zi Lu Wu ◽  
Jin Ming Dai ◽  
Wen Sheng Hou ◽  
Sheng Shi ◽  
...  
Keyword(s):  
Low Temperature ◽  
Antibacterial Agent ◽  
Important Influence ◽  
Wool Fiber ◽  
Experimental Results ◽  
Ultrasonic Frequency ◽  
Acid Dyes ◽  
Nano Sio2 ◽  
Dyeing Process ◽  
The Impact

Wool fiber was firstly pretreated by nano-SiO2/Ag antibacterial agent, and then dyed with an acid dyes at low temperature by ultrasonic dyeing. Many factors had an important influence on the dye ability and the antibacterial behavior during the dyeing process of antibacterial wool fiber. The experimental results indicate that the dye-takeup rates of antibacterial wool fiber were enhanced with the increase of the concentration of nano-SiO2/Ag, the dyeing temperature, the dyeing time and the ultrasonic frequency (less than 60Hz). However, the antibacterial ratios of wool fiber were declined in the impact of these factors other than the concentration of antibacterial agent.

scholarly journals Influence of protease on dyeing of wool with acid dyes

2011 ◽  
Vol 9 (1) ◽  
pp. 157-164 ◽  
Author(s):  
Monica Periolatto ◽  
Franco Ferrero ◽  
Mirco Giansetti ◽  
Raffaella Mossotti ◽  
Riccardo Innocenti
Keyword(s):  
Acid Dyes ◽  
Enzymatic Pretreatment ◽  
Fiber Damage ◽  
Dyeing Process ◽  
Finishing Process ◽  
Sds Page ◽  
Research Goal ◽  
Wool Dyeing ◽  
Leveling Agent ◽  
Section Analysis

AbstractThe application of enzymes in the wool dyeing process is an important research goal in order to reduce the environmental impact and costs of this finishing process. The work has focused on the possibility of reducing the temperature of conventional dyeing, using an enzymatic pretreatment with a neutral protease to improve the diffusion of the dye into the fibers. After the identification of the optimal dyeing process, the study goes on transferring the method to an industrial application. For this reason the influence of a leveling agent added to the dyeing bath was considered and further tests with an industrial dyeing recipe were performed. In order to evaluate possible fiber damage, samples treated with enzyme were observed by scanning electron microscopy (SEM) and analyzed by gel electrophoresis (SDS-PAGE). Moreover, the variation of tensile strength and elongation of dyed samples were determined. In addition, color fastness to domestic laundering, perspiration and rubbing were carried out. Finally, color measurements and fiber section analysis were performed. The results show the possibility, thanks to the pretreatment with the investigated enzyme, to obtain a homogeneous and solid dyeing on fibers maintaining good mechanical properties, already working at 85°C instead of 98°C currently used in industry.

Large Unilamellar Vesicle Liposomes for Wool Dyeing: Stability of Dye-Liposome Systems and Their Application on Untreated Wool

1992 ◽  
Vol 62 (7) ◽  
pp. 406-413 ◽  
Author(s):  
A. de la Maza ◽  
J. L. Parra ◽  
P. Bosch ◽  
L. Coderch
Keyword(s):  
Dye Adsorption ◽  
Acid Dyes ◽  
Large Unilamellar Vesicle ◽  
Dyeing Process ◽  
Wool Fibers ◽  
Physicochemical Stability ◽  
The Mean ◽  
Wool Dyeing ◽  
Hydrolysis Of ◽  
Acid Blue

Studies are described involving the use of large unilamellar liposomes (LUV) as carriers of dyes to untreated wool. To this end, we investigated liposomes made with egg phosphatidylcholine and containing the commercial acid dyes Polar red B (Ciba-Geigy), CI acid red 249, or Polar blue 6B, CI acid blue 83. We first studied the physicochemical stability of liposomes by measuring the mean particle size distribution of phospholipid vesicles after preparation and during the dyeing process, and we also investigated the possible hydrolysis of phospholipid molecules, studying the alteration of fatty acids built up on the liposomic structures. We then investigated the kinetic aspects of dye adsorption and bonding on untreated wool samples by means of LUV liposomes at different lipid concentrations. This process leads to an inhibition of dye exhaustion in untreated wool fibers, improving the bonding of these acid dyes to the keratinic structure.

Kinetics and Thermodynamics Studies of Monascus Red Dyeing on Wool

2013 ◽  
Vol 395-396 ◽  
pp. 565-570 ◽  
Author(s):  
Jia Jia Shen ◽  
Xu Ming Chen
Keyword(s):  
Wool Fiber ◽  
Adsorption Model ◽  
Kinetics And Thermodynamics ◽  
Langmuir Adsorption ◽  
Dyeing Process ◽  
Endothermic Process ◽  
Enthalpy And Entropy ◽  
Wool Dyeing ◽  
Dyeing Rate ◽  
Time Decrease

The mechanism of monascus red pigment dye on wool fiber was studied by analyzing of dyeing kinetics and thermodynamics. The results showed that the dyeing rate is quite high at the beginning of dyeing at 70°C-100°C.The diffusion coefficient rise while half-dyeing time decrease With the temperature rise. Its adsorption accords with the combination of Nernst and Langmuir adsorption model. Its enthalpy and entropy of dyeing was 15.21kJ/mol and 46.87J / (mol·K) respectively, which show that wool dyeing with monascus red is a endothermic process. This theoretical is useful to built dyeing process for wool fiber with monascus red.

COMBINATORIAL POLYNOMIALLY COMPUTABLE CHARACTERISTICS OF SUBSTITUTIONS AND THEIR PROPERTIES

2020 ◽  
Vol 7 (2) ◽  
pp. 34-41
Author(s):  
VLADIMIR NIKONOV ◽  
◽  
ANTON ZOBOV ◽  
Keyword(s):  
Mathematical Expectation ◽  
Point Of View ◽  
Small Range ◽  
Computational Point ◽  
Wide Range ◽  
Bijective Function ◽  
The Difference ◽  
Element Base ◽  
Selection Of

The construction and selection of a suitable bijective function, that is, substitution, is now becoming an important applied task, particularly for building block encryption systems. Many articles have suggested using different approaches to determining the quality of substitution, but most of them are highly computationally complex. The solution of this problem will significantly expand the range of methods for constructing and analyzing scheme in information protection systems. The purpose of research is to find easily measurable characteristics of substitutions, allowing to evaluate their quality, and also measures of the proximity of a particular substitutions to a random one, or its distance from it. For this purpose, several characteristics were proposed in this work: difference and polynomial, and their mathematical expectation was found, as well as variance for the difference characteristic. This allows us to make a conclusion about its quality by comparing the result of calculating the characteristic for a particular substitution with the calculated mathematical expectation. From a computational point of view, the thesises of the article are of exceptional interest due to the simplicity of the algorithm for quantifying the quality of bijective function substitutions. By its nature, the operation of calculating the difference characteristic carries out a simple summation of integer terms in a fixed and small range. Such an operation, both in the modern and in the prospective element base, is embedded in the logic of a wide range of functional elements, especially when implementing computational actions in the optical range, or on other carriers related to the field of nanotechnology.

Physical capital stock, technological upgrading and modernisation in Hungary

2005 ◽  
Vol 55 (2) ◽  
pp. 201-221 ◽  
Author(s):  
Andrea Szalavetz
Keyword(s):  
Capital Accumulation ◽  
Physical Capital ◽  
Developed Countries ◽  
Point Of View ◽  
Technology Generation ◽  
Development Policies ◽  
Specific Factors ◽  
Physical Capital Accumulation

This paper discusses the relation between the quality and quantity indicators of physical capital and modernisation. While international academic literature emphasises the role of intangible factors enabling technology generation and absorption rather than that of physical capital accumulation, this paper argues that the quantity and quality of physical capital are important modernisation factors, particularly in the case of small, undercapitalised countries that recently integrated into the world economy. The paper shows that in Hungary, as opposed to developed countries, the technological upgrading of capital assets was not necessarily accompanied by the upgrading of human capital i.e. the thesis of capital skill complementarity did not apply to the first decade of transformation and capital accumulation in Hungary. Finally, the paper shows that there are large differences between the average technological levels of individual industries. The dualism of the Hungarian economy, which is also manifest in terms of differences in the size of individual industries' technological gaps, is a disadvantage from the point of view of competitiveness. The increasing differences in the size of the technological gaps can be explained not only with industry-specific factors, but also with the weakness of technology and regional development policies, as well as with institutional deficiencies.

Flouride and Nitrate Status of Some Ground Waters in Chittor District of Rajasthan State (India)

2018 ◽  
Vol 6 (9) ◽  
pp. 119
Author(s):  
Trapti Sharma ◽  
R. P. Nagar ◽  
R. C. Gaur ◽  
Pooja Gupta ◽  
Charanjit Kaur
Keyword(s):  
Point Of View ◽  
World Health ◽  
Indian Council ◽  
Standard Methods ◽  
Ground Waters ◽  
Drinking Waters ◽  
Health Organization ◽  
Research World ◽  
Drinking Purpose

In Rajasthan state the ground waters of some areas like Ramganj-mandi, Morak, Barmer, Jaisalmer, Chittor and Udaipur etc. are susceptible from drinking point of view.To test the quality of groundwater in Chittor district 14, ground water samples were collected from various places and analyzed for pH, E.C., Fluoride and Nitrate parameters by standard methods (A.P.H. A., Washington, USA, 1995). The study revealed that none of the ground waters was found suitable completely from drinking point of view. Some are having electrical conductivity > 1.4 dS/m, some are having pH >8.5, some area having fluoride >1.5 ppm and some are having nitrate>45 ppm. These are the limits of various parameters permitted by various International authorities like Bureau of Indian Standard, Indian Council of Medical Research,world health Organization etc. for drinking waters. So, it is recommended to the residents of above areas to use water for drinking purpose only after reverse osmosis or adopting suitable method of removing excess of Fluoride and Nitrate for drinking water to avoid unwanted pathogenic diseases harmful for human health.

A Futures Study on the Quality Of Life from the Point Of View of Iranian Youth

2017 ◽  
Vol 14 (2) ◽  
pp. 1
Author(s):  
Sina Saeedy ◽  
Mojtaba Amiri ◽  
Mohammad Mahdi Zolfagharzadeh ◽  
Mohammad Rahim Eyvazi
Keyword(s):  
Quality Of Life ◽  
Life Satisfaction ◽  
Mixed Model ◽  
Satisfaction With Life ◽  
Point Of View ◽  
Human Society ◽  
Futures Studies ◽  
The Social ◽  
The University

Quality of life and satisfaction with life as tightly interconnected concepts have become of much importance in the urbanism era. No doubt, it is one of the most important goals of every human society to enhance a citizen’s quality of life and to increase their satisfaction with life. However, there are many signs which demonstrate the low level of life satisfaction of Iranian citizens especially among the youth. Thus, considering the temporal concept of life satisfaction, this research aims to make a futures study in this field. Therefore, using a mixed model and employing research methods from futures studies, life satisfaction among the students of the University of Tehran were measured and their views on this subject investigated. Both quantitative and qualitative data were analysed together in order to test the hypotheses and to address the research questions on the youth discontentment with quality of life. Findings showed that the level of life satisfaction among students is relatively low and their image of the future is not positive and not optimistic. These views were elicited and discussed in the social, economic, political, environmental and technological perspectives. Keywords:  futures studies, quality of life, satisfaction with life, youth

FUNDAMENTAL AND APPLIED SCIENTIFIC RESEARCH: сб.науч.тр./ OEAPS Inc.; редкол.: Флора Бертран (отв.ред.) [и др.]. - Берлин, Германия : OEAPS Inc., 2018. - 58 С.

2018 ◽  
Author(s):  
Мария Григорьевна Алпатова ◽  
Мария Игоревна Щеглова ◽  
Elmira Kalybaevna Adil’bekova ◽  
Nuradin Alibaev ◽  
Arunas Svitojus
Keyword(s):  
Service Sector ◽  
Applied Research ◽  
Point Of View ◽  
Scientific Quality ◽  
Final Decision ◽  
Main Criterion ◽  
The Public ◽  
Peer Reviewers ◽  
Verification Process

The conference is a major international forum for analyzing and discussing trends and approaches in research in the field of basic science and applied research. We provide a platform for discussions on innovative, theoretical and empirical research. The form of the conference: in absentia, without specifying the form in the collection of articles. Working languages: Russian, English Doctors and candidates of science, scientists, specialists of various profiles and directions, applicants for academic degrees, teachers, graduate students, undergraduates, students are invited to participate in the conference. There is one blind verification process in the journal. All articles will be initially evaluated by the editor for compliance with the journal. Manuscripts that are considered appropriate are then usually sent to at least two independent peer reviewers to assess the scientific quality of the article. The editor is responsible for the final decision on whether to accept or reject the article. The editor's decision is final. The main criterion used in assessing the manuscript submitted to the journal is: uniqueness or innovation in the work from the point of view of the methodology being developed and / or its application to a problem of particular importance in the public sector or service sector and / or the setting in which the efforts, for example, in the developing region of the world. That is, the very model / methodology, application and context of problems, at least one of them must be unique and important. Additional criteria considered in the consideration of the submitted document are its accuracy, organization / presentation (ie logical flow) and recording quality.

FUNDAMENTAL AND APPLIED SCIENTIFIC RESEARCH April 2019: сб.науч.тр./ OEAPS Inc.; редкол.: Флора Бертран (отв.ред.) [и др.]. - Берлин, Германия : OEAPS Inc., 2019. - 98 C.

2019 ◽  
Author(s):  
Изабелла Станиславовна Чибисова ◽  
Диана Ильгизаровна Шарипова ◽  
Альфия Галиевна Зулькарнаева ◽  
Ксения Александровна Дулова ◽  
Садег Амирзадеган ◽  
...  
Keyword(s):  
Service Sector ◽  
Applied Research ◽  
Point Of View ◽  
Scientific Quality ◽  
Final Decision ◽  
Main Criterion ◽  
The Public ◽  
Peer Reviewers ◽  
Verification Process

The conference is a major international forum for analyzing and discussing trends and approaches in research in the field of basic science and applied research. We provide a platform for discussions on innovative, theoretical and empirical research. The form of the conference: in absentia, without specifying the form in the collection of articles. Working languages: Russian, English Doctors and candidates of science, scientists, specialists of various profiles and directions, applicants for academic degrees, teachers, graduate students, undergraduates, students are invited to participate in the conference. There is one blind verification process in the journal. All articles will be initially evaluated by the editor for compliance with the journal. Manuscripts that are considered appropriate are then usually sent to at least two independent peer reviewers to assess the scientific quality of the article. The editor is responsible for the final decision on whether to accept or reject the article. The editor's decision is final. The main criterion used in assessing the manuscript submitted to the journal is: uniqueness or innovation in the work from the point of view of the methodology being developed and / or its application to a problem of particular importance in the public sector or service sector and / or the setting in which the efforts, for example, in the developing region of the world. That is, the very model / methodology, application and context of problems, at least one of them must be unique and important. Additional criteria considered in the consideration of the submitted document are its accuracy, organization / presentation (ie logical flow) and recording quality.

Sign in / Sign up

Export Citation Format

Share Document