scholarly journals Towards the use of acrylic acid graft-copolymerized plant biofiber in sustainable fortified composites: Manufacturing and characterization

e-Polymers ◽  
2021 ◽  
Vol 21 (1) ◽  
pp. 881-896
Author(s):  
Ashvinder K. Rana ◽  
Vijay Kumar Thakur ◽  
Amar S. Singha
Keyword(s):  
Mechanical Properties ◽  
Acrylic Acid ◽  
Moisture Absorption ◽  
Oxygen Index ◽  
Polymeric Materials ◽  
Dielectric Strength ◽  
Differential Scanning Calorimetric ◽  
Limiting Oxygen Index ◽  
Particle Form ◽  
The Impact

Abstract In this study, the impact of particle form of the Cannabis indica plant biofibers and the fiber’s surface tailoring on the physical, thermal, dielectric, and mechanical properties of unsaturated polyester composite specimens manufactured utilizing nonconventional materials were investigated. The mechanical properties such as compressive, flexural, and tensile strengths of the composite specimens were noticed to increase after functionalization of biofiber with acrylic acid and maximum enhancement was found at 20% of biofiber sacking. The physical characterization was concentrated on the assurance of the dielectric constant, dielectric strength, dielectric loss, moisture absorption, chemical resistance, percentage of swelling, limiting oxygen index, and biodegradation of polymer composites under red soil. An increase in dielectric strength from 28 to 29 kV, limiting oxygen index values from 19% to 23%, and moisture/water absorption behavior was noted for resulted bio-composites after surface tailoring of biofiber. To assess the deterioration of the polymeric materials with the temperature, differential scanning calorimetric and the thermogravimetric tests were carried out and enhancement in thermal stability was noted after fortification of polyester composites with functionalized biofiber.

scholarly journals Environmentally Friendly Flame-Retardant and Its Application in Rigid Polyurethane Foam

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Yongjun Chen ◽  
Zhixin Jia ◽  
Yuanfang Luo ◽  
Demin Jia ◽  
Bin Li
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Flame Retardant ◽  
Polyurethane Foam ◽  
Thermal Effects ◽  
Oxygen Index ◽  
Rigid Polyurethane Foam ◽  
Limiting Oxygen Index ◽  
Peak Heat Release Rate ◽  
The Impact

A novel Flame-Retardant N-(P,P′-diphenyl) phosphorus-based-(3-triethoxysilicon) propylamine (DPTP) was synthesized in this study. The impact of DPTP on the mechanical properties, thermal stability, and flame retardancy of rigid polyurethane foam (RPUF) was studied. The addition of DPTP to RPUF can significantly reduce the undesirable thermal effects and smoke density during combustion, as well as increasing the limiting oxygen index. Compared with pure RPUF, the peak heat release rate of RPUF containing 10 phr of DPTP decreased by 39.4%, while its peak smoke production rate decreased by 49.9%. However, it was also found that the addition of DPTP reduced the compressive strength of RPUF.

scholarly journals Effects of Various Types of Expandable Graphite and Blackcurrant Pomace on the Properties of Viscoelastic Polyurethane Foams

Materials ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1801
Author(s):  
Rafał Oliwa ◽  
Joanna Ryszkowska ◽  
Mariusz Oleksy ◽  
Monika Auguścik-Królikowska ◽  
Małgorzata Gzik ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Chemical Structure ◽  
Oxygen Index ◽  
Polyurethane Foams ◽  
Expandable Graphite ◽  
Ftir Analysis ◽  
Limiting Oxygen Index ◽  
Peak Heat Release Rate ◽  
Physical And Chemical ◽  
Scanning Electron

We investigated the effect of the type and amount of expandable graphite (EG) and blackcurrant pomace (BCP) on the flammability, thermal stability, mechanical properties, physical, and chemical structure of viscoelastic polyurethane foams (VEF). For this purpose, the polyurethane foams containing EG, BCP, and EG with BCP were obtained. The content of EG varied in the range of 3–15 per hundred polyols (php), while the BCP content was 30 php. Based on the obtained results, it was found that the additional introduction of BCPs into EG-containing composites allows for an additive effect in improving the functional properties of viscoelastic polyurethane foams. As a result, the composite containing 30 php of BCP and 15 php of EG with the largest particle size and expanded volume shows the largest change in the studied parameters (hardness (H) = 2.65 kPa (+16.2%), limiting oxygen index (LOI) = 26% (+44.4%), and peak heat release rate (pHRR) = 15.5 kW/m2 (−87.4%)). In addition, this composite was characterized by the highest char yield (m600 = 17.9% (+44.1%)). In turn, the change in mechanical properties is related to a change in the physical and chemical structure of the foams as indicated by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) analysis.

scholarly journals An Effective Method for Preparation of Liquid Phosphoric Anhydride and Its Application in Flame Retardant Epoxy Resin

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2205
Author(s):  
Qian Li ◽  
Yujie Li ◽  
Yifan Chen ◽  
Qiang Wu ◽  
Siqun Wang
Keyword(s):  
Flame Retardant ◽  
Epoxy Resin ◽  
Epoxy Resins ◽  
Oxygen Index ◽  
Decomposition Temperature ◽  
Ease Of Use ◽  
Limiting Oxygen Index ◽  
Good Thermal Stability ◽  
Low Viscosity ◽  
The Impact

A novel liquid phosphorous-containing flame retardant anhydride (LPFA) with low viscosity was synthesized from 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) and methyl tetrahydrophthalic anhydride (MeTHPA) and further cured with bisphenol-A epoxy resin E-51 for the preparation of the flame retardant epoxy resins. Both Fourier transform infrared spectroscopy (FT-IR), mass spectrometry (MS) and nuclear magnetic resonance (NMR) measurements revealed the successful incorporation of DOPO on the molecular chains of MeTHPA through chemical reaction. The oxygen index analysis showed that the LPFA-cured epoxy resin exhibited excellent flame retardant performance, and the corresponding limiting oxygen index (LOI) value could reach 31.2%. The UL-94V-0 rating was achieved for the flame retardant epoxy resin with the phosphorus content of 2.7%. With the addition of LPFA, the impact strength of the cured epoxy resins remained almost unchanged, but the flexural strength gradually increased. Meanwhile, all the epoxy resins showed good thermal stability. The glass transition temperature (Tg) and thermal decomposition temperature (Td) of epoxy resin cured by LPFA decreased slightly compared with that of MeTHPA-cured epoxy resin. Based on such excellent flame retardancy, low viscosity at room temperature and ease of use, LPFA showed potential as an appropriate curing agent in the field of electrical insulation materials.

Flame Retardation of Plain Weave Fabrics Made of Polyacrylonitrile Pre-Oxidized Yarns

2011 ◽  
Vol 175-176 ◽  
pp. 465-468 ◽  
Author(s):  
Lei Shi ◽  
Hua Wu Liu ◽  
Ping Xu ◽  
Dang Feng Zhao
Keyword(s):  
Mechanical Properties ◽  
Flame Retardant ◽  
Oxygen Index ◽  
Limiting Oxygen Index ◽  
Plain Weave ◽  
Weave Fabric ◽  
Short Period ◽  
Flame Retardation ◽  
Fabric Structures

Plain weave fabrics of polyacrylonitrile pre-oxidation yarns (PANOF) were prepared by small rapier loom. The flame retardation properties, mechanical properties and wear behaviors of PANOF plain weave fabrics were tested. The limiting oxygen index (LOI) of these PANOF plain weave fabric samples was 31%, which meets the criterion of flame-retardant fabrics. These fabrics neither melt nor shrunk when left in flame for a short period of time and the fabric structures were well maintained. Compared with flammable polyacrylonitrile fabrics, the polyacrylonitrile pre-oxidation fabrics exhibited excellent flame retardation properties, with satisfactory mechanical properties and comfortable handle.

Phase Morphology, Thermal and Mechanical Properties of Compatibilized Nylon12/Natural Rubber Blends Using PS/MNR

2013 ◽  
Vol 844 ◽  
pp. 53-56
Author(s):  
Saravalee Saengthaveep ◽  
Sadhan C. Jana ◽  
Rathanawan Magaraphan
Keyword(s):  
Mechanical Properties ◽  
Natural Rubber ◽  
Moisture Absorption ◽  
Rubber Particle ◽  
Impact Resistance ◽  
Phase Morphology ◽  
Thermal And Mechanical Properties ◽  
Binary Blend ◽  
Polyamide 12 ◽  
The Impact

To produce a tough material for application demanding high impact resistance and low moisture absorption, melt blending of Nylon12 (Polyamide 12, PA12) and natural rubber (NR) was carried out in a brabender plasticorder at 210 °C with rotor speed of 70 rpm in the presence of polystyrene/maleated natural rubber (PS/MNR) blend as a compatibilizer. The effect of compatibilizer content (1, 3, 5, 7 and 10 phr) on phase morphology, thermal, and mechanical properties of [Nylon12/NR]/[PS/MNR] blends was investigated by using SEM, DSC, and Izod impact tester, respectively. The result revealed that PS/MNR blend improved the compatibility of Nylon12/NR blends efficiently due to the presence of amide linkage at the interfaces from the reaction between the reactive groups of MNR and the NH2 end groups of Nylon12 during mixing. A fine phase morphology (good dispersion and small dispersed phase size of NR domains in Nylon12 matrix) of [Nylon12/NR]/[PS/MNR] blends was observed at the optimum compatibilizer content of 7 phr, relating to the improvement of mechanical property. The impact energy of [Nylon12/NR]/[PS/MNR] blends was 503 J/m higher than that of neat Nylon12 (115 J/m) and Nylon12/NR binary blend (241 J/m) due to the toughening effect of rubber and proper morphology. The melting temperature of all blends did not change obviously from thermal analysis. However, the presence of rubber particle obstructed the crystallization of Nylon12 phase, leading to the decreasing of %crystallinity from 93% to around 70%.

Flammability and mechanical properties of poly(styrene–butadiene–styrene) copolymer–containing intumescent flame retardants

2015 ◽  
Vol 30 (6) ◽  
pp. 816-826 ◽  
Author(s):  
Yiren Huang ◽  
Jianwei Yang ◽  
Zhengzhou Wang
Keyword(s):  
Mechanical Properties ◽  
Flame Retardant ◽  
Flame Retardants ◽  
Oxygen Index ◽  
Limiting Oxygen Index ◽  
Styrene Butadiene Styrene ◽  
Flame Retardant Properties ◽  
Intumescent Flame Retardants ◽  
Styrene Butadiene ◽  
Butadiene Styrene

Flame-retardant properties of ammonium polyphosphate (APP) and its two microcapsules, APP with a shell of melamine–formaldehyde (MF) resin (MFAPP) and APP with a shell of epoxy resin (EPAPP), were studied in styrene–butadiene–styrene (SBS). The results indicate that APP after the microencapsulation leads to an increase in limiting oxygen index in SBS compared with APP. When dipentaerythritol is incorporated into the SBS composites containing the APP microcapsules, a further improvement in flame retardancy of the composites is observed. The microencapsulation does not result in much improvement of mechanical properties. Moreover, the effect of a compatibilizer (SBS grafted with maleic anhydride) on flame-retardant and mechanical properties of SBS/APP composites was investigated.

Flammability and Mechanical Properties of Toughened Phenolic Foams Containing Nano MP, Nano MCA, and their Capsules

2013 ◽  
Vol 791-793 ◽  
pp. 72-75
Author(s):  
Zheng Zhou Wang ◽  
Shao Hong Xu ◽  
Yan Ping Deng
Keyword(s):  
Mechanical Properties ◽  
Polyethylene Glycol ◽  
Flame Retardant ◽  
Oxygen Index ◽  
Limiting Oxygen Index

Flammability of polyethylene glycol toughened phenolic (PF) foams containing nanomelamine phosphate (NMP), nanomelamine cyanurate (NMCA) or their capsules was studied by limiting oxygen index (LOI). The effect of the nanoparticles and their micro counterparts on flame retardant and mechanical properties of the toughened foams is compared.

scholarly journals Rigid Polyurethane Foams Reinforced with POSS-Impregnated Sugar Beet Pulp Filler

Materials ◽  
2020 ◽  
Vol 13 (23) ◽  
pp. 5493
Author(s):  
Anna Strąkowska ◽  
Sylwia Członka ◽  
Agnė Kairytė
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Sugar Beet ◽  
Sugar Beet Pulp ◽  
Polyhedral Oligomeric Silsesquioxanes ◽  
Limiting Oxygen Index ◽  
Composite Foams ◽  
Beet Pulp ◽  
The Impact ◽  
Thermal Stability Of

Rigid polyurethane (PUR) foams were reinforced with sugar beet pulp (BP) impregnated with Aminopropylisobutyl-polyhedral oligomeric silsesquioxanes (APIB-POSS). BP filler was incorporated into PUR at different percentages—1, 2, and 5 wt.%. The impact of BP filler on morphology features, mechanical performances, and thermal stability of PUR was examined. The results revealed that the greatest improvement in physico-mechanical properties was observed at lower concentrations (1 and 2 wt.%) of BP filler. For example, when compared with neat PUR foams, the addition of 2 wt.% of BP resulted in the formation of PUR composite foams with increased compressive strength (~12%), greater flexural strength (~12%), and better impact strength (~6%). The results of thermogravimetric analysis (TGA) revealed that, due to the good thermal stability of POSS-impregnated BP filler, the reinforced PUR composite foams were characterized by better thermal stability—for example, by increasing the content of BP filler up to 5 wt.%, the mass residue measured at 600 °C increased from 29.0 to 31.9%. Moreover, the addition of each amount of filler resulted in the improvement of fire resistance of PUR composite foams, which was determined by measuring the value of heat peak release (pHRR), total heat release (THR), total smoke release (TSR), limiting oxygen index (LOI), and the amount of carbon monoxide (CO) and carbon dioxide (CO2) released during the combustion. The greatest improvement was observed for PUR composite foams with 2 wt.% of BP filler. The results presented in the current study indicate that the addition of a proper amount of POSS-impregnated BP filler may be an effective approach to the synthesis of PUR composites with improved physico-mechanical properties. Due to the outstanding properties of PUR composite foams reinforced with POSS-impregnated BP, such developed materials may be successfully used as thermal insulation materials in the building and construction industry.

Flammability and Mechanical Properties of Toughened Phenolic Foams Containing APP, MP and MCA

2013 ◽  
Vol 671-674 ◽  
pp. 1809-1812
Author(s):  
Shao Hong Xu ◽  
Xiao Yu Sui ◽  
Zheng Zhou Wang
Keyword(s):  
Mechanical Properties ◽  
Thermal Decomposition ◽  
Flame Retardant ◽  
Oxygen Index ◽  
Ammonium Polyphosphate ◽  
Limiting Oxygen Index ◽  
Melamine Cyanurate ◽  
Melamine Phosphate

Flammability of toughened phenolic (PF) foams containing ammonium polyphosphate (APP), melamine phosphate (MP) or melamine cyanurate(MCA) was studied by limiting oxygen index (LOI). The LOI values show that APP or MP is an effient flame retardant than MCA in the toughened PF foams. The thermal decomposition and mechanical properties of the phenolic foams were also investigated.

Sign in / Sign up

Export Citation Format

Share Document