scholarly journals Response of the callus cells of fir (Abies nordmanniana) to in vitro heavy metal stress

2017 ◽  
Vol 59 (1) ◽  
pp. 25-33 ◽  
Author(s):  
Katarzyna Nawrot-Chorabik
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Heavy Metal Stress ◽  
Heavy Metal Resistance ◽  
Metal Resistance ◽  
Stress Factors ◽  
Negative Effects ◽  
Abies Nordmanniana ◽  
Long Time

Abstract The aim of the presented research was to investigate the effect of three heavy metals - lead, cadmium and copper - on the callus cells of Abies nordmanniana. The toxicity degree and toxicity effect of the selected heavy metals was determined on the embryonic level. On the basis of the spectrometric analyses as well as macroscopic and microscopic observations, this research referred to the accumulation of heavy metals in tissues, assuming that this mechanism is related to the acquisition of tolerance by cells exposed to this type of abiotic stress. Moreover, the effect of the genotype of fir on the cell defence, that is, the induction of tolerance, was analysed. Understanding of the issues related to the heavy metal resistance of plant genotypes in future may contribute to the selection of genotypes of individuals that are more resistant to stress factors, particularly in the multi-directional and rational forest management. The results showed that lead (20 mg l-1), which proved to be the most toxic amongst the three examined heavy metals, has the most severe negative effects on the tissue of fir trees. Copper (20 mg l-1) was accumulated for a long time in the cells of fir trees, and it was not degraded or excreted outside the tissues even after three weeks of in vitro culture. Of the three tested genotypes, G14 had the greatest tendency to accumulate each of the examined metals, that is, it appeared to be the least tolerant genotype.

scholarly journals Plasmids pMOL28 and pMOL30 of Cupriavidus metallidurans Are Specialized in the Maximal Viable Response to Heavy Metals

2007 ◽  
Vol 189 (20) ◽  
pp. 7417-7425 ◽  
Author(s):  
Sébastien Monchy ◽  
Mohammed A. Benotmane ◽  
Paul Janssen ◽  
Tatiana Vallaeys ◽  
Safiyh Taghavi ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Heavy Metal Stress ◽  
Heavy Metal Resistance ◽  
Metal Resistance ◽  
Genomic Islands ◽  
Specific Response ◽  
Resistance Proteins ◽  
Cupriavidus Metallidurans ◽  
General Response

ABSTRACT We fully annotated two large plasmids, pMOL28 (164 open reading frames [ORFs]; 171,459 bp) and pMOL30 (247 ORFs; 233,720 bp), in the genome of Cupriavidus metallidurans CH34. pMOL28 contains a backbone of maintenance and transfer genes resembling those found in plasmid pSym of C. taiwanensis and plasmid pHG1 of C. eutrophus, suggesting that they belong to a new class of plasmids. Genes involved in resistance to the heavy metals Co(II), Cr(VI), Hg(II), and Ni(II) are concentrated in a 34-kb region on pMOL28, and genes involved in resistance to Ag(I), Cd(II), Co(II), Cu(II), Hg(II), Pb(II), and Zn(II) occur in a 132-kb region on pMOL30. We identified three putative genomic islands containing metal resistance operons flanked by mobile genetic elements, one on pMOL28 and two on pMOL30. Transcriptomic analysis using quantitative PCR and microarrays revealed metal-mediated up-regulation of 83 genes on pMOL28 and 143 genes on pMOL30 that coded for all known heavy metal resistance proteins, some new heavy metal resistance proteins (czcJ, mmrQ, and pbrU), membrane proteins, truncated transposases, conjugative transfer proteins, and many unknown proteins. Five genes on each plasmid were down-regulated; for one of them, chrI localized on pMOL28, the down-regulation occurred in the presence of five cations. We observed multiple cross-responses (induction of specific metal resistance by other metals), suggesting that the cellular defense of C. metallidurans against heavy metal stress involves various regulons and probably has multiple stages, including a more general response and a more metal-specific response.

Screening of heavy metal and antibiotic resistance among Proteus vulgaris isolates from hospital wastewater of Northern India

2021 ◽  
Vol 19 ◽  
Author(s):  
Manzar Alam ◽  
Mohd Imran ◽  
Syed Sayeed Ahmad
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Multiple Drug Resistance ◽  
Heavy Metal Resistance ◽  
Metal Resistance ◽  
Antibiotics Resistance ◽  
Proteus Vulgaris ◽  
Resistance To Antibiotics ◽  
Transfer Frequency ◽  
Resistance Patterns

Background: Microbial resistance to antibiotics and heavy metals is a rising problem in the world today. All the Proteus vulgaris isolates showed their MIC in between 50-1600 µg/ml. Of 70% and 46% of the isolates showed their MIC at 800-1200 µg/ml against Zn2+ and Cu2+ while 80% of the isolates showed their MIC at 100-200 µg/ml against Ni2+, respectively. All Proteus vulgaris isolates also exhibited multiple resistance patterns (2-7 heavy metals) in different combination of metals. The Multi metal resistance Index (MHMR) ranges were found (0.04-0.5). Methods: A high level of antibiotics resistance was observed against Methicillin (100%) and least to Oflaxicin (6%), Gentamycine and Neomycin (10%). All Proteus vulgaris isolates also showed multiple drug resistance patterns (2-12 antibiotics) in different combination of antibiotics. The MAR index ranges were found (0.02-0.7). Of 98%, 84% and 80% of the total isolates showed urease, gelatinase and amylase activity. Results: The Proteus vulgaris isolates contained plasmid of size ranging from 42.5 to 57.0kb and molecular weight of plasmids ranged from 27.2 to 37.0 MD. Incidences of resistance transfer, 7 pairs of isolates were assessed for the transfer of the antibiotic/ heavy metal resistance markers. The higher (4.4x10-1 and 3.4x10-1) transfer frequency was observed among antibiotic and heavy metal while lower transfer frequency were (5.0x10-2 and 1.0x10-2) showed against antibiotic and heavy metal in both the medium from the entire site tested, respectively. Conclusion: Indicating the high threat of environmental pollution and appearance of heavy metal resistance which may support the enlargement of resistance to antibiotics among the pathogens.

scholarly journals A Review on the Resistance and Accumulation of Heavy Metals by Different Microbial Strains

2022 ◽  
Author(s):  
Madhuri Girdhar ◽  
Zeba Tabassum ◽  
Kopal Singh ◽  
Anand Mohan
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Volcanic Eruptions ◽  
Heavy Metal Resistance ◽  
Metal Resistance ◽  
Contaminated Sites ◽  
Bacillus Species ◽  
Polluted Sites ◽  
Pollution Accumulation ◽  
Microbial Strains

Heavy metals accumulated the earth crust and causes extreme pollution. Accumulation of rich concentrations of heavy metals in environments can cause various human diseases which risks health and high ecological issues. Mercury, arsenic, lead, silver, cadmium, chromium, etc. are some heavy metals harmful to organisms at even very low concentration. Heavy metal pollution is increasing day by day due to industrialization, urbanization, mining, volcanic eruptions, weathering of rocks, etc. Different microbial strains have developed very efficient and unique mechanisms for tolerating heavy metals in polluted sites with eco-friendly techniques. Heavy metals are group of metals with density more than 5 g/cm3. Microorganisms are generally present in contaminated sites of heavy metals and they develop new strategies which are metabolism dependent or independent to tackle with the adverse effects of heavy metals. Bacteria, Algae, Fungi, Cyanobacteria uses in bioremediation technique and acts a biosorbent. Removal of heavy metal from contaminated sites using microbial strains is cheaper alternative. Mostly species involved in bioremediation include Enterobacter and Pseudomonas species and some of bacillus species too in bacteria. Aspergillus and Penicillin species used in heavy metal resistance in fungi. Various species of the brown algae and Cyanobacteria shows resistance in algae.

scholarly journals Isolation and Molecular Identification of Virulence, Antimicrobial and Heavy Metal Resistance Genes in Livestock-Associated Methicillin-Resistant Staphylococcus aureus

Pathogens ◽  
2019 ◽  
Vol 8 (2) ◽  
pp. 79 ◽  
Author(s):  
Chumisa C. Dweba ◽  
Oliver T. Zishiri ◽  
Mohamed E. El Zowalaty
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Staphylococcus Aureus ◽  
South African ◽  
Resistance Genes ◽  
Heavy Metal Resistance ◽  
Livestock Production ◽  
Metal Resistance ◽  
Diffusion Method ◽  
Methicillin Resistant

Staphylococcus aureus is one of the most important pathogens of humans and animals. Livestock production contributes a significant proportion to the South African Gross Domestic Product. Consequently, the aim of this study was to determine for the first time the prevalence, virulence, antibiotic and heavy metal resistance in livestock-associated S. aureus isolated from South African livestock production systems. Microbial phenotypic methods were used to detect the presence of antibiotic and heavy metal resistance. Furthermore, molecular DNA based methods were used to genetically determine virulence as well as antibiotic and heavy metal resistance determinants. Polymerase chain reaction (PCR) confirmed 217 out of 403 (53.8%) isolates to be S. aureus. Kirby-Bauer disc diffusion method was conducted to evaluate antibiotic resistance and 90.8% of S. aureus isolates were found to be resistant to at least three antibiotics, and therefore, classified as multidrug resistant. Of the antibiotics tested, 98% of the isolates demonstrated resistance towards penicillin G. High resistance was shown against different heavy metals, with 90% (196/217), 88% (192/217), 86% (188/217) and 84% (183/217) of the isolates resistant to 1500 µg/mL concentration of Cadmium (Cd), Zinc (Zn), Lead (Pb) and Copper (Cu) respectively. A total of 10 antimicrobial resistance and virulence genetic determinants were screened for all livestock associated S. aureus isolates. Methicillin-resistant S. aureus (MRSA) isolates were identified, by the presence of mecC, in 27% of the isolates with a significant relationship (p < 0.001)) with the host animal. This is the first report of mecC positive LA-MRSA in South Africa and the African continent. The gene for tetracycline resistance (tetK) was the most frequently detected of the screened genes with an overall prevalence of 35% and the highest prevalence percentage was observed for goats (56.76%) followed by avian species (chicken, duck and wild birds) (42.5%). Virulence-associated genes were observed across all animal host species. The study reports the presence of luks/pv, a gene encoding the PVL toxin previously described to be a marker for community acquired-MRSA, suggesting the crossing of species between human and livestock. The high prevalence of S. aureus from the livestock indicates a major food security and healthcare threat. This threat is further compounded by the virulence of the pathogen, which causes numerous clinical manifestations. The phenomenon of co-selection is observed in this study as isolates exhibited resistance to both antibiotics and heavy metals. Further, all the screened antibiotic and heavy metal resistance genes did not correspond with the phenotypic resistance.

scholarly journals Bioremediation of lead using bacterial isolates and study their plant relieving effect on wheat under metal contamination

2020 ◽  
Vol 35 (1-2) ◽  
Author(s):  
Prashakha J. Shukla ◽  
Vishwa R. Vyas
Keyword(s):  
Heavy Metal ◽  
Stress Condition ◽  
Inhibitory Concentration ◽  
Anthropogenic Activities ◽  
Wheat Plant ◽  
Cost Effective ◽  
Heavy Metal Resistance ◽  
Metal Resistance

Increasing concentration of heavy metals due to various anthropogenic activities is a serious problem. To overcome this issue, many chemical and physical methods are available but they are either directly or indirectly harmful to nature. By these methods more quality of chemicals are wasted. So, bioremediation is the best method to remove pollutants. It is an eco-friendly and cost-effective process. A low concentration of heavy metal is required to plant for their growth and metabolic process but at higher concentration, plants do not survive. With the use of microbes, we can survive plants at certain levels. During this work heavy metal tolerating microorganism was isolated and purified. Various tests were performed like staining, minimum inhibitory concentration, multiple heavy metal resistance, multiple antibiotic resistance, biochemical test, DNA isolation, in vitro examination of the wheat plant under the stress condition of lead (1000ppm).

scholarly journals Microbial bioremediation of heavy metals

2021 ◽  
Vol 75 (2) ◽  
pp. 103-115
Author(s):  
Ana Volaric ◽  
Zorica Svircev ◽  
Dragana Tamindzija ◽  
Dragan Radnovic
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Heavy Metal Resistance ◽  
Pilot Scale ◽  
Resistance Mechanisms ◽  
Metal Resistance ◽  
Novel Technologies ◽  
Living Organisms ◽  
Microbial Bioremediation ◽  
Physical And Chemical

Heavy metal pollution is one of the most serious environmental problems, due to metal ions persistence, bioavailability, and toxicity. There are many conventional physical and chemical techniques traditionally used for environmental clean-up. Due to several drawbacks regarding these methods, the use of living organisms, or bioremediation, is becoming more prevalent. Biotechnological application of microorganisms is already successfully implemented and is in constant development, with many microbial strains successfully removing heavy metals. This paper provides an overview of the main heavy metal characteristics and describes the interactions with microorganisms. Key heavy metal resistance mechanisms in microorganisms are described, as well as the main principles and types of heavy metal bioremediation methods, with details on successful pilot scale bioreactor studies. Special attention should be given to indigenous bacteria isolated from the polluted environments since such species are already adapted to contamination and possess resistance mechanisms. Utilization of bacterial biofilms or consortia could be advantageous due to higher resistance and a combination of several metabolic pathways, and thus, the possibility to remove several heavy metals simultaneously. Novel technologies covered in this review, such as nanotechnology, genetic engineering, and metagenomics, are being introduced to the field of bioremediation in order to improve the process. To conclude, bioremediation is a potentially powerful solution for cleaning the environment.

scholarly journals Engineering Forest Trees with Heavy Metal Resistance Genes

2006 ◽  
Vol 55 (1-6) ◽  
pp. 263-268 ◽  
Author(s):  
Scott A. Merkle
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Field Tests ◽  
Environmentally Friendly ◽  
Woody Species ◽  
Metal Resistance ◽  
Transgenic Trees ◽  
Forest Trees ◽  
Toxic Heavy Metals

Abstract Pollution of soil and water with heavy metals such as mercury, cadmium and arsenic, is a worldwide problem. Phytoremediation, the use of plants to remove, sequester or detoxify pollutants, including heavy metals, offers an environmentally-friendly alternative to engineering- based methods for remediation. Forest trees have multiple features that make them particularly useful for removal of toxic heavy metals, especially if they can be engineered with genes allowing them to handle high levels of these elements. Although still in its infancy, research with transgenic trees carrying genes allowing them to detoxify or sequester some heavy metals has already made promising progress. Most of the work to date has been performed using poplar species and hybrids, although other woody species could be equally as useful. Trees have been engineered with genes for the handling of mercury, cadmium, copper and arsenic following two main approaches, phytoextraction and phytotransformation/ phytovolatilizaton. In vitro studies have shown the transgenic trees to have enhanced abilities to tolerate and/or accumulate these metals, and preliminary results from field tests indicate that the trees are functioning. New combinations of genes involved in metal transport or conversion may further enhance the heavy metal remediation capabilities of the transgenic trees. Given the environmentally friendly application, forest trees engineered for phytoremediation may be some of the first transgenic forest trees approved for operational deployment.

scholarly journals Antibiotic Profiling of Heavy Metal Resistant Bacterial Isolates from the Effluent of a Garment Industry in Lalitpur, Nepal

Our Nature ◽  
1970 ◽  
Vol 7 (1) ◽  
pp. 203-206 ◽  
Author(s):  
M. Sharma ◽  
H.P. Thapaliya
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Antibiotic Resistance ◽  
Heavy Metal Resistance ◽  
Garment Industry ◽  
Metal Resistance ◽  
Antibiotics Resistance ◽  
Bacterial Isolates ◽  
Heavy Metal Resistant ◽  
Multiple Antibiotics

Heavy metal resistant bacterial isolates from the effluent in a garment industry site were examined to assess their resistance towards multiple antibiotics. Heavy metal resistance property has been found to enhance the antibiotic resistance ability of microorganisms. Isolation of the heavy metal resistant organisms was done in media containing salts of heavy metals. Organisms were identified belonging to the genera Bacillus, Corynebacterium, Lactobacillus, Aeromonas and Enterococcus. Bacterial isolates were tested for their sensitivity to seven common antibiotics (penicillin, tetracycline, erythromycin, chloramphenicol, gentamicin, vancomycin and cotrimoxazole) using Kirby-Bauer technique. Isolates were found to be resistant to multiple antibiotics but all the isolates were sensitive to gentamicin. The data of our study indicates that metal pollution of the environment is the cause of heavy metal resistance isolates and hence antibiotic resistance.Key words: Heavy metal, effluent, antibiotics, resistance, Bacteria, pollution.DOI: 10.3126/on.v7i1.2572Our Nature (2009) 7:203-206  

Screening of Sugar Beet Regenerants for the Heavy Metal Resistance MTP4 Gene

2021 ◽  
Vol 37 (4) ◽  
pp. 14-19
Author(s):  
N.R. Mikheeva ◽  
A.A. Nalbandyan ◽  
N.N. Cherkasova
Keyword(s):  
Heavy Metals ◽  
Sugar Beet ◽  
In Vitro Selection ◽  
Metal Tolerance ◽  
Molecular Genetic ◽  
Heavy Metal Resistance ◽  
Metal Resistance ◽  
Gene Sequence Analysis ◽  
Selection Of

The MTP4 (Metal Tolerance Protein 4) gene, which controls the resistance of sugar beet plants to heavy metals and is located on the 3rd chromosome has been studied. Micro clones grown in vitro with lethal Cd doses were used as explants. For PCR, specific primers MTP4A F/R and MTP4B F/R, covering the 2nd, 3rd and 4th exons and introns between them in the MTP4 gene, were used. Samples with resistance to heavy metals (in particular, Cd) contained some nucleotide changes in the 4th exon resulting in amino acid substitutions in the polypeptide chain. Based on the results of the bioinformatics analysis, it can be assumed with a high probability that the resistance of the studied breeding materials to heavy metals arose due to the presence of certain polymorphisms in the analyzed sugar beet gene. Geneious Prime software as a tool for the MTP4 gene sequence analysis will probably allow the in vitro selection of resistant forms for the subsequent use in the breeding scheme. Key words: sugar beet, МТР genes, genetic polymorphism, PCR, molecular genetic markers, breeding, DNA

scholarly journals Surface water isolates of hemolytic and non-hemolytic Acinetobacter with multiple drug and heavy metal resistance ability

2013 ◽  
Vol 12 (1) ◽  
pp. 1-12 ◽  
Author(s):  
Sevilay Akbulut ◽  
Fadime Yilmaz ◽  
Bulent Icgen
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Surface Water ◽  
Pathogenic Bacteria ◽  
Rapid Development ◽  
Heavy Metal Resistance ◽  
Metal Resistance ◽  
Rdna Sequencing ◽  
Wide Range ◽  
Multiple Drugs

Acinetobacter in surface waters are a major concern because of their rapid development of resistance to a wide range of antimicrobials and their ability to persist in these waters for a very long time. Four surface water isolates of Acinetobacter having both multidrug- and multimetal-resistant ability were isolated and identified through biochemical tests and 16S rDNA sequencing. Based on these analyses, two hemolytic isolates were affiliated with Acinetobacter haemolyticus with an accession number of X81662. The other two non-hemolytic isolates were identified as Acinetobacter johnsonii and Acinetobacter calcoaceticus and affiliated with accession numbers of Z93440 and AJ888983, respectively. The antibiotic and heavy metal resistance profiles of the isolates were determined by using 26 antibiotics and 17 heavy metals. Acinetobacter isolates displayed resistance to β-lactams, cephalosporins, aminoglycosides, and sulfonamides. The hemolytic isolates were found to show resistance to higher numbers of heavy metals than the non-hemolytic ones. Due to a possible health risk of these pathogenic bacteria, a need exists for an accurate assessment of their acquired resistance to multiple drugs and metals.

Sign in / Sign up

Export Citation Format

Share Document