scholarly journals Population differences in morphological and anatomical traits of Pinus mugo Turra needles from the Polish part of the Tatra Mountains

2017 ◽  
Vol 78 (1) ◽  
pp. 67-76
Author(s):  
Ewa M. Pawlaczyk ◽  
Alina Bączkiewicz ◽  
Piotr Wawrzyniak ◽  
Magdalena Czołpińska ◽  
Patrycja Gonera ◽  
...  
Keyword(s):  
Natural Variation ◽  
Pearson Correlation ◽  
Correlation Coefficients ◽  
Principal Component ◽  
Pinus Mugo ◽  
Tatra Mountains ◽  
Tatra Mts ◽  
The Tatra Mountains ◽  
The Relationship ◽  
Two Populations

Abstract The main aim of this study was to describe the variation between the populations of the dwarf mountain pine Pinus mugo Turra based on the morphological and anatomical traits of their needles, and to investigate the relationship between the observed variation and environmental conditions (altitude and substrate). Two-year-old needles were collected from 180 individuals of six populations of P. mugo growing in the Tatra Mts. Two populations were classified as dense, located at 1360–1450 m altitude, and the remaining four formed loose clusters and were situated at 1500–1650 m altitude. Four of the populations are growing on granite and two on a limestone substrate. The natural variation of 10 morpho-anatomical and 3 synthetic needle traits was measured. In addition to descriptive statistics, the analyses of variance (ANOVA) with a Tukey test and principal component analysis were computed. We also estimated Pearson correlation coefficients for the examined needle traits and altitude as well as substrate. Our results indicate that the P. mugo populations differ significantly with regard to the investigated traits for which the Trzydniowiański Wierch population was the most distinct. The observed pattern of variability is largely caused by differences in stomatal traits and these features are positive correlated with altitude. Additionally, populations growing on granite have larger values for most of the examined traits compared to populations growing on limestone.

Reliability of the Minimum Masking Level as Outcome Variable in Tinnitus Clinical Research

2020 ◽  
Vol 29 (3) ◽  
pp. 429-435
Author(s):  
Patricia C. Mancini ◽  
Richard S. Tyler ◽  
Hyung Jin Jun ◽  
Tang-Chuan Wang ◽  
Helena Ji ◽  
...  
Keyword(s):  
Standard Deviation ◽  
High Frequency ◽  
Pearson Correlation ◽  
Correlation Coefficients ◽  
Outcome Variable ◽  
Reliable Estimate ◽  
Moderate Correlation ◽  
Trained Subjects ◽  
The Relationship ◽  
Minimum Intensity

Purpose The minimum masking level (MML) is the minimum intensity of a stimulus required to just totally mask the tinnitus. Treatments aimed at reducing the tinnitus itself should attempt to measure the magnitude of the tinnitus. The objective of this study was to evaluate the reliability of the MML. Method Sample consisted of 59 tinnitus patients who reported stable tinnitus. We obtained MML measures on two visits, separated by about 2–3 weeks. We used two noise types: speech-shaped noise and high-frequency emphasis noise. We also investigated the relationship between the MML and tinnitus loudness estimates and the Tinnitus Handicap Questionnaire (THQ). Results There were differences across the different noise types. The within-session standard deviation averaged across subjects varied between 1.3 and 1.8 dB. Across the two sessions, the Pearson correlation coefficients, range was r = .84. There was a weak relationship between the dB SL MML and loudness, and between the MML and the THQ. A moderate correlation ( r = .44) was found between the THQ and loudness estimates. Conclusions We conclude that the dB SL MML can be a reliable estimate of tinnitus magnitude, with expected standard deviations in trained subjects of about 1.5 dB. It appears that the dB SL MML and loudness estimates are not closely related.

scholarly journals A new diatom training set for the reconstruction of past water pH in the Tatra Mountain lakes

2021 ◽  
Author(s):  
Elwira Sienkiewicz ◽  
Michał Gąsiorowski ◽  
Ladislav Hamerlík ◽  
Peter Bitušík ◽  
Joanna Stańczak
Keyword(s):  
Surface Sediments ◽  
Tatra Mountains ◽  
Training Set ◽  
Statistical Parameters ◽  
The Past ◽  
Water Ph ◽  
Inferred Ph ◽  
The 1960S ◽  
The Tatra Mountains ◽  
The Relationship

AbstractLakes located in the Polish and Slovak parts of the Tatra Mountains were included in the Tatra diatom database (POL_SLOV training set). The relationship between the diatoms and the water chemistry in the surface sediments of 33 lakes was the basis for the statistical and numerical techniques for quantitative pH reconstruction. The reconstruction of the past water pH was performed using the alpine (AL:PE) and POL_SLOV training sets to compare the reliability of the databases for the Tatra lakes. The results showed that the POL_SLOV training set had better statistical parameters (R2 higher by 0.16, RMSE and max. bias lower by 0.2 and 0.36, respectively) compared to the AL:PE training set. The better performance of the POL_SLOV training set is particularly visible in the case of Przedni Staw Polski where the curve of the inferred water pH shows an opposite trend for the period from the 1960s to 1990 compared to that based on the AL:PE dataset. The reliability of the inferred pH was confirmed by the comparison with current instrumental measurements.

scholarly journals The Relationship Between Soldier Height, Weight and Army Combat Fitness Scores

2021 ◽  
Author(s):  
Ryan Palmer ◽  
Mark DeBeliso
Keyword(s):  
United States Army ◽  
Body Mass ◽  
National Guard ◽  
Pearson Correlation ◽  
Correlation Coefficients ◽  
The United States ◽  
Military Leaders ◽  
Physical Fitness Test ◽  
Fitness Test ◽  
The Relationship

The United States Army recently implemented the Army Combat Fitness Test (ACFT) which was designed to more accurately measure functional-combat fitness constructs. The ACFT replaced the former Army Physical Fitness Test (APFT). The three advent APFT consisted of: two-minute push-ups (PU), two-minute sit-ups (SU), and a timed two-mile run (RUN). The ACFT consists of six events; 3 Rep Max Deadlift (MDL), Standing Power Throw (SPT), Hand Release Push-up (HRP), Sprint-Drag-Carry (SDC), Hanging Leg Tuck (LTK), and a timed two-mile run (2MR). This study investigated the relationship between Soldier height and body mass kg on ACFT scores of 655 male U.S. Army National Guard Soldiers in a Field Artillery Brigade. For the purpose of the investigation body mass index (BMI) was calculated as the metric representing the Soldier(s) height and weight. The mean and standard deviation (sd) were calculated for the ACFT event and total scores. Pearson correlation coefficients (PCCs or r) were calculated between BMI and ACFT event and total scores. Likewise, PCCs were calculated between the ACFT event and total scores. The ACFT mean(sd) scores were as follows: MDL=92.2(31.8) (3 maximum repetitions), SPT=9.5(2.2) (meters), HRP=24.6(13.1) (repetitions), SDC=119.8(21.7) (seconds), LTK=6.2(5.4) (repetitions), 2MR=1095.0(233.7) (seconds), ACFT total score=442.3(54.4) (points). Significant positive correlations were found between the ACFT total score: MDL (r=0.70), SPT (r=0.50), HRP (r=0.74), and LTK (r=0.76) events. Conversely, significant negative correlations were identified between ACFT total score: SDC (r=-0.68) and 2MR (r=-0.53) events. Within the parameters of this study, Soldier BMI demonstrated no to weak association with individual ACFT event or ACFT total scores. Further, the range of PCCs between the ACFT event scores were no to moderately high. Military leaders may consider the results provided as combat and fitness tests continue to evolve.

Evaluation of Cultural Intelligence in Staff of Industries, Mines and Trades Organizations - Case Study

2017 ◽  
pp. 429-438
Author(s):  
Mohammad Abdolshah ◽  
Baranak Geranfar ◽  
Eisa Akbari ◽  
Jalil Vaziri
Keyword(s):  
Organizational Culture ◽  
Correlation Coefficient ◽  
Cultural Intelligence ◽  
Pearson Correlation ◽  
Correlation Coefficients ◽  
Statistical Population ◽  
Key Competencies ◽  
The Relationship ◽  
Personnel Department

This article examines one of the key competencies of the 21st century known as cultural intelligence (CQ). This study investigates the relationship between CQ, organizational culture, and the effectiveness of staff in the industry, mine, and trade organizations of Semnan province in Iran. Using correlational analysis, the statistical population includes a total of 103 people from 141 employees based on personnel department documents. Three questionnaires were used to measure the variables and descriptive and deductive statistics were applied to evaluate and analyze the data. The Pearson correlation coefficient and multivariate regression were used in deductive statistics to obtain the results. The findings show there is a significant relationship between CQ, organizational culture, and effectiveness. Among four cultural intelligence factors, only the knowledge of CQ can predict the effectiveness. The calculated correlation coefficient indicates that the creativity factors and communication pattern have the highest correlation coefficients.

scholarly journals Subfossil chironomids (Diptera, Chironomidae) of lakes in the Tatra Mountains: an illustrated guide

Zootaxa ◽  
2020 ◽  
Vol 4819 (2) ◽  
pp. 216-264
Author(s):  
TÍMEA CHAMUTIOVÁ ◽  
LADISLAV HAMERLÍK ◽  
PETER BITUŠÍK
Keyword(s):  
Surface Sediments ◽  
Type A ◽  
Distribution Patterns ◽  
Type B ◽  
Tatra Mountains ◽  
Broad Distribution ◽  
Subfossil Chironomids ◽  
Carpathian Region ◽  
Tatra Mts ◽  
The Tatra Mountains

Here we present a summary of subfossil chironomids (Diptera: Chironomidae) found in the surface sediments of 52 Tatra Mts. lakes (Slovakia, Poland). Head capsules of 73 morphotypes of 5 subfamilies are described and illustrated. In addition to the previously documented subfossils by Brooks et al. (2007), we present 15 new morphotypes: Diamesa Tatra-type A, Diamesa Tatra-type B, Pseudodiamesa branickii-type, Pseudodiamesa nivosa-type, Pseudokiefferiella parva, Brillia bifida-type, Cricotopus (Paratrichocladius) skirwithensis-type, Cricotopus (Cricotopus) tremulus-type, Cricotopus/Orthocladius I, Eukiefferiella brevicalcar-type, Eukiefferiella claripennis-type B, Orthocladius (Orthocladius) dentifer-type, O. (Mesorthocladius) frigidus, Orthocladius (Euorthocladius) sp. and Tanytarsini indet. Most of these types have possibly broad distribution patterns in Europe. We believe that due to specific features of each region, this paper will serve as a helpful manual for limnologists and paleolimnologists working not only in the Tatra Mts. but also in the whole Carpathian region.

Associations Among the MCMI-II Clinical Syndrome Scales and the MMPI-2 Clinical Scales

Assessment ◽  
1994 ◽  
Vol 1 (4) ◽  
pp. 407-413 ◽  
Author(s):  
Mark A. Blais ◽  
Kenneth B. Benedict ◽  
Dennis K. Norman
Keyword(s):  
Convergent Validity ◽  
Discriminant Validity ◽  
Minnesota Multiphasic Personality Inventory ◽  
Pearson Correlation ◽  
Correlation Coefficients ◽  
Principal Component ◽  
Clinical Syndrome ◽  
Self Report ◽  
Clinical Scales ◽  
Axis I

The Millon Clinical Multiaxial Inventory—II (MCMI-II), a frequently used self-report measure of psychopathology, contains nine scales designed to assess Axis I psychopathology (the clinical syndrome and severe syndrome scales). This study explored the relationships among these nine MCMI-II clinical syndrome scales and the clinical scales of the Minnesota Multiphasic Personality Inventory–2 (MMPI-2). A sample of 108 psychiatric inpatients was administered both the MCMI-II and the MMPI-2 within 7 days of admission. Pearson correlation coefficients and principal component factors were obtained for the MCMI-II and MMPI-2 scales. The results provided support for the convergent validity of all the MCMI-II Axis I scales. However, the majority of the MCMI-II scales failed to demonstrate adequate discriminant validity in relation to the MMPI-2 scales. The principal component analysis revealed that method variance was the principal influence in determining factor loadings for the majority of test scales. This finding suggests that these two popular self-report tests differ substantially in how they measure psychopathology.

Similarities and differences between virtual and actual pants

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Siti Zulaikha Binti Zulkifli ◽  
KyoungOk Kim ◽  
Masayuki Takatera
Keyword(s):  
Sensory Evaluation ◽  
Quantitative Evaluation ◽  
Evaluation Method ◽  
Subjective Evaluation ◽  
Evaluation Criteria ◽  
Correlation Coefficients ◽  
Principal Component ◽  
Content Type ◽  
Similarities And Differences ◽  
The Relationship

PurposeThis study aimed to clarify the criteria for subjective evaluation of the similarities and differences between virtual and actual pants and propose a quantitative evaluation method for those similarities and differences based on geometric features related to the evaluation.Design/methodology/approachUsing patterns, we made five pairs of actual pants for a dummy in five fabrics. We simulated virtual pants with a 3-D simulator. Sensory evaluation was conducted with images of the virtual and actual pants: 20 participants compared the images based on a questionnaire. For the structure of evaluation, the authors undertook analysis of variance and principal component analysis. The actual and virtual pants were geometrically compared using the 3-D scanned data. To investigate the relationship between quantitative and sensory evaluation, the authors calculated the correlation coefficients.FindingsThe authors found that subjects perceived the differences between actual and simulated pants. When comparing the virtual and actual pants, the criteria for the differences were the silhouette from the front view, hem width, waist and wrinkles. Using differences in the hem width, it would be possible to evaluate the differences between actual and simulated pants. Roughness and smoothness of the silhouette also affected evaluation.Originality/valueThe authors clarified the evaluation criteria for the similarities and differences between virtual and actual pants. The authors proposed a quantitative evaluation method for the similarities and differences between virtual and actual garment based on our criteria. This study will be of benefit to 3-D simulator users and developers.

scholarly journals Prediction of crude protein digestibility of animal by-product meals for dogs by the protein solubility in pepsin method

2014 ◽  
Vol 3 ◽  
Author(s):  
Iris M. Kawauchi ◽  
Nilva K. Sakomura ◽  
Cristiana F. F. Pontieri ◽  
Aline Rebelato ◽  
Thaila C. Putarov ◽  
...  
Keyword(s):  
Crude Protein ◽  
Pearson Correlation ◽  
Protein Solubility ◽  
Correlation Coefficients ◽  
Basal Diet ◽  
Protein Digestibility ◽  
Large Variability ◽  
The Relationship

AbstractAnimal by-product meals have large variability in crude protein (CP) content and digestibility. In vivo digestibility procedures are precise but laborious, and in vitro methods could be an alternative to evaluate and classify these ingredients. The present study reports prediction equations to estimate the CP digestibility of meat and bone meal (MBM) and poultry by-product meal (PM) using the protein solubility in pepsin method (PSP). Total tract CP digestibility of eight MBM and eight PM samples was determined in dogs by the substitution method. A basal diet was formulated for dog maintenance, and sixteen diets were produced by mixing 70 % of the basal diet and 30 % of each tested meal. Six dogs per diet were used to determine ingredient digestibility. In addition, PSP of the MBM and PM samples was determined using three pepsin concentrations: 0·02, 0·002 and 0·0002 %. The CP content of MBM and PM ranged from 39 to 46 % and 57 to 69 %, respectively, and their mean CP digestibility by dogs was 76 (2·4) and 85 (2·6) %, respectively. The pepsin concentration with higher Pearson correlation coefficients with the in vivo results were 0·0002 % for MBM (r 0·380; P = 0·008) and 0·02 % for PM (r 0·482; P = 0·005). The relationship between the in vivo and in vitro results was better explained by the following equations: CP digestibility of MBM = 61·7 + 0·2644 × PSP at 0·0002 % (P = 0·008; R2 0·126); and CP digestibility of PM = 54·1 + 0·3833 × PSP at 0·02 % (P = 0·005; R2 0·216). Although significant, the coefficients of determination were low, indicating that the models were weak and need to be used with caution.

scholarly journals Comparative analysis of shell occupation by two southern populations of the hermit crab Loxopagurus loxochelis (Decapoda, Diogenidae)

2012 ◽  
Vol 60 (3) ◽  
pp. 299-310 ◽  
Author(s):  
Luciane Ayres-Peres ◽  
Aline Ferreira Quadros ◽  
Fernando L. Mantelatto
Keyword(s):  
Principal Component Analysis ◽  
Comparative Analysis ◽  
Hermit Crab ◽  
Regression Tree ◽  
Principal Component ◽  
Hermit Crabs ◽  
Pca Analysis ◽  
Internal Volume ◽  
The Relationship ◽  
Two Populations

The present study aimed to comparatively verify the relation between the hermit crabs and the shells they use in two populations of Loxopagurus loxochelis. Samples were collected monthly from July 2002 to June 2003, at Caraguatatuba and Ubatuba Bay, São Paulo, Brazil. The animals sampled had their sex identified, were weighed and measured; their shells were identified, measured and weighed, and their internal volume determined. To relate the hermit crab's characteristics and the shells' variables, principal component analysis (PCA) and a regression tree were used. According to the PCA analysis, the three gastropod shells most frequently used by L. loxochelis varied in size. The regression tree successfully explained the relationship between the hermit crab's characteristics and the internal volume of the inhabited shell. It can be inferred that the relationship between the morphometry of an individual hermit crab and its shell is not straightforward and it is impossible to explain only on the basis of direct correlations between the body's and the shell's attributes. Several factors (such as the morphometry and the availability of the shell, environmental conditions and inter- and intraspecific competition) interact and seem to be taken into consideration by the hermit crabs when they choose a shell, resulting in the diversified pattern of shell occupancy shown here and elsewhere.

Fine laminated clastic deposits revealing the delay of the deglaciation timing in the High Tatras Mts. (Central Europe) to Early Holocene

2020 ◽  
Author(s):  
Dhavamani Ramachandran ◽  
Radovan Pipík ◽  
Timea Chamutiová ◽  
Lucia Žatková ◽  
Marina Vidhya ◽  
...  
Keyword(s):  
Central Europe ◽  
Late Glacial ◽  
Early Holocene ◽  
Age Dating ◽  
Tatra Mountains ◽  
East Central Europe ◽  
Tatra Mts ◽  
Cosmogenic Nuclide Dating ◽  
Late Glacial And Holocene ◽  
The Tatra Mountains

<p>The Tatra moraine relief and cosmogenic nuclide dating show glacier stabilizationand the maximum glacier extent in two phases,at26 – 21 ka and at 18 ka followed by a gradual retreat and  a termination of the glaciation during the Bølling/Allerød warming at 14.64 –12.9 ka (Makos etal., 2014). A renewed glaciation within the Younger Dryas (12.9 – 11.5 ka) formed smaller rock glaciers. This retreat was connected with the formation of the morainic, trough and cirque lakes and the beginning of light-grey silt sedimentation dated from 10ka to 16ka cal BP on the northern slopes of the Tatra Mountains and before 10ka cal BP on its southern slopes (Klapyta et al., 2016).</p><p>A new paleolimnic research led to a discovery of a cyclic fine laminated deposit in the four Tatra Mts. lakes. The laminae of thickness from 1 to 3 mm are built of couplets of light-coloured coarse detrital and fine dark-coloured laminae. Thicker light coloured laminae occasionally show a gradation ending in dark-coloured laminae. Laminae consist occasionally of low spherical angular grains of sand and gravel fractions, rarely up to size 10 mm which deformed underlying laminae. Light-coloured laminae are predominantly composed of quartz, followed by K-feldspar, plagioclase, mica, and clay-like particles. Dark-coloured laminae consist of clay-size clastic particles. These laminae were formed in cold, oxygen-rich, ultra-oligotrophic, slightly acid conditions in which the chironomids Pseudodiamesa nivosa and Micropsectra radialis-type dominated. We interpret these lamination as varves related to annual glacial melting. Once the valleys were ice-free, varve production stopped and a short deposition period of homogenous silt was replaced by gyttja. The radiometric C<sup>14</sup> age dating shows the deglaciation in the Tatra Mts terminated at the beginning of the Early Holocene, around 10ka cal BP – 9ka cal BP.</p><p> </p><p>The research was funded by APVV-15-0292 and the project Centre of Excellence for Integrated Research of the Earth's Geosphere, ITMS 26220120064.</p><p> </p><p>Klapyta P., Zasadni J., Pociask-Karteczka J., Gajda A., Franczak P., 2016. Late Glacial and Holocene Paleoenvironmental records in the Tatra Mountains, East-Central Europe, based on lake, peat bog and colluvial sedimentary data: A summary review. Quaternary International 415: 126-144.</p><p> </p><p>Makos M., Dzierzek J., Nitychoruk J., Zreda M., 2014. Timing of glacier advances and climate in the Tatra Mountains (Western Carpathians) during the Last Glacial Maximum. Quaternary Research 82: 1-13.</p>

Sign in / Sign up

Export Citation Format

Share Document