Negative gravitropism of Ginkgo biloba: growth stress and reaction wood formation

Holzforschung ◽  
2016 ◽  
Vol 70 (3) ◽  
pp. 267-274 ◽  
Author(s):  
Tatsuya Shirai ◽  
Hiroyuki Yamamoto ◽  
Miyuki Matsuo ◽  
Mikuri Inatsugu ◽  
Masato Yoshida ◽  
...  
Keyword(s):  
Ginkgo Biloba ◽  
Lignin Content ◽  
Linear Regression Analysis ◽  
Multiple Linear Regression Analysis ◽  
Wood Formation ◽  
Growth Stress ◽  
Reaction Wood ◽  
Cellulose Content ◽  
S2 Layer ◽  
Negative Gravitropism

Abstract Ginkgo (Ginkgo biloba L.) forms thick, lignified secondary xylem in the cylindrical stem as in Pinales (commonly called conifers), although it has more phylogenetic affinity to Cycadales than to conifers. Ginkgo forms compression wood-like (CW-like) reaction wood (RW) in its inclined stem as it is the case in conifers. However, the distribution of growth stress is not yet investigated in the RW of ginkgo, and thus this tissue resulting from negative gravitropism is still waiting for closer consideration. The present study intended to fill this gap. It has been demonstrated that, indeed, ginkgo forms RW tissue on the lower side of the inclined stem, where the compressive growth stress (CGS) was generated. In the RW, the micorofibril angle in the S2 layer, the air-dried density, and the lignin content increased, whereas the cellulose content decreased. These data are quite similar to those of conifer CWs. The multiple linear regression analysis revealed that the CGS is significantly correlated by the changes in the aforementioned parameters. It can be safely concluded that the negative gravitropism of ginkgo is very similar to that of conifers.

ANATOMY AND CHEMICAL COMPOSITION OF LIRIODENDRON TULIPIFERA STEMS INCLINED AT DIFFERENT ANGLES

IAWA Journal ◽  
2014 ◽  
Vol 35 (4) ◽  
pp. 463-475 ◽  
Author(s):  
Tokiko Hiraiwa ◽  
Haruna Aiso ◽  
Futoshi Ishiguri ◽  
Yuya Takashima ◽  
Kazuya Iizuka ◽  
...  
Keyword(s):  
Lignin Content ◽  
Fibre Length ◽  
Liriodendron Tulipifera ◽  
Original Position ◽  
Chemical Characteristics ◽  
Normal Wood ◽  
Reaction Wood ◽  
Glucose Content ◽  
Wood Fibres ◽  
S2 Layer

The anatomical and chemical characteristics of reaction wood (RW) were investigated in Liriodendron tulipifera Linn. Stems of seedlings were artificially inclined at angles of 30 (RW-30), 50 (RW-50) and 70° (RW-70) from the vertical, and compared with normal wood (NW) from a vertical seedling stem. The smallest values for the wood fibre length and vessel number were observed in RW-50. The pit aperture angle was less than 10° in RW-30 and RW-50, in which reduced lignin content was observed in the S2 layer of the wood fibres. An increase in the glucose content and a decrease in the lignin and xylose content was observed in RW-50. The stem inclination angle affected the degree of RW development with regard to anatomical and chemical characteristics: the severest RW was observed in RW-50, followed by RW-30. RW-70 was similar in anatomical and chemical characteristics to NW, apparently because the inclination was too strong to enable recovery of its original position. In this case a vertical sprouting stem was formed to replace the inclined stem.

Anatomical and chemical factors affecting tensile growth stress in Eucalyptus grandis plantations at different latitudes in Brazil

2012 ◽  
Vol 42 (1) ◽  
pp. 134-140 ◽  
Author(s):  
Miho Kojima ◽  
Hiroyuki Yamamoto ◽  
Koichiro Saegusa ◽  
Fabio Minoru Yamaji ◽  
Masato Yoshida ◽  
...  
Keyword(s):  
Lignin Content ◽  
Microfibril Angle ◽  
Eucalyptus Grandis ◽  
Middle Layer ◽  
Growth Stress ◽  
Cellulose Content ◽  
Factors Affecting ◽  
Wide Range ◽  
Chemical Factors ◽  
Processing Defects

The key to using planted Eucalyptus as timber lies in controlling the characteristic high tensile growth stress that often causes serious processing defects in sawn logs and lumber. In the present study, we investigated variations in the longitudinal released strain (RS) of surface growth stress in stems of Eucalyptus grandis W. Hill ex Maiden planted in a wide range of latitudes in Brazil and established relationships between RS measurements and anatomical and chemical factors. Cellulose and lignin content, RS, and the microfibril angle (MFA) of the middle layer of the secondary wall (S2 layer) differed among latitudes. The increase in cellulose content and decrease in MFA were correlated with the contractive value of RS, which explained the higher tensile growth stress in stems from high-latitude plantations where higher cellulose content and lower MFA were observed. To reduce processing defects due to tensile growth stress, the factors controlling MFA values and cellulose content must be identified.

scholarly journals Significant influence of lignin on axial elastic modulus of poplar wood at low microfibril angles under wet conditions

2019 ◽  
Vol 70 (15) ◽  
pp. 4039-4047 ◽  
Author(s):  
Merve Özparpucu ◽  
Notburga Gierlinger ◽  
Igor Cesarino ◽  
Ingo Burgert ◽  
Wout Boerjan ◽  
...  
Keyword(s):  
Cell Wall ◽  
Lignin Content ◽  
Construction Material ◽  
Linear Regression Analysis ◽  
Microfibril Angle ◽  
Tensile Tests ◽  
Multiple Linear Regression Analysis ◽  
Axial Stiffness ◽  
The Matrix ◽  
The Individual

Abstract Wood is extensively used as a construction material. Despite increasing knowledge of its mechanical properties, the contribution of the cell-wall matrix polymers to wood mechanics is still not well understood. Previous studies have shown that axial stiffness correlates with lignin content only for cellulose microfibril angles larger than around 20°, while no influence is found for smaller angles. Here, by analysing the wood of poplar with reduced lignin content due to down-regulation of CAFFEOYL SHIKIMATE ESTERASE, we show that lignin content also influences axial stiffness at smaller angles. Micro-tensile tests of the xylem revealed that axial stiffness was strongly reduced in the low-lignin transgenic lines. Strikingly, microfibril angles were around 15° for both wild-type and transgenic poplars, suggesting that cellulose orientation is not responsible for the observed changes in mechanical behavior. Multiple linear regression analysis showed that the decrease in stiffness was almost completely related to the variation in both density and lignin content. We suggest that the influence of lignin content on axial stiffness may gradually increase as a function of the microfibril angle. Our results may help in building up comprehensive models of the cell wall that can unravel the individual roles of the matrix polymers.

ECCENTRIC GROWTH AND GROWTH STRESS IN INCLINED STEMS OF GNETUM GNEMON

IAWA Journal ◽  
2015 ◽  
Vol 36 (4) ◽  
pp. 365-377 ◽  
Author(s):  
Tatsuya Shirai ◽  
Hiroyuki Yamamoto ◽  
Masato Yoshida ◽  
Mikuri Inatsugu ◽  
Chisato Ko ◽  
...  
Keyword(s):  
Secondary Xylem ◽  
Secondary Growth ◽  
Microfibril Angle ◽  
Chemical Properties ◽  
Growth Stress ◽  
Reaction Wood ◽  
Wood Fibers ◽  
Gelatinous Fibers ◽  
Gnetum Gnemon ◽  
Negative Gravitropism

Gnetum gnemon L. (Gnetales) forms hardwood-like secondary xylem in its trunks and branches although it is a gymnosperm. The present study tested the surface growth stress in relation to anatomical and chemical properties of the secondary xylem in inclined and vertical stems of G. gnemon using morphological and chemical composition analyses. Secondary growth was promoted on the upper half of the cross section in an inclined stem; at the same time, tensile growth stress increased on the upper side and decreased on the lower side of the inclined stem. However, formation of reaction wood fibers was not detected on either side. The microfibril angle was associated with differences in tensile growth stress. Thus, we conclude that negative gravitropism in G. gnemon is caused by a synergistic effect of increased tensile growth stress as well as the promotion of secondary growth on the upper side of the inclined stem. Our results are comparable to the negative gravitropism observed in the family Magnoliaceae, which does not form gelatinous fibers in its tension wood.

ANATOMY AND LIGNIN DISTRIBUTION OF “COMPRESSION-WOOD-LIKE REACTION WOOD” IN GARDENIA JASMINOIDES

IAWA Journal ◽  
2013 ◽  
Vol 34 (3) ◽  
pp. 263-272 ◽  
Author(s):  
Haruna Aiso ◽  
Tokiko Hiraiwa ◽  
Futoshi Ishiguri ◽  
Kazuya Iizuka ◽  
Shinso Yokota ◽  
...  
Keyword(s):  
Compression Wood ◽  
Lignin Content ◽  
Microfibril Angle ◽  
Normal Wood ◽  
Reaction Wood ◽  
Anatomical Characteristics ◽  
Lignin Distribution ◽  
Gardenia Jasminoides ◽  
S2 Layer ◽  
Secondary Fibre

Anatomical characteristics and lignin distribution of ‘compression-wood-like reaction wood’ in Gardenia jasminoides Ellis were investigated. Two coppiced stems of a tree were artificially inclined to form reaction wood (RW). One stem of the same tree was fixed straight as a control, and referred to as normal wood (NW). Excessive positive values of surface-released strain were measured on the underside of RW stems. Anatomical characteristics of xylem formed on the underside of RW and in NW stems were also observed. The xylem formed on the underside exhibited a lack of S3 layer in the secondary fibre walls, an increase of pit aperture angle in the S2 layer, and an increase in lignin content. Some of the anatomical characteristics observed in the underside xylem resembled compression wood in gymnosperms. These results suggest that the increase of microfibril angle in the secondary wall and an increase in lignin content in angiosperms might be common phenomena resembling compression wood of gymnosperms.

Pengaruh Motivasi Kerja Dan Lingkungan Kerja Terhadap Kinerja Karyawan Bappeda Kabupaten Wonosobo Tahun 2013

2017 ◽  
Vol 1 (2) ◽  
pp. 135-147
Author(s):  
Ary Sutrischastini ◽  
Ratna Setyani
Keyword(s):  
Work Environment ◽  
Work Motivation ◽  
Employee Performance ◽  
Linear Regression Analysis ◽  
Test Validity ◽  
Multiple Linear Regression Analysis ◽  
Reliability Testing ◽  
Evaluation Influence ◽  
Environment Variables ◽  
Research Goal

This research goal is to identification and evaluation influence of work motivation and work environment to employee’s performance in BAPPEDA Kabupaten Wonosobo. The object of this research is 37 employees of Badan Perencanaan Pembangunan Kabupaten Wonosobo. And the location of this research is at Badan Perencanaan Pembangunan Kabupaten Wonosobo. The analysis used is test validity, reliability testing, and test the hypothesis, with the help of the computer program SPSS version 17, using multiple linear regression analysis. Based on calculations of data and analysis used, the regression equation is obtained: Y = 11.733 + 0.320 X1 +0.334 X2 + ε, by using the equation regression analytical method can conclude that (X1) take effect positively against employees performance. With t value in amount of 2,219 (bigger than t in table in amount of 1,690) and significance value in amount of 0,33. By applying significance limited value in amount of 0,05, it means, hypothesis that claim if work motivation take effect against employees performance can be accepted. There is a positive and significant correlation between work environment variables (X2) against employees. With t value in amount of 2,219 (bigger than t in table in amount of 1,690) and significance value in amount of 0,33 (smaller than 0,5). Simultaneously, work motivation take effect positively and significantly against employees performance with the F value in amount of 11,562 (bigger than 0.05), then obtained significance value 0.000. It can be concluded that the work motivation and work environment has a positive and significant influence on employee performance in BAPPEDA Kabupaten Wonosobo.

PENGARUH FAKTOR-FAKTOR INTERNAL PERBANKAN TERHADAP NON PERFORMING FINANCING PADA BANK UMUM SYARIAH

2019 ◽  
Vol 6 (2) ◽  
pp. 115-130
Author(s):  
Eka Ambara Harci Putranta ◽  
Lilik Ambarwati
Keyword(s):  
Linear Regression ◽  
Multiple Linear Regression ◽  
Linear Regression Analysis ◽  
Multiple Linear Regression Analysis ◽  
Capital Adequacy ◽  
Annual Reports ◽  
Regression Methods ◽  
Capital Adequacy Ratio ◽  
Negative Effect ◽  
Independent Variable

The study aims to analyze the influence of internal banking factors in the form of: Capital Adequency Ratio (CAR), Financing to Deposit Ratio (FDR) and Total Assets (TA) to Non Performing Financing at Sharia Banks. This research method used multiple linear regression analysis with the help of SPSS 16.00 software which is used to see the influence between the independent variables in the form of Capital Adequacy Ratio (CAR), Financing to Deposit Ratio (FDR) and Total Assets (TA) to Non Performing Financing. The sample of this study was 3 Islamic Commercial Banks, so there were 36 annual reports obtained through purposive sampling, then analyzed using multiple linear regression methods. The results showed that based on the F Test, the independent variable had an effect on the NPF, indicated by the F value of 17,016 and significance of 0,000, overall the independent variable was able to explain the effect of 69.60%. While based on the partial t test, showed that CAR has a significant negative effect, Total assets have a significant positive effect with a significance value below 0.05 (5%). Meanwhile FDR does not affect NPF.

PENGARUH TRANSPARANSI PENGELOLAAN KEUANGAN DANA DESA DAN PEMBERDAYAAN MASYARAKAT TERHADAP KESEJAHTERAAN MASYARAKAT DESA SIDOHARJO

2020 ◽  
Vol 28 (1) ◽  
pp. 35-50
Author(s):  
Dewi Kusuma Wardani ◽  
Ratih Ranika Putri Utami
Keyword(s):  
Financial Management ◽  
Linear Regression Analysis ◽  
Sampling Technique ◽  
Multiple Linear Regression Analysis ◽  
Community Empowerment ◽  
Primary Data ◽  
Community Members ◽  
The People ◽  
Quantitative Descriptive ◽  
Positive Effect

This study aims to determine the effect of transparency in financial management of village funds and community empowerment on community welfare in Sidoharjo Village, Tepus District, Gunungkidul Regency. This research method uses quantitative descriptive methods and primary data using questionnaires. This study took a sample of residents who were divided into 11 hamlets in Sidoharjo Village, Tepus District, Gunung kidul Regency. The sampling technique is stratified random sampling. Data collection is done by distributing questionnaires directly to people’s homes, attending social gatherings and routine meetings held by community members. It aims to obtain more data from respondents directly. The number of questionnaires processed was 120 questionnaires. Data were analyzed using multiple linear regression analysis. The results of this study indicate that community empowerment has a positive effect on the welfare of the people of Sidoharjo Village, Tepus District, Gunungkidul Regency, while transparency in financial management of village funds does not affect the welfare of the community in Sidoharjo Village, Tepus District, Gunungkidul Regency.

Pengaruh Tekanan Waktu, Locus Of Control , Tindakan Supervisi, Dan Materialitas Terhadap Penghentian Prematur Atas Prosedur Audit Studi Kasus Pada Kantor Akuntan Publik Daerah Istimewa Yogyakarta Tahun 2015

2017 ◽  
Vol 24 (1) ◽  
pp. 35-53
Author(s):  
Sulastiningsih Sulastiningsih ◽  
Intan Ayu Candra
Keyword(s):  
Locus Of Control ◽  
Premature Termination ◽  
Sampling Methods ◽  
Time Pressure ◽  
Linear Regression Analysis ◽  
Multiple Linear Regression Analysis ◽  
Test Reliability ◽  
Friedman Test ◽  
Independent Variables ◽  
Public Accountant

The purpose of this study is to prove: (1) Time pressure, locus of control, the action of supervision and materiality partially affect the premature termination of the audit procedures (2) Time pressure, locus of control, supervision and materiality simultaneously affect the premature termination on the audit procedures. This research was conducted in Public Accountant firm in Yogyakarta region of which total 12 samples of KAP, by distributing 105 questionnaires, and 57 questionnaires were returned (54%). 34 of the returned questionnaires can be processed (34%). The samples in this study were determined by using non-probability sampling, one of purposive sampling methods. Data analysis consisted of: (1) validity test, reliability test and classical assumption. The result showed that the instruments used are quite reliable and valid (2) multiple linear regression analysis. The results are (a) Some of independent variables partially affect premature termination of the audit procedure, while the action of supervision does not influence premature termination of audit procedures (b) All independent variables influence simultaneously to the premature termination of the audit procedures (c) All independent variables showed that as much as 55% it affects on premature termination of the audit procedures, the rest of it are influenced by other variables. (3) Friedman Test. The result shows that there are order of priority of audit procedures being terminated.

Pengaruh Tingkat Literasi Keuangan Syariah dan Kepercayaan Masyarakat terhadap Minat Menabung di Bank Syariah

2020 ◽  
Vol 3 (2) ◽  
pp. 140-153
Author(s):  
Resti Fadhilah Nurrohmah ◽  
Radia Purbayati
Keyword(s):  
Financial Literacy ◽  
Linear Regression Analysis ◽  
Public Trust ◽  
Multiple Linear Regression Analysis ◽  
Primary Data ◽  
Public Confidence ◽  
Islamic Banks ◽  
Variable Level ◽  
Analysis Technique ◽  
The City

The purpose of this study was to study the level of Islamic financial literacy and public confidence in the interest in saving in Islamic banks. The variables in this study are the level of Islamic financial literacy (X1), public trust (X2), and interest in saving (Y).The method of this study is descriptive quantitative approach. The data source of this study are primary data obtained by distributing questionnaires. Respondents taken are residents in the city of Bandung, with samples domiciled in the city of Bandung and at least 17 years old. The data analysis technique uses multiple linear regression analysis. The results showed that the variable level of islamic financial literacy and public trust has positive effect in the interest in saving in Islamic banks. The findings in this study provide a reference to Islamic banks, the level of literacy and public trust regarding interest in saving, therefore Islamic banks must socialize to the public.

Sign in / Sign up

Export Citation Format

Share Document