Second Law Analysis of MHD Squeezing Flow of Casson Fluid Between Two Parallel Disks

2018 ◽  
Vol 16 (6) ◽  
Author(s):  
Odelu Ojjela ◽  
Kesetti Ramesh ◽  
Samir K. Das
Keyword(s):  
Entropy Generation ◽  
Chemical Engineering ◽  
Mhd Flow ◽  
Casson Fluid ◽  
Squeezing Flow ◽  
Bejan Number ◽  
Field Equations ◽  
Linear Ordinary Differential Equations ◽  
Entropy Generation Number ◽  
Parallel Disks

AbstractThe present article deals the entropy generation due to heat and mass transfer of an unsteady MHD flow of a Casson fluid squeezed between two parallel disks. The upper disk is taken to be impermeable and the lower one is porous. The flow field equations are reduced to non-linear ordinary differential equations by using similarity transformations and the resulting ODE problem is solved by shooting technique with Runge-Kutta 4thorder method. The effects of various non dimensional fluid and geometric parameters on the velocity components, temperature, concentration, entropy generation number, Bejan number, skin friction and Nusselt number are illustrated through graphs and tables. It is noticed that the temperature of the fluid is enhanced with Eckert number, whereas the concentration of the fluid decreased with Casson fluid parameter. The present study is applicable to nuclear engineering cooling systems, wire and blade coating, extrusion of polymer fluids, optical fibers, magnetohydrodynamics and optimization of chemical engineering processes.

MHD Flow of Cu-Al2O3/Water Hybrid Nanofluid in Porous Channel: Analysis of Entropy Generation

2017 ◽  
Vol 377 ◽  
pp. 42-61 ◽  
Author(s):  
Sanatan Das ◽  
Rabindra Nath Jana ◽  
Oluwole Daniel Makinde
Keyword(s):  
Entropy Generation ◽  
Mhd Flow ◽  
Transverse Magnetic ◽  
Porous Channel ◽  
Hybrid Nanofluid ◽  
Bejan Number ◽  
Governing Equations ◽  
Transfer Enhancement ◽  
Entropy Generation Number ◽  
Channel Analysis

In this investigation, a magnetohydrodynamic (MHD) flow of AlO /water nanofluid and Cu-AlO /water hybrid nanofluid through a porous channel is analyzed in the presence of a transverse magnetic field. An exact solution of the governing equations has been obtained in closed form. The entropy generation number and the Bejan number are also obtained. The influences of each of the governing parameters on velocity, temperature, entropy generation and Bejan number are displayed graphically and the physical aspects are discussed. In addition, a comparison of the heat transfer enhancement level due to the suspension of AlO and Cu nanoparticles in water as regular nanofluids and as hybrid Cu-AlO /water nanofluid is reported.

scholarly journals Entropy Generation and Bejan Number Analysis of MHD Casson Fluid Flow in a Micro-Channel with Navier Slip and Convective Boundary Conditions

2020 ◽  
Vol 7 (4) ◽  
Author(s):  
M. Venkateswarlu ◽  
P. Bhaskar
Keyword(s):  
Heat Transfer ◽  
Friction Coefficient ◽  
Entropy Generation ◽  
Mhd Flow ◽  
Casson Fluid ◽  
Skin Friction Coefficient ◽  
Bejan Number ◽  
Micro Channel ◽  
Convective Boundary Conditions ◽  
Convective Boundary

The analysis of MHD flow has been a concern of consideration for research scientists and engineers. In this treatise, the steady MHD flow of an incompressible and electrically conducting Casson fluid in a micro-channel with heat generation and viscous dissipation, in the presence of hydrodynamic slip and convective boundary conditions, is examined. Exact solutions of non-dimensional steady governing equations are obtained in closed form. Transient fluid velocity, temperature, entropy generation, and Bejan number are depicted by the line graphs whereas rate of heat transfer and skin-friction coefficient are computed in tabular form for pertinent flow parameters. It is established that the entropy generation rate and Bejan number increases for increasing values of the Casson parameter and heat generation parameter. In particular, the Casson parameter accelerates the skin-friction coefficient while it provides resistance to the rate of heat transfer near the channel walls. Casson fluid finds significant applications in biomechanics, polymer processing industries, and food processing.

scholarly journals Entropy Generation in MHD Conjugate Flow with Wall Shear Stress over an Infinite Plate: Exact Analysis

Entropy ◽  
2019 ◽  
Vol 21 (4) ◽  
pp. 359 ◽  
Author(s):  
Arshad Khan ◽  
Faizan ul Karim ◽  
Ilyas Khan ◽  
Tawfeeq Alkanhal ◽  
Farhad Ali ◽  
...  
Keyword(s):  
Shear Stress ◽  
Wall Shear Stress ◽  
Entropy Generation ◽  
Infinite Plate ◽  
Mhd Flow ◽  
Bejan Number ◽  
Grashof Number ◽  
Entropy Generation Number ◽  
Mass And Heat Transfer ◽  
Wall Shear

The current work will describe the entropy generation in an unsteady magnetohydrodynamic (MHD) flow with a combined influence of mass and heat transfer through a porous medium. It will consider the flow in the XY plane and the plate with isothermal and ramped wall temperature. The wall shear stress is also considered. The influences of different pertinent parameters on velocity, the Bejan number and on the total entropy generation number are reported graphically. Entropy generation in the fluid is controlled and reduced on the boundary by using wall shear stress. It is observed in this paper that by taking suitable values of pertinent parameters, the energy losses in the system can be minimized. These parameters are the Schmitt number, mass diffusion parameter, Prandtl number, Grashof number, magnetic parameter and modified Grashof number. These results will play an important role in the heat flow of uncertainty and must, therefore, be controlled and managed effectively.

scholarly journals Entropy Generation on MHD Flow and Heat Transfer of Non-Newtonian Fluid Flow Over a Non-Linear Radially Stretching Sheet

2018 ◽  
Vol 7 (4.10) ◽  
pp. 863
Author(s):  
S. Sreenadh ◽  
V. Ramesh Babu ◽  
G. Gopi Krishna ◽  
S. R.Mishra ◽  
A. N.S.Srinivas
Keyword(s):  
Newtonian Fluid ◽  
Entropy Generation ◽  
Stretching Sheet ◽  
Magnetic Parameter ◽  
Mhd Flow ◽  
Physical Parameters ◽  
Bejan Number ◽  
Entropy Generation Number ◽  
Non Linear ◽  
Flow Phenomena

An investigation is made for analyzing the behavior of MHD flow phenomena of a non-Newtonian fluid over a non-linear radially stretching sheet by using numerical technique. Magnetic field is considered in normal direction to the stretching sheet. With use of similarity transformations, the pdes are transformed into odes. The solution of theses odes are performed by using fourth order Runge - Kutta method along with shooting technique. The significance of different physical parameters characterizes the flow phenomena are analyzed with the use of graphs. The Jeffrey parameter  and magnetic parameter  has significant effect on velocity and temperature distribution over a non-linear stretching sheet. It is noticed that, the higher magnetic parameter results the increase in entropy generation number where the opposite nature is noticed in the case of Bejan number.  

scholarly journals Entropy generation analysis for MHD flow of water past an accelerated plate

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Tarek N. Abdelhameed
Keyword(s):  
Magnetic Field ◽  
Entropy Generation ◽  
Transfer Problem ◽  
Finite Difference Methods ◽  
Mhd Flow ◽  
Bejan Number ◽  
Physical Conditions ◽  
Flow Parameters ◽  
The Laplace Transform ◽  
Constant Heating

AbstractThis article examines the entropy generation in the magnetohydrodynamics (MHD) flow of Newtonian fluid (water) under the effect of applied magnetic in the absence of an induced magnetic field. More precisely, the flow of water is considered past an accelerated plate such that the fluid is receiving constant heating from the initial plate. The fluid disturbance away from the plate is negligible, therefore, the domain of flow is considered as semi-infinite. The flow and heat transfer problem is considered in terms of differential equations with physical conditions and then the corresponding equations for entropy generation and Bejan number are developed. The problem is solved for exact solutions using the Laplace transform and finite difference methods. Results are displayed in graphs and tables and discussed for embedded flow parameters. Results showed that the magnetic field has a strong influence on water flow, entropy generation, and Bejan number.

Thermodynamic optimization of nanofluid flow over a non-isothermal wedge with nonlinear radiation and activation energy

2021 ◽  
Author(s):  
M R Acharya ◽  
P Mishra ◽  
Satyananda Panda
Keyword(s):  
Heat Transfer ◽  
Activation Energy ◽  
Reynolds Number ◽  
Entropy Generation ◽  
Volume Fraction ◽  
Mathematical Formulation ◽  
Bejan Number ◽  
Nanofluid Flow ◽  
Entropy Generation Number ◽  
Generation Number

Abstract This paper analyses the augmentation entropy generation number for a viscous nanofluid flow over a non-isothermal wedge including the effects of non-linear radiation and activation energy. We discuss the influence of thermodynamically important parameters during the study, namely, the Bejan number, entropy generation number, and the augmentation entropy generation number. The mathematical formulation for thermal conductivity and viscosity of nanofluid for Al2O3 − EG mixture has been considered. The results were numerically computed using implicit Keller-Box method and depicted graphically. The important result is the change in augmentation entropy generation number with Reynolds number. We observed that adding nanoparticles (volume fraction) tend to enhance augmentation entropy generation number for Al2O3 − EG nanofluid. Further, the investigation on the thermodynamic performance of non-isothermal nanofluid flow over a wedge reveals that adding nanoparticles to the base fluid is effective only when the contribution of heat transfer irreversibility is more than fluid friction irreversibility. This work also discusses the physical interpretation of heat transfer irreversibility and pressure drop irreversibility. This dependency includes Reynolds number and volume fraction parameter. Other than these, the research looked at a variety of physical characteristics associated with the flow of fluid, heat and mass transfer.

Entropy Generation on Maxwell Fluid Flow Past an Inclined Stretching Plate with Slip and Convective Surface Conditon: Darcy-Forchheimer Model

2019 ◽  
Vol 26 ◽  
pp. 62-83
Author(s):  
Tunde Abdulkadir Yusuf ◽  
Jacob Abiodun Gbadeyan
Keyword(s):  
Porous Medium ◽  
Differential Equations ◽  
Entropy Generation ◽  
Mhd Flow ◽  
Maxwell Fluid ◽  
Entropy Generation Rate ◽  
Physical Parameters ◽  
Convective Boundary ◽  
Linear Ordinary Differential Equations ◽  
Non Linear

In this study the effect of entropy generation on two dimensional magnetohydrodynamic (MHD) flow of a Maxwell fluid over an inclined stretching sheet embedded in a non-Darcian porous medium with velocity slip and convective boundary condition is investigated. Darcy-Forchheimer based model was employed to describe the flow in the porous medium. The non-linear thermal radiation is also taken into account. Similarity transformation is used to convert the non-linear partial differential equations to a system of non-linear ordinary differential equations. The resulting transformed equations are then solved using the Homotopy analysis method (HAM). Influence of various physical parameters on the dimensionless velocity profile, temperature profile and entropy generation are shown graphically and discussed in detail while the effects of these physical parameters on velocity gradient and temperature gradient are aided with the help of Table. Furthermore, comparison of some limiting cases of this model was made with existing results. The results obtained are found to be in good agreement with previously published results. Moreover, increase in local inertial coefficient parameter is found to decrease the entropy generation rate.

Entropy generation and heat transport analysis of Casson fluid flow with viscous and Joule heating in an inclined porous microchannel

2019 ◽  
Vol 233 (5) ◽  
pp. 1173-1184 ◽  
Author(s):  
BJ Gireesha ◽  
CT Srinivasa ◽  
NS Shashikumar ◽  
Madhu Macha ◽  
JK Singh ◽  
...  
Keyword(s):  
Fluid Flow ◽  
Entropy Generation ◽  
Convective Boundary Condition ◽  
Casson Fluid ◽  
Entropy Generation Rate ◽  
Bejan Number ◽  
Convective Boundary ◽  
Electrically Conducting ◽  
Number Formula ◽  
The Impact

The combined effects of the magnetic field, suction/injection, and convective boundary condition on heat transfer and entropy generation in an electrically conducting Casson fluid flow through an inclined porous microchannel are scrutinized. The temperature-dependent heat source is also accounted. Numerical simulation for the modelled problem is presented via Runge–Kutta–Felhberg-based shooting technique. Special attention is given to analyze the impact of involved parameters on the profiles of velocity [Formula: see text], temperature [Formula: see text], entropy generation [Formula: see text], and Bejan number [Formula: see text]. It is established that entropy generation rate decreases at the walls with an increase in Hartmann number [Formula: see text], while it increases at the center region of the microchannel.

Sign in / Sign up

Export Citation Format

Share Document