Biodiesel production using immobilized lipase supported on a zirconium-pillared clay. Effect of the immobilization method

2018 ◽  
Vol 16 (11) ◽  
Author(s):  
J.A. Colín-Luna ◽  
E.G. Zamora-Rodea ◽  
M.M. González-Brambila ◽  
E. Barrera-Calva ◽  
R. Rosas-Cedillo ◽  
...  
Keyword(s):  
Edible Oils ◽  
Low Cost ◽  
Immobilized Lipase ◽  
Methyl Esters ◽  
Cost Effective ◽  
Pillared Clay ◽  
Biodiesel Production ◽  
Low Energy Consumption ◽  
Rivers And Lakes ◽  
Heterogeneous Phase

AbstractEdible oils, used in restaurants and households, have become a potential source of environmental pollution because their residuals are indiscriminately poured into rivers and lakes. One cost-effective and sustainable way to treat this waste is using this biomass in the production of biofuels, such as biodiesel. The main reactions for obtaining biodiesel are catalyzed in a homogeneous phase, using basic or acid solutions (NaOH or H2SO4, respectively) or in a heterogeneous phase, using a porous material with or without metals. One interesting reaction, owing to its low energy consumption, is carried out using biocatalysts of enzymes immobilized in porous materials. In this work, a porcine pancreatic lipase (PPL) was immobilized in a zirconium-pillared clay (Zr-PILC) by means of two syntheses: adsorption (PPL/Zr-PILC ADS) and cross-linking (PPL/Zr-PILC CL). The biocatalysts were used in the transesterification of canola oil. The amount of methyl esters was produced in the order Zr-PILC ≈ PPL ≪ PPL/Zr-PILC CL ≪ PPL/Zr-PILC ADS. According to these results, the activity and selectivity are a function of the method of synthesis and show the potential of these biocatalysts to transform waste oil in biodiesel at low cost by means of a sustainable process.

Studies on optimization of transesterification of certain oils to produce biodiesel

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Edible Oils ◽  
Combustion Engine ◽  
Methyl Esters ◽  
Cetane Number ◽  
Cost Effective ◽  
Edible Oil ◽  
Biodiesel Production ◽  
Environment Friendly ◽  
Promising Alternative ◽  
Qualitative And Quantitative

The oil seed production in the country presently meets only 60-70% of its total edible oil requirements and the rest is met through imports. India also has a potential of collecting 5 million tons of tree-borne oilseeds (TBO) of which only one million tons are being collected presently. The consumption of edible oil is very high in the country and still the indigenous production does not meet the demand and considerable amount of edible oil is imported and it is therefore, not advisable to divert these sources for biodiesel production. On the other hand, the non-edible oil resources can be a solution for biodiesel production. Non- edible oil from the plant seeds is the most promising alternative fuel for internal combustion engine because it is renewable, environment friendly, non-toxic, biodegradable has no sulphur and aromatics, has favourable combustion value and higher cetane number. Extensive work has been done on the transesterification of non-edible oils; however, no significant work has been done on the optimization of transesterification process, oil characterization and fuel analysis of most of the non-edible seed oils. In the present work, optimization of transesterification process and analysis of biodiesel from non-edible oil was done; based on optimized protocol for biodiesel production from non-edible oilseeds of Neem and Pongamia converted into fatty acid methyl esters (FAME) through base catalyzed transesterification using an optimum ratio of 1:6 (Oil : Methanol) at 60oC. Biodiesel from these sources was analyzed for qualitative and quantitative characterization by using, GC-MS and FT-IR techniques. Based on qualitative and quantitative analysis of biodiesel, it is concluded that the biodiesel from these species can be feasible, cost effective and environment friendly.

scholarly journals Trends in Widely Used Catalysts for Fatty Acid Methyl Esters (FAME) Production: A Review

Catalysts ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 1085
Author(s):  
Shafaq Nisar ◽  
Muhammad Asif Hanif ◽  
Umer Rashid ◽  
Asma Hanif ◽  
Muhammad Nadeem Akhtar ◽  
...  
Keyword(s):  
Fatty Acid ◽  
Large Scale ◽  
Heterogeneous Catalysts ◽  
Fatty Acid Methyl Esters ◽  
Low Cost ◽  
Methyl Esters ◽  
Acid Catalyst ◽  
Product Formation ◽  
Biodiesel Production ◽  
Acid Methyl

The effective transesterification process to produce fatty acid methyl esters (FAME) requires the use of low-cost, less corrosive, environmentally friendly and effective catalysts. Currently, worldwide biodiesel production revolves around the use of alkaline and acidic catalysts employed in heterogeneous and homogeneous phases. Homogeneous catalysts (soluble catalysts) for FAME production have been widespread for a while, but solid catalysts (heterogeneous catalysts) are a newer development for FAME production. The rate of reaction is much increased when homogeneous basic catalysts are used, but the main drawback is the cost of the process which arises due to the separation of catalysts from the reaction media after product formation. A promising field for catalytic biodiesel production is the use of heteropoly acids (HPAs) and polyoxometalate compounds. The flexibility of their structures and super acidic properties can be enhanced by incorporation of polyoxometalate anions into the complex proton acids. This pseudo liquid phase makes it possible for nearly all mobile protons to take part in the catalysis process. Carbonaceous materials which are obtained after sulfonation show promising catalytic activity towards the transesterification process. Another promising heterogeneous acid catalyst used for FAME production is vanadium phosphate. Furthermore, biocatalysts are receiving attention for large-scale FAME production in which lipase is the most common one used successfully This review critically describes the most important homogeneous and heterogeneous catalysts used in the current FAME production, with future directions for their use.

scholarly journals Chemical and Biological Investigation of Organic Wastes of Frying Oils and Beef Fats: Valorization for Biodiesel Production

2018 ◽  
Vol 2018 ◽  
pp. 1-9 ◽  
Author(s):  
Yasmine Souissi ◽  
Meha Alouini ◽  
Wissem Mnif
Keyword(s):  
Raw Materials ◽  
Low Cost ◽  
Methyl Esters ◽  
Organic Wastes ◽  
Biodiesel Production ◽  
Biological Investigation ◽  
Frying Oils ◽  
Enzymatic Transesterification ◽  
Different Sources

The present study investigates the different approaches of biodiesel production by exploiting low cost feedstocks such as organic wastes of frying oils (WFO) and wastes of beef fats (WBF). The aim was to compare not only two different sources of waste raw materials but also different approaches of biodiesel production. Biodiesel which refers to fatty acid methyl esters (FAME) was produced by both chemical and enzymatic transesterification. The characterization of the biodiesel produced by both approaches was performed according to the European standard EN 14214. The results showed that the biological method gave a richer FAME biodiesel through the catalysis of whole-cell lipase. However, for the chemical method, better biodiesel physicochemical properties were observed for the two raw materials. Therefore, it would be interesting to compromise by optimizing the biological biodiesel production approach in order to obtain a better quality in coherence with EN 14214 requirements.

scholarly journals Integrated bioprocess for conversion of gaseous substrates to liquids

2016 ◽  
Vol 113 (14) ◽  
pp. 3773-3778 ◽  
Author(s):  
Peng Hu ◽  
Sagar Chakraborty ◽  
Amit Kumar ◽  
Benjamin Woolston ◽  
Hongjuan Liu ◽  
...  
Keyword(s):  
Acetic Acid ◽  
Synthesis Gas ◽  
Large Scale ◽  
Low Cost ◽  
Cost Effective ◽  
Integrated System ◽  
Biodiesel Production ◽  
Liquid Fuels ◽  
Acid Product ◽  
The Individual

In the quest for inexpensive feedstocks for the cost-effective production of liquid fuels, we have examined gaseous substrates that could be made available at low cost and sufficiently large scale for industrial fuel production. Here we introduce a new bioconversion scheme that effectively converts syngas, generated from gasification of coal, natural gas, or biomass, into lipids that can be used for biodiesel production. We present an integrated conversion method comprising a two-stage system. In the first stage, an anaerobic bioreactor converts mixtures of gases of CO2 and CO or H2 to acetic acid, using the anaerobic acetogen Moorella thermoacetica. The acetic acid product is fed as a substrate to a second bioreactor, where it is converted aerobically into lipids by an engineered oleaginous yeast, Yarrowia lipolytica. We first describe the process carried out in each reactor and then present an integrated system that produces microbial oil, using synthesis gas as input. The integrated continuous bench-scale reactor system produced 18 g/L of C16-C18 triacylglycerides directly from synthesis gas, with an overall productivity of 0.19 g⋅L−1⋅h−1 and a lipid content of 36%. Although suboptimal relative to the performance of the individual reactor components, the presented integrated system demonstrates the feasibility of substantial net fixation of carbon dioxide and conversion of gaseous feedstocks to lipids for biodiesel production. The system can be further optimized to approach the performance of its individual units so that it can be used for the economical conversion of waste gases from steel mills to valuable liquid fuels for transportation.

scholarly journals CHORUME COMO FONTE DE NUTRIENTE NA PRODUÇÃO DA BIOMASSA MICROALGAL

e-xacta ◽  
2020 ◽  
Vol 12 (2) ◽  
pp. 11
Author(s):  
Najla Postaue ◽  
Leila Cristina Moraes ◽  
Rosa Maria Farias Asmus
Keyword(s):  
Fatty Acids ◽  
Culture Media ◽  
Biomass Conversion ◽  
Low Cost ◽  
Methyl Esters ◽  
Saturated Fatty Acids ◽  
Biodiesel Production ◽  
Microalgae Cultivation ◽  
Microalgal Biomass ◽  
Promising Source

A biomassa de microalgas tem apresentado potencial para produção de biodiesel, contudo a viabilidade do cultivo de microalgas depende de fonte de nutrientes de baixo custo. O presente estudo objetivou utilizar o chorume como fonte de nutrientes para microalgas. Os experimentos foram conduzidos visando avaliar a obtenção da biomassa microalgal, conversão de lipídios e rendimento em ésteres metílicos de ácidos graxos, para os meios de cultivos utilizando 5%, 12% e 20% de chorume, com concentrações de 0,02, 0,05 e 0,08 g N. L-1 e para meio de controle contendo 1% de, Nitrogênio (N), Fósforo (P) e Potássio (K), na concentração de 20 g L-1, 5 g L-1 e 20 g L-1, respectivamente. A microalga utilizada neste trabalho foi a de classe Chlorophyceae e família Coccomyxaceae. Os resultados demonstraram que o meio com concentração de 12% de chorume obteve melhores resultados, possibilitando alcançar 1,19 g de biomassa, conversão de 108,15 mg g-1 de lipídios e conteúdo de ésteres de 410,77mg g-1, a microalga utilizada apresentou ainda predominância dos ácidos graxos palmítico e oleico, apresentando baixa quantidade de ácidos graxos saturados o que pode fornecer ao combustível, resistência ao frio. E tais aspectos demonstraram que o chorume pode ser uma fonte promissora de nutrientes para o cultivo das microalgas estudadas. AbstractMicroalgae biomass has presented potential for biodiesel production, however the viability of microalgae cultivation depends on low cost nutrient source. The present study aimed to use leachate as a source of nutrients for microalgae. The experiments were conducted to evaluate the microalgal biomass, lipid conversion and yield in fatty acid methyl esters, for the culture media using 5%, 12% and 20% leachate, with concentrations of 0.02, 0.05 and 0.08 g N. L-1 and for control medium containing 1% Nitrogen (N), Phosphorus (P) and Potassium (K), at a concentration of 20 g L-1, 5 g L-1 and 20 g L-1, respectively. The microalgae used in this work was Chlorophyceae class and Coccomyxaceae family. The results showed that the medium with a concentration of 12% of leachate obtained better results, allowing to reach 1.19 g of biomass, conversion of 108.15 mg g-1 of lipids and esters content of 410,77 mg g-1. The microalgae used also presented predominance of palmitic and oleic fatty acids, presenting low amount of saturated fatty acids which can provide the fuel with cold resistance. And these aspects demonstrated that the leachate can be a promising source of nutrients for the cultivation of the studied microalgae.

scholarly journals Microwave Spoof Surface Plasmon Polariton-Based Sensor for Ultrasensitive Detection of Liquid Analyte Dielectric Constant

Sensors ◽  
2021 ◽  
Vol 21 (16) ◽  
pp. 5477
Author(s):  
Ivana Podunavac ◽  
Vasa Radonic ◽  
Vesna Bengin ◽  
Nikolina Jankovic
Keyword(s):  
Dielectric Constant ◽  
Surface Plasmon ◽  
Edible Oils ◽  
Low Cost ◽  
High Sensitivity ◽  
Cost Effective ◽  
Ultrasensitive Detection ◽  
Sensing Platform ◽  
Excellent Candidate ◽  
Plasmon Polaritons

In this paper, a microwave microfluidic sensor based on spoof surface plasmon polaritons (SSPPs) was proposed for ultrasensitive detection of dielectric constant. A novel unit cell for the SSPP structure is proposed and its behaviour and sensing potential analysed in detail. Based on the proposed cell, the SSPP microwave structure with a microfluidic reservoir is designed as a multilayer configuration to serve as a sensing platform for liquid analytes. The sensor is realized using a combination of rapid, cost-effective technologies of xurography, laser micromachining, and cold lamination bonding, and its potential is validated in the experiments with edible oil samples. The results demonstrate high sensitivity (850 MHz/epsilon unit) and excellent linearity (R2 = 0.9802) of the sensor, which, together with its low-cost and simple fabrication, make the proposed sensor an excellent candidate for the detection of small changes in the dielectric constant of edible oils and other liquid analytes.

scholarly journals Immobilization of Lipase on Silver Nanoparticles via Adhesive Polydopamine for Biodiesel Production

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Kanchana Dumri ◽  
Dau Hung Anh
Keyword(s):  
Silver Nanoparticles ◽  
Soybean Oil ◽  
Low Cost ◽  
Immobilized Lipase ◽  
Complex Surface ◽  
Biodiesel Production ◽  
Alternative Source ◽  
Covalent Bonds ◽  
Chromatography Analysis ◽  
Vis Spectroscopy

Biodiesel production technology is competitive in terms of low cost and alternative source of energy which should be not only sustainable but also environmentally friendly. Designing of the lipase immobilization for biodiesel production has a remarkable impact and is still challenging. In this work, biodiesel production from soybean oil was enhanced and facilitated by using a novel biocatalyst consisting of commercial lipase (EC 3.1.1.3), silver nanoparticles, and polydopamine. Silver nanoparticles (AgNPs) were synthesized with a size range of 10–20 nm. Polydopamine (PD) was delivered by the self-polymerization of dopamine in 10 mM Tris-HCl pH 8.5 and simultaneously coated the AgNPs to form a PD/AgNPs complex. Lipase was immobilized on the PD/AgNPs complex surface via covalent bonds to form a tailor-made biocatalyst consisting of immobilized lipase/PD/AgNPs complex (LPA). The formation and morphology of each composition were characterized by UV-Vis spectroscopy and scanning electron microscope (SEM). Significantly, gas chromatography analysis showed a remarkable biodiesel production yield of 95% by using the LPA complex at 40°C for 6-hours reaction time, whereas the yield was 86% when using free lyophilized lipase. The LPA complex was apparently reusable after 7 batches and the latter conversion rate of soybean oil was decreased by only 27%.

scholarly journals Strategies for increasing lipid accumulation and recovery from Y. lipolytica: A review

OCL ◽  
2021 ◽  
Vol 28 ◽  
pp. 51
Author(s):  
Sally El Kantar ◽  
Anissa Khelfa ◽  
Eugène Vorobiev ◽  
Mohamed Koubaa
Keyword(s):  
Lipid Accumulation ◽  
Fossil Fuel ◽  
Low Cost ◽  
Operating Cost ◽  
Cost Effective ◽  
Biodiesel Production ◽  
Cultivation Conditions ◽  
Oleaginous Yeasts ◽  
Fermentation Conditions ◽  
High Lipid

Microbial-based biodiesel is produced by transesterification of lipids extracted from microbial cells, and is considered as a potential replacement of fossil fuel due to its advantages in reducing greenhouse gas emissions. Yarrowia lipolytica is one of the most studied oleaginous yeasts able to produce lipids under some fermentation conditions and is considered as a potential industrial host for biodiesel production. Several approaches have been evaluated to increase the economical attraction of biodiesel production from Y. lipolytica lipids. In this review, we highlighted the different strategies reported in the literature, allowing this yeast to achieve high lipid accumulation. These include metabolic engineering strategies, the use of low-cost effective substrates, and the optimization of the cultivation conditions for higher lipid productivity and less operating cost. We also summarized the most effective cell disruption technologies that improve the extraction efficiencies of lipids from Y. lipolytica.

scholarly journals Biodiesel (Methyl Esters)

2021 ◽  
Vol 3 (1) ◽  
pp. 30-43
Author(s):  
Nurul Aina Nasriqah Binti Ma’arof ◽  
Noor Hindryawati ◽  
Siti Norhafiza Mohd Khazaai ◽  
Prakash Bhuyar ◽  
Mohd Hasbi Ab. Rahim ◽  
...  
Keyword(s):  
Heterogeneous Catalysts ◽  
Solid Acid ◽  
Raw Materials ◽  
Methyl Esters ◽  
Cost Effective ◽  
Homogeneous System ◽  
Biodiesel Production ◽  
Solid Acid Catalysts ◽  
Acid Catalysts ◽  
Esterification Reactions

Biodiesel, an environmentally friendly biomass-based fuel, is gaining popularity globally as a cost-effective way to meet rising fuel demand. However, the high cost of raw materials and catalysts continues to drive up biodiesel production. An alternative feedstock with a heterogeneously catalyzed reaction could be the most cost-effective way to stabilize industrial biodiesel growth. Understanding these issues led to the idea of using waste palm oil as a feedstock for biodiesel production. While using waste materials as feedstock for biodiesel is an elegant solution, converting high free fatty acids (FFA) directly into methyl esters has some drawbacks. High FFA processes (acid esterification, then base transesterification) are costly. The commercial processes currently use a homogeneous system with sulfuric acid to catalyze both esterification and transesterification. However, heterogeneous solid acid catalysts are preferred over hazardous mineral acids for high FFA esterification because they are less corrosive, produce less waste, and are easier to separate from reactants and products by filtration, recovery, and reusability. Heterogeneous acid catalysts can also simultaneously catalyze transesterification and esterification reactions. Thus, new waste-based support for heterogeneous catalysts (solid acid catalysts) is required to convert waste oils into biodiesel.

scholarly journals The potential biodiesel production from Cerbera odollam oil (Bintaro) in Aceh

2018 ◽  
Vol 159 ◽  
pp. 01049 ◽  
Author(s):  
Khairil ◽  
Aulia Rizki ◽  
Iskandar ◽  
Jalaluddin ◽  
A.S. Silitonga ◽  
...  
Keyword(s):  
Vegetable Oils ◽  
Edible Oils ◽  
Methyl Esters ◽  
Oxidation Stability ◽  
Acid Catalyst ◽  
Acid Value ◽  
Biodiesel Production ◽  
Alkaline Catalyst ◽  
Heating Value ◽  
Future Production

Biodiesel production from non-edible vegetable oils is an effective way to conquer the linked problems with edible oils such as food versus fuel and other environmental impacts. Cerbera odollam oil is one of these possible non-edible feed stocks for future biodiesel production. This study evaluated the potential biodiesel production from cerbera odollam. The seed was collected and extracted from Aceh, Indonesia. Moreover, biodiesel has been produced using degummed (H3PO4) and two step acid catalyst (HCl) and alkaline catalyst (KOH). The results of properties of the cerbera odollam methyl esters show that such as viscosity was about 847.9 mm2/s, density was 3.1578 kg/m3, flash point was 214.0°C, acid value was 0.4 mg KOH/g, oxidation stability was 6.35 h, FAME content was 97.77 % w/w and heating value was 40.49 MJ/kg. After analysing these properties, it has been found that there is a huge chance to produce biodiesel from this seed which complies with the limits of ASTM 6751 and EN 14214 specifications and therefore it can boost the future production of biodiesel from non-edible sources.

Sign in / Sign up

Export Citation Format

Share Document