scholarly journals Electrical characteristics of PVA-PANI-ZnS nanocomposite film synthesized by gamma irradiation method

2018 ◽  
Vol 36 (1) ◽  
pp. 102-106 ◽  
Author(s):  
Afarin Bahrami ◽  
Kasra Behzad ◽  
Nastaran Faraji ◽  
Alireza Kharazmi
Keyword(s):  
Gamma Irradiation ◽  
Chemical Structure ◽  
Nanocomposite Films ◽  
Electrical Characteristics ◽  
Frequency Range ◽  
Vis Spectroscopy ◽  
Ft Ir ◽  
Lcr Meter ◽  
Different Doses ◽  
Ft Ir Spectroscopy

Abstract This work presents the synthesis of PANI-PVA-ZnS nanocomposite films by gamma irradiation approach. The samples were irradiated with different doses ranging from 10 kGy to 40 kGy. Subsequently, structural, morphological, optical and electrical characteristics of the samples were investigated. Fourier transform infrared (FT-IR) spectroscopy was employed to study the chemical structure of the samples. Field emission scanning electron microscopy (FE-SEM) was used to investigate the morphology of nanocomposites. The electronic absorption characteristics of the samples were measured by means of UV-Vis spectroscopy. The AC and DC electrical behaviors of the samples were characterized using LCR meter in the frequency range of 20 Hz to 1 MHz. The impedance values of the samples were extracted from Cole-Cole plots and consequently DC conductivity was calculated.

scholarly journals Synthesis of L-DOPA Based Melanins with Reproducible Physic-Chemical Properties

2018 ◽  
Author(s):  
Koen Vercruysse ◽  
Jayla Moore
Keyword(s):  
Ir Spectroscopy ◽  
Enzymatic Synthesis ◽  
Chemical Properties ◽  
Size Exclusion ◽  
Synthesis Methods ◽  
Ongoing Research ◽  
Vis Spectroscopy ◽  
Exclusion Chromatography ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

This report expands our ongoing research efforts into the non-enzymatic synthesis of melanins. We have explored four different methods for the synthesis of L-DOPA based melanins and evaluated the reproducibility of some of their physic-chemical properties. The melanins were synthesized through the addition of NaOH, tyrosinate or Fe<sup>2+</sup>/H<sub>2</sub>O<sub>2</sub>. Two different approaches for the reactions involving Fe<sup>2+</sup> and H<sub>2</sub>O<sub>2</sub> were tested: a) addition of H<sub>2</sub>O<sub>2</sub> spread out over multiple days or b) addition of H<sub>2</sub>O<sub>2</sub> in one fraction at the start of the reaction. The physic-chemical properties of the melanins explored involved: 1) retention on size exclusion chromatography column, 2) FT-IR spectroscopy, 3) UV-Vis spectroscopy and 4) the capacity to reduce a redox dye, dichlorophenolindophenol. Overall the results obtained indicated that 1) the various synthesis methods lead to melanins with reproducible physic-chemical properties, 2) that the melanins synthesized in the presence of Fe<sup>2+</sup>/H<sub>2</sub>O<sub>2</sub> are distinctly different from the melanins synthesized in the presence of NaOH or tyrosinate and 3) that no distinctly different melanins were generated when comparing the two different synthesis approaches involving Fe<sup>2+</sup>/H<sub>2</sub>O<sub>2</sub>. Only the melanins synthesized in the presence of Fe<sup>2+</sup>/H<sub>2</sub>O<sub>2</sub> appeared to possess the capacity to reduce dichlorophenolindophenol.

scholarly journals The Bio-fabrication of Gold Nanoparticles (AuNPs) by Green Method and Study of its Electrochemical Applications

2020 ◽  
Vol 1 (4) ◽  
pp. 22-25
Author(s):  
Azwan Morni
Keyword(s):  
Gold Nanoparticles ◽  
Ir Spectroscopy ◽  
Face Centered Cubic ◽  
X Ray Diffraction ◽  
Green Method ◽  
Oh Groups ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

This study reports a green method for the synthesis of gold nanoparticles (AuNPs) using the aqueous extract of Salix aegyptiaca extract. The effects of gold salt concentration, extract concentration and extract quantity were investigated on nanoparticles synthesis. Novel methods of ideally synthesizing AuNPs are thus thought that are formed at ambient temperatures, neutral pH, low costs and environmentally friendly fashion. AuNPs were characterized with different techniques such as UV–vis spectroscopy, FT-IR spectroscopy, X-ray diffraction, and TEM. FT-IR spectroscopy revealed that gold nanoparticles were functionalized with biomolecules that have primary carbonyl group, -OH groups and other stabilizing functional groups. TEM experiments showed that these nanoparticles are formed with various shapes and X-ray diffraction pattern showed high purity and face centered cubic structure of AuNPs. For electrochemical properties of AuNPs, a modified glassy carbon electrode using AuNPs (AuNPs/GCE) was investigated. The results show that electronic transmission rate between the modified electrode and [Fe (CN)6]3-/4- increased.

scholarly journals Synthesis and Control of the Shell Thickness of Polyaniline and Polypyrrole Half Hollow Spheres Using the Polystyrene Cores

2012 ◽  
Vol 2012 ◽  
pp. 1-9 ◽  
Author(s):  
Su-Ryeon Yun ◽  
Gyeong-Ok Kim ◽  
Chan Woo Lee ◽  
Nam-Ju Jo ◽  
Yongku Kang ◽  
...  
Keyword(s):  
Shell Thickness ◽  
Hollow Spheres ◽  
Core Shell ◽  
Chemical Structures ◽  
The Core ◽  
Vis Spectroscopy ◽  
Ft Ir ◽  
Core Shell Structure ◽  
And Control ◽  
Ft Ir Spectroscopy

Polyaniline (Pani) and polypyrrole (Ppy) half hollow spheres with different shell thicknesses were successfully synthesized by three steps process using polystyrene (PS) as the core. The PS core was synthesized by emulsion polymerization. Aniline and pyrrole monomers were polymerized on the surface of the PS core. The shells of Pani and Ppy were fabricated by adding different amounts of aniline and pyrrole monomers. PS cores were dissolved and removed from the core shell structure by solvent extraction. The thicknesses of the Pani and Ppy half hollow spheres were observed by FE-SEM and FE-TEM. The chemical structures of the Pani and Ppy half hollow spheres were characterized by FT-IR spectroscopy and UV-Vis spectroscopy. The shell thicknesses of the Pani half hollow spheres were 30.2, 38.0, 42.2, 48.2, and 52.4 nm, while the shell thicknesses of the Ppy half hollow spheres were 16.0, 22.0, 27.0, and 34.0 nm. The shell thicknesses of Pani and Ppy half hollow spheres linearly increased as the amount of the monomer increased. Therefore, the shell thickness of the Pani and Ppy half hollow spheres can be controlled in these ranges.

scholarly journals Nanosized MoO3 as a reusable heterogeneous catalyst for the synthesis of 2,6-bis(benzylidene)cyclohexanones

2015 ◽  
Vol 33 (1) ◽  
pp. 163-168 ◽  
Author(s):  
Nitin R. Dighore ◽  
Priyanka L. Anandgaonker ◽  
Suresh T. Gaikwad ◽  
Anjali S. Rajbhoj
Keyword(s):  
Heterogeneous Catalyst ◽  
Product Yield ◽  
Synthesis Process ◽  
X Ray Diffraction ◽  
Structure Directing Agent ◽  
Vis Spectroscopy ◽  
Solvent Formation ◽  
Ft Ir ◽  
Work Up ◽  
Ft Ir Spectroscopy

AbstractCrystalline MoO3 nanoparticles were obtained by electrochemical synthesis process using tetrapropylammonium bromide as a stabilizer and structure-directing agent in ACN:THF(4:1) solvent. Formation of MoO3 nanoparticles took place at a constant supply current of 14 mA/cm2. These synthesized MoO3 nanoparticles were characterized by UV-Vis spectroscopy, FT-IR spectroscopy, powder X-ray diffraction (XRD), scanning electron microscopy (SEM). So prepared MoO3 nanoparticles were used as a heterogeneous catalyst for the synthesis of 2,6-bis(benzylidene)cyclohexanone derivatives. This protocol offers several advantages, such as simple work-up procedure, recyclability of the catalyst, excellent product yield in a short reaction time and purification of products with a non-chromatographic method.

Improving photoluminescence, optical and electrical characteristics of PMMA films with gamma irradiation

2021 ◽  
Author(s):  
M.F. Zaki ◽  
Nasser Shubayr ◽  
Reda M Radwan ◽  
Yazeed Alashban
Keyword(s):  
Gamma Irradiation ◽  
Polymeric Materials ◽  
Advanced Materials ◽  
Strong Impact ◽  
Electrical Characteristics ◽  
Electrical Measurements ◽  
Indirect Transition ◽  
Dielectric Parameters ◽  
Vis Spectroscopy ◽  
Gamma Irradiated

Abstract Polymeric materials are macromolecules, essentially a combination of numerous repeated subunits. Polymers are innovative and advanced materials that currently have a strong impact on our daily lives. In recent years, polymer use has been prominent due to the materials’ distinctive properties; thus, they entered different fields of science, technology and industrial-biomedical applications.The improvement of photoluminescence, optical and electrical characteristics of non-conducting Poly(methyl methacrylate) (PMMA) films was studied. Upon gamma irradiation of various doses, the photophysical and electrical properties of PMMA films were investigated using photoluminescence spectroscopy, ultraviolet–visible (UV-Vis) spectroscopy and the LCR Meter Bridge Circuit technique. The fluorescent response improved the photoluminescence (PL) spectral emission peaks according to gamma values. Strong fluorescence peaks appeared with the highest gamma dose. The UV–Vis results revealed a significant red-shift in the absorption edge as gamma doses increased. This shift exhibits a continuous decrease in the energy band gap values (from 3.50 to 2.60 eV for direct transition and from 3.05 to 1.55 eV for indirect transition). This was due to the formation of carbon clusters, which led to an increase in the electrical conductivity and improved the dielectric parameters of the irradiated PMMA films. Among a variety of measurements presented and discussed in the present study, the electrical measurements showed improved electrical characteristics of gamma-irradiated PMMA films.

Characteristics of Konjac Glucomannan (KGM) in A.bulbifer Compared with that in A.rivieri and A.albus

2011 ◽  
Vol 236-238 ◽  
pp. 2045-2052 ◽  
Author(s):  
Qiao Wang ◽  
Jian Wang ◽  
Geng Zhong
Keyword(s):  
Chemical Structure ◽  
Average Molecular Weight ◽  
Konjac Glucomannan ◽  
Water Soluble ◽  
Soluble Dietary Fiber ◽  
Physiochemical Properties ◽  
Ft Ir ◽  
Main Component ◽  
Ft Ir Spectroscopy ◽  
Southwest Part

Amorphophallus bulbifer (A. bulbifer) is a promising species in Amorphophallus sp., with great potentiality of developing, low risk for cultivation and considerable commercial benefits, mainly locates in tropical and subtropical regions or near the equator. Konjac glucomannan (KGM) is the main component of Amorphophallus tuber which is a water-soluble dietary fiber. In this work, some physiochemical properties of KGM in three Amorphophallus species flour [one was A.bulbifer, the other two were current main species namely Amorphophallus rivieri (A. rivieri) and Amorphophallus albus (A. albus)] were studied and compared with each other. The KGM content in A. rivieri, A. albus and A. bulbifer flour were 85.03%, 76.28% and 88.07% (w/w), respectively. The apparent viscosity, viscosity average molecular weight, whiteness, gel-forming properties and chemical structure of KGM in the three flours were investigated by using viscometer, colorimeter, texture analyzer and Fourier transform infrared (FT-IR) spectroscopy. The results indicated that the viscosity and Mw of A. bulbifer was the largest, gel strength was almost same (p>0.05) and the molecular structure were of no differences of three KGM. It may be proposed that transplanting A. bulbifer from its native land in the tropical and subtropical regions to temperate zone in the southwest part of China would be feasible, and it would cause the revolution of Amorphophallus sp. and more considerable benefits.

Study on Host-Guest Inclusion Complexation of a Drug in Cucurbit [6]uril

2018 ◽  
Vol 232 (2) ◽  
pp. 281-293 ◽  
Author(s):  
Kanak Roy ◽  
Subhadeep Saha ◽  
Biswajit Datta ◽  
Lovely Sarkar ◽  
Mahendra Nath Roy
Keyword(s):  
Surface Tension ◽  
Specific Conductivity ◽  
Inclusion Complexation ◽  
Conductivity Measurements ◽  
Saline Environment ◽  
H Nmr ◽  
Vis Spectroscopy ◽  
Ft Ir ◽  
The Stability ◽  
Ft Ir Spectroscopy

AbstractAssembly of pyridine-2-aldoxime drug with cucurbit [6]uril (CB[6]) has been investigated by1H-NMR and 2D-ROESY NMR, UV-Vis spectroscopy, FT-IR spectroscopy, surface tension and conductivity measurements in aqueous saline environment. The distinct cationic receptor feature and the cavity dimension of the CB[6] emphasize that the macro-cyclic host molecule remain as complex with the nerve stimulus drug molecule. The results obtained from surface tension and specific conductivity measurements suggest 1:1 inclusion complex formation between drug and CB[6]. The stability constant evaluated by UV-Vis spectroscopic approach is 2.21×105M−1at 298.15 K, which indicates that the complex is sufficiently stable at physiological temperature.

Synthesis, in vitro inhibition effect of novel phthalocyanine complexes as carbonic anhydrase and paraoxonase enzyme inhibitors

2020 ◽  
Vol 24 (08) ◽  
pp. 1047-1053
Author(s):  
Emre Güzel ◽  
Barış Seçkin Arslan ◽  
Kübra Çıkrıkçı ◽  
Adem Ergün ◽  
Nahit Gençer ◽  
...  
Keyword(s):  
Carbonic Anhydrase ◽  
Enzyme Inhibitors ◽  
Inhibition Effect ◽  
H Nmr ◽  
Vis Spectroscopy ◽  
Ft Ir ◽  
First Time ◽  
Ft Ir Spectroscopy ◽  
C Nmr

The preparation and assessment of carbonic anhydrase and paraoxonase enzyme inhibition properties of 3-(2-(5-amino-4-(4-bromophenyl)-3-methyl-1H-pyrazol-1-yl)ethoxy)phthalonitrile (2) and its nitrogen-containing non-peripheral phthalocyanine derivatives (3 and 4) are reported for the first time. The new phthalonitrile and its phthalocyanine derivatives have been elucidated by FT-IR spectroscopy, 1H-NMR, [Formula: see text]C-NMR, mass and UV-vis spectroscopy. The results demonstrated that all synthesized compounds moderately inhibited carbonic anhydrase and paraoxonase enzymes. Among the compounds, the most active ones were found to be compound 4 for PON (Ki : 0.14 [Formula: see text]M), compound 3 for hCA I (Ki : 22.52 [Formula: see text]M) and compound 1 for hCA II (Ki : 13.62 [Formula: see text]M).

scholarly journals Preparation and characterization of highly blue emitting fluorescent carbon nano-dots using Pongammia pinnata fresh leaves

2021 ◽  
Author(s):  
Govindaraju K ◽  
K. Vijai Anand ◽  
S. Muthamilselvan ◽  
M. Kannan ◽  
M. Elanchezhiyan
Keyword(s):  
Electron Microscopy ◽  
Water Soluble ◽  
Hydrothermal Technique ◽  
Transmission Electron ◽  
Vis Spectroscopy ◽  
Ft Ir ◽  
Average Size ◽  
Soluble Carbon ◽  
Ft Ir Spectroscopy

Abstract In this study, a simple environmental benign approach have been adopted for the preparation of highly luminescent (blue emitting) water soluble carbon nano-dots using Pongammia pinnata (Pp) leaves via hydrothermal technique. The prepared Pp-carbon nano- dots were characterized using UV-vis spectroscopy, fluorescence spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, transmission electron microscopy (TEM) and dynamic light scattering (DLS) measurements. The Pp-carbon nano-dots are spherical in shape with an average size of 32 nm.

Sign in / Sign up

Export Citation Format

Share Document