A novel approach on micropolar fluid flow in a porous channel with high mass transfer via wavelet frames

2021 ◽  
Vol 10 (1) ◽  
pp. 39-45
Author(s):  
S. Kumbinarasaiah ◽  
K.R. Raghunatha
Keyword(s):  
Mass Transfer ◽  
Differential Equations ◽  
Micropolar Fluid ◽  
High Mass ◽  
Porous Channel ◽  
Physical Parameters ◽  
Wavelet Frames ◽  
Parseval Frame ◽  
Highly Nonlinear ◽  
Frame Method

Abstract In this article, we present the Laguerre wavelet exact Parseval frame method (LWPM) for the two-dimensional flow of a rotating micropolar fluid in a porous channel with huge mass transfer. This flow is governed by highly nonlinear coupled partial differential equations (PDEs) are reduced to the nonlinear coupled ordinary differential equations (ODEs) using Berman's similarity transformation before being solved numerically by a Laguerre wavelet exact Parseval frame method. We also compared this work with the other methods in the literature available. Moreover, in the graphs of the velocity distribution and microrotation, we shown that the proposed scheme's solutions are more accurate and applicable than other existing methods in the literature. Numerical results explaining the effects of various physical parameters connected with the flow are discussed.

scholarly journals Influence of Hall Current and Thermal Radiation on MHD Convective Heat and Mass Transfer in a Rotating Porous Channel with Chemical Reaction

2013 ◽  
Vol 2013 ◽  
pp. 1-13 ◽  
Author(s):  
Dulal Pal ◽  
Babulal Talukdar
Keyword(s):  
Magnetic Field ◽  
Mass Transfer ◽  
Thermal Radiation ◽  
Heat And Mass Transfer ◽  
Hall Current ◽  
Perturbation Technique ◽  
Porous Channel ◽  
Physical Parameters ◽  
Shear Stresses ◽  
Resultant Velocity

A theoretical study is carried out to obtain an analytic solution of heat and mass transfer in a vertical porous channel with rotation and Hall current. A constant suction and injection is applied to the two insulating porous plates. A strong magnetic field is applied in the transverse direction. The entire system rotates with uniform angular velocity Ω about the axis normal to the plates. The governing equations are solved by perturbation technique to obtain the analytical results for velocity, temperature, and concentration fields and shear stresses. The steady and unsteady resultant velocities along with the phase differences for various values of physical parameters are discussed in detail. The effects of rotation, buoyancy force, magnetic field, thermal radiation, and heat generation parameters on resultant velocity, temperature, and concentration fields are analyzed.

scholarly journals Heat and Mass Transfer of a Micropolar Fluid in a Porous Channel

2014 ◽  
Vol 2014 ◽  
pp. 1-20 ◽  
Author(s):  
M. Sheikholeslami ◽  
H. R. Ashorynejad ◽  
D. Ganji ◽  
M. Rashidi
Keyword(s):  
Mass Transfer ◽  
Heat And Mass Transfer ◽  
Micropolar Fluid ◽  
Porous Channel

scholarly journals On Mixed Convection Squeezing Flow of Nanofluids

Energies ◽  
2020 ◽  
Vol 13 (12) ◽  
pp. 3138 ◽  
Author(s):  
Sheikh Irfan Ullah Khan ◽  
Ebraheem Alzahrani ◽  
Umar Khan ◽  
Noreena Zeb ◽  
Anwar Zeb
Keyword(s):  
Nonlinear System ◽  
Differential Equations ◽  
Mixed Convection ◽  
Ordinary Differential Equations ◽  
Volume Fraction ◽  
Squeezing Flow ◽  
Physical Parameters ◽  
Gamma Alumina ◽  
Highly Nonlinear ◽  
The Impact

In this article, the impact of effective Prandtl number model on 3D incompressible flow in a rotating channel is proposed under the influence of mixed convection. The coupled nonlinear system of partial differential equations is decomposed into a highly nonlinear system of ordinary differential equations with aid of suitable similarity transforms. Then, the solution of a nonlinear system of ordinary differential equations is obtained numerically by using Runge–Kutta–Fehlberg (RKF) method. Furthermore, the surface drag force C f and the rate of heat transfer N u are portrayed numerically. The effects of different emerging physical parameters such as Hartmann number (M), Reynold’s number (Re), squeezing parameter ( β ), mixed convection parameter λ , and volume fraction ( φ ) are also incorporated graphically for γ — alumina. Due to the higher viscosity and thermal conductivity ethylene-based nanofluids, it is observed to be an effective common base fluid as compared to water. These observations portrayed the temperature of gamma-alumina ethylene-based nanofluids rising on gamma-alumina water based nanofluids.

scholarly journals Thermal radiation and magnetic field effects on unsteady mixed convection flow and mass transfer over a porous stretching surface with heat generation

2013 ◽  
Vol 18 (4) ◽  
pp. 1151-1164 ◽  
Author(s):  
G.V.R. Reddy ◽  
B.A. Reddy ◽  
N.B. Reddy
Keyword(s):  
Mass Transfer ◽  
Differential Equations ◽  
Mixed Convection ◽  
Thermal Radiation ◽  
Heat Generation ◽  
Convection Flow ◽  
Physical Parameters ◽  
Mixed Convection Flow ◽  
Stretching Surface ◽  
Porous Stretching Surface

Abstract The effects of thermal radiation and mass transfer on an unsteady hydromagnetic boundary layer mixed convection flow along a vertical porous stretching surface with heat generation are studied. The fluid is assumed to be viscous and incompressible. The governing partial differential equations are transformed into a system of ordinary differential equations using similarity variables. Numerical solutions of these equations are obtained by using the Runge-Kutta fourth order method along with the shooting technique. Velocity, temperature, concentration, the skin-friction coefficient, Nusselt number and Sherwood number for variations in the governing thermo physical parameters are computed, analyzed and discussed.

Soret and dufour effects on MHD mixed convection heat and mass transfer in a micropolar fluid

2013 ◽  
Vol 3 (4) ◽  
Author(s):  
Darbhasayanam Srinivasacharya ◽  
Mendu Upendar
Keyword(s):  
Mass Transfer ◽  
Differential Equations ◽  
Mixed Convection ◽  
Heat And Mass Transfer ◽  
Micropolar Fluid ◽  
Nonlinear Partial Differential Equations ◽  
Skin Friction Coefficient ◽  
Soret And Dufour Effects ◽  
Similarity Transformations ◽  
Special Cases

AbstractThis paper analyzes the flow, heat and mass transfer characteristics of the mixed convection on a vertical plate in a micropolar fluid in the presence of Soret and Dufour effects. A uniform magnetic field of magnitude is applied normal to the plate. The governing nonlinear partial differential equations are transformed into a system of coupled nonlinear ordinary differential equations using similarity transformations and then solved numerically using the Keller-box method. The numerical results are compared and found to be in good agreement with previously published results as special cases of the present investigation. The rate of heat and mass transfer at the plate are presented graphically for various values of coupling number, magnetic parameter, Prandtl number, Schmidt number, Dufour and Soret numbers. In addition, the skin-friction coefficient, the wall couple stress are shown in a tabular form.

scholarly journals Dual Stratified Nanofluid Flow Past a Permeable Shrinking/Stretching Sheet Using a Non-Fourier Energy Model

2019 ◽  
Vol 9 (10) ◽  
pp. 2124 ◽  
Author(s):  
Najiyah Safwa Khashi’ie ◽  
Norihan Md Arifin ◽  
Ezad Hafidz Hafidzuddin ◽  
Nadihah Wahi
Keyword(s):  
Mass Transfer ◽  
Differential Equations ◽  
Transfer Rate ◽  
Energy Equation ◽  
Numerical Solutions ◽  
Thermal Relaxation ◽  
Physical Parameters ◽  
Nanofluid Flow ◽  
Local Skin ◽  
Flow Past

The present study emphasizes the combined effects of double stratification and buoyancy forces on nanofluid flow past a shrinking/stretching surface. A permeable sheet is used to give way for possible wall fluid suction while the magnetic field is imposed normal to the sheet. The governing boundary layer with non-Fourier energy equations (partial differential equations (PDEs)) are converted into a set of nonlinear ordinary differential equations (ODEs) using similarity transformations. The approximate relative error between present results (using the boundary value problem with fourth order accuracy (bvp4c) function) and previous studies in few limiting cases is sufficiently small (0% to 0.3694%). Numerical solutions are graphically displayed for several physical parameters namely suction, magnetic, thermal relaxation, thermal and solutal stratifications on the velocity, temperature and nanoparticles volume fraction profiles. The non-Fourier energy equation gives a different estimation of heat and mass transfer rates as compared to the classical energy equation. The heat transfer rate approximately elevates 5.83% to 12.13% when the thermal relaxation parameter is added for both shrinking and stretching cases. Adversely, the mass transfer rate declines within the range of 1.02% to 2.42%. It is also evident in the present work that the augmentation of suitable wall mass suction will generate dual solutions. The existence of two solutions (first and second) are noticed in all the profiles as well as the local skin friction, Nusselt number and Sherwood number graphs within the considerable range of parameters. The implementation of stability analysis asserts that the first solution is the real solution.

scholarly journals Dual solutions for heat and mass transfer in chemically reacting radiative non-Newtonian fluid with aligned magnetic field

2017 ◽  
Vol 14 (1) ◽  
pp. 25-38 ◽  
Author(s):  
J. V. Ramana Reddy ◽  
V. Sugunamma ◽  
N. Sandeep
Keyword(s):  
Magnetic Field ◽  
Mass Transfer ◽  
Differential Equations ◽  
Heat And Mass Transfer ◽  
Stretching Sheet ◽  
Graphical Representation ◽  
Physical Parameters ◽  
Transfer Coefficients ◽  
Chemically Reacting ◽  
Aligned Magnetic Field

Through this paper we investigated the heat and mass transfer in chemically reacting radiative Casson fluid flow over a slandering/flat stretching sheet in a slip flow regime with aligned magnetic field. This study is carried out under the influence of non uniform heat source/sink. First we converted the governing equations of the flow into ordinary differential equations by making use of suitable similarity transformations. The obtained non-linear differential equations are solved numerically using Runge-Kutta based shooting technique. Further, graphical representation has been given to study the effects of various physical parameters on velocity, temperature and concentration fields. Also numerical computations has been carried out to investigate the influence of the physical parameters involved in the flow on skin friction, rate of heat and mass transfer coefficients. Through this investigation, it is observed that aligned angle, Casson parameter and velocity slip parameter have the tendency to control the velocity field. Also heat transfer rate in flat stretching sheet is higher than that of slendering stretching sheet. A good agreement of the present results with the existed literature has been observed. 

scholarly journals The Inclined Factors of Magnetic Field and Shrinking Sheet in Casson Fluid Flow, Heat and Mass Transfer

Symmetry ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 373
Author(s):  
Shahanaz Parvin ◽  
Siti Suzilliana Putri Mohamed Isa ◽  
Norihan Md Arifin ◽  
Fadzilah Md Ali
Keyword(s):  
Magnetic Field ◽  
Mass Transfer ◽  
Fluid Flow ◽  
Differential Equations ◽  
Heat And Mass Transfer ◽  
Fluid Model ◽  
Casson Fluid ◽  
Shrinking Sheet ◽  
Physical Parameters ◽  
Flow Heat

The development of the mathematical modeling of Casson fluid flow and heat and mass transfer is presented in this paper. The model is subjected to the following physical parameters: shrinking parameter, mixed convection, concentration buoyancy ratio parameter, Soret number, and Dufour number. This model is also subjected to the inclined magnetic field and shrinking sheet at a certain angle projected from the y- and x-axes, respectively. The MATLAB bvp4c program is the main mathematical program that was used to obtain the final numerical solutions for the reduced ordinary differential equations (ODEs). These ODEs originate from the governing partial differential equations (PDEs), where the transformation can be achieved by applying similarity transformations. The MATLAB bvp4c program was also implemented to develop stability analysis, where this calculation was executed to recognize the most stable numerical solution. Numerical graphics were made for the skin friction coefficient, local Nusselt number, local Sherwood number, velocity profile, temperature profile, and concentration profile for certain values of the physical parameters. It is found that all the governed parameters affected the variations of the Casson fluid flow, heat transfer, mass transfer, and the profiles of velocity, temperature, and concentration. In addition, a stable solution can be applied to predict the impact of physical parameters on the actual fluid model by using a mathematical fluid model.

scholarly journals Hydromagnetic Dissipative and Radiative Graphene Maxwell Nanofluid Flow Past a Stretched Sheet-Numerical and Statistical Analysis

Mathematics ◽  
2020 ◽  
Vol 8 (11) ◽  
pp. 1929 ◽  
Author(s):  
Syed M. Hussain ◽  
Rohit Sharma ◽  
Manas R. Mishra ◽  
Sattam S. Alrashidy
Keyword(s):  
Magnetic Field ◽  
Differential Equations ◽  
Nonlinear Partial Differential Equations ◽  
Physical Parameters ◽  
Maxwell Nanofluid ◽  
Nusselt Numbers ◽  
Highly Nonlinear ◽  
Numeric Data ◽  
The Relationship ◽  
The Magnetic Field

The key objective of this analysis is to examine the flow of hydromagnetic dissipative and radiative graphene Maxwell nanofluid over a linearly stretched sheet considering momentum and thermal slip conditions. The appropriate similarity variables are chosen to transform highly nonlinear partial differential equations (PDE) of mathematical model in the form of nonlinear ordinary differential equations (ODE). Further, these transformed equations are numerically solved by making use of Runge-Kutta-Fehlberg algorithm along with the shooting scheme. The significance of pertinent physical parameters on the flow of graphene Maxwell nanofluid velocity and temperature are enumerated via different graphs whereas skin friction coefficients and Nusselt numbers are illustrated in numeric data form and are reported in different tables. In addition, a statistical approach is used for multiple quadratic regression analysis on the numerical figures of wall velocity gradient and local Nusselt number to demonstrate the relationship amongst heat transfer rate and physical parameters. Our results reveal that the magnetic field, unsteadiness, inclination angle of magnetic field and porosity parameters boost the graphene Maxwell nanofluid velocity while Maxwell parameter has a reversal impact on it. Finally, we have compared our numerical results with those of earlier published articles under the restricted conditions to validate our solution. The comparison of results shows an excellent conformity among the results.

Sign in / Sign up

Export Citation Format

Share Document