scholarly journals On Mixed Convection Squeezing Flow of Nanofluids

Energies ◽  
2020 ◽  
Vol 13 (12) ◽  
pp. 3138 ◽  
Author(s):  
Sheikh Irfan Ullah Khan ◽  
Ebraheem Alzahrani ◽  
Umar Khan ◽  
Noreena Zeb ◽  
Anwar Zeb
Keyword(s):  
Nonlinear System ◽  
Differential Equations ◽  
Mixed Convection ◽  
Ordinary Differential Equations ◽  
Volume Fraction ◽  
Squeezing Flow ◽  
Physical Parameters ◽  
Gamma Alumina ◽  
Highly Nonlinear ◽  
The Impact

In this article, the impact of effective Prandtl number model on 3D incompressible flow in a rotating channel is proposed under the influence of mixed convection. The coupled nonlinear system of partial differential equations is decomposed into a highly nonlinear system of ordinary differential equations with aid of suitable similarity transforms. Then, the solution of a nonlinear system of ordinary differential equations is obtained numerically by using Runge–Kutta–Fehlberg (RKF) method. Furthermore, the surface drag force C f and the rate of heat transfer N u are portrayed numerically. The effects of different emerging physical parameters such as Hartmann number (M), Reynold’s number (Re), squeezing parameter ( β ), mixed convection parameter λ , and volume fraction ( φ ) are also incorporated graphically for γ — alumina. Due to the higher viscosity and thermal conductivity ethylene-based nanofluids, it is observed to be an effective common base fluid as compared to water. These observations portrayed the temperature of gamma-alumina ethylene-based nanofluids rising on gamma-alumina water based nanofluids.

scholarly journals Analytical Modelling of Three-Dimensional Squeezing Nanofluid Flow in a Rotating Channel on a Lower Stretching Porous Wall

2014 ◽  
Vol 2014 ◽  
pp. 1-14 ◽  
Author(s):  
Navid Freidoonimehr ◽  
Behnam Rostami ◽  
Mohammad Mehdi Rashidi ◽  
Ebrahim Momoniat
Keyword(s):  
Differential Equations ◽  
Ordinary Differential Equations ◽  
Volume Fraction ◽  
Three Dimensional ◽  
Porous Wall ◽  
Coupled System ◽  
Physical Parameters ◽  
Nonlinear Ordinary Differential Equations ◽  
Suction Parameter ◽  
Rotating Channel

A coupled system of nonlinear ordinary differential equations that models the three-dimensional flow of a nanofluid in a rotating channel on a lower permeable stretching porous wall is derived. The mathematical equations are derived from the Navier-Stokes equations where the governing equations are normalized by suitable similarity transformations. The fluid in the rotating channel is water that contains different nanoparticles: silver, copper, copper oxide, titanium oxide, and aluminum oxide. The differential transform method (DTM) is employed to solve the coupled system of nonlinear ordinary differential equations. The effects of the following physical parameters on the flow are investigated: characteristic parameter of the flow, rotation parameter, the magnetic parameter, nanoparticle volume fraction, the suction parameter, and different types of nanoparticles. Results are illustrated graphically and discussed in detail.

scholarly journals Darcy-Forchheimer hybrid nanofluid flow over a stretching curved surface with heat and mass transfer

PLoS ONE ◽  
2021 ◽  
Vol 16 (5) ◽  
pp. e0249434
Author(s):  
Anwar Saeed ◽  
Wajdi Alghamdi ◽  
Safyan Mukhtar ◽  
Syed Imad Ali Shah ◽  
Poom Kumam ◽  
...  
Keyword(s):  
Differential Equations ◽  
Ordinary Differential Equations ◽  
Volume Fraction ◽  
Curved Surface ◽  
Hybrid Nanofluid ◽  
Porous Space ◽  
Highly Nonlinear ◽  
Homotopy Analysis ◽  
Curvature Parameter ◽  
Swcnts And Mwcnts

The present article provides a detailed analysis of the Darcy Forchheimer flow of hybrid nanoliquid past an exponentially extending curved surface. In the porous space, the viscous fluid is expressed by Darcy-Forchheimer. The cylindrical shaped carbon nanotubes (SWCNTs and MWCNTs) and Fe3O4 (iron oxide) are used to synthesize hybrid nanofluid. At first, the appropriate similarity transformation is used to convert the modeled nonlinear coupled partial differential equations into nonlinear coupled ordinary differential equations. Then the resulting highly nonlinear coupled ordinary differential equations are analytically solved by the utilization of the “Homotopy analysis method” (HAM) method. The influence of sundry flow factors on velocity, temperature, and concentration profile are sketched and briefly discussed. The enhancement in both volume fraction parameter and curvature parameter k results in raises of the velocity profile. The uses of both Fe3O4 and CNTs nanoparticles are expressively improving the thermophysical properties of the base fluid. Apart from this, the numerical values of some physical quantities such as skin friction coefficients, local Nusselt number, and Sherwood number for the variation of the values of pertinent parameters are displayed in tabular forms. The obtained results show that the hybrid nanofluid enhances the heat transfer rate 2.21%, 2.1%, and 2.3% using the MWCNTs, SWCNTs, and Fe3O4 nanomaterials.

Mixed Convection Boundary Layer Flow of Williamson Fluid with Slip Conditions Over a Stretching Cylinder by Using Keller Box Method

2017 ◽  
Vol 18 (1) ◽  
pp. 9-17 ◽  
Author(s):  
T. Salahuddin ◽  
M. Y. Malik ◽  
Arif Hussain ◽  
M. Awais ◽  
S. Bilal
Keyword(s):  
Boundary Layer ◽  
Differential Equations ◽  
Mixed Convection ◽  
Ordinary Differential Equations ◽  
Convection Flow ◽  
Physical Parameters ◽  
Stretching Cylinder ◽  
Williamson Fluid ◽  
Keller Box Method ◽  
Box Method

AbstractThe aim of the present analysis is to examine the effects of slip boundary conditions and mixed convection flow of Williamson fluid over a stretching cylinder. The boundary layer partial differential equations are transformed into ordinary differential equations by using group theory transformations. The required ordinary differential equations are solved numerically by using implicit finite difference method known as Keller box method. The influence of dimensionless physical parameters on velocity and temperature profile as well as skin friction coefficient and local Nusselt number are presented graphically. Comparison has been made to the previous literature in order to check the accuracy of the method.

scholarly journals Soret- Dufour Effect on Mixed Convection Past a Vertical Plate in Non-Darcy Porous Medium Saturated With Buongiorno Nanofluid in the Presence of Thermal Dispersion

2019 ◽  
Vol 35 (6) ◽  
pp. 851-862
Author(s):  
A. Aghbari ◽  
H. Ali Agha ◽  
D. Sadaoui
Keyword(s):  
Porous Medium ◽  
Differential Equations ◽  
Mixed Convection ◽  
Vertical Plate ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Convection Boundary Layer ◽  
Physical Parameters ◽  
Thermal Dispersion ◽  
Convective Boundary

ABSTRACTNumerical analysis was investigated for steady two-dimensional double diffusive mixed convection boundary layer flow over a semi-infinite vertical plate embedded non-Darcy porous medium filled with nanofluid, in presence of thermal dispersion and under convective boundary conditions. The Buongiorno nanofluid model is used, while the porous medium is described by the Darcy-Forchheimer extension. The governing partial differential equations are transformed into four coupled nonlinear ordinary differential equations using an appropriate similarity transformations and the resulting system of equations is then solved numerically by the finite-difference method. Numerical results are presented to illustrate how the physical parameters affect the flow field, temperature, concentration and solid volume fraction profiles. In addition, the variation of heat, mass and nanoparticle transfer rates at the plate are exhibited graphically for different values of pertinent parameters.

scholarly journals Applied Mathematical Modelling and Heat Transport Investigation in Hybrid Nanofluids under the Impact of Thermal Radiation: Numerical Analysis

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Umar Khan ◽  
Basharat Ullah ◽  
Wahid Khan ◽  
Adnan ◽  
Ilyas Khan ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Differential Equations ◽  
Mixed Convection ◽  
Dynamic Viscosity ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Temperature Fields ◽  
Convection Boundary Layer ◽  
Heat Transmission ◽  
The Impact

Nanofluids are solid-liquid mixtures that have a dispersion of nanometer-sized particles in conventional base fluids. The flow and heat transmission in an unstable mixed convection boundary layer are affected by the thermal conductivity and dynamic viscosity uncertainty of a nanofluid over a stretching vertical surface. There is time-dependent stretching velocity and surface temperature instability in both the flow and temperature fields. It is possible to scale the governing partial differential equations and then solve them using ordinary differential equations. Cu and Al2O3 nanofluids based on water are among the possibilities being investigated. An extensive discussion has been done on relevant parameters such as the unsteadiness parameter and the mixed convection parameter's effect on solid volume fraction of nanoparticles. In addition, alternative nanofluid models based on distinct thermal conductivity and dynamic viscosity formulas are examined for their flow and heat transmission properties. On the basis of the comparison, it is concluded that the results are spot on for steady state flow.

scholarly journals Parametric analysis of the heat transfer behavior of the nano-particle ionic-liquid flow between concentric cylinders

2021 ◽  
Vol 13 (6) ◽  
pp. 168781402110240
Author(s):  
Rehan Ali Shah ◽  
Hidayat Ullah ◽  
Muhammad Sohail Khan ◽  
Aamir Khan
Keyword(s):  
Heat Transfer ◽  
Ionic Liquid ◽  
Partial Differential Equations ◽  
Differential Equations ◽  
Heat Source ◽  
Ordinary Differential Equations ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Volume Fraction ◽  
Concentric Cylinders

This paper investigates the enhanced viscous behavior and heat transfer phenomenon of an unsteady two di-mensional, incompressible ionic-nano-liquid squeezing flow between two infinite parallel concentric cylinders. To analyze heat transfer ability, three different type nanoparticles such as Copper, Aluminum [Formula: see text], and Titanium oxide [Formula: see text] of volume fraction ranging from 0.1 to 0.7 nm, are added to the ionic liquid in turns. The Brinkman model of viscosity and Maxwell-Garnets model of thermal conductivity for nano particles are adopted. Further, Heat source [Formula: see text], is applied between the concentric cylinders. The physical phenomenon is transformed into a system of partial differential equations by modified Navier-Stokes equation, Poisson equation, Nernst-Plank equation, and energy equation. The system of nonlinear partial differential equations, is converted to a system of coupled ordinary differential equations by opting suitable transformations. Solution of the system of coupled ordinary differential equations is carried out by parametric continuation (PC) and BVP4c matlab based numerical methods. Effects of squeeze number ( S), volume fraction [Formula: see text], Prandtle number (Pr), Schmidt number [Formula: see text], and heat source [Formula: see text] on nano-ionicliquid flow, ions concentration distribution, heat transfer rate and other physical quantities of interest are tabulated, graphed, and discussed. It is found that [Formula: see text] and Cu as nanosolid, show almost the same enhancement in heat transfer rate for Pr = 0.2, 0.4, 0.6.

A novel approach on micropolar fluid flow in a porous channel with high mass transfer via wavelet frames

2021 ◽  
Vol 10 (1) ◽  
pp. 39-45
Author(s):  
S. Kumbinarasaiah ◽  
K.R. Raghunatha
Keyword(s):  
Mass Transfer ◽  
Differential Equations ◽  
Micropolar Fluid ◽  
High Mass ◽  
Porous Channel ◽  
Physical Parameters ◽  
Wavelet Frames ◽  
Parseval Frame ◽  
Highly Nonlinear ◽  
Frame Method

Abstract In this article, we present the Laguerre wavelet exact Parseval frame method (LWPM) for the two-dimensional flow of a rotating micropolar fluid in a porous channel with huge mass transfer. This flow is governed by highly nonlinear coupled partial differential equations (PDEs) are reduced to the nonlinear coupled ordinary differential equations (ODEs) using Berman's similarity transformation before being solved numerically by a Laguerre wavelet exact Parseval frame method. We also compared this work with the other methods in the literature available. Moreover, in the graphs of the velocity distribution and microrotation, we shown that the proposed scheme's solutions are more accurate and applicable than other existing methods in the literature. Numerical results explaining the effects of various physical parameters connected with the flow are discussed.

Numerical exploration of mixed convection heat transfer features within a copper-water nanofluidic medium occupied a square geometrical cavity

2021 ◽  
Vol 8 (4) ◽  
pp. 807-820
Author(s):  
M. Zaydan ◽  
◽  
A. Wakif ◽  
E. Essaghir ◽  
R. Sehaqui ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Mixed Convection ◽  
Nonlinear Differential Equations ◽  
Convection Heat Transfer ◽  
Local Heat Transfer ◽  
Physical Parameters ◽  
Convection Heat ◽  
Linear Temperature ◽  
Mixed Convection Heat Transfer

The phenomenon of mixed convection heat transfer in a homogeneous mixture is deliberated thoroughly in this study for cooper-water nanofluids flowing inside a lid-driven square cavity. By adopting the Oberbeck-Boussinesq approximation and using the single-phase nanofluid model, the governing partial differential equations modeling the present flow are stated mathematically based on the Navier--Stokes and thermal balance formulations, where the important features of the scrutinized medium are presumed to remain constant at the cold temperature. Note here that the density quantity in the buoyancy body force is a linear temperature-dependent function. The characteristic quantities are computed realistically via the commonly used phenomenological laws and the more accurate experimental correlations. A feasible non-dimensionalization procedure has been employed to derive the dimensionless conservation equations. The resulting nonlinear differential equations are solved numerically for realistic boundary conditions by employing the fourth-order compact finite-difference method (FOCFDM). After performing extensive validations with the previously published findings, the dynamical and thermal features of the studied convective nanofluid flow are revealed to be in good agreement for sundry values of the involved physical parameters. Besides, the present numerical outcomes are discussed graphically and tabularly with the help of streamlines, isotherms, velocity fields, temperature distributions, and local heat transfer rate profiles.

Thermo-Solutal Convection of a Nanofluid Utilizing Fourier’s-Type Compass Conditions

2020 ◽  
Vol 9 (4) ◽  
pp. 362-374
Author(s):  
J. C. Umavathi ◽  
Ali J. Chamkha
Keyword(s):  
Brownian Motion ◽  
Prandtl Number ◽  
Boundary Conditions ◽  
Volume Fraction ◽  
Temperature Fields ◽  
Physical Parameters ◽  
Surface Boundary ◽  
Perturbation Scheme ◽  
Runge Kutta ◽  
The Impact

Nanotechnology has infiltrated into duct design in parallel with many other fields of mechanical, medical and energy engineering. Motivated by the excellent potential of nanofluids, a subset of materials engineered at the nanoscale, in the present work, a new mathematical model is developed for natural convection in a vertical duct containing nanofluid. Numerical scrutiny for the double-diffusive free and forced convection within a duct encumbered with nanofluid is performed. Buongiorno’s model is deployed to define the nanofluid. Robin boundary conditions are used to define the surface boundary conditions. Thermal and concentration equations envisage the viscous, Brownian motion, thermosphores of the nanofluid, Soret and Dufour effects. Using the Boussi-nesq approximation the solutal buoyancy effect as a result of gradients in concentration are incorporated. The conservation equations which are nonlinear are numerically estimated using fourth order Runge-Kutta methodology and analytically ratifying regular perturbation scheme. The mass, heat, nanoparticle concentration and species concentration fields on eight dimensionless physical parameters such as thermal and mass Grashof numbers, Brownian motion parameter, thermal parameter, Prandtl number, Eckert number, Schmidt parameter, and Soret parameter are calculated. The impact of these parameters are outlined pictorially. The velocity and temperature fields are boosted with the thermal Grashof number. The Soret and the Schemidt parameters reduces the nanoparticle volume fraction but it heightens the momentum, temperature and concentration. At the cold wall thermal and concentration Grashof numbers reduces the Nusselt values but they increase the Nusselt values at the hot wall. The reversal consequence was attained at the hot plate. The perturbation and Runge-Kutta solutions are equal in the nonappearance of Prandtl number. The (E. Zanchini, Int. J. Heat Mass Transfer 41, 3949 (1998)). results are restored for the regular fluid. The heat transfer rate is high for nanofluid when matched with regular fluid.

Sign in / Sign up

Export Citation Format

Share Document