Colorants in coatings

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Frank J. Maile
Keyword(s):  
Raw Materials ◽  
Service Unit ◽  
Research Activities ◽  
Specialist Knowledge ◽  
The Subject ◽  
Industrial Use ◽  
Practical Trial ◽  
Error Optimization ◽  
Insight Into ◽  
Coating Formulations

Abstract The aim of this chapter is to provide a compact overview of colorants and their use in coatings including a brief introduction to paint technology and its raw materials. In addition, it will focus on individual colorants by collecting information from the available literature mainly for their use in coatings. Publications on colorants in coatings applications are in many cases standard works that cover the wider aspects of color chemistry and paint technology and are explicitly recommended for a more detailed study of the subject [1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18]. Articles or information on paint formulation using coatings which contain colorants are rare [19]. This formulation expertise is often company property as it is the result of many years of effort built up over very long series of practical “trial-and-error” optimization tests and, more recently, supported by design of experiment and laboratory process automation [20, 21]. Therefore, it is protected by rigorous secrecy agreements. Formulations are in many ways part of a paint manufacturer’s capital, because of their use in automotive coatings, coil coatings, powder coatings, and specialist knowledge is indispensable to ensure their successful industrial use [22]. An important source to learn about the use of pigments in different coating formulations are guidance or starting formulations offered by pigment, additive, and resin manufacturers. These are available upon request from the technical service unit of these companies. Coating formulations can also be found scattered in books on coating and formulation technology [4, 5, 18, 23,24,25,26,27]. This overview can in no way claim to be complete, as the literature and relevant journals in this field are far too extensive. Nevertheless, it remains the author’s hope that the reader will gain a comprehensive insight into the fascinating field of colorants for coatings, including its literature and current research activities and last but not least its scientific attractiveness and industrial relevance.

Importance of the Intersection of Library and Information Sciences with Systems Theory

2017 ◽  
Vol 1 (1) ◽  
Author(s):  
Hannah Lee
Keyword(s):  
System Theory ◽  
General System ◽  
General System Theory ◽  
Von Bertalanffy ◽  
Meta Level ◽  
Professional Field ◽  
The Subject ◽  
Critical Insight ◽  
Insight Into ◽  
Information Sciences

This paper is the attempt to show how system theory could provide critical insight into the transdisciplinary field of library and information sciences (LIS). It begins with a discussion on the categorization of library and information sciences as an academic and professional field (or rather, the lack of evidence on the subject) and what is exactly meant by system theory, drawing upon the general system theory established by Ludwig von Bertalanffy. The main conversation of this paper focuses on the inadequacies of current meta-level discussions of LIS and the benefits of general system theory (particularly when considering the exponential rapidity in which information travels) with LIS.

Roads of Arabia: New finds of Aqaba amphorae in the Red Sea from a newly discovered wreck site at Jeddah/Eliza shoals

2020 ◽  
Author(s):  
Rupert Brandmeier
Keyword(s):  
Saudi Arabia ◽  
Red Sea ◽  
Saudi Arabian ◽  
Maritime Archaeology ◽  
Western Coast ◽  
Research Activities ◽  
Red Sea Coast ◽  
Insight Into ◽  
Sea Coast

This paper concerns a probable shipwreck cargo of Aqaba amphorae, which was discovered during the second season of the survey project along the Saudi Arabian coast, initiated by nautical archaeologists of Philipps-University Marburg and conducted in cooperation with members of the Saudi Commission for Tourism and Heritage in autumn 2013. Seafaring and sea trade was, according to the few ancient sources and modern research activities, a hazardous endeavor in antiquity. Transport containers like the Aqaba Amphorae played a major role in sea trade, a significant number of which have been detected on various sites along the Red Sea coast and its hinterland. The chronological classification as well as the application is far from complete, and recent archaeometrical investigations help to clarify the logistical aspects of manufacturing and distribution of Aqaba amphorae. Finding a number of remains of Aqaba amphorae at a supposed shipwreck site close to Jeddah delivers new insight into the maritime routes and activities along the western coast of Saudi Arabia. The documentary material currently available is the baseline for further research in the field of maritime archaeology as it pertains to trade in the Red Sea.

Mobile-Friendly Dashboards to Display Associations Between Cited-by and Similar Journals on Mobile Health Research: A Bibliometric Study (Preprint)

2018 ◽  
Author(s):  
Tsair-Wei Chien ◽  
Hsien-Yi Wang ◽  
Yang Shao ◽  
Willy Chou
Keyword(s):  
Social Network ◽  
Mobile Health ◽  
Health Research ◽  
Similarity Criteria ◽  
Network Density ◽  
Deep Insight ◽  
Density Indices ◽  
The Subject ◽  
The Given ◽  
Insight Into

BACKGROUND Researchers often spend a great deal of time and effort retrieving related journals for their studies and submissions. Authors often designate one article and then retrieve other articles that are related to the given one using PubMed’s service for finding cited-by or similar articles. However, to date, none present the association between cited-by and similar journals related to a given journal. Authors need one effective and efficient way to find related journals on the topic of mobile health research. OBJECTIVE This study aims (1) to show the related journals for a given journal by both cited-by and similarity criteria; (2) to present the association between cited-by and similarity journals related to a given journal; (3) to inspect the patterns of network density indices among clusters classified by social network analysis (SNA); (4) to investigate the feature of Kendall's coefficient(W) of concordance. METHODS We obtained 676 abstracts since 2013 from Medline based on the keywords of ("JMIR mHealth and uHealth"[Journal]) on June 30, 2018, and plotted the clusters of related journals on Google Maps by using MS Excel modules. The features of network density indices were examined. The Kendall coefficient (W) was used to assess the concordance of clusters across indices. RESULTS This study found that (1) the journals related to JMIR mHealth and uHealth are easily presented on dashboards; (2) a mild association(=0.14) exists between cited-by and similar journals related to JMIR mHealth and uHealth; (3) the median Impact Factor were 3.37 and 2.183 based on the representatives of top ten clusters grouped by the cited-by and similar journals, respectively; (4) all Kendall’s coefficients(i.e., 0.82, 0.89, 0.92, and 0.75) for the four sets of density centrality have a statistically significant concordance (p < 0.05). CONCLUSIONS SNA provides deep insight into the relationships of related journals to a given journal. The results of this research can provide readers with a knowledge and concept diagram to use with future submissions to a given journal in the subject category of Mobile Health Research. CLINICALTRIAL Not available

Corruption Measurements: Caught Between Conceptualizing the Phenomenon and Promoting New Governance Agenda?

2021 ◽  
pp. 097226292098394
Author(s):  
Kannan Perumal
Keyword(s):  
Data Aggregation ◽  
Policy Advocacy ◽  
New Governance ◽  
Methodological Issues ◽  
Topic Evolution ◽  
Theoretical Perspectives ◽  
Control Framework ◽  
The Subject ◽  
Theoretical Issues ◽  
Insight Into

The work ‘Corruption Measurements: Caught Between Conceptualizing the Phenomenon and Promoting New Governance Agenda?’ is a qualitative study based on reviewing the literature available on the subject. It starts with the introduction that explains the evolution of the idea of measuring corruption, its relevance to governance and associated theoretical issues. The topic, ‘Evolution of Corruption Measurements’ gives an overview about different corruption indices. While the topic ‘Challenges to Corruption Measurements’ briefly introduces the challenges faced by corruption measurements, the topics ‘Conceptualizing Corruption’ and ‘Methodological Issues’ give insight into the contentions faced by corruption measurements from different theoretical perspectives. Also, explained in these sections are how the corruption measurements have conceptualized corruption over the period of three decades; and how do they keep evolving their methods in order to become more relevant in policy advocacy. Issues associated with data aggregation also are explained in-depth in this work. This work demonstrates that though continuous methodological evolution and empirical research have helped corruption measurements to improve their acceptance level, the gap that exist between corruption control framework and practice will remain a challenge to address in future if corruption measurements do not genuinely account the contextual realities.

Newsmaking criminology in Australia and New Zealand: Results from a mixed methods study of criminologists’ media engagement

2019 ◽  
Vol 53 (1) ◽  
pp. 84-101 ◽  
Author(s):  
Mary Iliadis ◽  
Imogen Richards ◽  
Mark A Wood
Keyword(s):  
New Zealand ◽  
News Media ◽  
The United States ◽  
Mixed Methods Study ◽  
The Past ◽  
Professional Duty ◽  
The Subject ◽  
Survey Responses ◽  
Insight Into ◽  
Newsmaking Criminology

‘Newsmaking criminology’, as described by Barak, is the process by which criminologists contribute to the generation of ‘newsworthy’ media content about crime and justice, often through their engagement with broadcast and other news media. While newsmaking criminological practices have been the subject of detailed practitioner testimonials and theoretical treatise, there has been scarce empirical research on newsmaking criminology, particularly in relation to countries outside of the United States and United Kingdom. To illuminate the state of play of newsmaking criminology in Australia and New Zealand, in this paper we analyse findings from 116 survey responses and nine interviews with criminologists working in universities in these two countries, which provide insight into the extent and nature of their news media engagement, and their related perceptions. Our findings indicate that most criminologists working in Australia or New Zealand have made at least one news media appearance in the past two years, and the majority of respondents view news media engagement as a professional ‘duty’. Participants also identified key political, ethical, and logistical issues relevant to their news media engagement, with several expressing a view that radio and television interviewers can influence criminologists to say things that they deem ‘newsworthy’.

scholarly journals Disintegration process in disc crushers

2013 ◽  
Vol 59 (No. 3) ◽  
pp. 98-104 ◽  
Author(s):  
P. Vaculík ◽  
J. Maloun ◽  
L. Chládek ◽  
M. Přikryl
Keyword(s):  
Food Industry ◽  
Fractional Composition ◽  
Animal Feed ◽  
Raw Materials ◽  
Specific Energy Consumption ◽  
Low Noise ◽  
Main Process ◽  
Industrial Sectors ◽  
The Subject

Grinding or crushing hard raw materials is usually a primary operation which precedes the follow-up technological processes in a number of industrial sectors. A great variety of machines using different principles of fragmentation are employed in the technology of pulverization. The food industry uses roller mills, in which the main process is the shear grinding. In the animal feed industry impact machines known as hammer mills are often used. In recent years, mills have been employed that use their frontal edges for grinding or crushing during the rotation of one of two adjacent discs. The modern design disc machines used for grinding grain have resulted from long development and their operation has a relatively low noise level with reduced dust. The separation process that occurs in the gap between the active edges of the discs can be described as shear grinding and is currently the subject of attention which is focused on the specific energy consumption and fractional composition of the product of grinding. &nbsp;

scholarly journals Breach of Treaties in the Ancient Near East

2018 ◽  
Vol 20 (1) ◽  
pp. 31-56
Author(s):  
Gábor Sulyok
Keyword(s):  
Old Testament ◽  
Relative Abundance ◽  
Near East ◽  
Ancient Near East ◽  
Persistent Problem ◽  
History Of ◽  
The Subject ◽  
Abundance And Diversity ◽  
Insight Into

AbstractThe history of the breach of treaties can be traced back to the ancient Near East. The relative abundance and diversity of contemporary sources attest that the breaking of treaty obligations must have been a rather persistent problem, and that such occurrences were regarded as events of utmost importance throughout the Bronze and Iron Ages. The present study strives to demonstrate how peoples of old may have perceived and reacted to the breach of treaties on the basis of selected writings—the Legend of Etana, the Indictment of Madduwatta, the Indictment of Mita, the plague prayers of Mursili and the Old Testament—that provide, beyond the exposition of actual or alleged facts, a deeper insight into the psychological and procedural aspects of the subject.

Feasibility of cereal straw for industrial utilization in Minnesota

2000 ◽  
Vol 15 (1) ◽  
pp. 2-8 ◽  
Author(s):  
N.C. Wagner ◽  
S. Ramaswamy ◽  
U. Tschirner
Keyword(s):  
Animal Feed ◽  
Raw Materials ◽  
Low Cost ◽  
Economic Feasibility ◽  
Raw Material ◽  
Cereal Straw ◽  
Industrial Utilization ◽  
Industrial Use ◽  
On Farm ◽  
And Storage

AbstractA pre-economic feasibility study was undertaken to determine the potential of cereal straw for industrial utilization in Minnesota. Specifically, utilizing straw for pulp and paper manufacture was of interest. The availability of cereal straw fiber supplies at various locations across the state of Minnesota, along with pre-processing issues such as transportation, harvesting, handling, and storage, are discussed and priced. The greatest economic advantage of straw for industrial use appears to be the low cost of the raw material compared to traditional raw materials. This also provides an excellent opportunity for additional income for farmers. The methodology and information provided here should be helpful in evaluating the feasibility of utilizing straw for other industrial purposes in other parts of the world. However, in some Third World countries, long-standing on-farm, traditional uses of cereal straws for fuel, fiber, and animal feed may limit their availability for industrial utilization.

scholarly journals Modeling the Supply Process Using the Application of Selected Methods of Operational Analysis

2017 ◽  
Vol 7 (1) ◽  
pp. 50-54 ◽  
Author(s):  
Mária Chovancová ◽  
Vladimír Klapita
Keyword(s):  
Inventory Management ◽  
Economic Efficiency ◽  
Raw Materials ◽  
Service Level ◽  
Effective Management ◽  
Operational Analysis ◽  
Intermediate Products ◽  
The Subject

AbstractSupply process is one of the most important enterprise activities. All raw materials, intermediate products and products, which are moved within enterprise, are the subject of inventory management and by their effective management significant improvement of enterprise position on the market can be achieved. For that reason, the inventory needs to be managed, monitored, evaluated and affected. The paper deals with utilizing the methods of the operational analysis in the field of inventory management in terms of achieving the economic efficiency and ensuring the particular customer’s service level as well.

Furnace Operation: “A Gold Mine in your Casthouse”

2009 ◽  
Vol 630 ◽  
pp. 77-84 ◽  
Author(s):  
Guillaume Girard ◽  
J. Barresi ◽  
C. Dupuis ◽  
G. Riverin
Keyword(s):  
Carbon Footprint ◽  
Raw Materials ◽  
Furnace Operation ◽  
Energy Costs ◽  
Gold Mine ◽  
Scrap Rate ◽  
Operation Knowledge ◽  
Reducing Costs ◽  
Insight Into

Scrap rate, throughput, alloy recovery and raw materials are all areas of the casthouse which usually get substantial attention as means of either increasing profits or reducing costs. However, furnaces, which are often overlooked by the casthouse, can also deliver surprisingly high savings. Moreover, these potential savings can only magnify as energy costs and pressures to reduce carbon footprint increase. This paper gives an insight into where savings can be achieved by a casthouse with proper furnace operation. Knowledge of how a furnace should be operated is often neglected but as this paper tries to highlight, developing this knowledge can be extremely worthwhile.

Sign in / Sign up

Export Citation Format

Share Document