scholarly journals Disintegration process in disc crushers

2013 ◽  
Vol 59 (No. 3) ◽  
pp. 98-104 ◽  
Author(s):  
P. Vaculík ◽  
J. Maloun ◽  
L. Chládek ◽  
M. Přikryl
Keyword(s):  
Food Industry ◽  
Fractional Composition ◽  
Animal Feed ◽  
Raw Materials ◽  
Specific Energy Consumption ◽  
Low Noise ◽  
Main Process ◽  
Industrial Sectors ◽  
The Subject

Grinding or crushing hard raw materials is usually a primary operation which precedes the follow-up technological processes in a number of industrial sectors. A great variety of machines using different principles of fragmentation are employed in the technology of pulverization. The food industry uses roller mills, in which the main process is the shear grinding. In the animal feed industry impact machines known as hammer mills are often used. In recent years, mills have been employed that use their frontal edges for grinding or crushing during the rotation of one of two adjacent discs. The modern design disc machines used for grinding grain have resulted from long development and their operation has a relatively low noise level with reduced dust. The separation process that occurs in the gap between the active edges of the discs can be described as shear grinding and is currently the subject of attention which is focused on the specific energy consumption and fractional composition of the product of grinding.  

scholarly journals Nutritive value of fodder mixes for nutrition of cattle in territory of Republic of Serbia

2010 ◽  
Vol 64 (1-2) ◽  
pp. 75-81
Author(s):  
Dragan Sefer ◽  
Radmila Markovic ◽  
Marcela Speranda ◽  
Branko Petrujkic
Keyword(s):  
Dairy Cows ◽  
Food Industry ◽  
Nutritive Value ◽  
Animal Feed ◽  
Raw Materials ◽  
Strict Adherence ◽  
Official Gazette ◽  
Intensive Breeding ◽  
Satisfactory Quality

Over a period of five years (2005-2009), the laboratory of the Department for Nutrition and Botanic analyzed 22 samples of mixes from the territory of Serbia, intended for the diet of two categories of cattle (fattening calves I and dairy cows with over 20 liters of milk). The analysis was performed using standard methods, and the obtained results were compared with the quality conditions prescribed under the Regulations on quality and other requirements for animal feed (SRY Official Gazette numbers 20/00 and 38/01). Intensive breeding of cattle implies the use of concentrated mixes for all categories which are adapted to the age and purpose of maintenance of the animals. The mixes are products of the animal food industry, and they are obtained through an established technological procedure using the required raw materials. The inadequate quality of raw materials causes problems involving the quality of the finished products, so that strict adherence to the established recipes does not necessary result in a satisfactory quality of the mixes. All of the above imposes the need for the constant monitoring of the nutritive value of the mixes, and consequently also of their quality. On the grounds of the analysis of the presence of the elementary nutritive matter, no significant differences were established with regard to the prescribed quantity of nutritive matter, so that the use of the examined mixes in the diets of the respective categories of cattle can be expected to yield satisfactory production results. .

scholarly journals Exogenous Enzymes as Zootechnical Additives in Animal Feed: A Review

Catalysts ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 851
Author(s):  
Brianda Susana Velázquez-De Lucio ◽  
Edna María Hernández-Domínguez ◽  
Matilde Villa-García ◽  
Gerardo Díaz-Godínez ◽  
Virginia Mandujano-Gonzalez ◽  
...  
Keyword(s):  
Food Industry ◽  
Animal Feed ◽  
Raw Material ◽  
Animal Nutrition ◽  
Productive Performance ◽  
Feed Industry ◽  
Industrial Sectors ◽  
Exogenous Enzymes ◽  
Reducing Costs ◽  
A Current

Enzymes are widely used in the food industry. Their use as a supplement to the raw material for animal feed is a current research topic. Although there are several studies on the application of enzyme additives in the animal feed industry, it is necessary to search for new enzymes, as well as to utilize bioinformatics tools for the design of specific enzymes that work in certain environmental conditions and substrates. This will allow the improvement of the productive parameters in animals, reducing costs and making the processes more efficient. Technological needs have considered these catalysts as essential in many industrial sectors and research is constantly being carried out to optimize their use in those processes. This review describes the enzymes used in animal nutrition, their mode of action, their production and new sources of production as well as studies on different animal models to evaluate their effect on the productive performance intended for the production of animal feed.

Problems of ensuring metrological traceability of measurement results of indicators of quality for food products and food raw materials

2020 ◽  
pp. 64-70
Author(s):  
Mariya Y. Medvedevskikh ◽  
Anna S. Sergeeva
Keyword(s):  
Reference Materials ◽  
Mass Fraction ◽  
Nutritional Value ◽  
Animal Feed ◽  
Raw Materials ◽  
Meat Products ◽  
Metrological Traceability ◽  
Food Products ◽  
Freeze Dried ◽  
Measurement Results

The article raises the problem of ensuring metrological traceability of the measurement results of indicators of quality and nutritional value for food products and food raw materials: water (moisture), nitrogen (protein, crude protein), fat, ash and carbohydrates. The problem under consideration can be solved by applying reference materials of food composition, traceable to state primary measurement standards GET 173-2017 and GET 176-2019 and primary reference measurement procedures (PRMP), for attestation of measurement procedures and accuracy checking of measurement results. The article discusses the results of the PRMP development of mass fraction of fat, ash and carbohydrates in food products and food raw materials, as well as mass fraction of crude fat (oil content) in oil crops seeds and products based on them. The paper also presents metrological characteristics of reference materials of composition of dry dairy products, grain-milk dry porridges for nutrition of babies, grain dry porridges for nutrition of babies, egg powder, freeze-dried meat products, animal feed. The results of the work allow for building a chain of metrological traceability from GET 173-2017, GET 176-2019 and PRMP to routine measurement procedures, thereby ensuring the uniformity of measurements of nutritional value of food products.

Technology and Formation Improvement of Consumer Properties of Cold Appetizers from a Silver Carp in the Roll Form

Food Industry ◽  
2019 ◽  
Vol 4 (4) ◽  
pp. 14-22
Author(s):  
Olesya Sergeevna ◽  
Adelya Bekesheva
Keyword(s):  
Fatty Acids ◽  
Food Industry ◽  
Raw Materials ◽  
Silver Carp ◽  
Essential Amino Acids ◽  
Development Stage ◽  
Roll Forming ◽  
Fish Gelatin ◽  
Organoleptic Characteristics ◽  
Food Value

At the present development stage of fish culinary production special significance has range expanding and technology improving for the following purposes: the available fish resources use; the organoleptic characteristics improvement and the nutritional value and competitiveness increase of products manufactured at the enterprises of the food industry. This study concerns the technology and the consumer properties formation improvement of cold appetizers from silver carp in the form of a roll. Unlike traditional the developed products consist of fillet of a bighead silver carp on a skin and an original stuff from egg, vegetables and mushrooms. The researchers conducted study using conventional and special methods. They recommended to introduce gelatin in a dry powdered at the stage of roll forming form in a recipe of the developed fish rolls. A man tested fish gelatin as anew consistency regulator of the developed products. The traditional and fish gelatin use allows to increase the yield of fish cold appetizers in the form of a roll by 8.0 %. When adding gelatin, there was an improvement in consistency and sensory perception of the product as a whole. The analysis results of biological value showed that the developed dishes, being an important additional source of protein and essential amino acids such as threonine, lysine, valine, may well improve the ration balance. The fatty acids ratio in fish rolls prepared according to new recipes is close to the ideal fat in the ratio of saturated, monounsaturated and polyunsaturated fatty acids (35:45:20) and is determined mainly by the composition of fatty acids in silver carp fat. The developed production will allow to expand the range of the food industry enterprises by cold fish appetizers of high quality and food value from available fish raw materials.

Innovations in Food Production - Status and Directions of Development

2012 ◽  
Vol 7 (2) ◽  
pp. 183-193
Author(s):  
Barbara Grzybowska
Keyword(s):  
Functional Food ◽  
Food Production ◽  
Food Industry ◽  
Statistical Data ◽  
New Products ◽  
Technological Innovations ◽  
The Status ◽  
Product Manufacturing ◽  
The Subject ◽  
And Storage

This paper characterises the directions of innovative activities undertaken by food industry enterprises concerning the manufacturing of food products. Based on the subject literature and secondary statistical data, the status of food industry innovativeness and areas of innovative activities related to implementation of technological and non-technological innovations are presented. The activities of enterprises focus on manufacturing new products in response to the ever-changing needs and expectations of consumers. In particular, the production of so-called functional food (which seeks to promote health, minimise the risk of specific diseases, improve psychophysical fitness, lose weight, etc.) is increasingly extensive. Manufacturers must also improve the technologies and techniques of product manufacturing, packaging and storage. 

The sugar and alcohol industry in the biofuels and cogeneration era: a paradigm change (part II)

2014 ◽  
pp. 97-104 ◽  
Author(s):  
Electo Eduardo Silv Lora ◽  
Mateus Henrique Rocha ◽  
José Carlos Escobar Palacio ◽  
Osvaldo José Venturini ◽  
Maria Luiza Grillo Renó ◽  
...  
Keyword(s):  
Large Scale ◽  
New Technologies ◽  
Process Integration ◽  
Animal Feed ◽  
Raw Materials ◽  
Biofuel Production ◽  
New Paradigm ◽  
Alcohol Industry ◽  
Feed Production ◽  
Steam Parameters

The aim of this paper is to discuss the major technological changes related to the implementation of large-scale cogeneration and biofuel production in the sugar and alcohol industry. The reduction of the process steam consumption, implementation of new alternatives in driving mills, the widespread practice of high steam parameters use in cogeneration facilities, the insertion of new technologies for biofuels production (hydrolysis and gasification), the energy conversion of sugarcane trash and vinasse, animal feed production, process integration and implementation of the biorefinery concept are considered. Another new paradigm consists in the wide spreading of sustainability studies of products and processes using the Life Cycle Assessment (LCA) and the implementation of sustainability indexes. Every approach to this issue has as an objective to increase the economic efficiency and the possibilities of the sugarcane as a main source of two basic raw materials: fibres and sugar. The paper briefly presents the concepts, indicators, state-of-the-art and perspectives of each of the referred issues.

Pendayagunaan Sampah Menjadi Produk Kerajinan

2017 ◽  
Vol 17 (1) ◽  
pp. 83
Author(s):  
Nur Fatoni ◽  
Rinaldy Imanuddin ◽  
Ahmad Ridho Darmawan
Keyword(s):  
Waste Management ◽  
Raw Materials ◽  
Economic Value ◽  
Waste Materials ◽  
Waste Collection ◽  
Garbage Disposal ◽  
Waste Separation ◽  
And Training

Waste management is still defined as limited to collection, transportation and garbage disposal. The follow-up of the meaning is the provision of facilities such as garbage bins, garbage trucks and waste collection land. Waste management has not included waste separation. Segregation of waste can minimize the amount of waste that must be discharged to the final place. Segregation of waste can supply recyclable raw materials and handicrafts made from garbage. The manufacture of handicraft products from garbage is still local and requires socialization and training. It is needed to increase the number of craftsmen and garbage absorption on the crafters. Through careful socialization and training, citizens' awareness of waste management becomes advanced by making handicrafts of economic value from waste materials.

scholarly journals Discovery of a natural cyan blue: A unique food-sourced anthocyanin could replace synthetic brilliant blue

2021 ◽  
Vol 7 (15) ◽  
pp. eabe7871
Author(s):  
Pamela R. Denish ◽  
Julie-Anne Fenger ◽  
Randall Powers ◽  
Gregory T. Sigurdson ◽  
Luca Grisanti ◽  
...  
Keyword(s):  
Protein Design ◽  
Food Industry ◽  
Chemical Structure ◽  
Nutritional Value ◽  
Blue Dye ◽  
Spectroscopic Techniques ◽  
Design Tools ◽  
Enzymatic Transformation ◽  
Food And Beverage ◽  
The Subject

The color of food is critical to the food and beverage industries, as it influences many properties beyond eye-pleasing visuals including flavor, safety, and nutritional value. Blue is one of the rarest colors in nature’s food palette—especially a cyan blue—giving scientists few sources for natural blue food colorants. Finding a natural cyan blue dye equivalent to FD&C Blue No. 1 remains an industry-wide challenge and the subject of several research programs worldwide. Computational simulations and large-array spectroscopic techniques were used to determine the 3D chemical structure, color expression, and stability of this previously uncharacterized cyan blue anthocyanin-based colorant. Synthetic biology and computational protein design tools were leveraged to develop an enzymatic transformation of red cabbage anthocyanins into the desired anthocyanin. More broadly, this research demonstrates the power of a multidisciplinary strategy to solve a long-standing challenge in the food industry.

scholarly journals Rose Flowers—A Delicate Perfume or a Natural Healer?

Biomolecules ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 127
Author(s):  
Milka Mileva ◽  
Yana Ilieva ◽  
Gabriele Jovtchev ◽  
Svetla Gateva ◽  
Maya Margaritova Zaharieva ◽  
...  
Keyword(s):  
Essential Oils ◽  
Food Industry ◽  
Raw Materials ◽  
Biological Activities ◽  
Biological Properties ◽  
Rosa Damascena ◽  
Oil Sand ◽  
Rosa Gallica ◽  
Therapeutic Properties ◽  
Phytochemical Profile

Plants from the Rosacea family are rich in natural molecules with beneficial biological properties, and they are widely appreciated and used in the food industry, perfumery, and cosmetics. In this review, we are considering Rosa damascena Mill., Rosa alba L., Rosa centifolia L., and Rosa gallica L. as raw materials important for producing commercial products, analyzing and comparing the main biological activities of their essential oils, hydrolates, and extracts. A literature search was performed to find materials describing (i) botanical characteristics; (ii) the phytochemical profile; and (iii) biological properties of the essential oil sand extracts of these so called “old roses” that are cultivated in Bulgaria, Turkey, India, and the Middle East. The information used is from databases PubMed, Science Direct, and Google Scholar. Roses have beneficial healing properties due to their richness of beneficial components, the secondary metabolites as flavonoids (e.g., flavones, flavonols, anthocyanins), fragrant components (essential oils, e.g., monoterpenes, sesquiterpenes), and hydrolysable and condensed tannins. Rose essential oils and extracts with their therapeutic properties—as respiratory antiseptics, anti-inflammatories, mucolytics, expectorants, decongestants, and antioxidants—are able to act as symptomatic prophylactics and drugs, and in this way alleviate dramatic sufferings during severe diseases.

Sign in / Sign up

Export Citation Format

Share Document