Experimental Methodologies: Two Case Studies Investigating the Syntax- Discourse Interface

2013 ◽  
Vol 6 (1) ◽  
Author(s):  
Timothy Gupton ◽  
Tania Leal Méndez
Keyword(s):  
Experimental Data ◽  
Quantitative Data ◽  
Native Speaker ◽  
Experimental Methods ◽  
Experimental Investigations ◽  
Experimenter Bias ◽  
Current Article ◽  
Theoretical Syntax ◽  
Discourse Interface ◽  
L1 And L2

AbstractThe current article examines two experimental investigations of the syntaxdiscourse interface, which address theoretical questions in different ways: the first is an L1 investigation of Galician speakers in Gupton (2010) and the second is a dual investigation of L1 and L2 Spanish reported on in Leal Méndez & Slabakova (2011). These investigations gathered quantitative data via psycholinguistic tasks with accompanying audio utilizing the WebSurveyor platform. They involved counterbalanced designs and were followed by statistical analysis. While acknowledging that experimental data does not have primacy over intuitive data, the authors endorse the use of experimental methods of data elicitation (such as the ones already used in generative SLA research) in theoretical syntax in order to avoid experimenter bias and to get a more complete picture of native speaker intuition and competencies.

Influence of Vacancies on Optical Properties of Sic Nanocrystallites

1999 ◽  
Vol 579 ◽  
Author(s):  
K.J. Plucinski ◽  
I.V. Kityk ◽  
A. Kassiba ◽  
C. Charpentier
Keyword(s):  
Experimental Data ◽  
Optical Properties ◽  
Experimental Methods ◽  
The Other ◽  
Experimental Investigations ◽  
Dynamic Boundary Conditions ◽  
Band Energy ◽  
Grain Sizes ◽  
Dynamics Simulations ◽  
Theoretical Simulations

ABSTRACTTo investigate the origin of vacancies in SiC nanopowders, complex theoretical and experimental investigations of SiC nanopowders of different geometry sizes were carried out. Our theoretical approach included ab initio band energy calculations and molecular dynamics simulations with dynamic boundary conditions. Experimental methods included EPR spectra. The significant influence of nanocrystallite and grain sizes on the concentration and type of vacancies is demonstrated. On the other hand, our comparison of experimental data and theoretical simulations show that vacancies influence the optical properties of SiC nanocrystallites.

CLINICAL INVESTIGATIONS OF A LONG-ACTING OESTRIOL (POLYOESTRIOL PHOSPHATE)

1961 ◽  
Vol 38 (1) ◽  
pp. 73-87 ◽  
Author(s):  
Christian Lauritzen ◽  
Semih Velibese
Keyword(s):  
Side Effects ◽  
Phosphoric Acid ◽  
Quantitative Data ◽  
Water Soluble ◽  
Cholesterol Concentration ◽  
Experimental Investigations ◽  
Clinical Investigations ◽  
Prolonged Duration ◽  
High Doses ◽  
Long Acting

ABSTRACT A description is given of experimental investigations and preliminary clinical experience with the long-acting oestriol compound polyoestriol phosphate – a water-soluble polymere of oestriol and phosphoric acid. The compound seems to exert all the physiologically important effects of oestriol. Even with high doses the hormone causes no proliferation of the endometrium and no withdrawal bleeding. It has no untoward effect on metabolism. It decreases slightly the cholesterol concentration (to the extent of ⅓–⅕ of the effect produced by long-acting oestradiol esters). The compound has a wide therapeutic range. No side-effects have been observed. Doses of 10 mg or more have a prolonged duration. Additional prolongation of the effect is largely dependent on dosage. To ensure an effect lasting for 4 weeks 40 mg polyoestriol phosphate (corresponding with 30 mg oestriol) is required – an amount which roughly corresponds with physiological quantitative data. The compound, which involves an interesting new principle of prolongation, was most effectively used in the treatment of menopausal symptoms and genital organic disorders. For these indications it can be recommended without reservation.

scholarly journals Phase Relations in the ZrO2-MgO-FeOx System: Experimental Data and Assessment of Thermodynamic Parameters

2021 ◽  
Author(s):  
Ivan Saenko ◽  
O. Fabrichnaya
Keyword(s):  
Electron Microscopy ◽  
Experimental Data ◽  
Solid Solution ◽  
Thermodynamic Parameters ◽  
Spinel Phase ◽  
Experimental Investigations ◽  
X Ray ◽  
Heat Treated ◽  
Preliminary Phase ◽  
Scanning Electron

AbstractThermodynamic parameters were assessed for the MgO–FeOx system and combined with already available descriptions of ZrO2-FeOx and ZrO2-MgO systems to calculate preliminary phase diagrams for planning experimental investigations. Samples of selected compositions were heat treated at 1523, 1673 and 1873 K and characterized using x-ray and scanning electron microscopy combined with energy dispersive x-ray spectroscopy (SEM/EDX). Experiments indicated extension of cubic ZrO2 solid solution into the ternary system at 1873 K (75 mol.% ZrO2, 10 mol.% FeOx and 15 mol.% MgO) and limited solubility of 4 mol.% ZrO2 in spinel phase. Based on the obtained results thermodynamic parameters of C-ZrO2 and spinel phase were optimized.

scholarly journals Validation of MATLAB algorithm to implement a two-step parallel pyrolysis model for the prediction of maximum %char yield

2021 ◽  
Vol 1 (1) ◽  
Author(s):  
Ibiba Taiwo Horsfall ◽  
Macmanus Chinenye Ndukwu ◽  
Fidelis Ibiang Abam ◽  
Ololade Moses Olatunji ◽  
Ojong Elias Ojong ◽  
...  
Keyword(s):  
Experimental Data ◽  
Isothermal Condition ◽  
Char Yield ◽  
Experimental Investigations ◽  
Time Saving ◽  
Pyrolysis Products ◽  
Pyrolysis Model ◽  
Experimental Yield ◽  
By Products ◽  
Good Agreement

AbstractNumerical modeling of biomass pyrolysis is becoming a cost and time-saving alternative for experimental investigations, also to predict the yield of the by-products of the entire process. In the present study, a two-step parallel kinetic model was used to predict char yield under isothermal condition. MATLAB ODE45 function codes were employed to solve a set of differential equations that predicts the %char at varying residence times and temperatures. The code shows how the various kinetic parameters and mass of pyrolysis products were determined. Nevertheless, the algorithm used for the prediction was validated with experimental data and results from past works. At 673.15 K, the numerical simulation using ODE45 function gives a char yield of 27.84%. From 573.15 K to 673.15 K, char yield ranges from 31.7 to 33.72% to 27.84% while experimental yield decreases from 44 to 22%. Hence, the error between algorithm prediction and experimental data from literature is − 0.26 and 0.22. Again, comparing the result of the present work with the analytical method from the literature showed a good agreement.

PROCESSING OF THE REDUCED RELATIVE CLAUSE VERSUS MAIN VERB AMBIGUITY IN L2 LEARNERS AT DIFFERENT PROFICIENCY LEVELS

2010 ◽  
Vol 32 (1) ◽  
pp. 79-109 ◽  
Author(s):  
Anne Rah ◽  
Dany Adone
Keyword(s):  
Relative Clause ◽  
Native Speaker ◽  
Control Group ◽  
Garden Path ◽  
Online Processing ◽  
L2 Learners ◽  
L1 Influence ◽  
Versus Main ◽  
Main Verb ◽  
L1 And L2

This article presents new evidence from offline and online processing of garden-path sentences that are ambiguous between reduced relative clause resolution and main verb resolution. The participants of this study are intermediate and advanced German learners of English who have learned the language in a nonimmersed context. The results show that for second language (L2) learners, there is a dissociation between parsing mechanisms and grammatical knowledge: The learners successfully process the structures in question offline, but the online self-paced reading task shows different patterns for the L2 learners and the native-speaker control group. The results are discussed with regard to shallow processing in L2 learners (Clahsen & Felser, 2006). Because the structures in question differ in English and German, first language (L1) influence is also discussed as an explanation for the findings. The comparison of the three participant groups’ results points to a gradual rather than a fundamental difference between L1 and L2 processing.

Leakage Flow Investigations on a Through-Wall Crack Related to Thermal Fatigue of Nuclear Power Plant Piping

2017 ◽  
Author(s):  
Stefan Schmid ◽  
Rudi Kulenovic ◽  
Eckart Laurien
Keyword(s):  
Experimental Data ◽  
Nuclear Power ◽  
Numerical Models ◽  
Measurement Techniques ◽  
Experimental Investigations ◽  
Leakage Flow ◽  
Test Rig ◽  
Reduced Pressure ◽  
Flow Rates ◽  
Set Up

For the validation of empirical models to calculate leakage flow rates in through-wall cracks of piping, reliable experimental data are essential. In this context, the Leakage Flow (LF) test rig was built up at the IKE for measurements of leakage flow rates with reduced pressure (maximum 1 MPA) and temperature (maximum 170 °C) compared to real plant conditions. The design of the test rig enables experimental investigations of through-wall cracks with different geometries and orientations by means of circular blank sheets with integrated cracks which are installed in the tubular test section of the test rig. In the paper, the experimental LF set-up and used measurement techniques are explained in detail. Furthermore, first leakage flow measurement results for one through-wall crack geometry and different imposed fluid pressures at ambient temperature conditions are presented and discussed. As an additional aspect the experimental data are used for the determination of the flow resistance of the investigated leak channel. Finally, the experimental results are compared with numerical results of WinLeck calculations to prove specifically in WinLeck implemented numerical models.

scholarly journals Supplemental Material: Abrasion regimes in fluvial bedrock incision

2021 ◽  
Author(s):  
Alexander Beer ◽  
Michael Lamb
Keyword(s):  
Experimental Data ◽  
Experimental Methods

Additional details on the experimental methods, experimental data, Figs S1–S3, and Tables S1–S3.<br>

scholarly journals Investigation of Native Speaker and Second Language Learner Intuition of Collocation Frequency

2021 ◽  
Author(s):  
Anna Siyanova ◽  
S Spina
Keyword(s):  
Language Learning ◽  
High Frequency ◽  
Native Speakers ◽  
Native Speaker ◽  
Low Frequency ◽  
Language Learner ◽  
Very Low Frequency ◽  
Second Language Learner ◽  
L2 Learners ◽  
L1 And L2

© 2015 Language Learning Research Club, University of Michigan. Research into frequency intuition has focused primarily on native (L1) and, to a lesser degree, nonnative (L2) speaker intuitions about single word frequency. What remains a largely unexplored area is L1 and L2 intuitions about collocation (i.e., phrasal) frequency. To bridge this gap, the present study aimed to answer the following question: How do L2 learners and native speakers compare against each other and corpora in their subjective judgments of collocation frequency? Native speakers and learners of Italian were asked to judge 80 noun-adjective pairings as one of the following: high frequency, medium frequency, low frequency, very low frequency. Both L1 and L2 intuitions of high frequency collocations correlated strongly with corpus frequency. Neither of the two groups of participants exhibited accurate intuitions of medium and low frequency collocations. With regard to very low frequency pairings, L1 but not L2 intuitions were found to correlate with corpora for the majority of the items. Further, mixed-effects modeling revealed that L2 learners were comparable to native speakers in their judgments of the four frequency bands, although some differences did emerge. Taken together, the study provides new insights into the nature of L1 and L2 intuitions about phrasal frequency.

scholarly journals DECIPHERING THE FINEST IMPRINT OF GLACIAL EROSION: OBJECTIVE ANALYSIS OF STRIAE PATTERNS ON BEDROCK

2011 ◽  
Vol 23 (3) ◽  
pp. 135 ◽  
Author(s):  
Piet Stroeven ◽  
Arjen Peter Stroeven ◽  
Jing Hu ◽  
Jean-Louis Chermant ◽  
Michel Coster
Keyword(s):  
Experimental Data ◽  
Image Analysis ◽  
Fourier Transform ◽  
Fast Fourier Transform ◽  
Orientation Distribution ◽  
Experimental Investigations ◽  
Automatic Image Analysis ◽  
Glacial Erosion ◽  
Analysis Techniques ◽  
Image Analysis Techniques

The aim of this study is to compare the efficiency of different mathematical and statistical geometrical methods applied to characterise the orientation distribution of striae on bedrock for deciphering the finest imprint of glacial erosion. The involved methods include automatic image analysis techniques of Fast Fourier Transform (FFT), and the experimental investigations by means of Saltikov's directed secants analysis (rose of intersection densities), applied to digital and analogue images of the striae pattern, respectively. In addition, the experimental data were compared with the modelling results made on the basis of Underwood's concept of linear systems in a plane. The experimental and modelling approaches in the framework of stereology yield consistent results. These results reveal that stereological methods allow a reliable and efficient delineation of different families of glacial striae from a complex record imprinted in bedrock.

Mathematical Modelling of Materials Behavior Under Creep Conditions

2001 ◽  
Vol 54 (2) ◽  
pp. 107-132 ◽  
Author(s):  
J. Betten
Keyword(s):  
Experimental Data ◽  
Mathematical Modelling ◽  
Mechanical Behavior ◽  
Review Article ◽  
Material Behavior ◽  
Experimental Investigations ◽  
Rational Basis ◽  
Complex Material ◽  
Interpolation Methods ◽  
Materials Behavior

This article will provide a short survey of some recent advances in the mathematical modelling of materials behavior under creep conditions. The mechanical behavior of anisotropic solids requires a suitable mathematical modelling. The properties of tensor functions with several argument tensors constitute a rational basis for a consistent mathematical modelling of complex material behavior. This article presents certain principles, methods, and recent successful applications of tensor functions in creep mechanics. The rules for specifying irreducible sets of tensor invariants and tensor generators for material tensors of rank two and four are also discussed. Furthermore, it is very important that the scalar coefficients in constitutive and evolutional equations are determined as functions of the integrity basis and experimental data. It is explained in detail that these coefficients can be determined by using tensorial interpolation methods. Some examples for practical use are discussed. Finally, we have carried out our own experiments to examine the validity of the mathematical modelling. Furthermore, an overview of some important experimental investigations in creep mechanics of other scientists has been provided. There are 243 references cited in this review article.

Sign in / Sign up

Export Citation Format

Share Document