scholarly journals Effect of mineral additives on structure and properties of concrete for pavements

2017 ◽  
Vol 12 (2) ◽  
pp. 95-100
Author(s):  
Khrystyna Sobol ◽  
Taras Markiv ◽  
Oleksii Hunyak
Keyword(s):  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Asphalt Pavements ◽  
Partial Replacement ◽  
Attractive Alternative ◽  
Concrete Pavements ◽  
Structure And Properties ◽  
Chemical Admixtures ◽  
Mineral Additives ◽  
Calcium Hydrosilicate

Abstract Concrete pavements is an attractive alternative to asphalt pavements because of its lower cost and higher durability. Major contribution to sustainable development can be made by partial replacement of cement in concrete pavement with supplementary cementitious materials of different nature and origin. In this paper, the effect of natural zeolite and perlite additives in complex with chemical admixtures on the structure and properties of concrete for pavement was studied. Compressive and flexural strength test was used to study the mechanical behavior of designed concrete under load. Generally, the compressive strength of both control concrete and concrete containing mineral additives levels at the later ages of hardening. The microstructure analysis of concrete with mineral additives of different nature activity showed the formation of additional amount of hydration products such as tobermorite type calcium hydrosilicate which provide self-reinforcement of hardening concrete system.

scholarly journals Use of Treated Non-Ferrous Metallurgical Slags as Supplementary Cementitious Materials in Cementitious Mixtures

2021 ◽  
Vol 11 (9) ◽  
pp. 4028
Author(s):  
Asghar Gholizadeh Vayghan ◽  
Liesbeth Horckmans ◽  
Ruben Snellings ◽  
Arne Peys ◽  
Priscilla Teck ◽  
...  
Keyword(s):  
Mechanical Performance ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Partial Replacement ◽  
Strength Development ◽  
Supplementary Cementitious Material ◽  
Performance Requirements ◽  
Metallurgical Slags ◽  
Leaching Behaviour ◽  
Kinetics Of

This research investigated the possibility of using metallurgical slags from the copper and lead industries as partial replacement for cement. The studied slags were fayalitic, having a mainly ferro-silicate composition with minor contents of Al2O3 and CaO. The slags were treated at 1200–1300 °C (to reduce the heavy metal content) and then granulated in water to promote the formation of reactive phases. A full hydration study was carried out to assess the kinetics of reactions, the phases formed during hydration, the reactivity of the slags and their strength activity as supplementary cementitious material (SCM). The batch-leaching behaviour of cementitious mixtures incorporating treated slags was also investigated. The results showed that all three slags have satisfactory leaching behaviour and similar performance in terms of reactivity and contribution to the strength development. All slags were found to have mediocre reactivity and contribution to strength, especially at early ages. Nonetheless, they passed the minimum mechanical performance requirements and were found to qualify for use in cement.

scholarly journals A Review of the Mechanical Properties and Durability of Ecological Concretes in a Cold Climate in Comparison to Standard Ordinary Portland Cement-Based Concrete

Materials ◽  
2020 ◽  
Vol 13 (16) ◽  
pp. 3467
Author(s):  
Ankit Kothari ◽  
Karin Habermehl-Cwirzen ◽  
Hans Hedlund ◽  
Andrzej Cwirzen
Keyword(s):  
Carbon Dioxide ◽  
Portland Cement ◽  
Ordinary Portland Cement ◽  
Cementitious Materials ◽  
Cold Climate ◽  
Supplementary Cementitious Materials ◽  
Short Exposure ◽  
Chemical Admixtures ◽  
Composite Cements ◽  
Alkali Activated

Most of the currently used concretes are based on ordinary Portland cement (OPC) which results in a high carbon dioxide footprint and thus has a negative environmental impact. Replacing OPCs, partially or fully by ecological binders, i.e., supplementary cementitious materials (SCMs) or alternative binders, aims to decrease the carbon dioxide footprint. Both solutions introduced a number of technological problems, including their performance, when exposed to low, subfreezing temperatures during casting operations and the hardening stage. This review indicates that the present knowledge enables the production of OPC-based concretes at temperatures as low as −10 °C, without the need of any additional measures such as, e.g., heating. Conversely, composite cements containing SCMs or alkali-activated binders (AACs) showed mixed performances, ranging from inferior to superior in comparison with OPC. Most concretes based on composite cements require pre/post heat curing or only a short exposure to sub-zero temperatures. At the same time, certain alkali-activated systems performed very well even at −20 °C without the need for additional curing. Chemical admixtures developed for OPC do not always perform well in other binder systems. This review showed that there is only a limited knowledge on how chemical admixtures work in ecological concretes at low temperatures and how to accelerate the hydration rate of composite cements containing high amounts of SCMs or AACs, when these are cured at subfreezing temperatures.

scholarly journals The Potentials of Iron and Steel Slags as Supplementary Cementitious Materials in the Nigerian Construction Industry: A Review

2018 ◽  
Vol 2 (2) ◽  
pp. 208-218
Author(s):  
O. R. Ogirigbo ◽  
J. O. Ukpata ◽  
I. Inerhunwa
Keyword(s):  
Portland Cement ◽  
Construction Industry ◽  
Waste Product ◽  
Steel Production ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Partial Replacement ◽  
Iron And Steel ◽  
Tropical Environments ◽  
Iron And Steel Production

Ground Granulated Blast Furnace Slag (GGBS) is a type of Supplementary Cementitious Material (SCM) that is currently being used extensively in the global construction industry. SCMs are cheaper than Portland cement, help to improve certain properties of concrete and also help to reduce the environmental footprint associated with the production of Portland cement. GGBS is readily available in most parts of the world as a waste product from iron and steel production. However, its use as a SCM in some countries has not been fully maximized. This is primarily because of lack of documented studies on the properties of GGBS that influences its suitability as a SCM, especially in tropical environments. This paper reviewed the use of GGBS as a SCM for the partial replacement of Portland cement, with particular emphasis on its potential use in tropical warm environments such as Nigeria and other similar countries.

The Effect of Homogenization Procedure on Mechanical Properties of High-Performance Concrete with Partial Replacement of Cement by Supplementary Cementitious Materials

2019 ◽  
Vol 292 ◽  
pp. 102-107 ◽  
Author(s):  
Josef Fládr ◽  
Petr Bílý ◽  
Karel Šeps ◽  
Roman Chylík ◽  
Vladimír Hrbek
Keyword(s):  
Mechanical Properties ◽  
Fly Ash ◽  
Water Content ◽  
High Performance ◽  
High Performance Concrete ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Partial Replacement ◽  
Depth Of Penetration ◽  
Cement Additive

High-performance concrete is a very specific type of concrete. Its production is sensitive to both the quality of compounds used and the order of addition of particular compounds during the homogenization process. The mechanical properties were observed for four dosing procedures of each of the three tested concrete mixtures. The four dosing procedures were identical for the three mixes. The three mixes varied only in the type of supplementary cementitious material used and in water content. The water content difference was caused by variable k-value of particular additives. The water-to-binder ratio was kept constant for all the concretes. The additives used were metakaolin, fly ash and microsilica. The comparison of particular dosing procedures was carried out on the values of basic mechanical properties of concrete. The paper compares compressive strength and depth of penetration of water under pressure. Besides the comparsion of macro-mechanical properties, the effect of microsilica and fly ash additives on micro-mechanical properties was observed with the use of scanning electron microscopy (SEM) and nanoindentation data analysis. Nanoindentation was used to determine the thickness and strength of interfacial transition zone (ITZ) for different sequence of addition of cement, additive and aggregate. The thickness obtained by nanoindentation was further investigated by SEM EDS line scanning.

scholarly journals A Study on Porous Sealing Efficacy of hydrophilic Admixture on Blended Cement Concrete

2018 ◽  
Vol 7 (2.12) ◽  
pp. 446
Author(s):  
L Krishnaraj ◽  
P T. Ravichandran ◽  
M V.A.Karthik ◽  
N Satheeshram Avudaiyappan ◽  
. .
Keyword(s):  
Blended Cement ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Partial Replacement ◽  
Chloride Permeability ◽  
Split Tensile Strength ◽  
Micro Cracks ◽  
Significant Strength ◽  
Strength And Durability ◽  
Durability Of Concrete

The life of the concrete is strongly influenced by durability parameters. The permeability is one of the main characteristics influencing the durability of concrete. The concrete is more permeable due to the ingress of water, oxygen, chloride, sulphate, and other potential deleterious substances. The durability of concrete is mainly affected by pore structure system of concrete and addingthe supplementary cementitious materials (SCM), such as fly ash, slag cement, and silica fume can be decrease permeability. Crystalline technology enhances the strength of concrete by filling the poresand micro-cracks with non-dissolvable substances. To study the efficiency of crystalline formation in concrete in terms of more permeable should be guaranteed through a specific technique.The effectiveness of crystalline waterproofing system with partial replacement cement by GGBS is studiedin terms of strength and durability. The performance of the two different types of crystalline waterproofing integral admixtures has been studied for compressive strength, Split tensile strength, workability, water permeability, Rapid chloride permeability test and porosity in this paper.The early strength increased in GGBS with crystalline admixture concretes compare to the control concrete. No significant strength reduction is observed in GGBS concretes with crystalline admixture when replaced with 20% and 40% of cement than control concrete.  

Improving the Durability of High Early Strength (HES) Concrete Patching Materials for Concrete Pavements

2020 ◽  
Vol 2674 (8) ◽  
pp. 12-23
Author(s):  
Cameron Wilson ◽  
W. Jason Weiss
Keyword(s):  
Cement Content ◽  
Autogenous Shrinkage ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Strength Development ◽  
Concrete Pavements ◽  
Shrinkage Cracking ◽  
Concrete Mixtures ◽  
Water To Cement Ratio ◽  
Early Strength

High early strength (HES) concrete patching materials are increasingly used to repair damaged pavements. The use of HES concrete enables the repaired pavement to be opened to traffic shortly after the repair has been installed; for example, opening pavements to traffic 4–6 h after the concrete is placed is becoming more common. HES concrete mixtures are typically designed with a low water-to-cement ratio and a high cement content; they contain accelerating admixtures and limited supplementary cementitious materials. As a result, these HES patches may be susceptible to self-desiccation, causing autogenous shrinkage and early age cracking. Self-desiccation can lead to reduced hydration, limited strength gain, and overestimation of strength development in maturity-based predictions. The objectives of this study are threefold. First, the paper will illustrate how self-desiccation can lead to the premature cessation of hydration and increased potential for shrinkage cracking. Second, the paper will illustrate how maturity-based predictions can be modified to account for self-desiccation. Third, internal curing is discussed as a way to mitigate self-desiccation and shrinkage ultimately improving the performance of HES concrete patching materials.

Application of Zeolite as a Partial Replacement of Cement in Concrete Production

2014 ◽  
Vol 621 ◽  
pp. 30-34
Author(s):  
Eva Vejmelková ◽  
Dana Koňáková ◽  
Monika Čáchová ◽  
Martin Keppert ◽  
Adam Hubáček ◽  
...  
Keyword(s):  
Portland Cement ◽  
Natural Zeolite ◽  
General Rule ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Partial Replacement ◽  
Large Variability ◽  
Substitution Level ◽  
Concrete Production ◽  
Zeolite Rock

Natural zeolite rocks are known to be able to act as Supplementary Cementitious Materials (SCM) in Portland cement based concrete. Generally SCMs are reacting with portlandite and providing binding hydration products just as Portland cement does. In this way an SCM can substitute certain amount of Portland cement in concrete and thus reduce the related energy consumption and CO2 generation. Due to a large variability of SCMs composition and properties there is not any general rule for an optimum Portland cement substitution level. In this paper, the influence of natural zeolite rock on selected mechanical, hygric and thermal properties of concrete is studied. Experimental results show that the analyzed zeolite is acting as a pozzolan but for higher amounts its application leads to an increase in concrete porosity which affects its properties in a significant way.

Use of Fly Ash to Minimize Deicing Salt Damage in Concrete Pavements

2017 ◽  
Vol 2629 (1) ◽  
pp. 24-32 ◽  
Author(s):  
Prannoy Suraneni ◽  
Vahid J. Azad ◽  
O. Burkan Isgor ◽  
W. Jason Weiss
Keyword(s):  
Fly Ash ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Concrete Pavements ◽  
Scanning Calorimetry ◽  
Deicing Salt ◽  
Performance Specification ◽  
Hydrated Cement Paste ◽  
Deicing Salts ◽  
Damage In Concrete

Premature damage has been observed at the joints in numerous concrete pavements where calcium chloride and magnesium chloride deicing salts have been used. This damage results from a reaction between the deicing salt and the calcium hydroxide (CH) in the hydrated cement paste. This reaction leads to the formation of an expansive product known as calcium oxychloride (CAOXY). The use of supplementary cementitious materials as a replacement for cement has been proposed to reduce the CH that is available in the mixture to react with the deicing salts. Reducing the CH can reduce the amount of CAOXY that forms. In this study, mixtures representative of paving concrete were made with cements and fly ashes from across the country. CH amounts were determined by using thermogravimetric analysis, and CAOXY amounts were determined by using low-temperature differential scanning calorimetry. Various replacement levels of fly ash were used to demonstrate that the main parameter that influences the amounts of CH and CAOXY that form is the replacement level of fly ash. This paper proposes that a prescriptive specification requiring 35% cement replacement by volume with fly ash would reduce the damage caused by CAOXY formation and further proposes a performance specification to limit the CAOXY formation to below 15 g/100 g paste.

Sign in / Sign up

Export Citation Format

Share Document