Anatomical, physical, and mechanical parameters of clone plantation tree, Cunninghamia lanceolata

BioResources ◽  
2021 ◽  
Vol 16 (2) ◽  
pp. 3494-3519
Author(s):  
Yuanhe Li ◽  
Chao Li ◽  
Yi Song ◽  
Yu Guo ◽  
Lihong Yao
Keyword(s):  
Wall Thickness ◽  
Annual Ring ◽  
Basic Density ◽  
Cunninghamia Lanceolata ◽  
Width Ratio ◽  
Tracheid Length ◽  
Significant Difference ◽  
The Difference ◽  
Tissue Proportion ◽  
Double Wall

Anatomical characteristics of the plantation tree, Cunninghamia lanceolata were studied. Clonal variability and intra-tree variation, as well as its possibilities of application to the wood industry were analyzed for four clones. Tracheid length from the first to 17th annual ring within clones increased rapidly at first, and then plateaued. The maximum value appeared at the 14th annual ring of clone IV (3795 μm), and the minimum value appeared at the 1st annual ring of clone I (849 μm). Tracheid width and tracheid double wall thickness increased first and then tended to be flat or slightly decreased; tracheid length to width ratio showed an overall increasing trend; the variation of tracheid double wall thickness was not significant. Between clones, the variation coefficient of tracheid width, double wall thickness, and wall to cavity ratio were large. The tissue proportion within clones from large to small was the following: tracheid proportion > wood ray proportion > parenchyma proportion, and there was no significant difference between clones. The basic density within clones showed a gradual increase but a certain fluctuation; the difference between clones was not significant. The maximum crystallinity appeared in clone II (sapwood 55.1%, heartwood 51.2%), and the difference between clones was not significant.

scholarly journals Evaluation of physical, anatomical, and biometric characteristics of Citrus sinensis trees in longitudinal and transverse axes of stem

BioResources ◽  
2020 ◽  
Vol 15 (3) ◽  
pp. 5696-5709
Author(s):  
Ali Hassanpoor Tichi ◽  
Habibollah Khademieslam ◽  
Mojtaba Rezanezhad Divkolae
Keyword(s):  
Cell Wall ◽  
Wall Thickness ◽  
Citrus Sinensis ◽  
Fiber Length ◽  
Fiber Diameter ◽  
Basic Density ◽  
Cell Wall Thickness ◽  
Lumen Diameter ◽  
Dry Density ◽  
Significant Difference

Three healthy Citrus sinensis (orange) trees in Babol, Iran, were randomly selected and cut. Two discs of 5 cm thickness were prepared along the tree (breast height and crown). In the transverse direction, the test specimens were cut 2 × 2 cm to 3 cm from the pith to the bark sequentially and examined. The biometric and physical properties were measured, and microscopic sections of wood near the bark were studied using light microscopy according to the International Association of Wood Anatomists’ (IAWA) List. Anatomical examination of the C. sinensis wood showed that the species was a diffuse porous hardwood, with indistinct growth rings, simple perforation plates, alternate intervessel pits, and banded parenchyma. The basic density and oven-dry density increased from the pith towards the tree bark and from the bottom of the tree towards the crown. There was a significant difference in both the transverse and longitudinal directions of the C. sinensis tree in terms of fiber length, fiber lumen diameter, fiber diameter, and cell wall thickness. The mean fiber length, fiber diameter, fiber lumen diameter, and cell wall thickness were 0.76 mm, 23.64 µm, 9.23 µm, and 14.41 µm, respectively.

scholarly journals The Size and The Shape of Sagittal Otolith of Redtail Scad, Decapterus kurroides Blekeer 1855 from Kema Bay, North Minahasa Regency, North Sulawesi, Indonesia

Omni-Akuatika ◽  
2020 ◽  
Vol 16 (3) ◽  
pp. 99
Author(s):  
Fransine B Manginsela ◽  
Gybert E Mamuaya ◽  
Rizald M Rompas ◽  
Lawrence J L Lumingas
Keyword(s):  
Shape Index ◽  
Growth Patterns ◽  
Width Ratio ◽  
Total Length ◽  
North Sulawesi ◽  
Sagittal Otolith ◽  
Significant Difference ◽  
Length Width ◽  
The Difference ◽  
Otolith Size

This study aimed to examine the difference in the otolith size and otolith shape of redtail scad Decapterus kurrodes between sex in North Sulawesi. The otoliths of D. kurroides were studied for sagitta otolith pair samples of 34 juveniles,   58 females and 75 males from Kema Bay. These pairs sagitta otolith images were interpreted using ImageJ tool to describe the otolith size (length, width, perimeter, and area), then we calculated the shape index (form factor, roundness, circularity, rectangularity, ellipticity and aspect ratio or length-width ratio). No significant difference was found in otolith length between left and right otoliths of juveniles of D. kurroides or called symmetrical but significant differences or asymmetrical were found in all sample, females and males. The regressions of total length against otolith sizes (otolith lengt, otolith width otolith perimeter and otolith area of D. kurroides follow a power function. The growth patterns showed dominant allometric growth in total length–otolith sizes relationships of D. kurroides from Kema Bay, Key Words: size, shape index, otolith, Decapterus kurroides, Kema Bay.

scholarly journals PRODUTIVIDADE ENERGÉTICA DA MADEIRA DE Tachigali vulgaris POR CLASSE DIAMÉTRICA EM PLANTIOS EXPERIMENTAIS NA AMAZÔNIA

Nativa ◽  
2018 ◽  
Vol 6 ◽  
pp. 773 ◽  
Author(s):  
Bruna Bárbara Maciel Orellana ◽  
Ailton Teixeira Do Vale ◽  
Joaquim Gonçalez ◽  
Marcelino Carneiro Guedes ◽  
Jorge Breno Palheta Orellana ◽  
...  
Keyword(s):  
Cross Sections ◽  
Basic Density ◽  
Axial Position ◽  
Terra Firme ◽  
Energy Productivity ◽  
Heating Value ◽  
Significant Difference ◽  
The Difference ◽  
Volatile Materials ◽  
The Ideal

Este artigo visa analisar a produtividade energética de dois plantios experimentais de Tachigali vulgaris no Amapá, em ecossistemas e idades distintos, a partir da diferença de classes diamétricas. Foram coletadas 21 árvores (por plantio) distribuídas em 7 classes de diâmetro. Coletaram-se amostras de seções transversais do tronco para analisar a umidade máxima e densidade básica em diferentes posições axiais (base, meio e topo). O poder calorífico superior, densidade energética, materiais voláteis, teor de cinzas e biomassa seca foram analisados por classe diamétrica. Os dados foram avaliados por meio de análise de variância, teste de médias e relações lineares. A média da densidade básica nos plantios foi 581 kg/m³ (cerrado) e 562 kg/m³ (terra-firme). Houve efeito significativo na posição axial apenas no plantio de terra-firme. Somente neste ambiente não houve diferença significativa em materiais voláteis e PCS. No cerrado, a produtividade energética foi superior à terra-firme em todas as classes, devido à diferença de idade e ausência de competição. Em ambos os plantios a produtividade energética foi maior no diâmetro de 22 a 25 cm (classe 4), indicando ser esta a classe diamétrica ideal para colheita da madeira quando o objetivo for o manejo para bioenergia.Palavras-chave: florestas energéticas, biomassa, Tachigali vulgaris, madeira. ENERGETIC DENSITY OF Tachigali vulgaris WOOD BY DIAMETRIC CLASS IN TWO EXPERIMENTAL PLANTS IN THE AMAZON ABSTRACT:This paper aims to analyze the energy productivity of two experimental Tachigali vulgaris plantations in Amapá, in distinct ecosystems and ages, from the difference of diametric classes. 21 trees (by planting) were collected in 7 diameter classes. Samples of cross-sections of the trunk were collected to analyze the maximum moisture and basic density in different axial positions (base, middle and top). The higher heating value, energetic density, volatile materials, ash content and dry biomass were analyzed by diameter class. The data were evaluated through analysis of variance, test of means and linear relations. The means basic density of plantations was 581 kg/m³ (cerrado) and 562 kg/m³ (terra firme). There was a significant effect on the axial position only in the terra-firme planting. Only in this environment there was no significant difference in volatile materials and higher heating value. In the cerrado, the energy productivity was superior to the terra-firme in all the classes, due to the difference of age and absence of competition. In both plantations the energy productivity was higher in the diameter of 22 to 25cm (class 4), indicating that this is the ideal diametric class for harvesting the wood when the objective is the management for bioenergy.Keywords: energy forests, biomass, Tachigali vulgaris, wood.

Studies on the Anatomical Characteristics and Radial Variation of Fast-Growing Toona Ciliate

2012 ◽  
Vol 524-527 ◽  
pp. 2074-2077
Author(s):  
Jin Sun ◽  
Xiao Bo Wang ◽  
Xiao Jing Wang ◽  
Yan Lin ◽  
Zhen Zhong Gao
Keyword(s):  
Wall Thickness ◽  
Radial Variation ◽  
Width Ratio ◽  
Fast Growing ◽  
Vessel Morphology ◽  
Variation Patterns ◽  
Toona Ciliata ◽  
Length Width ◽  
Different Characteristics ◽  
Double Wall

Fiber and vessel morphology and the radial variation patterns of fast-growing Toona ciliata were studied in this paper. The results showed that the average of cell length, tangential diameter, double wall thickness, length-width ratio, wall thickness-diameter ratio of fiber were 1038.00μm,17.43μm,4.03μm,34.13,0.25 respectively, which of vessel were 313.61μm,123.63μm,6.18μm,1.36,0.05 respectively. The radial variation patterns vary between different characteristics.

scholarly journals the Effect of Age and Height on Some Selected Physical Properties of Ethiopian Highland Bamboo (Yushania Alpina)

2018 ◽  
Vol 6 (08) ◽  
Author(s):  
Yohannis Gebremariam Girma ◽  
Dessie Assefa
Keyword(s):  
Moisture Content ◽  
Physical Properties ◽  
Wall Thickness ◽  
Age Groups ◽  
Basic Density ◽  
Raw Material ◽  
Local Livelihoods ◽  
Ethiopian Highland ◽  
Significant Difference ◽  
Materials Used

Ethiopian highland bamboo is a multipurpose and a fast growing plant that supports local livelihoods in many ways. It is a source of food, fodder, furniture, textile raw material, building material, industrial inputs, fuel and other purposes in Ethiopia. Physical properties are considered to be important factors in determining the suitability of bamboo for various applications. A sufficient knowledge of the physical properties of bamboo ensures safe design for materials used in service.  In this study, Effects of age and height on the basic density, moisture content, wall thickness and culm diameter of Ethiopian highland bamboo (Yushinia alpina) were studied on 2, 3 and 4 years-old bamboo. The result of the study show that four years old bamboo had the highest moisture content and wall thickness and the lowest density and culm diameter. Density and culm diameter did not show significant difference between 2, 3, and 4 years of old bamboo. However, variation in moisture content and wall thickness were observed between the three age groups. Density had greatest in bottom and lowest, in the top. There is no variation of moisture content, wall thickness and culm diameter at different height positions (Bottom, Middle and Top).

Cranial crassicaudiasis in two coastal dolphin species from South Africa is predominantly a disease of immature individuals

2020 ◽  
Vol 139 ◽  
pp. 93-102 ◽  
Author(s):  
MF Van Bressem ◽  
P Duignan ◽  
JA Raga ◽  
K Van Waerebeek ◽  
N Fraijia-Fernández ◽  
...  
Keyword(s):  
South Africa ◽  
Bone Development ◽  
Bottlenose Dolphins ◽  
Fatal Outcome ◽  
Population Level ◽  
Cape Coast ◽  
Osteolytic Lesions ◽  
Immune Mediated ◽  
Significant Difference ◽  
The Difference

Crassicauda spp. (Nematoda) infest the cranial sinuses of several odontocetes, causing diagnostic trabecular osteolytic lesions. We examined skulls of 77 Indian Ocean humpback dolphins Sousa plumbea and 69 Indo-Pacific bottlenose dolphins Tursiops aduncus, caught in bather-protecting nets off KwaZulu-Natal (KZN) from 1970-2017, and skulls of 6 S. plumbea stranded along the southern Cape coast in South Africa from 1963-2002. Prevalence of cranial crassicaudiasis was evaluated according to sex and cranial maturity. Overall, prevalence in S. plumbea and T. aduncus taken off KZN was 13 and 31.9%, respectively. Parasitosis variably affected 1 or more cranial bones (frontal, pterygoid, maxillary and sphenoid). No significant difference was found by gender for either species, allowing sexes to be pooled. However, there was a significant difference in lesion prevalence by age, with immature T. aduncus 4.6 times more likely affected than adults, while for S. plumbea, the difference was 6.5-fold. As severe osteolytic lesions are unlikely to heal without trace, we propose that infection is more likely to have a fatal outcome for immature dolphins, possibly because of incomplete bone development, lower immune competence in clearing parasites or an over-exuberant inflammatory response in concert with parasitic enzymatic erosion. Cranial osteolysis was not observed in mature males (18 S. plumbea, 21 T. aduncus), suggesting potential cohort-linked immune-mediated resistance to infestation. Crassicauda spp. may play a role in the natural mortality of S. plumbea and T. aduncus, but the pathogenesis and population level impact remain unknown.

Properties of Gliricidia Wood (Gliricidia sepium) lntercropped with Cocoa (Theobroma cocoa) in Malaysia

2014 ◽  
Vol 11 (1) ◽  
pp. 51
Author(s):  
Mohd Helmy Ibrahim ◽  
Mohd Nazip Suratman ◽  
Razali Abd Kader
Keyword(s):  
Cell Wall ◽  
Specific Gravity ◽  
Moisture Content ◽  
Wall Thickness ◽  
Age Groups ◽  
Gliricidia Sepium ◽  
Cell Wall Thickness ◽  
Tree Age ◽  
Lumen Diameter ◽  
Significant Difference

Trees planted from agroforestry practices can become valuable resources in meeting the wood requirements of many nations. Gliricidia sepium is an exotic species introduced to the agricultural sector in Malaysia mainly for providing shade for cocoa and coffee plantations. This study investigates its wood physical properties (specific gravity and moisture content) and fibre morphology (length, lumen diameter and cell wall thickness) of G. sepium at three intervals according to age groups ( three, five and seven years of ages). Specific gravity (0.72) was significantly higher at seven years ofage as compared to five (0.41) and three (0.35) years age group with a mean of 0.43 (p<0.05). Mean moisture content was 58.3% with no significant difference existing between the tree age groups. Fibre diameter (22.4 mm) was significantly lower (p<0.05) for the trees which were three years of age when compared to five and seven years age groups (26.6 mm and 24. 7 mm), respectively. Means of fibre length, lumen diameter and cell wall thickness were 0.83 mm, 18.3 mm, and 6.2 mm, respectively, with no significant differences detected between trees in all age groups. Further calculation on the coefficient of suppleness and runkel ratio suggest that wood from G.sepium may have the potential for insulation board manufacturing and paper making. However, future studies should experiment the utilisation of this species for these products to determine its full potential.

Perbedaan Penggunaan Antikoagulan K2EDTA DAN K3EDTA Terhadap Hasil Pemeriksaan Indeks Eritrosit

2018 ◽  
Vol 1 (2) ◽  
pp. 114
Author(s):  
Wahdaniah Wahdaniah ◽  
Sri Tumpuk
Keyword(s):  
Screening Test ◽  
Venous Blood ◽  
The Body ◽  
Ethylene Diamine ◽  
P Value ◽  
Cross Sectional ◽  
Significant Difference ◽  
Ethylene Diamine Tetra Acetate ◽  
The Difference ◽  
Index Value

Abstract: Routine blood examination is the earliest blood test or screening test to determine the diagnosis of an abnormality. Blood easily froze if it is outside the body and can be prevented by the addition of anticoagulants, one of which Ethylene Diamine Tetra Acetate (EDTA). Currently available vacuum tubes containing EDTA anticoagulants in the form of K2EDTA and K3EDTA. K3EDTA is usually a salt that has better stability than other EDTA salts because it shows a pH approaching a blood pH of about 6.4. The purpose of this research is to know the difference of erythrocyte index results include MCH, MCV and MCHC using K3EDTA anticoagulant with K2EDTA. This research is a cross sectional design. This study used venous blood samples mixed with K2EDTA anticoagulant and venous blood mixed with K3EDTA anticoagulants, each of 30 samples. Data were collected and analyzed using paired different test. Based on data analysis that has been done on MCH examination, p value <0,05 then there is a significant difference between samples with K3EDTA anticoagulant with K2EDTA to erythrocyte index value. Then on the examination of MCV and MCHC obtained p value <0.05 then there is no significant difference between samples with K3EDTA anticoagulant with K2EDTA to erythrocyte index value.Abstrak: Pemeriksaan darah rutin merupakan pemeriksaan darah yang paling awal atau screening test untuk mengetahui diagnosis suatu kelainan. Darah mudah membeku jika berada diluar tubuh dan bisa dicegah dengan penambahan antikoagulan, salah satunya Ethylene Diamine Tetra Acetate (EDTA). Dewasa ini telah tersedia tabung vakum yang sudah berisi antikoagulan EDTA dalam bentuk  K2EDTA dan  K3EDTA. K3EDTA  biasanya berupa garam yang mempunyai stabilitas yang lebih baik dari garam EDTA yang lain karena menunjukkan pH yang mendekati pH darah yaitu sekitar 6,4. Tujuan dari penelitian ini adalah untuk mengetahui perbedaan hasil indeks eritrosit meliputi MCH, MCV dan MCHC menggunakan antikoagulan K3EDTA dengan K2EDTA. Penelitian ini merupakan penelitian dengan desain cross sectional. Penelitian ini menggunakan sampel darah vena yang dicampur dengan antikoagulan K2EDTA dan darah vena yang dicampur dengan antikoagulan K3EDTA, masing-masing sebanyak 30 sampel. Data dikumpulkan dan dianalisis menggunakan uji beda berpasangan. Berdasarkan analisis data yang telah dilakukan pada pemeriksaan MCH didapatkan nilai p < 0,05 maka ada perbedaan yang signifikan antara sampel dengan antikoagulan K3EDTA dengan K2EDTA terhadap nilai indeks eritrosit. Kemudian pada pemeriksaan MCV dan MCHC didapatkan nilai p < 0,05 maka tidak ada perbedaan yang signifikan antara sampel dengan antikoagulan K3EDTA dengan K2EDTA terhadap nilai indeks eritrosit.

Pengaruh Jumlah Pencucian Beras dengan Kadar Klorin

2017 ◽  
Vol 1 (1) ◽  
pp. 89
Author(s):  
Indah Purwaningsih ◽  
Supriyanto Supriyanto
Keyword(s):  
Mucous Membrane ◽  
Confidence Level ◽  
Iodometric Titration ◽  
Titration Method ◽  
Anova Test ◽  
Average Value ◽  
Significant Difference ◽  
The Difference

Abstract: Chlorine is a green halogen-shaped halogen gas at normal temperature and serves as bleach, stain remover and disinfectant. Chlorine is now widely used for bleaching rice so that less quality rice looks like quality rice. Chlorine is very toxic and causes mucous membrane irritation, highly reactive and very powerful oxidizer. The purpose of this research was to determine the difference of chlorine level in chlorinated rice washed once, twice and 3 times. The sample in this study amounted to 11 samples calculated by replication formula. Each sample was treated 3 times, ie 1 washed once, 2 washed twice and washed 3 times. The samples then examined by iodometric titration method. Based on the results of the study using ANOVA test, 11 samples obtained the average value of chlorine after washed once amount of 0.0176%, after washed twice amount of 0.0111%, and after washed 3 times amount of 0.0052% with the value significance p = 0.03 (p <0.05) at 95% confidence level which means there was a significant difference between chlorine levels in chlorinated rice washed once, twice and 3 times.Abstrak: Klorin merupakan unsur halogen berbentuk gas berwarna kuning kehijauan pada suhu normal danberfungsi sebagai pemutih, penghilang noda maupun desinfektan. Klorin sekarang banyak digunakan untuk bahan pemutih beras agar beras yang kurang berkualitas tampak seperti beras berkualitas. Klorin sangat toksik dan menyebabkan iritasi membran mukosa, sangat reaktif dan merupakan oksidator yang sangat kuat. Tujuan dari penelitian ini ialah untuk mengetahui perbedaan kadar klorin pada beras berklorin yang dicuci sebanyak 1 kali, 2 kali dan 3 kali. Sampel dalam penelitian ini berjumlah 11 sampel yang dihitung dengan rumus replikasi. Setiap sampel diberi perlakuan sebanyak 3 kali, yaitu 1 kali pencucian, 2 kali pencucian dan 3 kali pencucian. Sampel penelitian kemudian diperiksa dengan metode titrasi iodometri. Berdasarkan hasil penelitian menggunakan uji Anova secara komputerisasi terhadap 11 sampel diperoleh nilai rata-rata kadar klorin setelah 1 kali pencucian sebesar 0,0176 %, setelah 2 kali pencucian sebesar 0,0111 %, dan setelah 3 kali pencucian sebesar 0,0052 % dengan nilai signifkansi p = 0,03 (p<0,05) pada tingkat kepercayaan 95% yang artinya ada perbedaan yang bermakna antara kadar klorin pada beras berklorin yang dicuci sebanyak 1 kali, 2 kali dan 3 kali.

P-Removal in Completely Mixed Systems

1985 ◽  
Vol 17 (11-12) ◽  
pp. 325-326 ◽  
Author(s):  
H J. G. W. Donker ◽  
P. Opic ◽  
H. P. de Vries
Keyword(s):  
Mixed System ◽  
Domestic Waste ◽  
Recirculation Flow ◽  
Start Up ◽  
Significant Difference ◽  
Aerobic Reactor ◽  
The Difference ◽  
Positive Effect ◽  
Mixed Systems ◽  
P Removal

Ca. 60 % of the Dutch activated sludge plants consist of completely mixed systems, experiments have been carried out in completely mixed pilot plants to study the biological P-removal. The research was carried out in two pilot plants. The pilot plants consisted of: anaerobic reactor, anoxic reactor, aerobic reactor and a clarifier. All the reactors were completely mixed. Both plants were fed with settled domestic waste water at a sludge loading of 400 and 250 g COD/kg sludge.day respectively. The results are given below:sludge loading (g COD/kg sludge.day)400400250ratio Anaerobic : Anoxic : Aerobic1: 1:2,71:1:4,11:1:2,7P-removal (%)802875N-removal (%)505065COD-removal (%)858585 It has been shown that there is no significant difference between the results at the two different sludge loadings. Remarkable is the difference between the ratio 1:1:2,7 in combination with the internal recirculation flow anoxic-anaerobic of 160 % and the ratio 1:1:4,1 with a recirculation flow of 30 %. During the start-up at a sludge loading of 250 g COD/kg sludge.day and an internal recirculation flow of 30 %, bulking sludge developed almost immediately. The Premoval was completely disturbed. Increasing the internal recirculation flow to 160% had a positive effect on settling properties and P-removal. This investigation has pointed out that a completely mixed system is suitable for biological P-removal, without negatively affecting the nitrification. Important factors in the process are the ratio anaerobic:anoxic:aerobic and the recirculation flows.

Sign in / Sign up

Export Citation Format

Share Document