scholarly journals Feasibility of Formation of Ge1-x-y Six Sny Layers With High Sn Concentration via Ion Implantation

2020 ◽  
Vol 7 (2) ◽  
pp. 65-70
Author(s):  
Randall L. Holliday ◽  
Joshua M. Young ◽  
Satyabrata Singh ◽  
Floyd D. McDaniel ◽  
Bibhudutta Rout
Keyword(s):  
Ion Implantation ◽  
Molecular Beam ◽  
Laser Annealing ◽  
Chemical Vapor ◽  
Synthesis Process ◽  
Direct Bandgap ◽  
Photovoltaic Applications ◽  
Optimal Beam ◽  
Simulation Results ◽  
High Concentrations

By increasing the Sn concentration in Ge1-ySny and Ge1-x-ySixSny systems, these materials can be tuned from indirect to direct bandgap along with increasing electronic and photonic properties. Efforts have been made to synthesize Sn-Ge and Ge-Si-Sn structures and layers to produce lower energy direct bandgap materials. Due to low solid solubility of Sn in Ge and Si-Ge layers, high concentrations of Sn are not achieved by traditional synthesis processes such as chemical vapor deposition or molecular beam epitaxy. Implantation of Sn into Si-Ge systems, followed by rapid thermal annealing or pulse laser annealing, is shown to be an attractive technique for increasing Sn concentration, which can increase efficiencies in photovoltaic applications. In this paper, dynamic ion-solid simulation results are presented. Simulations were performed to determine optimal beam energy, implantation order, and fluence for a multi-step, ion-implantation based synthesis process.

STM studies of crystal growth

1991 ◽  
Vol 49 ◽  
pp. 374-375
Author(s):  
M. G. Lagally
Keyword(s):  
Crystal Growth ◽  
Molecular Beam ◽  
Chemical Vapor ◽  
Sputter Deposition ◽  
Field Of View ◽  
Scanning Tunneling ◽  
Wide Field ◽  
Tunneling Microscopy ◽  
Wide Field Of View ◽  
The One

It has been recognized since the earliest days of crystal growth that kinetic processes of all Kinds control the nature of the growth. As the technology of crystal growth has become ever more refined, with the advent of such atomistic processes as molecular beam epitaxy, chemical vapor deposition, sputter deposition, and plasma enhanced techniques for the creation of “crystals” as little as one or a few atomic layers thick, multilayer structures, and novel materials combinations, the need to understand the mechanisms controlling the growth process is becoming more critical. Unfortunately, available techniques have not lent themselves well to obtaining a truly microscopic picture of such processes. Because of its atomic resolution on the one hand, and the achievable wide field of view on the other (of the order of micrometers) scanning tunneling microscopy (STM) gives us this opportunity. In this talk, we briefly review the types of growth kinetics measurements that can be made using STM. The use of STM for studies of kinetics is one of the more recent applications of what is itself still a very young field.

The relaxation of compressive biaxial strains in SOS via microtwins

1989 ◽  
Vol 47 ◽  
pp. 608-609
Author(s):  
M. E. Twigg ◽  
E. D. Richmond ◽  
J. G. Pellegrino
Keyword(s):  
Thin Film ◽  
Chemical Vapor Deposition ◽  
Molecular Beam Epitaxy ◽  
Compressive Stress ◽  
Vapor Deposition ◽  
Partial Dislocation ◽  
Molecular Beam ◽  
Volume Fraction ◽  
Chemical Vapor ◽  
Silicon Thin Film

For heteroepitaxial systems, such as silicon on sapphire (SOS), microtwins occur in significant numbers and are thought to contribute to strain relief in the silicon thin film. The size of this contribution can be assessed from TEM measurements, of the differential volume fraction of microtwins, dV/dν (the derivative of the microtwin volume V with respect to the film volume ν), for SOS grown by both chemical vapor deposition (CVD) and molecular beam epitaxy (MBE).In a (001) silicon thin film subjected to compressive stress along the [100] axis , this stress can be relieved by four twinning systems: a/6[211]/( lll), a/6(21l]/(l1l), a/6[21l] /( l1l), and a/6(2ll)/(1ll).3 For the a/6[211]/(1ll) system, the glide of a single a/6[2ll] twinning partial dislocation draws the two halves of the crystal, separated by the microtwin, closer together by a/3.

scholarly journals The Al Doping Effect on Epitaxial (In,Mn)As Dilute Magnetic Semiconductors Prepared by Ion Implantation and Pulsed Laser Melting

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4138
Author(s):  
Ye Yuan ◽  
Yufang Xie ◽  
Ning Yuan ◽  
Mao Wang ◽  
René Heller ◽  
...  
Keyword(s):  
Curie Temperature ◽  
Ion Implantation ◽  
Diluted Magnetic Semiconductors ◽  
Laser Annealing ◽  
Magnetic Semiconductors ◽  
Dilute Magnetic Semiconductors ◽  
Pulsed Laser ◽  
Laser Melting ◽  
Co Doping ◽  
Diluted Magnetic

One of the most attractive characteristics of diluted ferromagnetic semiconductors is the possibility to modulate their electronic and ferromagnetic properties, coupled by itinerant holes through various means. A prominent example is the modification of Curie temperature and magnetic anisotropy by ion implantation and pulsed laser melting in III–V diluted magnetic semiconductors. In this study, to the best of our knowledge, we performed, for the first time, the co-doping of (In,Mn)As diluted magnetic semiconductors by Al by co-implantation subsequently combined with a pulsed laser annealing technique. Additionally, the structural and magnetic properties were systematically investigated by gradually raising the Al implantation fluence. Unexpectedly, under a well-preserved epitaxial structure, all samples presented weaken Curie temperature, magnetization, as well as uniaxial magnetic anisotropies when more aluminum was involved. Such a phenomenon is probably due to enhanced carrier localization introduced by Al or the suppression of substitutional Mn atoms.

Graphene nanocomposites: A review on processes, properties, and applications

2021 ◽  
pp. 152808372110242
Author(s):  
Kadir Bilisik ◽  
Mahmuda Akter
Keyword(s):  
Textile Industry ◽  
In Situ Polymerization ◽  
Resin Transfer Molding ◽  
Single Layer ◽  
Chemical Vapor ◽  
Synthesis Process ◽  
Graphene Nanocomposites ◽  
Transfer Molding ◽  
Potential Applications ◽  
Nano Graphene

In this paper, graphene, graphene/matrix, and graphene/fiber nanocomposites, including their synthesis process, fabrication, properties, and potential applications, were reviewed. It was found that several synthesis techniques for nanographene were developed, such as liquid-phase exfoliation and chemical vapor deposition. In addition, some fabrication processes of graphene/matrix and graphene/fiber-based nanocomposites were made, including in-situ polymerization, nanostitching in that single layer nano graphene plate could be interconnected by means of carbon nanotube stitching, resin transfer molding, and vacuum-assisted resin transfer molding. Several properties, including mechanical, thermal, and electrical, on the graphene nanoplatelets materials were summarized in this review paper. It was realized that graphene, graphene/matrix, and graphene/fiber nanocomposites have extraordinary mechanical, thermal, and electrical properties used in advanced engineering applications, including soft robotics, microelectronics, energy storage, biomedical and biosensors as well as textile industry.

Using Molecular-Beam Mass Spectrometry to Study the Pecvd of Diamondlike Carbon Films

1993 ◽  
Vol 334 ◽  
Author(s):  
I.B. Graff ◽  
R.A. Pugliese ◽  
P.R. Westmoreland
Keyword(s):  
Mass Spectrometry ◽  
Vapor Deposition ◽  
Molecular Beam ◽  
Film Growth ◽  
Chemical Vapor ◽  
Carbon Films ◽  
Total Flow ◽  
Measured Concentration ◽  
Molecular Beam Mass Spectrometry ◽  
Diamondlike Carbon

AbstractMolecular-beam mass spectrometry has been used to study plasma-enhanced chemical vapor deposition (PECVD) of diamondlike carbon films. A threshold-ionization technique was used to identify and quantify species in the plasma. Mole fractions of H, H2, CH4, C2H2, C2H6 and Ar were measured in an 83.3% CH4/Ar mixture at a pressure of 0.1 torr and a total flow of 30 sccm. Comparisons were made between mole fractions measured at plasma powers of 25W and 50W. These results were compared to measured concentration profiles and to film growth rates.

Material Properties of Sipos Films Prepared by XeCl Excimer Laser Annealing of a-Si:Nx Films

1996 ◽  
Vol 424 ◽  
Author(s):  
Hong-Seok Choi ◽  
Jae-Hong Jun ◽  
Keun-Ho Jang ◽  
Min-Koo Han
Keyword(s):  
Electrical Conductivity ◽  
Band Gap ◽  
Vapor Deposition ◽  
Material Properties ◽  
Laser Annealing ◽  
Optical Band Gap ◽  
Chemical Vapor ◽  
Rf Plasma ◽  
Excimer Laser Annealing ◽  
Maximum Value

AbstractThe material properties of laser-annealed a-Si:Nx films were investigated. The a-Si:Nx films for laser-annealing were deposited by rf plasma enhanced chemical vapor deposition (PECVD) with NH3 and SiH4 gas mixtures. At the 0.35 of NH3/SiH4 ratio, the optical band-gap was abruptly increased to 2.82 eV from 2.05 eV by laser-annealing which indicates that Si-N bonding comes to be notable at that ratio. The electrical conductivity showed the maximum value of 4× 10-6 S/cm at the 0.11 of NH3/SiH4 ratio where the grain growth and the increase of Si-N bonding are optimized for the enhancement of electrical conductivity. The σP/σD ratio which is related to the defects states for photo generation centers was decreased with increasing NH 3/SiH 4 ratio. Our experimental data showed that the optical band gap and electrical conductivity of laserannealed a-Si:Nx films were dominantly affected by the NH3/SiH4 ratio at the 250 mJ/cm2 of laser-annealing energy density.

Formation of Sic, Si3N4 and SiO2 by High-Dose Ion Implantation and Laser Annealing

1980 ◽  
Vol 1 ◽  
Author(s):  
S.W. Chiang ◽  
Y.S. Liu ◽  
R.F. Reihl
Keyword(s):  
Ion Implantation ◽  
Polycrystalline Silicon ◽  
Laser Annealing ◽  
Pulsed Laser ◽  
High Dose ◽  
Pulsed Laser Annealing ◽  
Transmission Electron ◽  
A Cell ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

ABSTRACTHigh-dose ion implantation (1017 ions-cm−2) of C+, N+, and O+ at 50 KeV into silicon followed by pulsed laser annealing at 1.06 μm was studied. Formation of SiC, Si3N4, and SiO2 has been observed and investigated using Transmission Electron Microscopy (TEM) and Differential Fourier-Transform Infrared (FT-IR) Spectroscopy. Furthermore, in N+-implanted and laser-annealed silicon samples, we have observed a cell-like structure which has been identified to be spheroidal polycrystalline silicon formed by the rapid laser irradiation.

Heterostructures of GaAs and AlAs on Silicon: X-Ray Analysis and Excimer Laser Annealing

1988 ◽  
Vol 116 ◽  
Author(s):  
A. Georgakilas ◽  
M. Fatemi ◽  
L. Fotiadis ◽  
A. Christou
Keyword(s):  
Molecular Beam Epitaxy ◽  
Dislocation Density ◽  
Excimer Laser ◽  
Molecular Beam ◽  
Laser Annealing ◽  
High Resistivity ◽  
Silicon Substrates ◽  
Excimer Laser Annealing ◽  
X Ray ◽  
High Resistivity Silicon

AbstractOne micron thick AlAs/GaAs structures have been deposited by molecular beam epitaxy onto high resistivity silicon substrates. Subsequent to deposition, it is shown that Excimer laser annealing up to 120mJ/cm2 at 248nm improves the GaAs mobility to approximately 2000cm2 /v-s. Dislocation density, however, did not decrease up to 180mJ/cm2 showing that improvement in transport properties may not be accompanied by an associated decrease in dislocation density at the GaAs/Si interface.

Sign in / Sign up

Export Citation Format

Share Document