scholarly journals Designing an industrial protocol to develop a new fat-reduced- ice cream formulation by replacing stabilizers with microbial transglutaminase enzyme

2019 ◽  
Vol 69 (3) ◽  
pp. 162-171
Author(s):  
M. Serdar Akin ◽  
Busra Goncu ◽  
Mutlu B. Akin
Keyword(s):  
Heat Treatment ◽  
G Protein ◽  
Xanthan Gum ◽  
Guar Gum ◽  
Ice Cream ◽  
Titratable Acidity ◽  
Microbial Transglutaminase ◽  
Melting Properties ◽  
Ice Creams ◽  
Coating Color

In this study, the possibility of replacing stabilizers with microbial transglutaminase (MTG) enzyme in fat-reduced ice cream production was studied. In addition, the stage of adding (before or after the heat treatment) the MTG enzyme to ice cream was also investigated. Five different ice creams (A and C containing 1 unit MTG/g protein without stabilizer, B and D containing 0.5 unit MTG/g protein and 0.35 % stabilizer, which also consist of the mixture of Carrageenan (E 407), Guar gum (E 412), Xanthan gum (E 415) and Sodium alginate (E 401), and E (control) containing 0.7 % stabilizer) were manufactured. MTG has been added to samples A and B after heat treatment while it was added to C and D samples before the heat treatment. An experimental analysis related to the overrun, viscosity melting properties, pH, titratable acidity, dry matter, fat, protein, sensorial and microstructural properties of ice creams was carried out. According to the results, the amount and the adding stage of MTG significantly affected overrun, melting, viscosity, coldness, firmness, smoothness, mouth coating, color, appearance, taste, smell scores, and also microstructure of ice creams (p<0.01). Results also showed that MTG could be used together with other stabilizers after heat treatment in the production of ice cream. Moreover, our findings demonstrated that sample B was the closest to control in terms of sensorial properties.

scholarly journals Physical properties and sensory acceptance of red palm olein-based low-fat ice cream added with guar gum and xanthan gum as stabilizers

Food Research ◽  
2020 ◽  
Vol 4 (6) ◽  
pp. 2073-2081
Author(s):  
A.H. Ismail ◽  
S. Wongsakul ◽  
Ismail-Fitry M.R. ◽  
Rozzamri A. ◽  
M. Mat Yusoff
Keyword(s):  
Physical Properties ◽  
Xanthan Gum ◽  
Palm Olein ◽  
Guar Gum ◽  
Value Added ◽  
Ice Cream ◽  
Antioxidant Compounds ◽  
Sensory Acceptance ◽  
Ice Creams ◽  
Red Palm Olein

Red palm olein (RPOL) is rich in nutritional and antioxidant compounds including carotenoids, tocopherols, and tocotrienols which makes it beneficial in food applications. However, to maintain the colloidal stability of RPOL in ice cream is challenging. Therefore, this study was carried out to formulate value-added ice creams supplemented with RPOL (0.1-5.0% w/w) in combination with guar gum (GG; 0.0-0.4% w/w) or xanthan gum (XG; 0.0-0.4% w/w) as stabilizers. Physical properties and sensory acceptance of these ice creams were determined in comparison with selected commercial ice cream samples (CM-ice creams). Ice cream with 0.1% RPOL and 0.4% guar gum resembled CM-ice creams in terms of viscosity (9.08±0.05 Pa.s.), hardness (3.59±3.12 kg), and amount of melted ice cream/30 min (62.00±2.83%). Meanwhile, ice cream with 0.1% RPOL and 0.4% xanthan gum was similar with CM-ice creams in their viscosity (9.19±0.04 Pa.s.) and hardness (0.60±0.25 kg), yet was relatively lower in the amount of melted ice cream/30 min (33.46±5.06%). All ice creams appeared red and yellow due to the presence of RPOL, and the colour intensity was enhanced with the presence of the stabilizers. The RPOL-based ice creams displayed lower score in sensory properties than those of CM-ice creams, thus highlighted the necessary attributes that need to be improved in future studies.

Effects of Culture, pH and Fat Concentration on Melting Rate and Sensory Characteristics of Probiotic Fermented Yellow Mombin (Spondias mombin L) Ice Creams

2007 ◽  
Vol 13 (4) ◽  
pp. 285-291 ◽  
Author(s):  
C.S. Favaro-Trindade ◽  
J.C. de Carvalho Balieiro ◽  
P. Felix Dias ◽  
F. Amaral Sanino ◽  
C. Boschini
Keyword(s):  
Lactobacillus Acidophilus ◽  
Starter Culture ◽  
Ice Cream ◽  
Melting Rate ◽  
Starter Cultures ◽  
Sensory Characteristics ◽  
Freezing Process ◽  
Sensory Acceptance ◽  
Melting Properties ◽  
Ice Creams

Twelve fermented yellow mombin ice creams were produced with different starter cultures (Lactobacillus acidophilus 74-2, L. acidophilus LAC 4 and yoghurt starter culture), final pH (4.5 and 5) and concentrations of added cream (5 and 10%). Probiotic culture stability, melting properties and sensory acceptance were evaluated in ice cream samples. The mixes were frozen and stored for 105 days at -18°C. The melting rates were lower for samples with a pH of 4.5. Both probiotic cultures resisted the freezing process and, although a tendency for the counts to decrease during storage was detected, they were still higher than 10 6 cfu/g after 105 days, even in products with a pH of 4.5. A pH 4.5, 5% cream and L. acidophilus LAC 4 ice cream received significantly higher sensory scores when compared with pH 5, 10% cream and L. acidophilus 74-2 ice cream. The fermented yellow mombin ice cream was a suitable food for the delivery of L. acidophilus strains, with excellent viability and acceptable sensory characteristics.

Physicochemical and Sensory Properties of Ice-cream Formulated with Virgin Coconut Oil

2010 ◽  
Vol 16 (6) ◽  
pp. 531-541 ◽  
Author(s):  
S.Y. Choo ◽  
S.K. Leong ◽  
F.S. Henna Lu
Keyword(s):  
Fatty Acid ◽  
Milk Fat ◽  
Descriptive Analysis ◽  
Coconut Oil ◽  
Ice Cream ◽  
Titratable Acidity ◽  
Total Solid ◽  
Fat Content ◽  
Virgin Coconut Oil ◽  
Ice Creams

The substitution of milk fat with virgin coconut oil (VCO) was used to produce nutritious ice cream with pleasant coconut flavor and aroma. Three formulations were developed whereby formulation VCO4, VCO8 and VCO12 was substituted with 4%, 8% and 12% of VCO, respectively. The physicochemical properties of ice creams analyzed include overrun, meltdown, pH, titratable acidity, total solid, protein and fat content. The fatty acids profile of VCO formulated ice creams and their stabilities over 3 and 6 weeks storage were studied respectively using gas chromatography (GC). Qualitative descriptive analysis (QDA) and consumer affective test were performed among the trained and untrained panelists. Significant differences (p < 0.05) of overrun, pH, total solid, protein and fat content between ice cream formulations were observed except titratable acidity. Increased VCO content in ice cream formulations lowered the melting resistance of ice cream. For GC analysis, the major fatty acid identified was lauric acid. Upon storage time, the concentration of unsaturated fatty acid decreased but the concentration of saturated fatty acid increased. The result of QDA showed that formulation VCO4, VCO8 and VCO12 were significantly (p < 0.05) different in attributes of color, firmness and smoothness as compared to the control ice cream. Formulation VCO12 was highly accepted by panelists in terms of the acceptance level of appearance, aroma, texture, flavor and overall acceptability. Hence, it has a potential marketable value.

scholarly journals The effect of composition, microfluidization and process parameters on formation of oleogels for ice cream applications

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
E. Silva-Avellaneda ◽  
K. Bauer-Estrada ◽  
R. E. Prieto-Correa ◽  
M. X. Quintanilla-Carvajal
Keyword(s):  
Palm Oil ◽  
Numerical Optimization ◽  
Protein Concentration ◽  
Technological Development ◽  
Ice Cream ◽  
Processing Conditions ◽  
Surface Response Methodology ◽  
High Oleic ◽  
Ice Creams ◽  
Oil Type

AbstractThe use of oleogels is an innovative and economical option for the technological development of some food products, among them ice creams. The aim of this study was to establish the best processing conditions to obtain an emulsion which form oleogels with the lowest ζ-potential and average droplet size (ADS) for use as ice cream base. Using surface response methodology (SRM), the effects of three numerical factors (microfluidization pressure, oil and whey protein concentration, WP) and four categorical factors (oil type, temperature, surfactant, and type of WP) on formation of emulsions were assessed. The response variables were ζ, ADS, polydispersity index (PDI), viscosity (η), hardness, cohesiveness and springiness. Additionally, a numerical optimization was performed. Two ice creams containing milk cream and oleogel, respectively were compared under the optimization conditions. Results suggest oleogels obtained from the microfluidization of whey and high oleic palm oil are viable for the replacement of cream in the production of ice cream.

scholarly journals Pharmacological comparison of four biopolymeric natural gums as hemostatic agents for management of bleeding wounds: preliminary in vitro and in vivo results

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Himanshu Kushwah ◽  
Nidhi Sandal ◽  
Meenakshi Chauhan ◽  
Gaurav Mittal
Keyword(s):  
Xanthan Gum ◽  
Guar Gum ◽  
Human Lymphocytes ◽  
Sprague Dawley ◽  
Gum Tragacanth ◽  
Civilian Trauma ◽  
Sprague Dawley Rats ◽  
Cytotoxicity Studies

Abstract Background Uncontrolled bleeding is one of the primary reasons for preventable death in both civilian trauma and military battle field. This study evaluates in vitro and in vivo hemostatic potential of four biopolymeric natural gums, namely, gum tragacanth, guar gum, xanthan gum, and gum acacia. In vitro evaluation of whole blood clotting time and erythrocyte agglutination assay were carried out. In vitro cytotoxicity studies with respect to each gum were done in human lymphocytes to ascertain percent cell viability. In vivo hemostatic potential of each gum (as sponge dressing and powder form) was evaluated in Sprague Dawley rats using tail bleeding assay and compared with commercially available hemostatic sponge. Other important parameters like (a) time taken for complete hemostasis, (b) amount of blood absorbed, (c) adherence strength of developed hemostatic dressing(s), (d) incidence of re-bleeding, and (e) survival of animals were also studied. Results Of the four test gums studied, xanthan gum (@3mg/ml of blood) and gum tragacanth (@35mg/ml of blood) were able to clot blood in least time (58.75±6.408 s and 59.00±2.082 s, respectively) and exhibited very good hemostatic potential in vitro. Except for xanthan gum, all other test gums did not exhibit any significant cytotoxicity at different time points till 24 h. In rat tail bleeding experiments, gum tragacanth sponge dressing and powder achieved hemostasis in least time (156.2±12.86 s and 76±12.55 s, respectively) and much earlier than commercially available product (333.3±38.84 s; p˂0.01). Conclusion Results indicate potential of gum tragacanth to be developed into a suitable hemostatic product.

RESEARCH OF THE POSSIBILITY OF COOKING GLUTEN-FREE COOKIES WITH THE USE OF HYDROCOLLOIDS

2021 ◽  
Author(s):  
А.К. СТРЕЛКОВА ◽  
И.Б. КРАСИНА ◽  
К.Н. СТОРЧЕУС ◽  
Е.В. ФИЛИППОВА
Keyword(s):  
Wheat Flour ◽  
Xanthan Gum ◽  
Guar Gum ◽  
Raw Materials ◽  
Sensory Properties ◽  
Gluten Free ◽  
Water Binding ◽  
Gum Tragacanth ◽  
Confectionery Products

Необходимость разработки безглютеновых продуктов обусловлена ростом численности людей страдающих целиакией, распространенность которой составляет 1 случай на 100–200 человек населения. Решение проблем, возникающих при производстве безглютеновых мучных кондитерских изделий, делает актуальным поиск новых видов сырья, не содержащего глютен и способного улучшать потребительские свойства изделий. В качестве источника безглютенового сырья была выбрана гречневая мука (ГМ). Получено безглютеновое печенье из ГМ в сочетании с различными гидроколлоидами – камедями акации, трагаканта, гуаровой и ксантановой, которые по отдельности добавляли в образцы ГМ в количестве 1г/100 г, и исследовано его физико-химические и сенсорные свойства в сравнении с аналогичными свойствами печенья из пшеничной муки (ПМ). Установлено, что образцы ГМ с добавкой камедей имеют более высокое содержание влаги, а печенье, полученное из смеси ГМ с камедью по разработанной нами технологии, – большую толщину, массу и сниженную прочность при разрушении по сравнению с ГМ и печеньем, изготовленным из нее. При сенсорной оценке качества изделий, проведенной по девятибалльной гедонистической шкале, установлено, что самые высокие показатели качества имеет печенье из ПМ, самые низкие – печенье, приготовленное из ГМ. Внесение камедей улучшило сенсорные показатели изделий на основе ГМ. Лучшим признан образец печенья на основе ГМ с добавлением ксантановой камеди. Таким образом, использование гидроколлоидов улучшает водосвязывающую способность муки и сенсорные показатели изделия – цвет, аромат, вкус и дает возможность получить безглютеновое печенье достаточно высокого качества, сопоставимого с качеством печенья из пшеничной муки. The need to develop gluten-free products is due to the growing number of people suffering from celiac disease, the prevalence of which is 1 case per 100–200 people of the population. Solving the problems that arise in the production of gluten-free flour confectionery products makes it relevant to search for new types of raw materials that do not contain gluten and can improve the consumer properties of products. Buckwheat flour (BF) was chosen as a source of gluten-free raw materials. Gluten-free cookies from BF were obtained in combination with various hydrocolloids-acacia, tragacanth, guar and xanthan gums, which were separately added to BF samples in the amount of 1 g/100 g, and its physical and chemical and sensory properties were studied in comparison with similar properties of wheat flour cookies (WF). The purpose of this work is to obtain gluten-free cookies from BF in combination with various hydrocolloids – acacia gum, tragacanth, guar gum and xanthan gum, which were separately added to BF in the amount of 1 g/100 g, and to study its physical, chemical and sensory properties in comparison with similar properties of cookies from WF. It was found that the samples of BF with the addition of gums have higher moisture content, and the cookies obtained from a mixture of BF with gum according to the technology developed by us – a greater thickness, weight and reduced strength at destruction compared to BF and cookies made from it. In the sensory evaluation of the quality of products conducted on a nine-point hedonistic scale, it was found that the highest quality indicators are cookies made from WF, the lowest – cookies made from BF. The introduction of gums improved the sensory performance of BF-based products. A sample of BF-based cookies with the addition of xanthan gum was recognized as the best. Thus, the use of hydrocolloids improves the water-binding ability of flour and the sensory characteristics of the product – color, aroma, taste, and makes it possible to obtain gluten-free cookies of sufficiently high quality, comparable to the quality of cookies made from wheat flour.

scholarly journals ALTERNATIVES FOR PRESERVATION OF BIOACTIVE COMPOUNDS IN BLUEBERRY PULP: HEAT TREATMENT ASSOCIATED WITH THE ADDITION OF XANTHAN PRUNI

2017 ◽  
Vol 39 (3) ◽  
Author(s):  
JÚLIA BORIN FIORAVANTE ◽  
VANESSA RODRIGUES DUARTE DE SOUZA ◽  
ROSANE DA SILVA RODRIGUES ◽  
PATRÍCIA DE OLIVEIRA DIAZ ◽  
ANGELITA DA SILVEIRA MOREIRA
Keyword(s):  
Heat Treatment ◽  
Antioxidant Activity ◽  
Bioactive Compounds ◽  
Xanthan Gum ◽  
Frozen Storage ◽  
Direct Application ◽  
Commercial Mixture ◽  
Direct Steam ◽  
Activity Preservation ◽  
Monomeric Anthocyanins

ABSTRACT In this study, to increase the preservation of phenolic bioactive compounds and antioxidant activity in blueberry pulp, heat treatment associated with addition of xanthan gum was used. A commercial mixture of blueberries (Powerblue, Climax and Bluegen cultivars) was added with 0.08% (w/w) citric acid and subjected to heat treatment by direct heating until 90 °C in conventional open pan (OP) and by direct application of steam (AS); both with and without the addition of xanthan pruni (OPX and ASX), followed by pulping. Samples of only frozed fruits were considered as control. The five treatments remained under freezing and were evaluated until 90 days of storage for antioxidant activity, phenols, flavonoids and total monomeric anthocyanins. The results show that, with the exception of phenolics, heat treatment with direct steam application and xanthan addition favored bioactive compounds preservation during storage. These factors influenced positively on the anthocyanins stability during frozen storage for 90 days. The xanthan addition favored antioxidant activity preservation; preservation for antioxidant activity by ABTS and DPPH, in all heat treatments, was observed.

scholarly journals FORMULATION AND EVALUATION OF FAST DISSOLVING FILMS OF ELETRIPTAN HYDROBROMIDE

2017 ◽  
Vol 9 (2) ◽  
pp. 59
Author(s):  
K. Pallavi ◽  
T. Pallavi
Keyword(s):  
Drug Release ◽  
Xanthan Gum ◽  
Guar Gum ◽  
Methyl Cellulose ◽  
Synthetic Polymers ◽  
Locust Bean Gum ◽  
Solvent Casting ◽  
Casting Method ◽  
Disintegration Time ◽  
Locust Bean

Objective: The main aim of the present research was to develop an oral fast dissolving polymeric film (FDF) with good mechanical properties, faster disintegration and dissolution when placed on the tongue.Methods: Eletriptan hydrobromide is prescribed for the treatment of mild to a moderate migraine. The polymers selected for preparing films were Pullulan, Maltodextrin (MDX), Acacia, Sodium alginate (SA), Locust bean gum (LBG), Guar gum (GG), Xanthan gum (XG), Polyvinyl alcohol (PVA), Polyvinyl pyrrolidine (PVP), Hydroxyl propyl methyl cellulose (HPMC) E5, and HPMC E15. Twelve sets of films FN1–FN12 were prepared by solvent casting method with Pullulan and combination of Acacia, MDX, SA, LBG, GG, XG, PVA, PVP, HPMC E5 and HPMC E15. Five sets of films FS1–FS5 were prepared using synthetic polymers like PVA, PVP, HPMC E5 and HPMC E15.Results: From all the prepared polymer formulations, FN2, FN8, and FS3 were selected based on disintegration time, and drug release and amongst this three FN2 was optimised based on its disintegration time (D. T). The percent drug release of the optimised film was compared with the percent release of the pure drug.Conclusion: The optimised formulation had a D. T of 16 s and a percent drug release of 97.5% in 10 min in pH 6.8 phosphate buffer and 100.6% drug release in 10 min in 0.1N HCl.

scholarly journals Prestorage Heat Treatment as a Means of Improving Poststorage Quality of Apples

1990 ◽  
Vol 115 (2) ◽  
pp. 265-269 ◽  
Author(s):  
Joshua D. Klein ◽  
Susan Lurie
Keyword(s):  
Heat Treatment ◽  
Ethylene Production ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Optimum Temperature ◽  
Major Benefit ◽  
Solids Concentration ◽  
And Storage ◽  
Soluble Solids Concentration

The benefits conferred by a prestorage heat treatment on poststorage quality of apples (Malus domestics Borkh.) were measured on `Anna', a non-storing early cultivar, and `Granny Smith', a long-storing late cultivar. The major benefit was a decrease in rate of apple softening, both during OC storage and during simulated shelf life at 20C. Soluble solids concentration was not affected by heat treatment, but titratable acidity was reduced. Ethylene production after heat treatment and storage was similar to or higher than that of control apples, but respiration was lower. The optimum temperature and time combination for prestorage treatment of both cultivars was 4 days at 38C.

Sign in / Sign up

Export Citation Format

Share Document